c6e4dcbecf
Pcbnew: fix incorrect geographical annotation dialog message.
2021-06-29 17:11:37 -04:00
e4c108ee3a
Pcbnew: minor geographical annotation dialog user message improvements.
...
Remove schematic from the completion message as it can no longer be
updated though the dialog.
Add a warning to synchronize the schematic with the annotation changes.
2021-06-29 15:17:00 -04:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
0c2ac9a711
Move GUI font code to common.
...
This also allows the Mac fixes for font facenames to be more
compartmentalized.
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 18:27:58 +01:00
64f07ea9c6
Update text variables after changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8697
2021-06-29 13:55:06 +01:00
1db33c7b3a
More safety (and better impl) for not sharing FP table/info stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 12:46:16 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
d296bec5b8
Differentiate aSingleLine mode for SCINTILLA_TRICKS
...
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
2021-06-28 11:20:12 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
08fb05e522
Make sure HPGL and DXF drill map generators honour origin setting.
...
ADDED: also adds origin setting to Footprint Position File dialog
and generators.
Fixes https://gitlab.com/kicad/code/kicad/issues/8669
2021-06-27 17:40:20 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
70ac70f360
Don't attempt to round-trip netnames through wxListBox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8684
2021-06-27 12:02:21 +01:00
1fcd7992a0
Performance improvement for adding/removing dielectric layers.
...
(Roughly a 10X speedup on Mac.)
2021-06-27 09:43:20 +01:00
b924c85f80
Start recording the precision of dxf imports
2021-06-27 00:38:19 -04:00
0f27618125
Use a list dialog that can be parented by the Board Setup dialog.
...
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-06-27 01:41:35 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
4c5df22eb0
Don't show busy cursor when dialogs (including progress) are in use.
...
Also removes a stale comment.
Also moves the progress reporters earlier to lessen need for busy cursor.
Also cleans up some error strings and makes other more easily translatable.
2021-06-26 22:53:24 +01:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
95ec9c786c
Board setup spacing.
2021-06-26 10:55:31 +01:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
9f51f7b055
Formatting and include cleanup.
2021-06-25 17:48:15 +01:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1f4a56005e
Remove extraneous isPrinting test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8609
2021-06-25 12:44:51 +01:00
4eafd2664a
FootprintWizardBase.py: fix use of cmp(), non existing in python3
...
Fixes #8677
https://gitlab.com/kicad/code/kicad/issues/8677
2021-06-25 09:04:49 +02:00
27804e40e2
Go back to using space-width for tabs (instead of max-char-width).
...
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
2021-06-24 23:53:27 +01:00
232ffe97be
Diff pair gap only overrides netclass clearance when it's smaller.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8676
2021-06-24 16:56:53 +01:00
744dadd412
Naming conventions and formatting.
2021-06-24 16:56:53 +01:00
a89f6404b4
Fix logic bug found by Coverity.
2021-06-24 12:18:22 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
95ab53d119
pcbnew: fix missing layer names and missing layers in stackup table
2021-06-24 08:52:51 +00:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
27e9750507
Pcbnew: fix footprint selection bug.
...
Do not remove footprint objects from list of selected objects when there
are no drawable objects other than the reference and value text.
Increase the minimum size rectangle for footprints from 0.025mm to 1mm
when the footprint has no drawing objects so that it is easier to select
the footprint in this case.
Add some pretty colors to the footprint bounding box and hull outline
so that it's possible to tell the difference between selection areas.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8379
2021-06-23 19:46:33 -04:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
ae612a454e
Make blind via rendering more intuitive by putting top on top...
...
bottom on bottom, and the via colour larger.
2021-06-22 18:24:46 +01:00
7efca0113d
Reset m_inDrawingTool on exit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8653
2021-06-22 13:02:45 +01:00
a31b667e2a
Plotter: better shape for CHAMFERED_RECT and ROUNDRECT pads with margin.
...
The shape of the pad+clearance area is not similar to the shape drawn on screen
2021-06-21 18:55:33 +02:00
9fb77473cd
pcb_painter.cpp: fix incorrect shape of CHAMFERED_RECT pads with negative clearance.
