f8875bc5a6
Move std::contains to alg::contains.
2020-09-26 14:42:40 +01:00
d7e80f8008
Add std::contains() to simplify a lot of code.
2020-09-26 12:40:32 +01:00
bba29a1036
Always show the track and via menu in the router context menu
2020-09-25 00:17:54 +01:00
672756a018
Move the router tools to a TOOL_MENU context menu
...
The previous way of displaying a context menu was being
usurped by the selection tool because it was displaying its
menu before DispatchContextMenu was called, and all other tools
explictly use the TOOL_MENU system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5762
2020-09-24 23:51:34 +01:00
18e17abd6a
Rename "Keepout" to "Rule Area"
...
These objects can now be used in advanced DRC rules and
not just for keeping things out. Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
ece2ae9805
Don't capture commands in the router eventloop that it doesn't process.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
2020-09-19 12:08:18 +01:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
173b4ff588
Add snapping to eeschema
...
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
2020-09-09 10:18:15 -07:00
54ca66be72
router: NODE::AllItemsInNet() can now filter by item type
2020-09-08 01:31:42 +02:00
f2338d9faa
router: fix segfault with NPTH holes in COMPONENT_DRAGGER
2020-09-08 01:31:42 +02:00
88635ee5b6
Clean up error messages.
...
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
2020-08-31 14:19:57 +01:00
7a5c99ee0f
Tweak the mouse-based posture solver
...
Add an epsilon to reduce flutter
Add a lock after a certain distance
Forget the old trail when unlocking
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5381
2020-08-30 19:54:09 -04:00
8b7c0cbe04
Adjust footprint zones while dragging footprint.
2020-08-28 11:05:58 +01:00
f4e8c194be
Revise restriction on No Copper setting
...
This allows the user to specify a NPTH with "No Copper", allowing a pad
to retain the mask layer without a copper landing.
Fixes https://gitlab.com/kicad/code/kicad/issues/3407
Fixes https://gitlab.com/kicad/code/kicad/issues/5237
2020-08-26 18:09:06 +00:00
adff7f749b
PNS: Addition layer smarts
...
Edge.Cuts have no parent but cross all layers, so we need to handle the
"all layers" case. Also renames "IsPadOnLayer" to "IsOnLayer".
Fixes https://gitlab.com/kicad/code/kicad/issues/5351
2020-08-25 09:42:50 -07:00
686af65a9b
Fix issue generating alternate shape
...
Boolean ops need boolean inputs.
2020-08-22 08:04:03 -07:00
842641308f
Solids don't always have nets (even a defualt one).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5290
2020-08-21 20:08:12 +01:00
9a4f92dfd9
Ensure that all pads with holes have alts
...
Alternate shapes for holes that are fallback clearance are needed in
case we have missing copper on any layer
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-20 21:50:37 -07:00
dd9f7c8c25
PNS: Add defensive coding to AlternateShape()
...
Adds additional check/warnings about missing alternate shapes when they
are expected.
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-19 09:02:06 -07:00
ede39780e2
Remove all debugging output that cannot be disabled.
...
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
2020-08-18 10:17:36 -04:00
4cc820f550
PNS: skip hulls for layers where the solid isn't
...
If we don't have an object on the required layer and there isn't a
through-hole (m_alternateShape), then we shouldn't return a hull
Fixes https://gitlab.com/kicad/code/kicad/issues/5233
2020-08-18 06:53:03 -07:00
5c3a1d059e
Fix memory mgmt issue with SOLID shapes
...
We don't delete items from the CTOR but we do need to check if they
exist in the incoming SOLID before cloning
Fixes https://gitlab.com/kicad/code/kicad/issues/5214
2020-08-17 06:16:11 -07:00
afc94fdec3
PNS: Be better about handling multiple layers
...
Rather than adding pads/vias multiple times for each layer, we introduce
the "alternate shape" idiom to PNS that allows us to optionally place
the collision constraint on the hole instead of the pad for those
vias/pads that have inner layers removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5158
Fixes https://gitlab.com/kicad/code/kicad/issues/5198
Fixes https://gitlab.com/kicad/code/kicad/issues/5195
2020-08-16 12:39:15 -07:00
57c3d8e8d8
Make sure preview group gets added to view after a clear.
