All E'STRUCTS' are moved to common except for ERULES (which is
specific to pcbnew and needs its internal units), still in
pcbnew/eagle_plugin.{h,cpp}
In order to get rid of another boost dependency, this also changes
the parsing of the XML from Boost.PropertyTree to wxXml.
To replace boost::optional, an OPTIONAL_XML_ATTRIBUTE class has
been implemented. This could be replaced with std::optional when
C++17 is ready.
The footprint library cache handler would throw an exception on the
first error it encountered preventing all subsequent footprint files
from being parsed even if there was nothing wrong with them. This
commit queues errors until all of the footprint files in the folder
have been parsed.
Fixes lp:1416736
https://bugs.launchpad.net/kicad/+bug/1416736
This patch adds a radiobox to allow the user to select a reference point for
the move. The additional options are: User Origin (set with <space>),
Grid Origin and Sheet Origin (effectively making it an absolute coordinate).
A checkbox is added (where it makes sense) to allow overriding which point
within the component is put on top of the designated coordinate.
Fixes: lp:1460460
* https://bugs.launchpad.net/kicad/+bug/1460460
If there was a board with no copper layers checked as visible, the
initial GAL cache contained an empty entry for them. In such case,
toggling layers visibility have not changed anything.
The visibility condition check has been moved to ViewGetLOD() method
which serves better the purpose of dynamic visibility checks.
Fixes: lp:1639974
* https://bugs.launchpad.net/kicad/+bug/1639974
Fix incorrect frame deletion, only noticeable when eeschema is run in stand alone mode.
After selecting a footprint using the footprint viewer, the application cannot be closed.
Reason:
the footprint viewer ctor creates an instance (not shown) of a FRAME_PCB.
Unfortunately, this pcb frame was not deleted by Eeschema, in stand alone mode,
preventing the application to be closed because a frame was still active after closing the schematic editor frame.
Now the footprint viewer ctor delete this instance after use, if it was not previously existing.
Move the dialog layout refresh from the ctor to TransferDataToWindow which
is called by event after the dialog object is constructed. This was causing
the 3D view panel to be drawn incorrectly on windows builds.
Remove unnecessary wxT() macros.
Fixes lp:1665888
https://bugs.launchpad.net/kicad/+bug/1665888
Factor out the FP_LIB_TABLE specific content from FP_TBL_MODEL into a new
LIB_TABLE_GRID class that can be used for any library table grid mix in.
Create new FP_LIB_TABLE_GRID object for the footprint library edit dialog.
Add method GetEnvVariables() to return any environment variables found in
a LIB_TABLE object.
These were backwards since internal angles are CCW due to the inverted Y
axis.
The hotkeys have NOT changed. This means 'R' is now clockwise and
'Shift+R' is anti-clockwise. This is the same as EEschema, but not the
same as Legacy mode.
- DIALOG_CHOOSE_COMPONENT has footprint select widget
- FOOTPRINT_SELECT_WIDGET
- FOOTPRINT_CHOICE widget (customized wxComboCtrl)
- FOOTPRINT_FILTER class
- FOOTPRINT_INFO rework:
- FOOTPRINT_ASYNC_LOADER to load without freezing UI
- Rewrite loader threads as queue-driven thread pool
- Make FOOTPRINT_INFO available via kiway
- FP_LIB_TABLE::PrefetchLib
- Access to global fp-lib-table via kiway
- SYNC_QUEUE threadsafe queue template
- Remove KICAD_FOOTPRINT_SELECTOR build option
Removes the need of using the legacy code in polygon/PolyLine.{h,cpp},
refactoring all CPolyLine instances with SHAPE_POLY_SET instances.
The remaining legacy methods have been ported to SHAPE_POLY_SET;
mainly: Chamfer, Fillet, {,Un}Hatch.
The iteration over the polygon vertices have been simplified using the
family of ITERATOR classes.
The zone creation in DRAWING_TOOL was a complex event loop whici
simultaneously managed the event handling, construction of the preview
polygon and the creation and commiting of the zone, all in the same
scope. This has been broken into several pieces:
* POLYGON_ITEM preview item, used to preview the polygon in progress
* POLYGON_GEOM_MANAGER is a class that collects points from user input
and used them to describe a polygon's geometry, including calculation
of 45-degree constrained leader lines
* ZONE_CREATE_HELPER is a class which deals with creating zones based on
geometry from a geometry manager and parameters from the DRAWING_TOOL
* The (much simpler) event loop in DRAWING_TOOL drives the
POLYGON_GEOM_MANAGER. With a minor refactor, this loop can be reused
in future for other polygonal tools if wanted.