...
Negative clearance (for instance on mask or paste layer) was not taken in account
2021-06-21 18:52:57 +02:00
00b4134eb8
pcb_painter.cpp: fix incorrect shape of ROUNDRECT pads with negative clearance.
...
If a negative clearance (for instance on mask or paste layer) is set to more
than the corner radius, the drawn shape was broken (fully incorrect size)
2021-06-21 13:44:30 +02:00
685ee31c35
Workaround a few more OSX printf problems.
...
Also regularizes the frame title processing.
Also fixes a type where the library name wasn't processed for
variable expansion.
Fixes https://gitlab.com/kicad/code/kicad/issues/7742
2021-06-20 22:48:19 +01:00
de4eb1fcef
Convert to zone: take dest layer from editor active layer
...
Show non-copper zone properties if active layer is non-copper
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8646
2021-06-20 15:13:18 -04:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
89718dd3ba
Naming conventions.
2021-06-19 19:36:53 +01:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
d26449cc29
Formatting.
2021-06-19 11:37:20 +01:00
f8e9542004
Fix crash when opening board setup after zone filler exits
2021-06-18 12:23:12 -04:00
3072422538
Allow caller to specify which library table to add library to.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8013
2021-06-18 11:39:18 +01:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
16047b7419
3D preferences bug fixes.
...
1) Make sure prefs get saved when closing parent frame.
2) Add camera projection mode to settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/8110
Fixes https://gitlab.com/kicad/code/kicad/issues/8626
2021-06-17 12:22:18 +01:00
1722bc03b0
Consistent terminology and punctuation.
2021-06-17 00:05:17 +01:00
cbd9208d73
Fix missing translation
2021-06-16 12:48:47 -07:00
7953a5c62b
Work around MacOS printf/format issues
...
MacOS wxWidgets implementation of wxPrintf/Format suffers from some
issues when mixing string types. We avoid this by manually formatting
the string ourselves.
Fixes https://gitlab.com/kicad/code/kicad/issues/8404
2021-06-16 11:54:55 -07:00
c8444913df
Implement lock between zone filler and drc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
db19ae226a
PANEL_PCBNEW_ACTION_PLUGINS: fix not working "open plugins folder" on Linux
2021-06-16 08:15:20 +02:00
8f9800f760
Fix pad shape for certain legacy circular pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8615
2021-06-15 22:25:55 -04:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
5b8f32acd2
Python script sample: fix compatibility with recent changes in code.
2021-06-15 18:19:58 +02:00
142dd48c99
SCRIPTING_TOOL::showPluginFolder(): fix wxWidgets3.14 compatibility (Linux mainly)
2021-06-15 18:19:58 +02:00
3616a8f0ee
Use polygon coordinates relative to the board.
...
Footprint polygon coordinates are relative to the footprint.
Translate to the board coordinates when doing hittest with
a (selection) rect.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8596
2021-06-15 15:04:11 +00:00
38f18d0505
Fixed according to KiCad Style Guide.
2021-06-15 14:59:04 +00:00
aed0352828
pcbnew: Replace CR inserted on macOS instead of LF when CTRL+Enter is pressed.
2021-06-15 14:59:04 +00:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
fbbe723811
Fix board_item.i after recent changes in Pcbnew code.
...
(some class names changed)
2021-06-15 10:59:52 +02:00
5d9ff0b9b7
Step export dialog: save 2 options in config file.
...
2 options (overwrite file and replace 3d shapes) were not saved previously.
2021-06-15 09:33:37 +02:00
fb46cd8bc5
Expunge the use of the word component from Eeschema code.
...
The only exception to this is the SPICE simulator's use of component
when referring to physical component (R, L, C, etc.) values.
2021-06-14 14:00:21 -04:00
30f3d11355
fix possible incompatibilities of python scripts due to recent code cleaning
2021-06-14 18:57:05 +02:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
0527dc6fe0
Fp editor: fix initialization of default courtyard line thickness.
...
When no config file found it was initialized to DEFAULT_SILK_LINE_WIDTH,
although it was initialized to DEFAULT_COURTYARD_WIDTH in board editor.
