6e6a748320
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
(cherry picked from commit 126914859a
2022-12-12 01:58:13 +00:00
8af64fb326
Do not allow dimensions in the footprint editor
...
The object type doesn't exist in 6.0
Fixes https://gitlab.com/kicad/code/kicad/issues/12841
2022-11-30 11:04:15 -08:00
be86e9f57f
Prevent UI events during footprint dialog ctor
...
Errors may get thrown when the 3d models are loaded for missing search
paths. This triggers the idle event that makes assumptions about the
state of the dialog. We halt event handling until the ctor finishes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12944
2022-11-29 19:38:48 -08:00
ec92def539
Add support for unitless values to PCB_EXPR_EVALUATOR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13016
(cherry picked from commit 8260f0ee13
2022-11-29 23:28:37 +00:00
d7a7ddd80e
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
(cherry picked from commit cefc5268ab
2022-11-29 23:15:39 +00:00
2f47857abc
Move zone borders back to their "host" layer.
...
Zone borders shouldn't be affected by zone-opacity control; we always
draw them in full layer opacity.
Fixes https://gitlab.com/kicad/code/kicad/issues/12438
(cherry picked from commit 25f06eed8c
2022-11-29 23:05:50 +00:00
a09a3dfe68
Be careful of interveneing priority zones when doing divot prevention.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
(cherry picked from commit 1f4e51b008
2022-11-29 22:43:41 +00:00
e083cbaf50
Allow a single net collision with a free pad.
...
(cherry picked from commit 3534cfbba8
2022-11-29 22:16:15 +00:00
9d401b00d8
Allow groups in groups
...
This was allowed in the qa test, so we allow it going forward
(cherry picked from commit 137b4de1c2
2022-11-28 11:28:51 -08:00
c9cc29593a
Don't add non-groupable items to groups
...
This is a re-implementation of 259e41behttps://gitlab.com/kicad/code/kicad/issues/13026
2022-11-28 09:26:48 -08:00
42bd43407a
Remove clone's group info
2022-11-28 09:17:17 -08:00
cca7f1dbda
router: use actual snap point position for routability checks of a segment instead of the segment endpoint(s).
...
Explanation:
- place a long segment A with something violating the rules close to its endpoint
- try to start routing in the 2/3 of the length of A (on the obstacle side)
- bummer - the router picks the nearest endpoint of A for the collision check (even though we don't care about this collision since we want to route far away from it)
(cherry picked from commit e558893851
2022-11-23 06:57:11 -08:00
2cf4cb937f
Fix graphic snapping
...
If the user has requested the ability to snap to graphics, we want to
add any of the graphical layers to the limit list
2022-11-23 06:57:11 -08:00
f136f3d7ee
pcbnew, SVG import: fix an issue for SVG files using a CR+LF end of file
...
The issue was in a validity test working only if CR+LF is not replaced by LF
Fixes #10096
https://gitlab.com/kicad/code/kicad/issues/10096
2022-11-09 09:36:06 +01:00
61d4a5bfbe
Resolve embedded text vars
...
Title Block text variables are embedded into the pcb file and should
be used for resolving when the project file is missing
(cherry picked from commit d1bf889e71
2022-11-03 10:26:06 -07:00
6289a82a18
PCB Router: return to original active layer after routing
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12313
(cherry picked from commit fa3e9efdce
2022-11-03 10:16:26 -07:00
882756b676
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12753
(cherry picked from commit c026c3af7b
2022-10-25 17:40:33 +00:00
8c3cd200d1
Clean up layer handling and normalize to remove magic numbers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12747
(cherry picked from commit 5fe5534822
2022-10-25 14:21:03 +01:00
2d2912c23d
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
2022-10-24 18:46:15 -04:00
3106f6c9f4
We must check clearance on all layers of multi-layer items.
...
(One layer may have a custom rule.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12733
(cherry picked from commit 2dec37f806
2022-10-24 10:57:07 +01:00
fde2b429b9
Make sure pair caches are layer-specific where they need to be.
...
(cherry picked from commit 909358e643
2022-10-24 10:57:07 +01:00
8e331628b6
Do not add a title/comment in mandatory field strings when writting netlists.
...
This is mainly for "Sheetfile" property because current it is the only one
that has a title when plotting/drawing it.
2022-10-22 15:38:26 +02:00
02d38db577
Fix about fix_swig_imports.py, useless or not working with swig 4, but needed by swig 3
...
fix_swig_imports.py cleans pcbnew.py, but the section to clean does not exist
in swig 4, only in swig 3.
