0814219513
Clean up some handling of project files in standalone
...
Add control of project creation to Eeschema; change defaults
to enable project creation in both programs. Properly set
project on newly-created schematics so "Save As" doesn't
get triggered repeatedly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9000
2021-08-21 12:09:21 -04:00
4da0c897bc
Fix flagging power pin in ERC check
...
IsPowerConnection() is too restrictive a check
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8881
2021-08-21 11:19:09 -04:00
44ea3a75f2
Simulator: Use last workbook path stored in .kicad_pro as initial path in dialogs
...
Previously this was done using a static variable, which was not loaded
from .kicad_pro on simulator launch, causing unexpected behavior
Fixes https://gitlab.com/kicad/code/kicad/issues/8799
2021-08-20 23:23:23 +00:00
1d8fd22cd8
Symbol editor: fix message panel units when selecting from combo box.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8991
2021-08-20 15:45:57 -04:00
eefac5cc59
eeschema: fix in populating DC sim settings tab
...
When filling drop-down list with sources, previous selection should be
saved in local variable and restored if it is still available.
2021-08-20 19:23:13 +00:00
691b53d125
eeschema: add missing virtual destructors
2021-08-20 19:23:13 +00:00
bee3d78d78
Limit Eeschema find/replace entries
...
Standardize maximum find/replace entries to 10
Fixes https://gitlab.com/kicad/code/kicad/issues/9007
2021-08-20 11:48:02 -07:00
75e4fa9b75
Handle multiple annotation in search
...
New schematic format needs to search client screen paths instead of
maintaining multiple copies in a flat format.
2021-08-20 10:24:08 -07:00
6470be11c3
Add clarifying comments to EE_RTREE ordering
2021-08-20 08:49:43 -07:00
729ba1e301
Ensure deterministic Find/Replace ordering
...
Sorts first by x and then by y when returning search order
Fixes https://gitlab.com/kicad/code/kicad/issues/8972
2021-08-20 08:42:06 -07:00
09be1a8c78
Ensure sheets are deterministically sorted
...
Even if a sheet exists at the same x/y coordinate as another, the sort
needs to ensure a deterministic ordering
2021-08-20 08:31:01 -07:00
13083c80c2
Eeschema, dialog Find: do not force a position on screen when reopen dlg.
...
The last position will be used.
Fixes #8969
https://gitlab.com/kicad/code/kicad/issues/8969
2021-08-19 15:40:38 +02:00
dfacac5eb6
Repair label incrementer to handle formatting constructs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8992
2021-08-19 00:08:37 +01:00
9549a227ad
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8993
2021-08-18 23:38:11 +01:00
8879b887df
Fix missing overbar notation conversions in legacy library parsing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8981
2021-08-18 22:48:29 +01:00
46b959c3e3
Move plotter headers into include folder.
2021-08-18 16:38:31 -04:00
6427197962
Remove duplicate headers in plot and associated code.
2021-08-17 15:41:25 -04:00
fc4d748bdc
Fix bugs in sheets.
...
1) Default_line_width is in mils, not IU.
2) Plot sheet fields.
Fixes https://gitlab.com/kicad/code/kicad/issues/8984
2021-08-17 13:21:52 +01:00
8c9b0bdba4
Eeschema: plot missing sheet fields.
...
Fixes #8984
https://gitlab.com/kicad/code/kicad/issues/8984
2021-08-17 13:30:23 +02:00
dd24502255
Clean up (yes, yet again) the default pen width handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8980
2021-08-17 11:59:50 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
1818846cff
Minor improvements to some error messages.
2021-08-14 12:11:47 +01:00
bed51a5fc1
altium schematic importer, replace record 211 with compile masks
2021-08-14 11:05:56 +00:00
08d7899f7e
Rework on hint to user when pin scope control has no effect or unexpected result.
...
A info banner is now shown (in synchronized mode) to inform an user when extra
pins are added to other units when a new pin is added.
A good info about the synchronized mode is not easy to create.
2021-08-14 10:21:25 +02:00
766b67a8f1
Tune selection of wire endpoints near other objects
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8941
2021-08-12 22:04:24 -04:00
7075aece3a
Hint to user when pin scope control has no effect
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8907
2021-08-12 21:19:27 -04:00
fbb3f4b58d
Escape names when migrating legacy libraries.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8951
2021-08-12 22:07:57 +01:00
04c6b79350
Eeschema: remove unused and unnecessary code.