Fixes #8344
https://gitlab.com/kicad/code/kicad/issues/8344
2021-06-14 08:31:55 +02:00
82f3df4086
Attempt to fix Python qa code after renames
2021-06-13 11:20:19 -04:00
5bb6b1a3cc
Minor cleanup.
2021-06-12 11:39:28 +01:00
3644224cb6
Build smoothed area at outline
...
The clearance to board edge will be set by the knockout routine.
Clipping twice can leave small imperfections in the edge that need to
get triangulated
2021-06-11 14:26:38 -07:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
44086ff2b2
Pull 3D preferences into KiCad preferences architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5187
2021-06-11 11:19:40 +01:00
5492fafdf4
Pcbnew: allows access Layers context menu when right clicking from below layers list
...
Fixes #6614
https://gitlab.com/kicad/code/kicad/issues/6614
2021-06-11 09:32:47 +02:00
d8b1e827c7
Check all previous merge events
...
Typo only continued merge loop when last element was successfully
merged, leaving tracks where multiple segments were colinear
Fixes https://gitlab.com/kicad/code/kicad/issues/5020
2021-06-10 16:59:35 -07:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
1c3df973d6
Coverity warnings fixes.
2021-06-10 13:45:02 +02:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
410dbe17de
Fix inital predefined track width selection in track properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8578
2021-06-09 09:59:25 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
c650d47626
Add warning message on non-unity scaling
...
When exporting STEP model, warn the user if one of their footprints has
a non-unity scaled model as this compromises the integrity of the STEP
export.
Fixes https://gitlab.com/kicad/code/kicad/issues/1781
2021-06-08 16:38:47 -07:00
b891b5e1e2
Do not blindly substitute model names
...
Makes model substitution (VRML->STEP in STEP Export) optional. This can
prevent nasty surprises where the user doesn't see/can't affect the
outcome
Also, when substituting models, do not maintain scale factor. So a VRML
model with non-unity scaling will not be export as a STEP file (of the
same name) with non-unity scaling. This is the first step to address
https://gitlab.com/kicad/code/kicad/-/issues/1781
2021-06-08 16:38:47 -07:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
c854811ac4
Parent frame already includes undo_redo_container.h
2021-06-08 19:12:30 -04:00
2aaec31832
Don't put up "old version" warning for gerbview-generated PCBs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8574
2021-06-08 22:12:44 +01:00
e6346e3103
Pass objects by reference instead of on the stack part 2.
2021-06-08 13:47:21 -04:00
75ce97e260
Fix the last cause of duplicate segments when completing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-07 20:34:09 -04:00
9268340dcc
Kick wx.h out of pcbnew
2021-06-07 18:38:51 -04:00
97a2c4094b
Don't label free pads with connections as '*'.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8385
2021-06-07 23:36:37 +01:00
3d32c096ab
Fix some problematic double-quotes.
2021-06-07 23:36:37 +01:00
8f2819cfa4
Kill the last of wx/wx.h in headers
2021-06-07 17:59:20 -04:00
022dd6072c
Add utility method to resolve symlinks
...
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
2021-06-07 20:59:59 +00:00
542c02046b
Write through symlinks for schematics and PCBs
2021-06-07 20:59:59 +00:00
891e200fc8
Use Python to test for modules (not CPython)
...
CPython call requires Python 3.8+, so we work around to keep the 3.6
users happy
Fixes https://gitlab.com/kicad/code/kicad/issues/8554
2021-06-07 13:56:31 -07:00
d4edc70f65
Remove magic numbers where possible
...
Constant scales will be pre-calculated during compilation, so we can
leave the actual formula in place without penalty
2021-06-07 13:56:31 -07:00
3ff670d2a4
Disable ACTIONS::openPreferences for now.
...
wxWidgets needs to move the item to the KiCad menu on Mac, and it
can only find it if it has the id wxID_PREFERENCES.