The polygon preview now has a translucent fill which makes it easier to
visualise the zone.
This also adds the Close Zone Outline and Delete Last Corner actions as
part of the new event loop.
Fixes: lp:1663885
* https://bugs.launchpad.net/kicad/+bug/1663885
Fixes: lp:1667885
* https://bugs.launchpad.net/kicad/+bug/1667885
This uses the two-point geometry manager to split the logic of the ruler
geometry and the preview item display. This allows the ruler to use that
manager's angle snap feature.
The motivation here is to concentrate display options in the GAL display
settings, ready for removal of legacy canvases. Instead of having the
property as a member of the DRAW_FRAME, with the GAL canvas retreiving
it from there, it is now in the GAL_DISPLAY_OPTIONS struct, and both GAL
and legacy get it from there.
The options for setting cursor shape are then moved out of the general
options dialog, and into the GAL display options widget, where they can
be used in all GAL-aware programs.
GAL cursor shape works on GAL, but not legacy, so the option is now
available on OSX (but only affects GAL, and is labelled as such).
This gives a bit more space to the GAL options in the left panel
Also tidy up some code style and unnecessary default arguments in the
GAL display planel widget.
This adds the microwave tools to GAL in Pcbnew as a new tool:
MICROWAVE_TOOL.
Some new preview items are introduced to support this:
* TWO_POINT_GEOM_MANAGER for managing construction of two-point
geometries, such as that used to construct the inductor.
* CENTRELINE_RECT_ITEM a preview item to draw ractangle with a given
aspect ratio along a line (specified using a TWO_POINT_GEOM_MANAGER)
PCB_TOOL gets a generic event loops which should be useful for more
than just microwave tools:
* doInteractiveItemPlacement() - handles event loops that wait for a
click, create an item on click and then allow moving it
around/flipping, etc.
Fixes: lp:1531323
* https://bugs.launchpad.net/kicad/+bug/1531323
This makes it possible to access the creation functions
for the microwave inductor externally, so that it can be
used from GAL.
Unlike the Gap/Stub tools, the inductor tool is more interactive, and
doesn't just return a MODULE*.
Introduces a new directory in pcbnew called 'microwave' to better
isolate generic (i.e. canvas-agnostic) functions, and a namespace MWAVE
to avoid polluting the global namespace.
This adds a richer overlay to the arc-by-three-points tool in Pcbnew,
including more guide-lines and a live display of radius and angle.
Also included is ability to go back to the previous step (if setting end
angle, you can go back to setting start point, etc) using Backspace, and
Ctrl snaps the start/end angles to 45 degree multiples.
This adds new classes
* MULTISTEP_GEOM_MANAGER: represents a generic "geometry manager" that
builds up some geometrical construction based on a sequence of points.
Used by:
* ARC_GEOM_MANAGER: handles the logical flow of constructing an
arc by centre-point, set radius, set angle. This moves the logic out
of the Pcbnew DRAWING_TOOL event loop in drawArc().
* ARC_ASSISTANT: graphical overlay to communicate current arc shape to
the user during the drawing process
Add typedef for wxCoord to wx.i to enable usage of methods like
EDA_RECT.Inflate.
Added id.h to pcbnew.i to expose window toolbar identifier names.
Added Refresh() and WindowZoom() to pcbnew_scripting_helper.
For a start, this contains the GAL display settings (AA settings and
grid styling).
In future, other modedit-specific settings could go here too.
Fixes: lp:1672150
* https://bugs.launchpad.net/kicad/+bug/1672150
The primary motivation here is to allow other GAL canvas users (eg
Modedit, and soon Gerbview) to be able to easily modify GAL canvas
options.
For now, this doesn't change the display properties dialog in
appearance, but if more GAL options are added, it might need a bit of
tweak and maybe tabs or similar, like Eeschema preferences.
- Pull out compound widget bits into FOOTPRINT_PREVIEW_WIDGET
- Move all pcbnew-specific bits *inside* pcbnew; implementation should
be private for users
- Make a few class members and inner types private
This allows to measure between features on a PCB. It uses a preview
EDA_ITEM in common, but due to the use of the IDs, it's currently
Pcbnew/Modedit only.
This also adds several "utils" for graphical functons useful when
drawing preview items on GAL canvases.