...
When swapping SCH_SYMBOL objects during undo, no special processing is
required. The SCH_PIN objects are updated when the LIB_SYMBOL objects
are swapped and the call to SCH_SCREEN::SwapSymbolLinks() didn't do
anything.
2021-08-11 14:30:29 -04:00
c536a4c4f2
Work around annoying wxWidgets assert.
2021-08-10 16:51:30 +01:00
6eb59b9d9e
Dialog naming conventions.
2021-08-06 20:54:26 +01:00
76bdb423d7
Minor changes: minor code cleanup and fix minor Coverity warning
2021-08-04 16:47:41 +02:00
48e0f68c7e
Improve ease-of-use of color preferences.
2021-08-04 13:55:42 +01:00
95b87ba29a
Freshen microwave polygon dialog and remove a bunch of dead code.
2021-08-03 01:11:11 +01:00
c34f45f646
Split global label size expansion from TextOffset setting
...
Global label expansion ratio default is now 37.5%
Wire text offset default is now 15%
2021-08-02 16:40:36 +00:00
bab13debcb
Improve overbar rendering in PCB and global labels
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8584
Moves the font slightly down in global labels
Keeps font with overbar at the same size in PCB OpenGL renderer
2021-08-02 16:40:36 +00:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
d40712d9d6
Formatting and message consistency.
2021-08-01 21:31:23 +01:00
6ab45d0a6d
Fix double-escaping in Eagle importer.
...
This has actually been there since dot, but the old escaping method
just deleted chars it didn't like so you could run it as many times
as you wanted.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-07-31 20:07:25 +01:00
6cd4d68d57
Add drop shadows to MacOS icons
...
Apple UI guidelines ask for small drop shadows on the icons. We add
these using ImageMagick when resizing
2021-07-30 20:55:34 -07:00
e7d8b1a975
Resize MacOS icons and script their creation
...
Creates a script that will fomat the MacOS icons at 80% of the total
size in line with Apple's guidelines.
Script requires Inkscape 1.0 and png2icns (available on Linux boxen)
Fixes https://gitlab.com/kicad/code/kicad/issues/7977
2021-07-30 20:28:14 -07:00
ad8acd328c
Expunge some remaining references to kicad-pcb
2021-07-30 20:27:45 -07:00
f485ba9338
Fix netlist error when editing schematic symbols in place.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8798
2021-07-30 18:37:45 -04:00
d5abbd0d14
Allow overwriting existing symbols
...
This allows the workflow:
1) Edit symbol in schematic
2) Save As to original library
Also allows the user to quickly overwrite a symbol they don't want,
either by importing over the existing symbol or creating a new one.
2021-07-30 10:36:08 -07:00
c716548b29
Enable autoplace whenever sel contains at least 1 field owner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8886
2021-07-29 20:23:56 +01:00
539d14ce94
Fix hang-over from legacy canvas where we only looked at sel head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8886
2021-07-29 16:52:22 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
934b6e4cdc
Eeschema: fix symbol library link not showing
...
In wxWidgets GTK, SetLabel() won't show anything. Seems like an old
wxWidgets issue:
https://forums.wxwidgets.org/viewtopic.php?t=20207
2021-07-29 01:19:51 +00:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
87e4a1c672
Remove cover type; capitalize class name; make filename equal classname.
2021-07-28 22:16:38 +01:00
293f207356
Hopefully the last of the symbol id escaping issues.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-07-28 19:44:42 +01:00
f233f4a0a9
Expunge EDA_FILE_SELECTOR.
...
EDA_FILE_SELECTOR was just an obfuscation of wxFileSelector().
2021-07-28 14:12:51 -04:00
6d4c454e8c
Fix some more missing escaping for symbol ids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-07-28 18:37:09 +01:00
726f4d8016
Fix up some more cases of missing escaping for symbol names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-07-28 16:40:38 +01:00
19de38bbae
Avoid Mac-standard Cmd+H as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8864
2021-07-27 22:26:13 +01:00
2c766bdb2b
Eeschema: fix assigning netclass to buses
...
