10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
00ed75b891
Fix DRC performance with multi-layer keepout zones.
...
The main issue was a parameter mismatch which caused On^2 behaviour
for zone layers.
But there are several other performance optimizations here, along
with status bar updating for zones while running the dissallow test.
Fixes https://gitlab.com/kicad/code/kicad/issues/8521
2021-06-02 14:11:43 +01:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b65b1f8e9c
Revert NPTH commit, and add some comments.
2021-04-26 17:33:49 +01:00
e3eacafbcb
Run hole clearance tests on NPTH pads, but not copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
2cde76a191
Don't do any hole clearance testing within a single footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
6d6765cdaf
Improve DRC status reporting.
...
1) Don't report on tests not run.
2) Don't cancel subsequent tests because the current test didn't
have any constraints
3) Exit a little bit quicker when cancelled
Fixes https://gitlab.com/kicad/code/kicad/issues/7724
2021-02-27 13:44:45 +00:00
4ede4e061e
More DRC performance work.
...
Push DRC zone RTrees into BOARD so that they can also be used by
insideArea.
All these caches are a bit of an encapsulation leak, but they make a
significant impact on performance.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-27 11:45:04 +00:00
d523129929
Minor performance improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 17:58:08 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
8571687f51
Upgrade place via tool to new DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7358
2021-02-01 23:00:13 +00:00
23c6dbff38
Need to check track/track clearance
...
The misplaced else prevented non-track/track intersection clearances
from being reported
Fixes https://gitlab.com/kicad/code/kicad/issues/7376
2021-02-01 10:08:27 -08:00
2d8cac658e
Allow negative clearances to signal supression of DRC test.
2021-01-23 00:10:01 +00:00
da4b269783
Make sure pad local clearances get in to m_worstClearance.
2021-01-13 12:37:20 +00:00
33aa6edb01
Don't run clearance tests on unflashed NPTH pad layers.
2021-01-04 00:03:21 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
8300e17b69
Fix botched attempt to report hole violations between no-net items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6851
2020-12-26 16:24:51 +00:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
4c5567a627
Allow colliding pads in netties as well as graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 19:44:02 +00:00
dadfe03804
Reinstate 5.1 net-tie hack since "real" net-ties got pushed to 7.0.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6556
2020-11-30 16:11:15 +00:00
3989c19c41
Don't test pad:track clearances in pad tester.
...
They've already been tested in the track tester.
Fixes https://gitlab.com/kicad/code/kicad/issues/6554
2020-11-30 14:38:06 +00:00
e09271ca0e
Fixes for hole clearance and hole-to-hole tests.
...
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
e4d0ffd607
Retire old SKIP_STRUCT filtering.
...
We already added the checkedPairs stuff which deals with a:b vs b:a
better, and the SKIP_STRUCT version had side-effects between the two
tests.
Fixes https://gitlab.com/kicad/code/kicad/issues/6539
2020-11-29 00:08:23 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
533d344e3f
Honour pad falshing when colliding with DRC RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6443
2020-11-19 23:55:14 +00:00
bfc4afc506
Restore the 5.1 NetTie hack.
...
We really need to do first-class net ties....
Fixes https://gitlab.com/kicad/code/kicad/issues/6416
2020-11-17 20:07:21 +00:00
b2d86ec7c9
Don't double-check DRC clearances (a:b and b:a).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6417
2020-11-17 16:58:39 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
ae9afdd169
SNR. (Mostly for progammers, but a little for user messages.)
2020-11-02 16:20:00 +00:00
c351b3c31f
Naming conventions.
2020-11-01 14:12:35 +00:00
f600450ee6
DRC_TEST_PROVIDER_COPPER_CLEARANCES is for copper only.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6248
2020-11-01 14:12:35 +00:00
7676ba6f5d
Coverity warning.
2020-11-01 14:12:35 +00:00
a9bf4bc6a6
Fix freed-memory crasher.
...
While the DRC_ENGINE is not long-lived, it's test providers are,
and must be cleared for each use.
2020-10-31 15:45:41 +00:00
115fd1d7f3
Move track-to-zone testing to RTrees.
...
Also implemente pad-to-zone testing and removes the control in the
GUI (now that it's fast).
2020-10-31 15:45:41 +00:00
1a1aef756e
Reporting "actual" incompatible with exiting after first hit.
...
But we're currently using this only as a rough collision check
anyway as it doesn't know the specific item-to-item clearance.
2020-10-31 15:45:41 +00:00
788a1e3bce
Handle footprint zones in zone collision checks.
...
Also fixes issue with progress reporter.
2020-10-31 15:45:41 +00:00
cd93dbd324
Naming cleanup.
2020-10-31 15:45:41 +00:00
8d4c9aeaac
Fix Mac-style include.
2020-10-31 15:45:41 +00:00
d5addb692c
Move a bunch of DRC tests to RTrees.
2020-10-31 15:45:41 +00:00
59f3fefd17
When polygonizing arcs don't use synthesized center and angle.
...
Start, mid and end are the "real" properties and come with less
error.
Also collapses two arc polygonization routines into one.
Also fixes DRC checks to be cognizant of arc approximation error.
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-23 23:55:45 +01:00
9ff49277e1
Add implicit rule generation for keepout areas.
...
Also implements collision detection for SHAPE_POLY_SET.
Fixes https://gitlab.com/kicad/code/kicad/issues/6105
2020-10-22 10:41:21 +01:00
4085757aeb
Remove beginning/ending spaces in translations
...
Adding space padding makes translations more difficult by increasing
string counts
2020-10-20 12:08:04 -07:00
18f9f3cf0b
Add curved track support to track-to-zone DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6039
2020-10-20 13:38:09 +01:00
cd1a5ed6fb
Implement progress reporting for DRC RTree.
...
Also fixes a bug in silk-to-mask checking which wasn't checking
zones on the mask layer.
Also a perfomance fix for the DRC RTree to use a hash table (std::map)
instead of a std::set for keeping track of known collisions.
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-13 00:03:58 +01:00
Marek Roszko
Ian McInerney
Jeff Young
Seth Hillbrand