Refactor rescue objects so that they can support derivation.
Factor out legacy rescuer code to perform legacy project rescues.
Create new symbol library table rescuer for rescuing symbol library table
based projects.
Perform the correct rescue type on project load.
Add symbol library table remapping support to the tools menu for run on
demand as applicable.
Add flag to SCH_SCREENS::UpdateSymbolLinks() to allow forcing the symbol
link updates when the library modification hash has not changed.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Change all of the component tree helper objects to use LIB_IDs instead of
LIB_ALIAS pointers. LIB_ALIAS pointers are dangerous to use because they
can be deleted in the symbol library editor while the component chooser
dialog has copies of them. With LIB_IDs, the LIB_ALIAS pointer is found
on demand and can be guaranteed to be valid.
Update the chooser dialog to load the symbol library table instead of the
libraries defined in the project file and return a LIB_ID instead of a
LIB_ALIAS pointer.
Modify SCH_BASE_FRAME::SelectComponentFromLibrary() to handle the LIB_IDs
returned from the component chooser dialog.
Use GetPath() instead of GetFullPath() when initializing environment
variable table entries KICAD_SYMBOL_DIR and KICAD_PTEMPALTE due to
unexpected trailing path separator which was causing find libraries
by URI to fail.
Don't create a project symbol library table when there are no libraries
not found in the global symbol library table.
Don't add non-existent libraries to project symbol library table.
Clear symbol library table when loading a new schematic.
Minor remapping status message improvements.
Remove all instances of PART_LIBS and replace them with SYMBOL_LIB_TABLE
except for the CMP_TREE_MODEL_ADAPTER which requires updating as well.
Return the selected symbol using the LIB_NICKNAME:SYMBOL_NAME format when
viewer is launched as modal.
Add code to SYMBOL_LIB_TABLE object to allow enumerating symbol library
power symbols only.
Add a non-const version of LIB_TABLE::findRow().
Remove redundant information from Doxygen comments.
Check the if the schematic being loaded has been remapped (no symbol
library table nicknames defined) and remap accordingly.
Fix issues when resolving the library symbol links in the schematic
symbols.
Add cache library fallback when resolving symbols that cannot be
remapped.
Add remap complete message to remap dialog.
Add HasLibrary() helper to LIB_TABLE_BASE.
Fix issues when loading library symbols using symbol library table.
Add hashing function to symbol library table.
Improve the symbol panel message to warn user when cache library is
used to resolve symbol.
In LIB_EDIT_FRAME::GetComponentFrom{Undo,Redo}List() methods, the
PICKED_ITEMS_LIST object which was retrieved from undo/redo list has not
been destroyed.
Rewritten SCH_SCREEN::ClearUndoORRedoList() to be easier to read.
Minor whitespace formatting.
KiCad library symbol text objects cannot contain carriage returns and/or
line feeds which isn't the case with Eagle symbol libraries. Otherwise,
the library file will be corrupt when it is saved. Fixing this in the
legacy plugin would break the current file format so just replace them
with underscores. Ideally these text objects should be broken into
multiple text objects but the current plugin design doesn't support
this.
Remove adding the power symbol library when no libraries are specified
in the project file to prevent unexpected missing library dialog.
Only show progress dialog if there are actually libraries to load.
Do not call wxWindow::Destroy(). The dialog is created on the stack and
will be destroyed properly in the wxWindow dtor.
Fixes lp:1728648
https://bugs.launchpad.net/kicad/+bug/1728648
- set a proper title for the dialog
- changed the library parser delimiters to all whitespaces
- sorts the model list in the alphabetical order
- one tab to select subcircuit and semiconductor models
- model type is automatically selected
This instead of using the library alias property. But to not break any
library. When adding new components to the schematic, copy the value
from the library into the Field variable only if the field variable would
otherwise be empty.
This way, the context menu for showing the docs is more understandable
for users, and is also changeable from the schematic without having to
modify the actual libraries.
Fixed: lp:1723104
- Also makes the project and file import functions filetype dependent.
- The change from IO_MGR::KICAD to IO_MGR::KICAD_SEXP removes a conflict from a compile definition for KICAD when compiling kicad/import_project.cpp
- !! Eeschema uses Eagle plugin for loading schematics (i.e. it does not
use KiCad format anymore)
- Fixed build errors
- Fixed a few crashes
- Code formatting
(On windows, xsltproc.exe does not accept '\' in output filename, only '/' like on Unix, so this separator is converted when possible)
Minor code cleanup
This fixes potential DRC false positive bugs that occur when inner layers
are removed from the board but the actual objects on contained on those
layers remain in the board.
Since Pcbnew does not handle odd number layers, this is not a perfect fix.
When the user chooses the front or back layer only options from the layer
setup dialog, objects on the copper layers will not be removed. This will
not cause the false positive issue described above.
Get rid of dialog OK and cancel button event handlers and use the proper
TranferData(To/From)Window for handling control data.