Fixes: lp:1467313
* https://bugs.launchpad.net/kicad/+bug/1467313
This simplifies the (already simple) SELECTION_AREA class. It is also
moved into KIGFX::PREVIEW and put in the common library, where it can be
reused by other GAL-aware tools (not just in Pcbnew) in future.
Reenabled VIEW_ITEMs cache. Previously, the first init was called with
GAL_TYPE_NONE, causing all layers to be set to non-cached. During the
proper init, the layers were already set to non-cached and were not
changed.
The attached patch fixes a bug where triggering InlineDrag while routing
is in progress will crash pcbnew. The problem is that the InlineDrag
event does not terminate performRouting. Once InlineDrag is finished
it will call StopRouting which deletes the m_placer. The Wait() in
performRouting will then return and it will crash as soon as it tries
to access the m_placer.
- The tools can now specify if the items in the selection must be editable/
deletable. This is groundwork to be able to select/delete DRC markers, which can't
otherwise be edited.
- Fixed disappearing of selected objects
BOARD::GetBoundingBox() now directly calls BOARD::ComputeBoundingBox()
and there is a new method BOARD::GetBoardEdgesBoundingBox() used for
call sites that needed to use ComputeBoundingBox( true ) in the past.
This allows COMMON_TOOLS to implement ZoomFitScreen without knowledge
of the BOARD class.
Adds a similar crossprobe as modules has in pcbnew. When clicking a
sheet in eeschema, the items that are exclusive in that scheet will be
selected in pcbnew if using the GAL canvas.
The introduces INDICATOR_ICON, which is a very simple class holding a
bitmap that can toggle on or off.
The ICON_PROVIDER class then provides icons to INDICATOR_ICONS, which
means the class can be used for more than just row indicators.
A default row icon provider is also provided for use in the standard row
selector.
This introduces COLOR_SWATCH, which is a reusable
widget that shows a color swatch and can invoke the colour picker
when duble/middle clicked.
It uses it's own wxCommandEvent to signal the change.
This makes the layer widget simpler internally, and also allows other
code to show identical swatches if needed.
On Linux with recent GTK+ toolkits, these swatches had very wide
borders, resulting in colour swatches of only a few pixels. On OSX, all
borders were disabled, leaving only the swatch.
This commit changes the wxBitmapButton to wxStaticBitmap, which fixes
the issue on Linux GTK+ and also removes the platform-specific element,
as it will now be the same on all systems.
These widgets aren't used as buttons anyway, a single click is handled
across the whole row, not just the swatch. So using a button was not the
most intuitive affordance.
Fixes: lp:1605411
* https://bugs.launchpad.net/kicad/+bug/1605411
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
Call UseDrawPriority( true ) after creating GAL to enable.
VIEW::Add() gets a new optional argument to specify the draw order
when adding an item. If the new argument is left default, the draw
order will increment with each call of VIEW::Add().
Fix std::bind calls after change to VIEW::Add
This just uses the same hatch lines that are built into the zone as
legacy.
They are always drawn, even when there is a fill, as if the fill
doesn't reach the corners, the hatches can be seen.
Fixes: lp:1487043
* https://bugs.launchpad.net/kicad/+bug/1487043
1. If a footprint filter contains a : (colon) character, then the filter is matched against the pattern <LibName>:<FootprintName>
2. If there is *no* : (colon) character present, then it is matched against <FootprintName>
3. The same behaviour applies for the manual filter string in CvPCB
This is used to provide menu entries that allows cancellation of
interactive drawing and routing tools without needing the keyboard.
It is provided in the drawing tools and the router tool.
The cancel event doesn't have any new functionality (e.g. track rip-up
for the PNS router - lp:1448460), this just adds it to the menu, where
it behaves the same as an Escape keypress.
The message of a changed footprint during netlist-import in pcbnew was declared
as RPT_UNDFINED and therefor the filter didn't work correctly ('Warning' was
in the message-string).
This makes the message a proper warning and enables filtering as expected.
This means the dialog can be accessed from both GAL and legacy modes.
This also removes the use of static bools for passing the selection
states and instead used a struct of values passed in by the calling
code.
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
The apply settings and push settings options now take account of the
validity of the global pad settings when deciding whether to show or
not.
Global pad push now requires a source pad and doesn't push from the
global pad setting when there is no selection.
The whole submenu is hidden when there are no enabled items.
Fixes: lp:1664016
* https://bugs.launchpad.net/kicad/+bug/1664016
This allows the user to set a thicker grid line without causing the
grid lines to become over dense, or just make the grid denser according
to preference.