2022-10-21 16:33:01 +02:00
6de30b19a0
Don't sync the world twice in inline router tools.
...
Activate() already clears and syncs the world via PNS::TOOL_BASE::Reset,
so there's no need to sync in InlineDrag and InlineBreakTrack.
(cherry picked from commit cc4e34ef49
2022-10-21 17:21:24 +03:00
152252c685
Fix selecting pads of footprints in groups.
...
(cherry picked from commit 67985510a8
2022-10-21 17:19:05 +03:00
3b0466f3e8
Fix selection and entering in nested groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12586
(cherry picked from commit 0fea6f5ac3
2022-10-21 17:18:07 +03:00
2ca7a76693
Don't connect disparate nets
...
Only some elements get their nets assigned based on connectivity. Other
elements should be keps in different clusters for connection
Fixes https://gitlab.com/kicad/code/kicad/issues/12622
(cherry picked from commit c9f11827a7
2022-10-21 11:35:31 +01:00
549dca1a05
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
(cherry picked from commit 585fac19c6
2022-10-21 11:12:02 +01:00
da520f83ee
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
(cherry picked from commit 6fd195c389
2022-10-21 11:11:02 +01:00
47547713de
Broaden reset-sizes-after-layer-switch algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
(cherry picked from commit 40ad5b6de3
2022-10-21 11:09:47 +01:00
705570923e
Fix some outdated things (mainly about fix_swig_imports.py, useless with swig version 4)
...
From Master, commit 397a9302Fixes #12414
2022-10-20 17:12:57 +02:00
2827835720
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
From Master branch
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:47:04 +02:00
bf95906f90
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
(cherry picked from commit 413fd82813
2022-10-19 18:24:33 +01:00
e8d2c222b6
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
(cherry picked from commit 46752499df
2022-10-19 18:22:32 +01:00
f891c4641b
We were saving the old board pointer, but not updating the current one.
...
This also makes a few other adjustments to order and to where we look
for the enabled layers which should make it more robust.
Fixes https://gitlab.com/kicad/code/kicad/issues/10925
(cherry picked from commit 631980b0ab
2022-10-19 18:17:40 +01:00
a65fc7f82a
Pin 0-sized pads at 1um rather than throwing them out.
...
(See bug report for more commentary.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12617
(cherry picked from commit 46a41e2e34
2022-10-19 18:15:49 +01:00
5bcd0a5828
Update router sizes when switching layers.
...
We may have layer-specific rules involved. Note that at some point
we also need to do something similar on every "fix route" step to
handle area-specific rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
(cherry picked from commit d8a3ba7917
2022-10-19 14:47:08 +01:00
74d8040e8c
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
(cherry picked from commit 08260661b8
2022-10-19 14:43:13 +01:00
c5514d43c7
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
(cherry picked from commit 8b9cbd5805
2022-10-19 14:42:16 +01:00
0704e37eb5
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
(cherry picked from commit 1566bd8b14
2022-10-19 14:41:30 +01:00
c94de31a8c
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
(cherry picked from commit 436d75e7f9
2022-10-19 14:40:07 +01:00
2793e67bab
Bring adding-to-group and hiding in sync.
...
(cherry picked from commit 6a6ef9b1f4
2022-10-19 14:39:45 +01:00
3213ea582d
Avoid trying to draw empty pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
(cherry picked from commit e866dfe137
2022-10-19 14:38:40 +01:00
6003097411
Areas might have layers defined in area as well as rule.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12584
(cherry picked from commit 51c20da93e
2022-10-19 14:34:22 +01:00
6390633a7b
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
(cherry picked from commit cbb997a3b5
2022-10-19 14:28:06 +01:00
dde5f2bed1
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
(cherry picked from commit 9119b5072a
2022-10-19 14:26:19 +01:00
914e396e2e
Implement annular ring checking for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12109
(cherry picked from commit 9a4136de00
2022-10-19 13:49:40 +01:00
f6bdd40c30
Manual cherry-pick of ba630971af.
2022-10-19 13:31:16 +01:00
da85a5f6bf
Work around more instances of the wxWidgets color string locale bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12552
(cherry picked from commit c0a666507c
2022-10-19 12:56:17 +01:00
61cfe53be1
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
(cherry picked from commit 697056fa7e
2022-10-14 16:15:51 -07:00
Alex
Seth Hillbrand
Jeff Young
Tomasz Wlostowski
jean-pierre charras
Mike Williams
Jon Evans