Commit Graph

62 Commits

Author SHA1 Message Date
Roberto Fernandez Bautista 3bf9797620 PNS: add new "EnableRouterDump" kicad_advanced setting 2023-08-07 23:43:54 +02:00
Jeff Young 8c29091001 Add a "hyperzoom" mode for debugging "up close". 2023-06-20 14:19:21 +01:00
Seth Hillbrand a154571438 Add ability to update subgraphs based on changeset
Previously, almost all connectivity updates were full updates, meaning
that the entire connectivity graph would be rebuilt each time a change
was made to the schematic.  This update modifies the update to only
correct the subgraphs that are directly affected by the change.

It uses the existing connection graph to find all affected subgraphs as
well as connections to the changes based on the visible schematic.
These elements are removed from the existing connectivity graph and
marked dirty.  They then have a new connectivity graph built only around
their changes.  The resulting graph is merged into the original.

Currently, this ability is behind an advanced config flag
`IncrementalConnectivity` while testing.

Fixes https://gitlab.com/kicad/code/kicad/issues/10846

Fixes https://gitlab.com/kicad/code/kicad/issues/1794
2023-04-19 16:14:35 -07:00
Seth Hillbrand 2cd854af14 Move Spacemouse to advanced config
The spacemouse driver, particularly on Mac, is extremely unstable and
causes crashes even when not being used.  This places the interface
behind an advanced config flag to ensure that users can affirmatively
opt-in to the potential for crashes
2023-04-07 10:08:43 -07:00
Wayne Stambaugh 12a5c2e037 Put advanced configuration Doxygen comments in their own group. 2023-02-18 12:49:42 -05:00
Seth Hillbrand e6dbca051c Force realtime connectivity on
The pressure relief valve was not useful for common work patterns as it
forced the recalculation on many common actions such as bus expansion.
This caused it to actually feel slower than with the pressure relief
valve off.

For most schematics, realtime is now fast enough to not need the valve
and for those that are extremely complex, removing the valve helps this
run more predictably
2023-01-20 15:17:57 -08:00
Jon Evans 72939e8918 Properties: enable in PCB editor for everyone
Leaving the AC flag around for future use in the footprint editor etc

Fixes https://gitlab.com/kicad/code/kicad/-/issues/2039
2022-12-08 17:38:36 -05:00
Seth Hillbrand 92266635cc Add an advanced config value for the minimum sliver
The hard coded value was too small for certain calculations.  Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
2022-12-03 16:03:43 -08:00
Seth Hillbrand 27add591ec Add Clipper2
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper.  The changes should be
mostly transparent.

Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.

Additionally, the inflation options are slightly different.  We cannot
choose the fallback miter.  The fallback miter is always square.  This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.

Lastly, we currently utilize the 64-bit integer coordinates for
calculations.  This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system.  This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
Jon Evans 3c6e8aea0f Properties panel: post-rebase fixes and hide by default
Remove layer widget re-added by Orson's rebase
2022-08-22 21:32:33 -04:00
jean-pierre charras f20cb0fda8 Activate teardrops: remove advanced config option and add teardrop keywords in files. (the ability to read teardrop keywords was added some time ago) 2022-06-17 19:42:27 +02:00
Mario Luzeiro ef4f0b49fc 3D-Viewer, raytracing: implement bevel edges on item layers 2022-05-25 00:11:46 +00:00
jean-pierre charras 9c29cc945c prepare teardrops, round 2 2022-01-08 16:56:41 +01:00
Wayne Stambaugh cc9d074a2a Add upated UI event throttling to advanced configuration. 2021-12-28 18:17:53 -05:00
Jeff Young 533276e6b6 Copper sliver checking.
ADDED DRCE_COPPER_SLIVER DRC error.
ADDED ADVANCED_CFG DRCSliverWidthTolerance and DRCSliverAngleTolerance.

