The dialog allows a color selection for each dielectric layer.
However for a "dielectric" defined by more than one layer, the color was handled
only for the first layer, and not for the other sub-layers.
The implementation used to always check F_Cu and B_Cu, rather than
where the via started and ended (which will be different for blind/
buried vias and microvias).
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
Apparently mapping Eagle footprint layers to the KiCad Dwg_User
that were previously mapped to UNDEFINED_LAYER breaks the QA test
and causes the footprint editor to crash when opening Eagle
footprints. This means that the potential data loss issue when
loading Eagle footprints is still in play.
The Eagle plugin layers have to be mapped differently depending on
whether a board is being imported or a footprint library is being
cached. Footprint libraries can bypass the manual layer remapping
step that happens when importing a board.
Please note that when loading footprints in the footprint editor
and viewer, all layers that do not directly map to KiCad layers are
put on the Dwg_User layer so that there is data loss. Users will
have to manually remap objects to the correct layer as required.
This is less than ideal but until the footprint library table parser
supports prompting users to remap unknown layers, it will have to do.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11839
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
Pads with zero width or height cause issues when rendering and
selecting. KiCad has never allowed these elements but hasn't prevented
importing systems where they exist. This prevents their import and
cleans existing designs where the pads are placed
Fixes https://gitlab.com/kicad/code/kicad/issues/12200
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
Better fix for 11750. Instead of figeting with layer values, we sort
our map based on the layer numbers in the PCAD file. F_Cu is always
layer 1 and B_Cu is always layer 2.
Fixes https://gitlab.com/kicad/code/kicad/issues/11750
According to the PCAD specification, all tags are case insensitive.
Most exporters honor the defaults but there is always an outlier or two
Fixes https://gitlab.com/kicad/code/kicad/issues/11652
the new attribute is:
"(attr (teardrop type padvia)))" or "(attr (teardrop (type track_end)))"
However (Work in Progress) writing this attribute in file is temporarily disabled.
1) Import leaders
2) Drop radius and angle dimensions
3) Import dimension text sizes
4) Correctly interpret which side dimension offset is on
5) Correclty handle offsets for non-cardinal dimensions
Fixes https://gitlab.com/kicad/code/kicad/issues/10763
Also fixes two bugs:
1) subsequent text items that are marked >NAME or >VALUE will now get
imported as text items with ${REFERENCE} or ${VALUE} (instead of overwriting
the previous text item)
2) we no longer (accidentally) capitalize all text items.
Fixes https://gitlab.com/kicad/code/kicad/issues/11321
When importing a eagle board file using wxXmlDocument, the strings in eagle BOARD
(UTF8 encoded) are correctly converted to wxString (using unicode wide chars)
So trying to reconvert these strings using FROM_UTF8( <wxString>.c_str() )
is incorrect and can break initial string if non ASCII7 chars are found
ADDED: Any addition board layers can be plotted on all selected board layer
when plotting.
CHANGED: The new plot to all layers feature made the plot edge cuts option
obsolete. Users must now select the edge cuts layer from the list of
plot to all layer selections to include edge cuts on all layers when
plotting.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2449
Bugs found but not fixed yet:
* Reference and Value are not converted correctly yet
* HOTFIX: test commented out
* GP3906-TLP and UBLOX_ZOE_M8-0-10 are not able to import the description again
* HOTFIX: description removed from gold file
Seth Hillbrand
Dag Lem
Jeff Young
Jon Evans
lukas-heiligenbrunner
Marek Roszko
jean-pierre charras
Roberto Fernandez Bautista
Wayne Stambaugh
Mike Williams
luz paz
Thomas Pointhuber