The current module cannot be queried for existing pads as we
add them (because we never commit, until we finish the whole array).
Instead, pre-gather the names and check as we add, skipping any existing
names.
Note: this will not prevent arrays becoming "mis-ordered", but there
is not a lot we can do to prevent all possible errors.
Fixes: 1808706
* https://bugs.launchpad.net/kicad/+bug/1808706
The same principle could be used to skip existing ref-des'es on PCBs.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
Move into own include directory for clarity. Also allows qa_utils
to use its own private headers in qa/qa_utils without exposing them
through the target_include_directories directive.
This test assumed points on a edge are counted as colliding.
This is not true: points on an edge are NOT counted at inside
the poly_set.
THe test does still consider points on a *hole* edge as collisions.
The API to SHAPE_POLY_SET is unclear on if this is correct.
Several pcbnew_tools utilities read a file from the command line.
Instead of replicating this code, centralise the code in
qa_pcbnew_utils, which allows simpler reuse.
THe utilities are:
* polygon_triangulation
* polygon_generator
* drc_tool
pcb_parser keeps its own function, as that is the focus of the tool,
and its likely to have its own instrumention.
This also adds the ability to read from stdin for the above tools,
which means fuzz testers could theoretically work with them, and it
also can make life easier if you can pipe a board to the executable
directly.
The "refactor" element of qa_shape_poly_set_refactor has been
previously removed, so these tests are now just regular tests on
libcommon classes. These can therefore be moved to qa_common
and the qa_shape_poly_set_refactor unit test suit can finally be
totally removed.
This adds a simple unit test to qa_common to check coroutines
produce expected events in the right order.
This is an automated analogue to the user-facing tool in
qa/common_tools.
This program has been disabled for some time, but it's not
broken (even if the CMake was!).
Merging into the pcbnew_tools QA program reduces the CMake burden
and puts this tool in the same place as the others.
This means all the current Pcbnew utilities are all in a single
executable.
The tool is now run by:
$ qa/pcbnew_tools/qa_pcbnew_tools pcb_parser <same arguments as before>
Add a tool that allows a user to run DRC functions
on a given KiCad PCB file.
The first available functions are the courtyard functions.
Also move most of the utility program logic into qa_util for
better reusability.
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
This reverts commit decc7ed888.
This compilation options (-fpermissive) is no longer needed,
as the code that caused the warnings on GCC <7 is no longer
present.
The reason this error was GCC bug #56480 [1], which disallowed
the following (valid, in C++11) syntax:
template<> struct namespace_a::namespace_b::a_struct<TYPE>
{...}
And instead insisted on:
namespace namespace_a {
namespace namespace_b {
template<> struct a_struct<TYPE>
{...}
}
}
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
An unhappy conjunction of GCC bug #56480 [1] and Boost having
different namespaces for the print_log_value make it quite
ugly to support this method.
For the limited purposes of the unit tests, a free function in
the unit_test_utils header (in the absence of any implementation
in the main libraries) will do, even if it is a little intrusive.
From Boost 1.64 onwards, the customisation point boost_test_print_type
is avaiable, and anyt print functions should be transitioned over to
that method when the minimum Boost version is 1.64 or higher.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
Test a few "centre-point-angle" cases and add some
generic geom code for testing vectors and boxes are within
tolerance (since rounding often creeps in).
Much of the arc-checking code will be useful to other
construction methods (e.g. point-point-point).
There are expected failures for the bbox code when
the arc passes though, but does not end on, a quadrant point
(0, 90, 180, 270). This is due to a defective
implementation of SHAPE_ARC::BBox() that does not take
into account the quadrant points. This will be fixed
as a follow-up.
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
This adds a unit test for the recent AddFileExtListToFilter
to demonstrate how to use it and the expected output.
The unit tests are a bit clunky, as the vararg approach cannot
work winth strings passed at runtime.
It was added when refactoring the SHAPE_POLY_SET class, ande replace any use of CPolyLine class inside Kicad code.
the CPolyLine related code is now not used.
So this test nowadays makes no longer sense.
Also modify the linkage of kiface objects, as this is not
supported by older CMake versions.
This was accidentally removed with the reversion of the application
of the wrong patch (8f11a2133).
QA: fix object files
Some functions aren't defined on Boost < 1.59, which is
sadly inclusive of the Ubuntu LTSs.
Make some guards so you can still use these on the newer
Boosts with some useful fallback where possible.
Devolve the logic as to whether a pad should be numbered or not
to a pad utility function. Add a very simplistic test for this
function (demonstrating how to test BOARD_ITEMs in general).
Fixes: lp:1804787
* https://bugs.launchpad.net/kicad/+bug/1804787
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
This includes:
* Linkage against the Boost unit test libs
* Configuration of the Boost libs
* A place for common generics "extras" for unit test harnesses
including
* A simple way to allow "expected-failure" tests (without
breaking Boost < 1.58, e.g. Ubuntu LTS)
* Moving some simple numeric predicates from the geom tests
to the utils library.
Expand unit test docs to describe the expected failures macro.
Add a few COLOR4D tests, including one with expected failures due
to a pre-existing bug. This will be fixed in a follow-up commit.
Add some unit tests on TITLE_BLOCK
This commit also requires some mocks so the libcommon stuff
can work:
* Needs a Kiface() function to be linkable
* Needs some stuff from common to be build specially
* Needs to define itself as one of the unit-having programs
to appease the units defines.
If qa_utils is not explicitly declared with STATIC, the build
fails in environments where the BUILD_SHARED_LIBS CMake option is
present and set to "ON". An example of this is Fedora COPR.
This adds an io-benchmark case of the STRING_LINE_READER
class, which reads a file into a std::string, *then*
reads it line by line.
As expected, due to it all being in memory, this is very fast.
Also fixes an issue in io_benchmark where the input file
must be in the current dir.
John Beard
Jeff Young
jean-pierre charras
Seth Hillbrand