Fixes https://gitlab.com/kicad/code/kicad/issues/2183
2021-12-23 22:31:05 +00:00
Jon Evans 3cb7ca1db4 Remove manual canvas scale from GTK
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9912
2021-12-09 18:36:44 -05:00
Jon Evans 014bad7b28 Add profile counters for PCB mouse and paint events 2021-12-05 15:16:08 -05:00
Jeff Young 5863bc0937 Put Repair Schematic behind Advanced Config. 2021-11-25 12:56:46 +00:00
Jeff Young e62969d007 Move zone fracture display mode to AdvancedCfg, and add triangulation.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
Jon Evans ae55db77c5 Allow hiding version from manager title bar with advanced config 2021-07-14 18:24:21 -04:00
Marek Roszko 9162013132 Add advanced cfg to force reloading memory cached 3d models 2021-07-11 00:35:38 -04:00
Marek Roszko 7cb0f8f808 Add ADVANCED_CFG to always reload cached 3d models in memory 2021-07-11 00:31:06 -04:00
Marek Roszko 79b90813ec Add ADVANCED_CFG to skip caching 3d models to file 2021-07-11 00:00:06 -04:00
Jon Evans 64d35ecebc Enable dark mode for MacOS 2021-04-28 23:24:19 -04:00
Jonathan Haas 075bd788eb Remove unused OBSTACLE_VISITOR::m_extraClearance 2021-04-23 01:53:09 +00:00
Jon Evans 7dd6a182f2 Unhide the Altium schematic importer
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8069
2021-04-08 22:22:03 -04:00
Roberto Fernandez Bautista 235688e459 Less restrictive Arc Track Dragging tool
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.

Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
Wayne Stambaugh 6d2f80b4cf Pcbnew: add write board netlist to file support.
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.

Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
Jon Evans 405fa183b2 Add icon theme selection behind advanced config flag 2021-03-11 08:37:35 -05:00
Jeff Young 86aaa2e9cb Rationalize footprint bounding boxes and cache all of them.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 13:50:27 +00:00
Jon Evans 92cc88f87c Tighten up schematic label bounding boxes
Margins were being added in more places than necessary

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7689
2021-02-24 17:15:35 -05:00
Jon Evans 7b64389062 Add a helper to generate action documentation 2021-02-20 13:41:49 -05:00
Zoltan Gyarmati 5676117d0b Make small drill marks size configurable via advanced config for both printing and plotting
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
Jeff Young a207bd97bb Naming conventions. 2020-11-17 16:05:49 +00:00
Jeff Young 69c1171320 Add PDFWriter debug mode (ie: uncompressed output).
Fixes https://gitlab.com/kicad/code/kicad/issues/5593
2020-11-06 10:56:45 +00:00
Marek Roszko 9e115a548e Add advance config variable to skip bounding box loading on footprints 2020-10-03 22:01:42 +00:00
Jeff Young 7d3eee8cf9 Move DebugZoneFiller to advanced config.
This will hopefully keep it from accidentally getting checked in
again.
2020-09-23 10:52:44 +01:00
Jeff Young f347118ce3 Add a min pin width advanced config for plotting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5546
2020-09-08 20:19:54 +01:00
Jeff Young d1006138fd ADDED holeWallPlatingThickness to AdvancedCfg.
Used for zone filling and DRC hole collision testing.  Allows us to
calculate the actual hole size from the finish hole size.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
Jeff Young 38e9217d54 Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
Thomas Pointhuber a03fb7a9a8 Altium: Refactor and add initial structure for schematic importer
altium: move pcbnew/altium2kicadpcb_plugin -> pcbnew/plugins/altium

See: https://gitlab.com/kicad/code/kicad/-/issues/4412
2020-08-23 19:01:08 +00:00
Seth Hillbrand ab58b67842 Adding triangulation viewing to AC
This adds a helper routine to visualize the quality of our
triangulation.  It also renames an excessively long variable name for
the arc editor
2020-08-12 06:22:45 -07:00
Fabien Corona 133d082cc5 Pcbnew fix arc edition 2020-08-09 23:03:31 +00:00
Seth Hillbrand 0a4ce183a4 ADDED: polygon newlines every point
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.

Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
2020-07-30 01:18:44 +00:00
Seth Hillbrand 6900f04ee0 Change Zone extra clearance magic number to AC
Rather than keeping a magic number in the code, we set the default in
the advanced config setting and allow users/developers to modify it.
2020-07-26 07:20:24 -07:00
jean-pierre charras c254b331f3 Pcbnew: Activate pad fabrication property in pad properties dialog.
It was previously an option of advanced config since 6 months.
It is now not optional.
2020-07-23 14:33:24 +02:00
Jon Evans 3d7610d6b9 Hide PNS debug graphics behind an AC key
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4061
2020-07-03 19:33:36 -04:00
jean-pierre charras 161b73e55b Enable storing pin function (pin name) in pads.
This is useful in board routing.
It is plotted in pad attribute TO.P in Gerber files.
2020-04-02 20:14:45 +02:00
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
Jeff Young 7bb9551801 Handle boost exceptions. (From Coverity scan.) 2020-01-11 00:04:01 +00:00