*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()
*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.
*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
See top of dialog_shim.cpp about that for benefits and need.
*) You can now pick footprint from the schematic component field dialog, although
if you do this before you open the BOARD, you will only get the global footprint
libraries, not also the project specific ones. Opening the BOARD first avoids this
problem.
This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.
A fix for this will be coming in a few days.
However it mostly starts to show why the KIWAY is terribly useful and important.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
SVG plot, fix a missing reinitialization in plot lines, which could define a filled polyline, instead of a simple polyline
(these fixes solve Bug #1313084 )
*) void KIWAY::ExpressMail( FRAME_T aDestination, MAIL_T aCommand, const std::string& aPayload, wxWindow* aSource=NULL );
*) virtual void KiwayMailIn( KIWAY_EXPRESS& aEvent );
*) enum MAIL_T expansion into the brave new world if cross KIWAY_PLAYER communications.
Let the KIWAY_PLAYING begin.....
through well conceived mail from one KIWAY_PLAYER to another.
Get thinking now. Add a new MAIL_T value, then send ExpressMail(),
and receive it in KiwayMailIn(), it's that easy.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
* getpart.cpp: fix a potential bug on a translatable string with has requirements in spelling.
* fix bug #1066179
* kicad: fix erroneous labels in sub menus.
* Pressing 'Enter' while the focus is in the tree did not work due to the
double-click wxWidgets workaround. Make it work.
* More clearly document what is happening and how it can be tested.
* Fix string concatenation for _( "Unit" ) + wxT( " " ). This failed
compiling against wxWidgets 2.8 (thanks Cirilo Bernardo ).
* Base the indentation on a measured observation with explanation
(98%-ile of name-length found in library). The previously chosen 24
character indentation was too wide for most.
* Don't use a #define spilling into the global namespace, but use
a locally defined constant for COLUMN_DESCR_POS.
* Manually change fbp file minor version number so dialog could be edited
with latest release version of wxFormBuilder.
* Give component view panel more weight for improved component view size.
* Add padding around dialog button sizer.
* Improve component chooser redraw to fit in wxWidgets redraw strategies.
* Use LIB_COMPONENT::Draw and LIB_COMPONENT::GetBoundingBox for drawing the
component
* Make resize redrawing work properly.
* Allow to select units in components that have more than one right in the
component chooser dialog.
* Keep chosen unit in history.
* Show preview of current component unit as thumbnail image next to the
description box.
* Fixes lp:1280567
* make some more fields 'const' that can.
* Instead of previous/next _visible_ element, Go through
previous and next element. Otherwise the cursor stops moving
if the item is only partially visible.
Add a workaround to fix a new bug in wxWidgets 3.0 ( Windows specific ) which shows icons only with a size = 16x16 in menus which have attribute wxITEM_CHECK
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame.
The desire is to migrate designs *away from* case independence, and to create
designs which use literally (case specific) interpreted component names. But for
backwards compatibility, you may turn OFF this option if you really must.
(Remember that with KiCad using text data files, typically you would be better
off simply doctoring those files into a case literal state with a text editor
and move forward into the brave new world of case specificity. Also, BOM
generators may not work properly when you have this option turned OFF, the xml
export's referential integrity is broken on library part name. Hence the default
is ON now, as of 29-Jan-2014.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
* Replace all occurrences of the word "part" with "unit" when referring to
multiple unit components for improved consistency.
* Replace "shared by" with "common to" when referring to objects (lines, arcs,
pins, etc.) that are common to all units.
* Improve wording in library component properties dialog.
Eagle plugin: filter and replace not allowed chars in FPID(-':' and '/') by _ or -, if they are used in Eagle footprint names (otherwise, boards converted and saved under kicad_pcb format are not readable by Pcbnew).
* Fix replace bug to handle case sensitivity properly.
* Fix replace bug where the item index was getting updated incorrectly.
* Fix replace infinite loop bug on replace all.
* Make find/replace view update code a separate function.
* Rearrange find/replace trace string to add tracing to EDA_ITEM::Replace().
* Add IsComplexHierarchy method to SCH_SHEET_LIST for future find/replace
improvements.
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
* Merge HandleBlockEnd() and HandleBlockEndByPopUp() into as single block
end function HandleBlockEnd().
* Replace all instances of HandleBlockEndByPopUp() with HandleBlockEnd().
