1) Expand the accuracy to at least the grid spacing
2) Move pin-selects-symbol logic to Selectable()
3) Recode pick-closest algorithm to handle exactHits and inexactHits
separately
4) Remove pin target from bounding box in favour of expanding it to
at least as wide as the pin decoration (this prevents the accuracy
off the end of the pin from growing too large)
Also removes the message bar display of assigned netclass for
buses and bus-to-bus entries.
Also fixes a bug where assigning a netclass via the canvas only
looked at the first level of bus members (and not any nested
members).
Also fixes a bug where the bus name validator tried to validate
a vector bus first -- which doesn't work as a vector bus may be
nested in a group bus.
Also fixes a bug where we were failing to check for illegal
chars in bus definitions which otherwise passed the bus parsers.
See additional comments in the bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
While it would make more sense to have them both use the old canvas
algorithm (of only assigning to the members), I'd be *very* hesitant
to change the Setup Dialog and underlying machinery this late in the
6.0 release.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
Escaping the document file (.dcm) alias names breaks the link between the
document file and the library (.lib) file. This causes the information in
the document file to be lost.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9130
When opening new schematic, the undo/redo list is invalidated.
CleanupSchematic uses it before presenting the new schematic to the
user, so we need to make sure that old data are not preserved here past
their pointer lifetimes
Global labels can optionally have intersheet references. When enabled,
they expand the bounding box of the label. Because they can be far away
from the actual label, the bounding box is not a good approximation for
the hittest
We have two cases where we might be requesting a disambiguation menu.
In one case, we already have the event loop waiting and we need to run
the selectionMenu through the action system. In the other case, the
tool isn't on the stack and won't activate. Here we need to run
directly and we are assured of not crashing because the tool isn't
active.
Fixes https://gitlab.com/kicad/code/kicad/issues/9154
Mac already uses diverse font sizes (for instance, smaller fonts for
radio button groups), and the anti-aliasing is a lot better. The
other platforms need a more limited range of sizes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
Moving points should not be overrided by disambiguation menu, so we
track where the disambiguation event started and only trigger the menu
if the mouse hasn't moved a full unit in x/y
Fixes https://gitlab.com/kicad/code/kicad/issues/9132
Previously, we were checking if the selection tool was the top of the
stack but this ignored many other "secondary" tools that might be
running such as the point editor. These still allow the selection tool
to handle events such as clicks. This change allows the selection tool
to handle clicks when it is the primary tool on the stack rather than
the top
Fixes https://gitlab.com/kicad/code/kicad/issues/9110
This standardizes selection tools in SELECTION_TOOL class to be able to
handle a long-click as asking for a non-heuristic disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/8490
- Update sch text help (~~ no longer gets converted to single ~)
- Update Eagle importer to correctly handle new overbar syntax
- Update CADSTAR importer to correctly handle new overbar syntax
This function attempted a poor-man's natural compare but it assumed
specific structure of the string. This broke for strings with
numberings that looked like decimals.
Instead, we use our natural string comparison function and remove the
references to this older function and its similar elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/9067
ADDED Junction Size and Color to Edit Text & Graphics properties.
The added feature is only because it's the only way to recover from
the buggy behaviour having changed all your junctions to overridden
values.
Also adds help texts to the Junction Dot Properties dialog to
specify how to get schematic dot sizes and eeschema colors.
Also fixes the terminology in the Line/Wire/Bus Properties dialog
(the default widths come from the netclasses, not from eeschema).
Fixes https://gitlab.com/kicad/code/kicad/issues/9040
Don't show the clean up sheet pins context menu entry when the selected
sheet doesn't have any pins to clean up.
Remove sheet has no pins to clean up nag dialog now that the context menu
entry isn't shown unless there are pins to clean up.
Seems to cause issues on Windows where the animation locks the screen.
Doesn't effect Linux, possibly because wxWidgets uses a native GTK
infobar that doesn't animate anyway.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8987
We require API compatibility in the ngspice library because we
dynamically load the library and assign function pointers to specific
names/signatures. This should be consistent for all versions of the the
library until the soversion changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8878
Having the logic split between three different paths was
a bit much, this should hopefully be a bit easier to
maintain. All save logic now goes through SaveProject;
individual file writing is now a private function.
