// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Check user write permissions before saving project, board, and footprint
library files.
* Append read only to file name and path in title bar when the user
does not have write privileges.
* Rename class WinEDA_ModuleEditFrame to FOOTPRINT_EDIT_FRAME.
* Lot's of Doxygen comment and coding style policy fixes.
* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Changed managed cursor callback definition to include the current
cursor drawing position.
* Modified all managed cursor callbacks to match new definition.
* Added snap to grid option to base drawing frame object.
* Changed add no connect managed cursor callback to use new position
parameter instead of the stored one.
* Lots of coding policy fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
* Fix a minor problem with wxFileDialog to open a file that no longer
exists in PCBNew.
* Make GerbView open file behavior the same as PCBNew.
* Remove redundant PCB file wild card definition.
* Add open file refactor task to the todo list.
* Fix some minor code formatting issues.
* Make USE_WX_ZOOM clipping routine actually clip rather than just test
if line needs drawn.
* Clean up as many USE_WX_ZOOM #ifdefs as possible.
* Minor coordinate rounding improvements.
* Minor scrolling and panning improvements.
* Remove unused KicadGraphicContext object code.
* Implement code to allow wxDC to handle coordinate conversions between
device and drawing units.
* Add build settings to enable wxGCDC for wxGraphicsContext testing.
* Remove wxAUI conditional build cruft as it is now required to build
Kicad.
* Fix scroll increment size regression to prevent jumping around the
zoom center position.
* Add find GDI+ cmake module for building on WXMSW when wxGraphicsContext
is enabled.
* Create single event handler for grid size events.
* Fix all frame windows to use new grid size event handler.
* Use offset relative to ID instead of ComboBox index to save last grid size.
* Move last grid size load/save setting into WinEDA_DrawFrame.
* Add equality and assignment operators the GRID_TYPE.
* Add current grid helper methods to BASE_SCREEN.
* Add GetPins helper to LIB_COMPONENT to replace GetNextPin where applicable.
* Add AppendMsgPanel helper to WinEDA_DrawFrame.
* Improve rounding for display of coordinates when millimeter units are selected.
* Split out application specific command IDs to prevent unnecessary rebuilding.
* Eliminate duplicate menu and tool bar command IDs.
* Split component library editor and viewer definitions to separate header files.
* More component library and document file merge code.
* A bunch of minor string readability and consistency fixes.
Dick Hollenbeck
jean-pierre charras
Wayne Stambaugh
Vladimir Ur
Marco Mattila
Marco Serantoni
stambaughw