The term "density" is modified to "minimum grid spacing", which is
the pixel spacing between adjacent grid lines.
The spacing settings now comes in along, with other GAL display settings,
as part of GAL_DISPLAY_OPTIONS observer functionality. To this end, the
setter in GAL interface is removed, as an external user should be
setting this parameter via the GAL_DISPLAY_OPTIONS interface.
This adds a user-settable control for the grid line thickness on GAL
canvases to the display options dialog.
The thickness settings now comes in, along with other GAL display
settings, as part of GAL_DISPLAY_OPTIONS observer functionality. To this
end, the setter in GAL interface is removed, as an external user should
be setting this parameter via the GAL_DISPLAY_OPTIONS interface.
Fixes: lp:1662482
* https://bugs.launchpad.net/kicad/+bug/1662482
This class, INCREMENTAL_TEXT_CTRL, is used to provide a frameworks for
classes that want to control a text control that can be incremented
according to some scheme.
Also provided is a wxWidgets implementation with spin buttons for
control, as well as mousewheel support.
The mappings from enums to control settings can be done in static
functions, which makes the set/retreive functions more concise, and also
puts the mapping functions in a clearly delineated place.
This puts the graphical/display options with the other similar options
in that dialog, rather than with the dimension options found in the Set
Grid dialog, which is in the Dimensions menu.
Also place the option itself in the GAL Display Options structure, so it
can be updated using the observer mechanism there.
The setter for the style in the GAL interface is removed, as the public
interface for setting this option is now to modify the
GAL_DISPLAY_OPTIONS structure and notify the GAL when done.
The GAL_DISPLAY_OPTIONS member of EDA_DRAW_FRAME is a private member and
is used in only a couple of places in the class. The real use of this
member is by a by-ref interface, GetGalDisplayOptions.
Because te GAL options are used by a very select few users of
EDA_DRAW_FRAME, it makes little sense to force all the (many) files
including draw_frame.h to also include gal_display_options.h, when the
vast majority have no need for it.
This massively speeds up compilation of the project when
gal_display_options.h is changed.
More isolation could be acheived by separating the GAL config types (eg
OpenGL antialias modes and grid style) from the options header, as,
although the GAL class uses them, not many includers of the GAL header
need the options struct as well.
This commit brings several changes:
- Add a footprint preview pane to the eeschema component selector
- Upgrade component list to wxTreeListCtrl
- Factor out wxTreeListCtrl subclass TWO_COLUMN_TREE_LIST which
patches a column size bug
- Linkify datasheet URL in info pane
This patch fixes a problem with GAL where zones are ignored in ratsnest
calculation.
The problem is that calling RN_DATA::Update on a zone with no polygons
(an unfilled zone) will remove the zone successfully, but then
RN_DATA::Add is a no-op.
From this point on, because ::Update refuses to work on items that have
not been ::Add'ed, the zone is removed entirely from ratsnest
calculation and will only be reconsidered once it is explicitly ::Add'ed
again.
The fix is to explicitly create an empty RN_ZONE_DATA object for every
zone that is ::Add'ed.
A second problem is that the point editor forgot to call
RN_DATA::Recalculate after calling Fill_Zone.
Fixes: lp:1537120
* https://bugs.launchpad.net/kicad/+bug/1537120
When attempting to read a pcad file exported from Altium, kicad was
segfaulting because it was trying to access an empty array. This patch
fixes that.
The reason the array was empty was the the board outline in the pcad
file was composed of only arcs and the plugin only processes lines in
the board outline. Adding this functionality is for another patch I
suppose.
Signed-off-by: Clemens Koller <cko@embeon.de>
Modifies the selection menu to be adaptive and disable selection options
that are not possible.
Adds a new selection option that is only available when selecting
modules, this tool will select all footprints on the same sheet level or
belonging to subsheets. It will also search for nets that are only
connecting between modules on the same sheet or lower and select every
segment and via belonging to it.
This action launches the normal interactive zone tool, but re-uses the
settings from an existing zone, based on a flag passed to the main zone
function.
Break a chunk of the new zone tool out into a separate function to keep
the code clear. When zone cutouts and similar zone tools are added,
they'll get the settings from existing zones.
This commit now used std::unique_ptr for the temporary zone item, which
simplifies handling of the ownership of that item.
This commit wires up the as-yet-unused "remove alternate" tool action
and uses it to select copper connections (normally 'U') before deleting
segments.