Buses with at least one member can use assign netclass functionality to
set all members to that netclass.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8743
2021-07-27 20:48:25 +00:00
dd5676f4bc
Implement a safer (RAII) tool re-entrancy guard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8873
2021-07-27 16:37:34 +01:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8ff76de18e
DIALOG_EDIT_ONE_FIELD: fix a non resizable widgets and fix a compil warning.
...
Fixes #8877
https://gitlab.com/kicad/code/kicad/issues/8877
2021-07-27 14:12:46 +02:00
8467fe5405
Altium schematic import: text positioning and arc fixes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8844 (power port text positioning, only use 0, 90deg for text)
Adjust text justification due to rotation on import
Set field position through SCH_FIELD::SetPosition
Honor hidden net names at power ports
Calculate start/end points for imported arcs in symbols
2021-07-26 19:49:56 +00:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
924d4563b7
Symbol Editor: Don't unselect library based on non-existent symbol
...
FIXED: Previously, when the symbol editor frame gains focus it will
unselect the library tree selection unconditionally. This is annoying
when adding a new library and then new symbol to a freshly-opened symbol
editor with no other symbol being edited. Anything that gives the editor
focus will deselect your library before you can add a symbol to it.
2021-07-25 21:37:08 +00:00
36b2ff262d
Symbol Editor: Auto select newly added/created library
...
CHANGED: When creating a new library, the usual intention is to add a
new symbol to it. Without this, the "No symbol library selected."
message will appear if the user attempts to add a new symbol without
manually selecting their new library.
2021-07-25 21:37:08 +00:00
13a03f77d3
Eeschema: Fix for delete key in wire tool
...
Delete key was not working for items selected with wire tool active.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8841
2021-07-25 15:17:49 -04:00
010247bb7f
Add overbar conversion to the legacy SCH reader.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8855
2021-07-25 13:11:30 +01:00
1aadf45947
DIALOG_SHIM: fix not working initial size when creating a dialog.
...
The first time a DIALOG_SHIM was created, with a given size, this size
was not taken in account. This this is now forced.
(when recreated during a session, this is the last dialog size that is used)
2021-07-24 18:59:28 +02:00
dbf17f83ed
Minor fixes (DIALOG_DISPLAY_HTML_TEXT_BASE: ensure min size is working).
2021-07-24 17:03:36 +02:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
9820e89268
EE_INSPECTION_TOOL::CheckSymbol(): fix incorrect test about pins on grid.
...
(the minimal grid was 25 internal units instead of 25 mils)
Also the coordinates in messages are now printed in current user units.
2021-07-23 18:23:25 +02:00
29eece7409
Move update-wires-if-driver-changed logic.
...
This prevents RecalculateConnections from getting called twice before
we run the logic. In that case the driver would change on the first
recalc, and then it would look like it didn't change on the second (which
is where we were checking).
Fixes https://gitlab.com/kicad/code/kicad/issues/8812
2021-07-23 16:45:26 +01:00
fa93c1ec65
Don't include hidden fields in bounding box.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8809
2021-07-22 13:56:09 +01:00
1a301d8eea
Stop using wxDialog::EndModal() from inside dialogs.
...
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
2021-07-21 17:38:14 -04:00
bff0307ac0
Edit pin number: fix a crash when a pin is common to all units (i.e. having a unit id = 0)
...
Fixes #8824
https://gitlab.com/kicad/code/kicad/issues/8824
2021-07-20 16:49:53 +02:00
8bacc9fccb
Fix python 'testing for equality' syntax
...
'Testing whether an object is 'None' using the == operator is inefficient and potentially incorrect.'
Per https://lgtm.com/projects/g/KiCad/kicad-source-mirror/?mode=tree&ruleFocus=7900090
2021-07-19 15:42:30 +00:00
4317848cfe
Only title-caps "our" field names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8803
2021-07-19 14:43:57 +01:00
f5aefb7ad9
User pointer compare, not object compare.
2021-07-19 13:17:12 +01:00
cb72da294a
More NULL expunging.
2021-07-16 16:13:41 -04:00
d1c9572bcc
Allow editing symbols when added to schematic
...
We do not allow editing symbols in Legacy libraries, but once they are
added to the schematic, they become editable
2021-07-16 12:08:57 -07:00
c794a6ce7a
Add pdb install option for msvc
2021-07-14 23:42:45 -04:00
395602b12a
Use Bind() instead of Connect() for simulator events
...