2021-06-07 20:51:45 +01:00
6cfc2755ed
Remove a useless "#include wx/wx.h" from wx_html_report_panel.h
2021-06-07 09:26:13 +02:00
49c5130123
PNS: Implement final cleanup pass for redundant colinear segs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-06 21:52:35 -04:00
83080b67f5
Fix build on wx 3.0
2021-06-06 20:21:21 -04:00
3c6b98a0d5
PNS: preserve auto-detected track width when changing via sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8046
2021-06-06 20:18:09 -04:00
99710aba48
PNS: use slightly less greedy algo to reset the mouse trail
2021-06-06 19:47:52 -04:00
0bc0f2265e
dialog_board_statistics.h shouldn't leak confirm.h
2021-06-06 19:34:53 -04:00
6cb8154ec0
PNS: Remove code that broke width changes during placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
2021-06-06 19:21:52 -04:00
5bb6f8c5e3
hashtables.h doesn't need eda_item.h
2021-06-06 19:11:35 -04:00
33bbf85a3e
Use the parent frame GetSettings helper rather than including for Pgm()
2021-06-06 19:05:12 -04:00
6789dac20b
PNS: Keep most recent good placement around for a rainy day
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
2021-06-06 18:56:33 -04:00
c9bc45f7ed
PNS: Limit the maximum walkaround distance factor
...
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 16:03:03 -04:00
d32b9c1c25
Use debug group for line placer debug
2021-06-06 15:44:53 -04:00
f5185f6927
Revert part of the anti-churn change, it causes bad side-effects
...
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
2021-06-06 15:44:53 -04:00
66640f6144
Try and fix fedora build
2021-06-06 15:30:42 -04:00
8377ebb0e1
Fix msvc warnings
2021-06-06 15:30:31 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
e4530fcf0d
PCB_MARKER does not need pcb_base_frame
2021-06-06 15:03:42 -04:00
5349f47f95
PNS: Prevent walkaround churn in unsolvable situations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 14:57:52 -04:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
dc27079b71
cleanup tool event and tool action includes
2021-06-06 18:26:26 +01:00
0d7e48d5b1
Coverity fix.
2021-06-06 17:57:46 +01:00
17da050e69
Improve walkaround results when last point is inside the hull
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
2021-06-06 12:55:32 -04:00
be61bf29dd
Use more accurate hull shapes for round solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
2021-06-06 09:53:51 -04:00
581ba21865
Remove wx includes out of cadstar_archive_loader.h
2021-06-06 09:28:02 -04:00
b610b905fc
Cleanup track.h includes
2021-06-06 09:06:55 -04:00
3b7480c1c1
PNS: Invalidate start/end items after finishing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
2021-06-06 08:52:39 -04:00
2d584ca5ec
board_item.h already included via board_connected_item.h
2021-06-06 08:47:59 -04:00
17d680de08
netinfo.h does not need to be in board_connected_item.h
2021-06-06 08:45:38 -04:00
4712d7a918
Remove a leaky wx/msgdlg.h include
2021-06-06 08:45:38 -04:00
e6c09b55a9
Remove unnecessary reporter.h include
2021-06-06 08:45:38 -04:00
dd9b8a9f73
Remove pcbnew.h includes in headers
2021-06-06 08:25:28 -04:00
c9a660a80c
Rework JSON integration to speed up build
2021-06-05 17:08:38 -04:00
06e967354f
Fix symlink read-/write-through code
...
Use `realpath(3)` instead of `readlink(3)`, which offers support for
relative and absolute symlinks alike, since all symbolic links will be
resolved to the absolute path of the linked-to file.
Fixes #8082
2021-06-05 14:22:50 +00:00
86add3bb85
Fix MSVC C4312 warnings when casting 32bit ints to pointer types on 64bit builds
2021-06-05 02:57:51 +00:00
d32d107923
Fix local ratsnest tooltip to mention "toggle".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8415
2021-06-04 23:17:54 +01:00
ab04e24f9a
router: rhMarkObstacles should return a correct error status
...
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
2021-06-04 23:58:56 +02:00
f57ef55cd6
Pcbnew header housekeeping round 3.
2021-06-04 13:50:08 -04:00
c69c68a558
Pcbnew header housekeeping round 2.
2021-06-04 12:21:48 -04:00
2a6c7a7c0f
Pcbnew header housekeeping round 1.