* Change block hot keys to send command events instead of directly calling
end block handler.
Remove KICAD_GOST option because it is now useless: the 2 GOST options are now selectable at run time and are:
* specific page layouts (now user definable, and the GOST page layouts are available in template folder)
* notation for multiple parts per package (made in eeschema, preference menu)
Enhancement in Excellon file reader: accept Feed Rate and Spindle Speed definitions in Tool information line (but does not use them)
Eeschema: better name for m_SheetList (changed to m_SheetPath) member of class NETLIST_OBJECT.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
Pcbnew: better test for allowed layers when creating/editing Dimensions and some other Graphic items
Drc: fix comments and messages for some drc tests.
To do: fix issues in active layer selection when creating a track and layer pair selection dialog
* Use a regular expression to enforce more stringent bus label testing.
* Add validator to edit label dialog to prevent space character from being
used in labels.
dialogs which allow editing of component properties. The button
is active when the table row cursor is on the DATASHEET field only.
When active, and your datasheet is a URI, then your default
browser will be launced to show that datasheet if it can find it.
This incentivizes use of http:// links for datasheets.
was simply a pointer to an object on the display list. At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a
crash. This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Force search when wrap past end of list option changes state.
* Fix SCH_FIELD::Matches() for bug in user defined fields which have an ID
of -1.
* Minor improvements to the find data names to improve source code readability.
sometimes, the modified flag was set for these components just when switching from a sheet to an other sheet.
Pcbnew: fix Bug #1197414 (dragged track segments does not show clearance area)
When KISYSMOD is not defined , in GetAllFiles, skip hidden directories
Gerbview: fix a collision name for GetLayout method.
Eeschema: fix potential crash when editing a pin electrical type (The user was able to enter a non existing type)
Remove dead code relative to old BOM generation.
Rename witha more explicit name bom-example?.py , fix some issues and move them from script/bom-in-python/ky to script/bom-in-python
Rename ki.py utility to more explicit ky_generic_netlist_reader.py
and various DIALOG classes called from top frames. See comments in
{eeschema,pcbnew}/invoke_a_dialog.h.
*) Move some dialog classes into *.cpp files from *.h files.
*) void SCH_EDIT_FRAME::OnErc( wxCommandEvent& event ) was opening the modeless
ERC dialog more than once if icon was clicked more than once.
*) Remove BOM stuff.
Eeschema, dialog netlist: fix a bug when removing a plugin panel, when is is not the last.
dialog netlist:Add a predefined command string for python scripts, when creating a new netlist plugin entry.
because under Linux and wxWidgets 2.9, wxStaticBoxSizer are very ugly (text not readable in this dialog)
(Does not happen with wxWidgets 2.8)
Eeschema hotkeys: remove duplicate keys in key editor.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO::
ReadFootprintFiles() which I created in bug fix lp:593989.
* Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD
environment variable is defined as an empty string.
* Add error dialog when libraries cannot be found in system search path
when loading footprint using the select footprint dialog.
* Add footprint library name column to the EDA_LIST_DIALOG when selecting
footprints from the list.
* Allow reading all columns from the selected row in EDA_LIST_DIALOG.
* Remove redundant sort from EDA_LIST_DIALOG constructor
* Add library name member variable and accessors to FOOTPRINT_INFO.
* Make headers translatable for Eeschema select component from list dialog.
* Add some helper methods to FPID for identifying the FPID type and validity.
* Remove a bunch of trailing whitespace and add missing license comments.
(explanation: float is implicitly promoted to double anyway, it's only useful
for storage; also a fp variable forces conversion of other int in the expression
without needing a cast)
Typo fixes in some comments 'floatting' -> 'floating' :D
The plan goes like this:
- eeschema still uses int in decidegrees
- all the other things internally use double in decidegrees (or radians
in temporaries)
- in pcbnew UI the unit is *still* int in decidegrees
The idea is to have better precision everywhere while keeping the user with int i
angles. Hopefully, if a fractional angle doesn't come in from the outside, everything
should *look* like an integer angle (unless I forgot something and it broke)
When the time comes, simply updating the UI for allowing doubles from the user should
be enough to get arbitrary angles in pcbnew.