Also fixed "Settings..." menu item not starting settings. I don't know
why it's called `m_boardAdapter`.
2021-07-13 11:52:09 +00:00
c6a4f25538
Use wx events to update simulator title, start tools and menu items grayed out
2021-07-13 11:52:09 +00:00
3bafe6d6c9
Gray out unavailable simulator menu items, use wxUpdateUIEvent
2021-07-13 11:52:09 +00:00
4f2856b345
Gray out unavailable tools in simulator toolbar
...
Cures some of the dialogitis plaguing the simulator.
2021-07-13 11:52:09 +00:00
4f384085e2
Remove m_simulator null-check -- most of code already assumes it exists
2021-07-13 11:52:09 +00:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
4df3ba6a56
DIALOG_SPICE_MODEL: expand env var to open lib file selection dialog in the previous selected lib
2021-07-12 19:40:03 +02:00
0b4bb9378b
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8777
2021-07-12 11:59:07 +01:00
ad7e563e24
Do not translate something similar to a proper noun
2021-07-12 09:02:04 +02:00
759f0e9a75
Be sure to stop the timer during widget destruction
...
Also fix a comment elsewhere :D
Fixes #8772
2021-07-11 19:17:34 -04:00
5bd30232e8
Remove nag preventing setting shape to default line width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8774
2021-07-11 13:04:55 +01:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
2fc4ee5c5f
Upgrade "project is missing" to a warning.
2021-07-10 09:47:49 +01:00
a06b95bb1f
Even out spacing around various panels.
2021-07-09 23:42:45 +01:00
dffe2661e6
Fix SPICE simulator plot bug.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1944
2021-07-09 16:20:35 -04:00
928c4e8ed7
DIALOG_SPICE_MODEL: expand environment vars in spice library path.
2021-07-09 18:22:59 +02:00
f55f9a522b
Netlist exporter spice: expand env vars when used in include library name.
2021-07-09 14:22:31 +02:00
46701c1195
Don't allow undo record to get pushed during an undo.
...
When doing a schematic cleanup, for instance, we were breaking wires
and pushing undo records on to the stack. Needless to say, this was
pretty unexpected for the rest of the undo framework and caused all
kinds of mayhem (including crashes in some cases).
Fixes https://gitlab.com/kicad/code/kicad/issues/8704
2021-07-08 19:43:15 +01:00
a4263ebce5
Clean up Altium special string handling
...
1) Fix a couple of bugs in case processing
2) Make case processing more explicit to prevent more (1)
3) Move label processing to AltiumSpecialStringsToKiCadVariables
4) Strip double-quotes from special strings (and add test cases)
5) Change PROJECTNAME to just filename, not full path
6) PROJECTREV and REVISION are two different things
7) Add support for Altium's Application_BuildNumber
8) Fix some issues in trimming spaces around special strings
2021-07-08 15:34:38 +01:00
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
1c28ea0577
Do not create selection with simulator probe tool
2021-07-08 03:15:15 +00:00
3f165c70e1
Import more Alitum parameters.
...
ADDED CURRENT_DATE titleblock token (to go with existing ISSUE_DATE)
ADDED PROJECTNAME schematic token (to go with FILENAME and SHEETNAME)
Converts other parameters to project text variables.
2021-07-08 00:19:31 +01:00
c1db5dc0b1
Make the variable replacement table a little easier to read.
...
Yes, this probably violates all our formatting conventions EXCEPT
the one that says code should be easy to read/visually parse.
2021-07-07 22:06:35 +01:00
9351a88091
Variable references are case insensitive in Altium.
2021-07-07 22:04:00 +01:00
d51ac65349
Don't try to resolve variables before the schematic is set up.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8746
2021-07-07 22:04:00 +01:00
5a57f6ba98
Clear NEW flags after import.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8750
2021-07-07 20:05:50 +01:00
66eb2ddeb5
Remove auto when not needed for line length.
2021-07-07 20:05:50 +01:00
db91908c18
Add sheetpath instances when importing sheets from Altium.
2021-07-07 20:05:50 +01:00
a81c6b21b6
Formatting.
2021-07-07 20:05:50 +01:00
5e9a8e3488
altium: Improve handling of footprint references
...