2021-06-04 09:08:38 -04:00
2533fb22b3
Add the new pcb item container header to the SWIG wrapper
2021-06-04 12:49:11 +01:00
d8499e4914
I fixed the wrong typo in 6e272429, heh
2021-06-03 22:39:14 -04:00
6e2724294a
Fix typo in action description
2021-06-03 21:27:28 -04:00
0c879eead3
Cleanup headers in pcbnew pcad importer
2021-06-04 01:28:40 +01:00
f94816fbd4
Cleanup wx includes in the filter reader
2021-06-04 01:26:58 +01:00
3d4ce0796e
Add Gerber plot for SHAPE_ARC and SHAPE_LINE_CHAIN
2021-06-03 17:12:56 -07:00
00791e1e37
Fix compile issues on clangd.
2021-06-03 23:41:06 +01:00
1c1ba25ffd
Use char_str instead of c_str in previous commit
2021-06-03 18:13:35 -04:00
daf510344f
Fix build error due to pns changes
2021-06-03 18:05:48 -04:00
4e94b1fe86
Remove the universal sockets include
2021-06-03 17:59:46 -04:00
6f5cb1f97d
Fix printing of hidden refs and/or values.
...
IsLayerVisible() is patched to always return true when printing
(even when "print according to appearance settings" is checked, and
that's too risky to change at this point. So we also look to see
if the layer colour is set to the background colour.
Fixes https://gitlab.com/kicad/code/kicad/issues/8548
2021-06-03 22:44:04 +01:00
63fc7a1908
router: support for drag/walkaround/shove for joints between lines of different widths.
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
2021-06-03 22:44:53 +02:00
af26eab5fb
router: even more debug in SHOVE
2021-06-03 22:44:53 +02:00
a744857267
router: fix array out-of-bound error in HullIntersection()
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
2021-06-03 22:44:53 +02:00
3e98c44636
router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs.
...
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
2021-06-03 22:44:53 +02:00
e5e588ebba
router: temporarily export LINE::Walkaround() debug global variables
2021-06-03 22:44:53 +02:00
70ed5c1ae8
router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths.
2021-06-03 22:44:53 +02:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
23f8851409
Remove pcb_group include from board header
2021-06-03 20:03:31 +01:00
7bbf1b07b7
Fixup to expose PCB_GROUP in Python
2021-06-03 20:00:45 +01:00
e2e963d14a
Adding PCB_GROUP to python interface
2021-06-03 18:55:46 +00:00
49d65a0765
Fix some includes.
2021-06-03 18:33:59 +01:00
7c14e4e967
Common widget header housekeeping.
2021-06-03 12:02:45 -04:00
f40f696c37
Don't extract dp segment info from minimal-length
...
segments with 1IU of length are approximately parallel to everything and
the distance projections break down into rounding errors
Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-03 08:44:17 -07:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
7faee5eda5
Stop salt the eart with wxhtml.h
2021-06-03 07:49:49 -04:00
d79dd39be3
Remove redundant headers
2021-06-03 02:19:36 +01:00
3ab69939f9
Remove wx.h from many files
2021-06-03 02:19:20 +01:00
af2707929d
Don't leak a wx header via eda_item.h
...
Turns out this provided the translation header globally :D
2021-06-02 19:18:48 -04:00
9a07b03b4c
Replace boost::function with std::function
2021-06-02 18:39:43 +01:00
7f56ff4d42
Minor performance improvement
...
Don't keep searching the DRC RTree for collisions after we detect a true
(not clearance-based) collision
2021-06-02 08:15:37 -07:00
00ed75b891
Fix DRC performance with multi-layer keepout zones.
...
The main issue was a parameter mismatch which caused On^2 behaviour
for zone layers.
But there are several other performance optimizations here, along
with status bar updating for zones while running the dissallow test.
Fixes https://gitlab.com/kicad/code/kicad/issues/8521
2021-06-02 14:11:43 +01:00
eeb405c196
Cleanup some more excess math/util includes
2021-06-02 00:50:46 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
cfa2b57c68
Use logical OR to quiet static analyzer (no functional change)
2021-06-01 18:44:22 -04:00
65fee5b2ec
Clear m_out pointer at end of save
2021-06-01 18:44:22 -04:00
d12e5d824e
Renaming for clarity and a performance improvement in corner rounding.