Also change Save As to Save Copy As in project manager
mode, as we don't want to change projects from inside
the editor in project manager mode.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9015
For historical reasons they are stored in a string using spaces as separators.
So each fp filter is now escaped to remove spaces (replaced by {space})
Fixes#9009https://gitlab.com/kicad/code/kicad/issues/9009
Add control of project creation to Eeschema; change defaults
to enable project creation in both programs. Properly set
project on newly-created schematics so "Save As" doesn't
get triggered repeatedly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9000
Previously this was done using a static variable, which was not loaded
from .kicad_pro on simulator launch, causing unexpected behavior
Fixes https://gitlab.com/kicad/code/kicad/issues/8799
A info banner is now shown (in synchronized mode) to inform an user when extra
pins are added to other units when a new pin is added.
A good info about the synchronized mode is not easy to create.
When swapping SCH_SYMBOL objects during undo, no special processing is
required. The SCH_PIN objects are updated when the LIB_SYMBOL objects
are swapped and the call to SCH_SCREEN::SwapSymbolLinks() didn't do
anything.
This has actually been there since dot, but the old escaping method
just deleted chars it didn't like so you could run it as many times
as you wanted.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
Creates a script that will fomat the MacOS icons at 80% of the total
size in line with Apple's guidelines.
Script requires Inkscape 1.0 and png2icns (available on Linux boxen)
Fixes https://gitlab.com/kicad/code/kicad/issues/7977
This allows the workflow:
1) Edit symbol in schematic
2) Save As to original library
Also allows the user to quickly overwrite a symbol they don't want,
either by importing over the existing symbol or creating a new one.
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8844 (power port text positioning, only use 0, 90deg for text)
Adjust text justification due to rotation on import
Set field position through SCH_FIELD::SetPosition
Honor hidden net names at power ports
Calculate start/end points for imported arcs in symbols
FIXED: Previously, when the symbol editor frame gains focus it will
unselect the library tree selection unconditionally. This is annoying
when adding a new library and then new symbol to a freshly-opened symbol
editor with no other symbol being edited. Anything that gives the editor
focus will deselect your library before you can add a symbol to it.
CHANGED: When creating a new library, the usual intention is to add a
new symbol to it. Without this, the "No symbol library selected."
message will appear if the user attempts to add a new symbol without
manually selecting their new library.
The first time a DIALOG_SHIM was created, with a given size, this size
was not taken in account. This this is now forced.
(when recreated during a session, this is the last dialog size that is used)
This prevents RecalculateConnections from getting called twice before
we run the logic. In that case the driver would change on the first
recalc, and then it would look like it didn't change on the second (which
is where we were checking).
Fixes https://gitlab.com/kicad/code/kicad/issues/8812
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
When doing a schematic cleanup, for instance, we were breaking wires
and pushing undo records on to the stack. Needless to say, this was
pretty unexpected for the rest of the undo framework and caused all
kinds of mayhem (including crashes in some cases).
Fixes https://gitlab.com/kicad/code/kicad/issues/8704
1) Fix a couple of bugs in case processing
2) Make case processing more explicit to prevent more (1)
3) Move label processing to AltiumSpecialStringsToKiCadVariables
4) Strip double-quotes from special strings (and add test cases)
5) Change PROJECTNAME to just filename, not full path
6) PROJECTREV and REVISION are two different things
7) Add support for Altium's Application_BuildNumber
8) Fix some issues in trimming spaces around special strings
ADDED CURRENT_DATE titleblock token (to go with existing ISSUE_DATE)
ADDED PROJECTNAME schematic token (to go with FILENAME and SHEETNAME)
Converts other parameters to project text variables.
Jeff Young
jean-pierre charras
Wayne Stambaugh
Seth Hillbrand
Jon Evans
Roberto Fernandez Bautista
Sylwester Kocjan
Mikolaj Wielgus
Marek Roszko
Mike Williams
Stefan
david-beinder
luz paz
Thomas Pointhuber