Add PCB_LAYER_COLLECTOR for collecting board objects by layer. Factor out
redundant [] operators into base PCB_COLLECTOR object.
Fixes lp:893950
https://bugs.launchpad.net/kicad/+bug/893950
Don't prompt the user to save the project file after the schematic plot
settings change. It is not done this way anywhere else in KiCad.
Fixes lp:1478131
https://bugs.launchpad.net/kicad/+bug/1478131
Add EDA_DRAW_FRAME::isBusy() method to test if the current item is being
edited or a block operation is in progress.
Ignore undo and redo commands when editor is busy.
Fixes lp:1718656
https://bugs.launchpad.net/kicad/+bug/1718656
Make all trace environment variable strings upper case and prefix with
KICAD_TRACE_ for consistency.
Add Doxygen group for the trace environment variable strings.
Derive the dialog from DIALOG_SHIM and show dialog quasi-modally to prevent
other KiCad main frame window events from being blocked.
Remove redundant storing of parent window pointer.
Verify parent window pointer is actually a SCH_EDIT_FRAME since the dialog
directly accesses parent object methods.
Replace static event table with dynamic event handling.
Fixes lp:1718241
https://bugs.launchpad.net/kicad/+bug/1718241
This fixes a build error on MSVC. The code may actually be legal, but a
proof of that would require a lengthy dissertation on argument promotion
rules for the ternary operator, and the simplest rule of promoting both
cases to a wxString rvalue is not likely to be what is intended here.
Fortunately, this expression can be simplified.
- pad names are stored as wxString instead of a char[4] & integer union
- removed pad name to string conversion functions
- fixed pad & pin properties dialog restrictions regarding the name
length
Test the result of wxFileName::MakeRelativeTo() before testing to see if
the resulting relative path starts with '.'. When a library with relative
path that contains a path name with $ as the first character,
MakeRelativeTo() calls Normalize() which attempts to do an environment
variable substitution that concatenates consecutive paths i.e. the path
/foo/$bar ends up being foo$bar which is obviously incorrect. This fix
is only a fix for absolute paths and files that contain path names that
begin with $. This still does not resolve the issue when adding a
library file relative to one of the search paths that contains a path
name that begins with a $. Fixing this would potentially break paths
that are expecting environment variable substitution.
Fixes lp:1712361
https://bugs.launchpad.net/kicad/+bug/1712361
Use sheet pin direction to calculate sheet minimum height and width.
Remove sheet pin offsetting as the new sheet height and width calculation
prevents invalid minimums.
Calculate the proper minimum height when resizing sheets to prevent resized
sheet height from always increasing.
Prevent the sheet pins from being drawn in the corners of the sheet when
updating the edge constraints on resize. This ensures that the sheet pin
is always drawn within the bounds of the sheet. Please note that this fix
may not be 100% accurate as is assumes the default grid size of 50 mils.
This may not be what the user expected but it guarantees that wires will
connect to the pin properly.
Fixes lp:1699796
https://bugs.launchpad.net/kicad/+bug/1699796
This was the behavior before the factoring out of COMPONENT_TREE. Moving
the history at the top just required inserting it at the right point;
fixing preselect involved wxEVT_INIT_DIALOG not propagating to the
panel. Simple solution was to move the parts of that event handler to
the constructor as they didn't have to be in an event handler anyway.
Fixes: lp:1707538
* https://bugs.launchpad.net/kicad/+bug/1707538
Instead of keeping all items in a boost::ptr_vector(), LIB_ITEMs are now
stored in an integer (KICAD_T) to LIB_ITEMS map.
The map allows to quickly access a subset of items of given type.
As the items are stored per type, there is no need to call
LIB_ITEMS::sort() to assure the correct drawing order. As a result,
libraries load faster.
To retain the old interface, there is a LIB_ITEMS_LIST wrapper for
the map, allowing the developers to access the items as if it was a flat
list-like structure.
Create a new dialog to edit global and project specific symbol library
tables.
Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.
Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.
Fix bug in default environment variables initialization. A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
Create a dialog to give the user options to configure the global symbol
library table the first time Eeschema is run when no global symbol library
table exists.
Add information when dummy symbol is used for library symbols that could
not be found to give the user some useful information to help track down
the broken link rather than display an empty message panel.
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
Due to library list repopulation on refresh, the unit was being
overwritten with 1. Now, we track whether the unit needs to be
overwritten.
Fixes: lp:1677736
* https://bugs.launchpad.net/kicad/+bug/1677736
Wayne Stambaugh
Maciej Suminski
Marvin Schmidt
Tomasz Włostowski
jean-pierre charras
Kristoffer Ödmark
Russell Oliver
Alejandro García Montoro
Ingo Kletti
Seth Hillbrand
Oliver Walters
Simon Richter
Bernhard Stegmaier
Fabrizio Tappero
Jean-Samuel Reynaud
Seth Hillbrand
Chris Pavlina
Dick Hollenbeck