2021-06-01 23:11:54 +01:00
208dd5cbd5
Cleanup string handling in fabmaster import
...
Avoids round-tripping std::string->c_str->std::string and makes a few
auto references explicit
2021-06-01 13:54:34 -07:00
63cc7d16b4
Repair board on open
...
We need to ensure that boards do not have duplicated KIIDs, so we repair
the duplicates when opening an existing file. This does not change the
file on disk until saved
2021-06-01 13:39:59 -07:00
e050d42658
Re-enable KICAD_SCRIPTING_WXPYTHON
...
This keeps wxpython behind a build flag for platforms (mingw) that do
not yet support it.
2021-06-01 20:18:24 +00:00
68a5d5dc01
Fix issue reloading plugins
2021-06-01 20:18:24 +00:00
bbcc840989
Cleanup rebase fns
2021-06-01 20:18:24 +00:00
88e4b7f7c4
Update Python Helpers
2021-06-01 20:18:24 +00:00
adf885b667
Move pcbnew swig
...
Separates the python scripts into those using swig and those needed for
other scripting
2021-06-01 20:18:24 +00:00
bf1437899e
Add Python Tool to pcbnew
2021-06-01 20:18:24 +00:00
c7d188a8d0
Centralizing SCRIPTING class
2021-06-01 20:18:24 +00:00
192fbfd5e5
Finalize Python Frame
2021-06-01 20:18:24 +00:00
81d58bcea9
Working python window
2021-06-01 20:18:24 +00:00
6fbbba8db3
Adding Python shell KIFACE
2021-06-01 20:18:24 +00:00
f274a00c08
Remove PYTHON_* compile options
2021-06-01 20:18:24 +00:00
247da631f9
Revert "Fix typo and clean up leftover tracks"
...
This reverts commit ed66c0f14d1a102f03c0https://gitlab.com/kicad/code/kicad/-/issues/8526
2021-06-01 11:18:00 -04:00
d7616fdca8
Fix a few compil or coverity warnings.
2021-06-01 09:04:37 +02:00
ed66c0f14d
Fix typo and clean up leftover tracks
2021-05-31 22:42:56 -04:00
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
6381ffd10a
Fix diff pair coupling test when gap constraint is in a different rule
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8519
2021-05-31 10:13:05 -04:00
c4cabb38d5
More worksheet -> drawing sheet cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8516
2021-05-31 12:26:44 +01:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
1b94534451
Revert "Use lambdas to fix paste conditions"
...
This reverts commit 65c7c77c3d
2021-05-30 21:25:42 -04:00
5c543b62c5
Cleanup: Use make_unique for the legacy plugin board deleter
2021-05-30 20:56:44 -04:00
65c7c77c3d
Use lambdas to fix paste conditions
...
`SELECTION_CONDITIONS::Idle && ` was evaluating as always true because this was referencing the function pointer
2021-05-30 20:37:16 -04:00
a7d1ef9927
Fix some more uninitialized warnings
...
From PVS Studio
2021-05-30 20:05:37 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
b7f32d7f53
Clean up some layout of pages in Board Setup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8474
2021-05-30 14:04:00 -04:00
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
8e2fb1bdb9
Treat Cut like a Delete while in a Move.
...
Also fixes problem where second action wasn't getting executed because
the event was getting eaten.
Fixes https://gitlab.com/kicad/code/kicad/issues/8072
2021-05-29 22:10:43 +01:00
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
f6d6b7d263
Harmonize property names for zone/footprint/pad clearance and thermals
...
Use "override" instead of "local" for better clarity.
2021-05-29 14:12:23 -04:00
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
eff9746f34
CHANGED: Net highlight in PcbNew is now persistent to match Eeschema
...
CHANGED: Highlight net tool changed to highlight display toggle; moved to left toolbar
CHANGED: Multi-net highlight is now accessible when using the highlight net action
ADDED: Highlight Net and Clear Highlight actions to Net Tools context menu
ADDED: Default hotkey (Ctrl+`) for toggling net highlighting
The current and previous net highlight state are now stored and can be toggled
on or off with an action (no hotkey by default).
