The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
Jon Evans
Roberto Fernandez Bautista
Jeff Young
jean-pierre charras
luz paz
Marek Roszko
Seth Hillbrand
Tomasz Wlostowski
Ian McInerney
david-beinder
Jonathan Haas
Thomas Pointhuber
Wayne Stambaugh