THis also reverses the sense of Delete and Backspace (Delete used to be
'remove' and Backpace was 'remove alt', now it is reversed). This means
that backspace is the key that removes a segment and Delete removes the
track. This is the same as legacy behaviour. Other delete actions are,
for now, the same between Delete and Backspace.
Fixes: lp:1517213
* https://bugs.launchpad.net/kicad/+bug/1517213
The previous behaviour was to act on only the first item in the
selection. The new behaviour is to act on every eligible item (in this
case, tracks and vias).
Provide a visual feedback to the user how each rotation
will affect the routing by immediately reflecting the
change in ratsnest orientation.
Signed-off-by: Aurabindo J <mail@aurabindo.in>
Fixes: lp:1663488
* https://bugs.launchpad.net/kicad/+bug/1663488
The attached patch fixes a minor bug where opening the 'View' menu
will sometimes revert the canvas to the default canvas. The problem is
that wxMenuItem::Check will cause a menu event when the status is changed even
if the checkmark is being *unset*. The workaround is to only call Check with
a true argument. This works because the menu items are radio buttons.
This makes "rotate" into two separate TOOL_EVENTs, which each have a
"multiplier" parameter.
Also added is a namespace for 'free functions' that use TOOL_EVENT
public interfaces (perhaps with other inputs too) to centralise some
decision-making and calculations.
Fixes: lp:1660731
* https://bugs.launchpad.net/kicad/+bug/1660731
Automatically switch to a drawing layer, if a copper layer was
preselected. No annoying message boxes.
Do not deactivate the tool on layer switch.
Replaced setting updatePreview with direct calls to VIEW::update
Line width is kept in m_lineWidth for all shapes.
Arc centres don't land in the bounding box when the arc angle is small.
Currently, there are added to the BB, which leads to surprising
selection beheviour of arc segments (the BB can be much larger than
expected).
This commit omits the arc centre from the calculation.
Fixes: lp:1492734
* https://bugs.launchpad.net/kicad/+bug/1492734
Import becomes apply and export becomes copy.
The term "push" to apply settings globally has not been renamed.
Swap the order of the copy and apply in the context menu.
Perviously, the generic snapping code would choose the nearest of the
module origin and origin of each module pad when selecting a module
using the "Find module" tool (T hotkey).
This is unlikely to be expected unless the cursor is already near the
correct pad or the module centre.
New behaviour is to pick up by module origin first, then
select the module. This means that the cursor is already nearest the
main module origin anchor, so that is what will be used.
Fixes: lp:1571214
* https://bugs.launchpad.net/kicad/+bug/1571214
If a line has zero thickness, use the outline thickness to draw it.
This avoids having invisible items on the PCB that could still end up in
outputs, or "losing" an item by setting thickness to 0.
This only affects GAL drawing routines, the PCB data structures are not
affected, so any outputs will be the same.
Fixes: lp:1501749
* https://bugs.launchpad.net/kicad/+bug/1501749
- Move Select All buttons, after discussion in IRC found that numerous
users are unclear on exactly what those buttons would do. The <<< in
them was an attempt to associate them with a listbox, but in reality
created an association in the user's mind with the above "move" actions.
- Spacing, punctuation adjustments
DIALOG_EXCHANGE_MODULE class now has its own header file in the
pcbnew/dialogs directory, and the xchgmod.cpp files was moved along with
it. This has two aims:
* (minor) Standardise the location of "base dialog" derived classes,
like most other dialogs in KiCad.
* (major) Allow inclusion of this dialog class into both legacy-mode
pcbframe.cpp and into GAL tools.
Setfocus now works on macos dialogs by setting DLGSHIM_USE_SETFOCUS.
This option is only enabled __WXMAC__ is defined.
FixOSXCancelButtonIssue() is now called inside DIALOG_SHIM::SHOW.
All other calls from within the dialogs were removed.
Oliver Walters
Maciej Suminski
Alejandro García Montoro
jean-pierre charras
Wayne Stambaugh
Marco Ciampa
Eldar Khayrullin
Robbert Lagerweij
Miles McCoo
Lachlan Audas
Chris Pavlina
Collin Anderson
Jon Evans
John Beard
Tomasz Włostowski
Julius Schmidt
José Ignacio Romero
Simon Richter
Cirilo Bernardo
Kristoffer Ödmark
Marco Sterbik
Dick Hollenbeck
hauptmech
Jean-Samuel Reynaud
Aurabindo J
Maciej Suminski
Nick Østergaard
Diogo Condeco