2020-08-15 21:13:44 +01:00
bd14f8a82a
ADDED: New appearance control widget for PcbNew
...
Featuring:
- Layer view presets
- Per-type opacity for tracks, vias, pads, zones
- Net and netclass color and visibility controls
CHANGED: Simplified object visibilty controls
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1951
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2003
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2254
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4325
2020-08-15 15:24:28 -04:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
9a66a5acad
Cleanup code line endings
2020-08-10 03:27:27 +00:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
90a17427ee
Give the length tuning tool an inital end point that isn't the start point
...
Using the starting point as the end point means that the tool
initializes with 0 length traces and so nothing is visible.
Fixes https://gitlab.com/kicad/code/kicad/issues/1912
2020-08-08 23:41:48 +01:00
7cd8f710b6
Clean up unused includes.
2020-08-08 16:25:30 +01:00
c57c168753
PNS: Remove items from all layers
...
subIndices control which layers the items are inserted onto and removed
from. The iterator to remove items needs to be inclusive of the
first/last layers
Fixes https://gitlab.com/kicad/code/kicad/issues/5090
Fixes https://gitlab.com/kicad/code/kicad/issues/5075
Fixes https://gitlab.com/kicad/code/kicad/issues/5034
2020-08-05 19:39:55 -07:00
73832a9708
Work around an event processing failure.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4273
2020-08-05 19:36:58 +01:00
e2ec9d9f00
A more fail-safe way to disallow editing while routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4413
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-05 16:51:58 +01:00
59ba793096
Disable various combinations of router and editing commands.
...
They just confuse each other.
Fixes https://gitlab.com/kicad/code/kicad/issues/5067
2020-08-04 14:32:02 +01:00
74b9cce682
Try again at dragging module edges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
2020-08-03 23:53:45 +01:00
ef2388b5bb
Fix issue with dragging flipped MODULE.
2020-08-02 17:05:13 +01:00
d586495c0a
Preview fp edges & text while dragging in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
2020-08-01 15:40:34 +01:00
89a953e039
Migrated GetEffectiveShape(s) to SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
85aecc15ee
router: fix mistake in 45/free-angle mode selection when dragging corners
2020-07-29 23:14:03 +02:00
c2b9db293f
router: prevent heap crash when initial walkaround line is empty
2020-07-29 23:14:03 +02:00
1f5fb979b9
Keep PNS item RTree on layer-by-layer
...
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis. This also allows for layer expansion by using
deque of RTrees rather than fixed index
This fixes the missing layernumbers and keeps the layers in a deque to
prevent re-allocation on expansion.
Replaces ad94b6205
2020-07-29 11:21:00 -07:00
f00c59c446
Fix a few Coverity warnings.
2020-07-29 09:26:57 +02:00
ad94b6205a
Revert "Keep PNS item RTree on layer-by-layer"
...
This reverts commit a34d33c460
2020-07-28 21:20:19 -07:00
a34d33c460
Keep PNS item RTree on layer-by-layer
...
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis. This also allows for layer expansion by using
vector of RTrees rather than fixed index
2020-07-28 10:17:56 -07:00
46602148dc
Fix overly aggressive assert.
2020-07-28 13:35:37 +01:00
4153309fba
Add defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4941
2020-07-25 23:54:04 +01:00
bf445c1a95
Performance enhancements.
...
1) cache pad polygon outlines
huge improvement in connectivity performance and a decent
improvement in DRC performance
2) don't pre-allocate CONTEXT stack
significant improvement in DRC rule performance
2) don't keep re-encoding strings
decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
70b98c3b49
router: dump entire event log + annotated PCB upon user request
2020-07-22 18:05:54 +02:00
379aa8f3b5
router: clearer distinction between LOGGER and DEBUG_DECORATOR classes.
...
The first one keeps a log of events (start routing, mouse motion, etc).
The second allows for adding temporary debug drawings and messages which are stored synchronously with the events in LOGGER.
The event stream together with the PCB design (now with UUIDs) can be used to deterministically replay routing bugs as the user sees them.
2020-07-22 18:05:54 +02:00
2a2e389a94
router: auto-guess track posture from mouse movements, experimental!
2020-07-22 18:05:50 +02:00
Jeff Young
Ian McInerney
Jon Evans
Seth Hillbrand
Tomasz Wlostowski
Wayne Stambaugh
jean-pierre charras