Don't assume the implementation list index is always correct by order.
2021-07-07 21:03:21 +02:00
a17862d646
Import Altium harness labels as text.
...
One day we'll do better, but at least this way the user knows there's
something they need to migrate manually.
Fixes https://gitlab.com/kicad/code/kicad/issues/8748
2021-07-07 17:54:22 +01:00
5ab56e5320
More Altium importer error reporting cleanup.
...
1) Use REPORTER instead of wxLog
2) Use consistent, non-techy strings
3) Use consistent severity levels
Fixes https://gitlab.com/kicad/code/kicad/issues/8747
2021-07-07 12:43:33 +01:00
3b288b1b1b
Pull textframe processing out from under note and allow both.
...
Note that there's still a bunch of stuff we don't support regarding
textframes such as wordwrap and background colours, but this at least
keeps the text from getting lost.
Fixes https://gitlab.com/kicad/code/kicad/issues/8741
2021-07-06 20:27:28 +01:00
190b0ecdeb
Formatting.
2021-07-06 20:27:28 +01:00
9d348d7e6d
Coverity issue fixes.
2021-07-06 13:32:34 -04:00
0be91c5b7d
Import Altium footprint references into symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7751
2021-07-06 14:40:29 +01:00
3288971a7c
Allow titleblock vars to be resolved outside the titleblock.
...
Also implements some variable resolving for Altium imports.
2021-07-06 13:30:17 +01:00
43cce8b0b5
Remove automatic simulation start on simulator launch
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8644
2021-07-06 10:08:19 +00:00
6dfd655a7f
Save simulator checkbox settings in project file
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8450
2021-07-06 10:06:51 +00:00
b0c07a28b3
Add importing of Altium notes.
...
Import is incomplete because KiCad doesn't support text boxes yet
(so we can't do borders, word-wrap, background fills, etc.).
Fixes https://gitlab.com/kicad/code/kicad/issues/8734
2021-07-05 23:59:43 +01:00
f6aaaff81a
Smarten regex to include overbar, superscript and subscript.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8730
2021-07-05 20:26:05 +01:00
ea6769b702
The REPORTER interface is inherently line-based.
...
Also fixes a bunch of error messages that were similar but not
identical (which just increases translation burden).
Fixes https://gitlab.com/kicad/code/kicad/issues/8723
2021-07-05 13:41:06 +01:00
26df39e71a
Naming conventions.
2021-07-05 11:05:46 +01:00
6c161eec68
Autodetect plugin type when editing filename cell.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8687
2021-07-04 18:21:16 +01:00
8b2b3ca797
Define .wbk in wildcards_and_files.{cpp,h}, cosmetic code changes
2021-07-04 14:04:03 +00:00
df2d4966b1
Do not set dirty bit on simulator launch, remove dead code
2021-07-04 14:04:03 +00:00
9f1ecdd715
Give Spice simulator "Save As" option Shift+Ctrl+S shortcut key
2021-07-04 14:04:03 +00:00
87441e256c
Escape CR and LF in Spice simulation command when saved
2021-07-04 14:04:03 +00:00
bd1f3d85f4
Spice sim: Have more detailed error messages
2021-07-04 14:04:03 +00:00
86c7db46b9
If there is no project name, default workbook name shall be "noname.wbk"
2021-07-04 14:04:03 +00:00
28531a982d
Simulator: Use SIM_WORKBOOK in place of wxAuiNotebook
...
SIM_WORKBOOK is now a subclass of wxAuiNotebook, removing the problem of
having to maintain two separate workbook states.
2021-07-04 14:04:03 +00:00
cd0c8a5676
Make panel sim command only accessible from outside through workbook object
2021-07-04 14:04:03 +00:00
c11ee69499
Save 3D prefs after editing, and load some of them into FP Props.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8712
2021-07-04 13:20:55 +01:00
aa5902bd99
Process Altium pin name and number hidden flags.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7853
2021-07-04 00:18:42 +01:00
a5308e5f5c
Fix python console toggle to work across pcbnew/eeschema
2021-07-03 22:48:46 +00:00
fc96cb90f1
Fix validation of net names in eeschema
...
The SCH_NETNAME_VALIDATOR wasn't even being used because C++ is great
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1821
2021-07-03 17:25:29 -04:00
f46486bc3e
Naming conventions.
