bd0fbea044
Handle 360° arcs on import as circles
...
KiCad breaks a bit when dealing with 360° arcs, so convert them to
circles on import. The break happens when converting to polygons for
viewing, the arc is passed from start->mid->end format to
center->start->angle format. At 360°, the angle is normalized to 0
2021-12-18 18:44:20 +00:00
a17a58203b
Preserve legacy dimension information.
2021-12-17 23:31:37 +00:00
699ba78b74
Fix legacy (pre-sexpr) board importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10025
2021-12-17 17:21:31 +00:00
1610195a09
Coverity fix
2021-12-15 23:17:04 -05:00
57af990066
router: fix layer switch issue when starting a track on via without fixed segments
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9915
2021-12-16 00:55:17 +01:00
20dcf43fdd
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10009
2021-12-15 23:39:24 +00:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
97c2627de6
router: added missing case items (fixes regression in component dragging)
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10010
2021-12-15 23:18:55 +01:00
24fe5bc2a8
Fix DRC thread locking
2021-12-15 06:05:40 -08:00
dadaf26ff1
Board Setup: Ensure board editor layers page always gets updated
...
We need to update it even if we move to a different page, as when moving
back to the physical stackup page it will reset the layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9991
2021-12-15 10:39:44 +00:00
40d44c94cd
Fix single-threaded loads/connectivity
...
We cannot set thread counts to hardware_concurrency()-1 without
considering that single core machines will get a thread count of 0.
2021-12-14 17:18:46 -08:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
aa64b739eb
Board stackup: Ensure that m_choiceCopperLayers is updated
...
Need to do a full synchronisation with the board to ensure that the
drop down and other UI elements are reset
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9991
2021-12-14 18:00:07 +00:00
78ff9a857a
Jerry-rig HTML-format alpha parsing
...
On wx3.0, the HTML format #RRGGBBAA cannot handle the alpha channel.
Instead, we route this through a COLOR4D routine when we need to use
these colors
Fixes https://gitlab.com/kicad/code/kicad/issues/9963
2021-12-13 16:04:40 -08:00
348c2bc612
Fix another wxUpdateUIEvent retrigger loop.
2021-12-13 18:43:30 -05:00
755607b8f8
Fix a few wxUpdateUIEvent retrigger loops.
2021-12-13 15:46:13 -05:00
4c565fd222
Top layers includes a whole bunch of layers...
...
... and the first isn't particularly meaningful. Use GetActiveLayer
instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/9972
2021-12-13 18:23:18 +00:00
8e5f929724
Fix default reference text copy for new footprints
2021-12-13 14:42:14 +00:00
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
88fc6d25a7
Correctly handle deleting multiple selections in some grids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9952
2021-12-12 17:28:17 +00:00
779629ad33
Fix deadlock
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9959
2021-12-12 07:20:03 -08:00
c360bbba20
Browse footprint libraries now remember window-size and position
...
(resolveCanvasType() saves the settings, so it must come after they are loaded)
Fixes #9935
https://gitlab.com/kicad/code/kicad/issues/9935
2021-12-12 09:02:15 +01:00
f2639e2928
Reverse sort order for net id in inspector
2021-12-11 23:12:47 +00:00
758ce43d9c
Lock Connectivity Data when resetting
...
When we reset m_connAlgo, we need to lock the data mutex otherwise,
yields to the system may sometimes issue calls back to invalid data
until m_connAlgo has finished rebuilding
Fixes https://gitlab.com/kicad/code/kicad/issues/9922
2021-12-11 15:11:10 -08:00
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
84e0feeee6
LibTree selection should follow footprint after Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:45:21 +00:00
4f60d7ac78
Don't use lib tree target if lib tree isn't shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:34:22 +00:00
62e6f542ed
Init zone type when creating in convert tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9918
2021-12-09 18:20:30 -05:00
196571d004
Fix edge case in re-enabling auto track width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9887
2021-12-09 18:07:05 -05:00
9884f40952
Update call signature for SwitchLayer
...
We don't use DC anymore
2021-12-09 10:14:11 -08:00
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
f2d6251979
PCB_EDIT_FRAME: very minor fix: make the frame title translatable in stand alone mode
2021-12-09 14:39:27 +01:00
48e95dcf7e
Disable custom track/via width when re-enabling connected width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9887
2021-12-08 21:13:34 -05:00
a9168860e0
Reduce excessive epsilon in polygon search algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9903
2021-12-08 21:04:23 -05:00
622d0fc896
Re-add code to refresh plugins at each frame load
...
Should now be safe
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9781
2021-12-08 20:48:35 -05:00
587ee890d9
Move where flag is cleared to catch more cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:46:53 -05:00
44e01dcd0a
Skip newly-added footprints in connectivity
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:39:12 -05:00
e9847cf2bd
Exclude vias from first 'U' step.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9902
2021-12-08 23:16:33 +00:00
1f9e75f676
Pad with hole same size or larger than pad isn't flashed.
...
... even if it's marked as being on copper layers.
Also changes the default hole clearance to 0.25mm.
Fixes https://gitlab.com/kicad/code/kicad/issues/9901
2021-12-08 23:16:33 +00:00
df1e74d418
Clean up dead code from last commit.
2021-12-08 23:16:33 +00:00
7ffd43a6f4
Regularize the promotion of pads to footprints in non-free-pad mode.
...
Also regularizes some of the other selection filtering options.
This also fixes an invalidated iterator (and subsequent segfault) in
the old code.
Fixes https://gitlab.com/kicad/code/kicad/issues/9896
2021-12-08 13:08:54 +00:00
1160bd94b0
Scale vertex lineweights in DXF import
...
DXF lineweights are always in 100th of mm, so scale the set weights on
import
Fixes https://gitlab.com/kicad/code/kicad/issues/9854
2021-12-07 16:23:44 -08:00
63f67b7e5b
Fix loading netclasses from legacy boards via Python
2021-12-07 18:55:08 -05:00
9c619d8f4e
Allow some navigation tools when selecting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9565
2021-12-07 23:00:39 +00:00
a7193e0932
Do not warp cursor to last location when footprint/text placement is activated from toolbar/menu.
...
Also makes the footprint appear instantly after closing the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9840
2021-12-07 22:48:56 +00:00
fbdb2bd91f
Fix broken refactor from 0e65fe5
...
'auto' here was utilizing a copy constructor to avoid assigning a new
value to the underlying shared pointer
2021-12-07 12:38:05 -08:00
c613f5e2f1
Convert DXF arcs in fp space
...
Once the arcs are set in pcbnew, they have integer representation and
can accumulate rounding errors. So we convert the start/end points in
the importer to ensure that the connected points in a DXF remain
connected
Fixes https://gitlab.com/kicad/code/kicad/issues/9827
2021-12-07 10:53:35 -08:00
84cdc9701f
Partially reverts d877f041
...
Based on discussion in https://gitlab.com/kicad/code/kicad/-/merge_requests/1029
we will keep the original behavior. The new routines to get stock paths
are still useful (possibly in scripting) and are kept
2021-12-06 16:14:40 -08:00
Seth Hillbrand
Jeff Young
Jon Evans
Tomasz Wlostowski
Mike Williams
Roberto Fernandez Bautista
Wayne Stambaugh
Simon Schaak
jean-pierre charras
dsa-t