e25d937fd8
Null-ptr safety for diff-pair-coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12329
(cherry picked from commit 854acd4c77
2022-09-02 01:18:18 +01:00
bf272e379f
Run hole-to-hole checks on Edge_Cuts layer.
...
Also makes the flashing logic inside PAD::GetEffectiveShape() easier
to understand.
Fixes https://gitlab.com/kicad/code/kicad/issues/12296
(cherry picked from commit e0f6a6e475
2022-09-02 01:11:20 +01:00
36a0c2a9cc
Fix issue with caches not being initialized when printing msg bar.
...
(cherry picked from commit 43df863df2
2022-08-04 13:04:21 +01:00
55de16e874
Remove extraneous files added in 69858ab4c0
...
Files were master-only
2022-06-30 11:09:03 -07:00
45329ceafa
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
(cherry picked from commit 4043dca613
2022-06-21 10:30:42 -07:00
69858ab4c0
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
(cherry picked from commit 5327b10064
2022-06-21 10:27:21 -07:00
d0796399a2
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
2022-04-11 16:55:54 -07:00
529048dac1
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
(cherry picked from commit 722b2588f4
2022-04-09 23:09:10 +01:00
f8c92e355b
Plating thickness appears on both sides of hole wall.
2022-04-04 21:51:30 +01:00
8054f1a948
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
(cherry picked from commit f7cdc7af75
2022-04-03 18:23:41 +01:00
eeee5afdfd
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
(cherry picked from commit b679a21651
2022-03-21 20:56:00 +00:00
ff604cc6a3
Pull some fixes back from master.
...
Mostly wxT(), but also some performance, and some for better response
to Cancel button.
(cherry picked from commit 5c63df28e4
2022-03-18 12:49:54 -07:00
b0f8055377
Revert "Pull some fixes back from master."
...
This reverts commit 5c63df28e4
2022-03-17 16:21:37 -07:00
5c63df28e4
Pull some fixes back from master.
...
Mostly wxT(), but also some performance, and some for better response
to Cancel button.
2022-03-16 15:15:09 +00:00
53bd87d792
Performance fixes for the board from hell....
...
(cherry picked from commit e4b56ab7f1
2022-03-16 15:14:51 +00:00
9e5e46514d
More wide-string declarations.
2022-02-05 13:29:00 +00:00
c2707f3cc0
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
2022-01-28 17:07:11 -08:00
c02cadec2a
Exclude rules which match no enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10227
(cherry picked from commit 0967cc82e2
2022-01-21 15:06:18 +00:00
11c967b259
pcbnew: Add via height support in drc length
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10135
2021-12-30 14:34:44 +00:00
24fe5bc2a8
Fix DRC thread locking
2021-12-15 06:05:40 -08:00
40d44c94cd
Fix single-threaded loads/connectivity
...
We cannot set thread counts to hardware_concurrency()-1 without
considering that single core machines will get a thread count of 0.
2021-12-14 17:18:46 -08:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
40e6a9a926
Fp editor: add DRC test for through hole pads without hole.
2021-10-19 14:47:29 +02:00
856cc26d4c
Allow vias the same same-net waiver that pads have for hole clearance
...
Note that in 7.0 we have physical_hole_clearance rules to give a bit
more expressivity here.
Fixes https://gitlab.com/kicad/code/kicad/issues/9420
2021-10-18 18:09:40 +01:00
b52529521e
Replace individual LIB_* shapes with LIB_SHAPE (based on EDA_SHAPE).
...
Also moves to more capable FILL_T model that can be shared.
2021-10-15 12:45:43 +01:00
fce054319c
Update DRC MatchDPSuffix routine
...
This matches the router matchDPSuffix routine until we merge the two
into a common utility
2021-10-11 10:33:50 -07:00
dfe4997664
Fix nullptr crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9250
2021-09-27 10:27:25 +01:00
3e7310a219
Move FP type check to FP DRC
...
Checks for validity are better centrally located where they don't
interrupt user actions
2021-09-25 08:56:27 -07:00
c38de1dcaf
Pull back some 7.0 fixes to Custom Rules code completion.
2021-09-23 13:08:31 +01:00
814b6b8e86
Fix disabled layer error text
2021-09-12 17:14:24 -04:00
0ac765c5bb
Special case footprint zones which can be on "inner layers".
...
Also improves the reporting so that it reports the actual conflict
layer rather than just the first layer the object is on.
Fixes https://gitlab.com/kicad/code/kicad/issues/9144
2021-09-12 13:53:12 +01:00
1a43515128
Repair multi-layer disabled layer tests.
2021-09-09 16:43:47 +01:00
bb2efa0649
Improve disabled layer test.
...
1) handle graphic items on copper layers
2) handle items on multiple layers
2021-09-09 15:20:48 +01:00
3b16c38756
Coverity issue fixes.
...
Fix Coverity issues 157138, 338547, and 338716.
2021-09-08 14:51:27 -04:00
a397e85589
Implement PTH/NPTH/courtyard collision tests.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9081
2021-09-04 00:16:26 +01:00
436ad0ede7
Add missing token to DRC rule parser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9041
2021-08-27 12:49:07 +01:00
f4905cb1ae
Cherry-pick fix from 7.0 branch back to master.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9005
2021-08-25 20:14:11 +01:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
9770962ab4
Fix logic bug in rule processing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9011
2021-08-22 20:16:58 +01:00
1fa5e43597
Fix some dodgy logic in clearance overrides.
2021-08-22 03:24:51 +01:00
3e57700b21
Process rules in "natural" order using overrides.
...
(We used to process in reverse order with first-match-wins, but
that doesn't allow min, max and opt to come from different rules.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9004
2021-08-21 16:43:11 +01:00
1e23ce1c95
Pull some fixes back from 7.0.
...
1) An earlier 6.0 fix to apply pad clearance overrides to NPTH pads
got broken, so this replaces it.
2) Allow min/max/opt to be set by different rules.
3) Fixes a bug where board minimum enforcement over a local override
didn't get the right message text.
2021-08-21 16:43:11 +01:00
8b5f393804
DRC bug fixes and debugging improvements.
...
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
2021-08-17 15:41:12 +01:00
1a252b4f96
Add a compile error for ill-defined rules, and more performance.
...
Also adds const-safety to GetBoard().
2021-08-16 12:14:17 +01:00
eaccbce48b
Fix logic errors in progress reporting in a couple of DRC providers.
2021-08-15 22:24:44 +01:00
1ec70d30af
Cherry-pick some 7.0 Clearance Resolution improvements.
...
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
Jeff Young
Seth Hillbrand
Erwan Rouault
jean-pierre charras
Jon Evans
Wayne Stambaugh