Highlight is now treated as a persistent state rather than a tool that is entered,
meaning there is no longer a special tool to enter in order to highlight nets.
Highlighting can be controlled while any other tool is active using the hotkeys
or context menu on a net object.
Tweak the icons for highlight net and layer display mode to better disambiguate them.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8250
2021-05-29 12:40:24 -04:00
81c7fb61f8
Sub-menu "Preferences..." in main menu "Preferences": fix not working accelerator key.
...
Accelerator keys are disable in our WX_MENUBAR. A common ACTION_MENU is used and
"Preferences..." is now shown in Hotkeys list.
2021-05-29 18:09:49 +02:00
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
752ae4d519
Rename modification flag routines
...
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
2021-05-28 12:07:04 -07:00
b1dcf74042
Use standard "Untitled" name for files without names
...
Also translates to provide useful information regardless of language
2021-05-28 11:51:54 -07:00
d7f219e98f
Unify IsSave and IsModify
...
The flags and calls were used identically, leading to potential
confusion/bugs. Testing for modification should go through
IsContentModified()
2021-05-28 11:51:54 -07:00
64cd401bdb
Delete Tool: Fix missing "Item Locked" popup
...
Fixes problem identified in https://gitlab.com/kicad/code/kicad/-/issues/8392
Removes same popup from schematic tool because SCH_ITEM can not be locked
2021-05-27 05:38:51 +00:00
4fb643df93
Update POINT_EDITOR when locking/unlocking via Hotkey/RMB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8489
2021-05-26 16:03:35 +01:00
ba73456d49
Allow point editor to persist
...
After drawing a graphic, allow the control points to persist when
exiting the tool.
The effect of this is to make the first "Esc" press a
"return-to-select-tool" event without modifying the selection or control
points from within the drawing tools. The section "Esc" press, when in
the selection tool will clear the selection and the control points
2021-05-25 16:47:54 -07:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
0eed73ea73
Make PCB_POINT_EDITOR honour locked flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8254
2021-05-25 18:13:24 +01:00
5f22025611
Don't drop text on Edge.Cuts when plotting.
...
While -our- user model is that Edge.Cuts is just for edges, it's best
not to dictate a particular model to users.
ADDED a DRC error when text (or a dimension) appears on the Edge.Cuts
layer.
Fixes https://gitlab.com/kicad/code/kicad/issues/8470
2021-05-24 19:54:52 +01:00
8f3343b9e3
Clear UUID paths of unmatched footprints even when not deleting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8461
2021-05-23 22:50:11 +01:00
ab8428bd68
Naming conventions.
2021-05-23 22:21:34 +01:00
9554aaee7f
Can't use wxDD_MULTIPLE before 3.1.4.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 22:19:37 +01:00
ee00d8386f
Make sure dir case can handle multiple selection too.
...
Files case already can.
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 20:39:26 +01:00
baf868fce7
Add footprint repair tool (currently just for duplicate IDs).
2021-05-21 17:52:11 +01:00
0d8a9a1091
Make sure that a tool never exits with autopan or capture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8459
2021-05-21 14:53:58 +01:00
3de60231db
Allow clearance debugging of exact items in DRC violation.
...
ADDED: Run clearance resolution tool... RMB menu item to DRC
clearance errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-21 00:00:24 +01:00
e93e9fa3e5
Add rudimentary type checking to rule eval with reporter.
...
Also cleaned up existing error reporting to not expend CPU cycles
when there was no reporter.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-20 23:06:24 +01:00
Wayne Stambaugh
Roberto Fernandez Bautista
Jeff Young
jean-pierre charras
Marek Roszko
Thomas Pointhuber
Fabien Corona
Jon Evans
Seth Hillbrand
Eeli Kaikkonen
Michal Schulz
Mikolaj Wielgus
luz paz
david-beinder
Johannes Maibaum
Ian McInerney
Tomasz Wlostowski
Jean-Samuel Reynaud