- Removed spurious int casts (these are truncated anyway and will break
doubles)
- Applied the Distance, GetLineLength, EuclideanNorm, DEG2RAD, RAD2DEG
ArcTangente and NORMALIZE* functions where possible
- ArcTangente now returns double and handles the 0,0 case like atan2, so
it's no longer necessary to check for it before calling
- Small functions in trigo moved as inline
In most case the assignment to null was not necessary since it was easily provable that the (local) variable wouldn't have referenced after that anyway.
* Tweak the NETLIST_READER code to allow for component footprint names that
are not found in any library to generate a warning instead of an error and
update the board accordingly.
* Don't display undo warning in netlist dialog when dry run option selected.
* Rename netlist_reader_common.cpp to netlist_reader.cpp
* Rename netlist_reader_firstformat.cpp to legacy_netlist_reader.cpp
* Rename netlist_reader_kicad.cpp to kicad_netlist_reader.cpp
* Remove cvpcb/read_write_cmpfile.cpp and move the single function it
contained into cvframe.cpp
* Remove cvpcb/loadcmp.cpp and move the single function it contained into
class_DisplayFootprintsFrame.cpp.
* Remove cvpcb/readschematicnetlist.cpp and move the single function it
contained into cvframe.cpp.
* Remove cvpcb/setvisu.cpp and move the few functions it contained into
the appropriate source file.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
a CSV file for Libre Office or Open Office. It is very easy to use. You can specify it as a plugin for
Eeshema netlist generator.
It searches for all field names, generates the table headings accounting for all fields found in any part.
Then stuffs all the parts rows according to proper fields.
Depending on build options seems that wx uses different types for size() so the Format string was not always correct. Put a fat warning in a comment too.
the spurious warning about stuff that couldn't be seen when changing
colours.
NOTE that the 'net name' layer is present and configurable but non used
anywhere!
Pcbnew, layer manager: add option (popup menu) to always keep copper layers not visible but the active layer, even when the active layer is changed.
Usefull for multilayer ( more than 4 layers) PCBs.
In particular the new mechanism for handling extended color palettes is in place,
included renaming the ini keys and saving the color name instead of its index; this means better forward compatibility with palette changes.
Since ini keys are changed, colors will be reset
* Complete encapsulation of the MODULE class.
* Complete encapsulation of the EDA_TEXT class.
* Encapsulate most of the ZONE_CONTAINER class.
* Add pcbcommon library as a dependency for reSWIGging the scripting
support. This should cover most dependency cases.
* Make Pcbnew net list dialog honor escape key on Linux.
* Make Pcbnew swap layers dialog honor escape key on Linux.
* Layout and UI policy fixes for Pcbnew swap layer and net list dialogs.
* Layout and UI policy fixes for Eeschema plot dialog.
* Rename fpip.h to fpid.h.
* Fix FPID class compiler errors.
* Restore fpid.cpp to Pcbnew static library source list.
the crosshair after zooming.
This method is only used when the ALT key is held while using the mousewheel or
if it's permanently enabled in the options dialog next to the middle mouse
button panning option.
* Improve the stable and testing build version option logic.
* Use CMake FindPythonInterp to configure the Python interpreter.
* Use Python interpreter to determine the system Python module install
path if not already defined on the command line.
* Add header symbol checks for asinh(), acosh(), and atanh().
* Add test source to check for isinf() which can be defined as a C++template.
* Replace conditional compile on windows systems for aXXXh() with CMake
configuration tests.
* A few minor MSVC compile fixes.
* Fix incorrect python environment string in fixswigimports.py
* Create a separate document for KiCad CMake build options.
* Create a separate how to compile KiCad on Windows document.
Pcbnew: in netlist dialog: The user now can choose between the netlist and the .cmp file to import footprints names.
Therfore no need to delete the .cmp file when exists to use only the netlist.
This is useful for users who use CvPcb only once to fill footprints fields in schematic, and after edit/modify the footprints fields in schematic outside CvPcb.
Dick Hollenbeck
Lorenzo Marcantonio
jean-pierre charras
Maciej Suminski
Marco Serantoni
Brian Sidebotham
Fabrizio Tappero
HennerZeller
Wayne Stambaugh
Cirilo Bernardo
maciej.
Povilas Kanapickas
Andrey Fedorushkov
Thiadmer Riemersma
Alexander Lunev
Stefan Helmert
Marco Mattila
Carl Poirier
Baranoviskiy Konstantin
Emmeran
Antia Puentes
Jacobo Aragunde Perez