2021-07-03 21:43:57 +01:00
3aab37bd2a
Fix determinism issue when comparing a local and hierarchical label
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8406
2021-07-03 16:43:00 -04:00
8cbd754362
Preserve highlighted connection through a recalculation
2021-07-03 16:43:00 -04:00
5507230b9b
Minor dialog spacing issue.
2021-07-03 15:24:54 +01:00
3f6811f413
Minor dialog layout improvements.
2021-07-02 11:36:06 -04:00
eedd32177e
Fix a minor compil warning
2021-07-02 16:11:26 +02:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
d7271c9281
Unescape strings for display in symbol browser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-07-01 22:01:13 +01:00
04764c9224
Allow dragging of fields in symbol aliases.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8698
2021-07-01 21:03:53 +01:00
f8a34d98b3
Support for overbar syntax in Altium importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7979
2021-07-01 21:03:53 +01:00
dacb5f58e8
Default bus entries to default (0 width and transparent color).
...
Also adds some help text to the dialog so it's easier to figure out
what's going on.
Fixes https://gitlab.com/kicad/code/kicad/issues/8607
2021-07-01 15:43:19 +01:00
24e54178db
Make sure pin hittest regions don't get too hard to hit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8616
2021-07-01 15:43:19 +01:00
201c34345f
Fix sheet filename if it's missing extension.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8619
2021-07-01 15:43:19 +01:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
00504368d6
Better label for fieldname filter, and single undo for all sheets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8704
2021-06-30 18:45:18 +01:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
e695c580fd
Resolve textvar cross-references even if the field doesn't exist.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8701
2021-06-30 13:12:57 +01:00
2aa2493472
Resolve un-set template fieldnames to empty string.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8699
2021-06-30 13:12:57 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
b1b4caee6a
Escape "naughty" characters in symbol names.
...
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-06-30 13:12:57 +01:00
c07367821e
Fix compile error, and use more robust method of setting fonts.
2021-06-29 19:36:06 +01:00
0c2ac9a711
Move GUI font code to common.
...
This also allows the Mac fixes for font facenames to be more
compartmentalized.
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 18:27:58 +01:00
64f07ea9c6
Update text variables after changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8697
2021-06-29 13:55:06 +01:00
6c67dfa032
Improve eeschema colour preview zoom-to-fit a bit.
2021-06-29 01:08:26 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
e2a2c3282a
Update fields list when source or target lib IDs change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8263
2021-06-28 20:38:19 +01:00
d296bec5b8
Differentiate aSingleLine mode for SCINTILLA_TRICKS
...
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
2021-06-28 11:20:12 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
4c5df22eb0
Don't show busy cursor when dialogs (including progress) are in use.
...
Also removes a stale comment.
Also moves the progress reporters earlier to lessen need for busy cursor.
Also cleans up some error strings and makes other more easily translatable.
2021-06-26 22:53:24 +01:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
173c9a974c
Formatting.
2021-06-25 20:49:38 +01:00
27804e40e2
Go back to using space-width for tabs (instead of max-char-width).
...
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
2021-06-24 23:53:27 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
466536d509
Make sure hierarchy is up to date before checking duplicate sheet names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8654
2021-06-22 21:41:50 +01:00
a495a57602
Change syntax help for overbars to match syntax changes
2021-06-22 08:06:08 +00:00
6d223931fb
Convert overbar syntax in bus aliases.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8647
2021-06-21 20:13:21 +01:00
15d36456a9
Eeschema: Save annotation starting value in project settings
...
CHANGED: Added support for saving the starting value for annotation
Fixes https://gitlab.com/kicad/code/kicad/issues/8364
2021-06-21 10:19:09 +00:00
685ee31c35
Workaround a few more OSX printf problems.
...
Also regularizes the frame title processing.
Also fixes a type where the library name wasn't processed for
variable expansion.
Fixes https://gitlab.com/kicad/code/kicad/issues/7742
2021-06-20 22:48:19 +01:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
19f76ae77c
Convert pin names to new overbar format
...
Fixes bug 6 of https://gitlab.com/kicad/code/kicad/issues/8591 , thereby
closing the issue:
Fixes https://gitlab.com/kicad/code/kicad/issues/8591
2021-06-20 09:00:16 +00:00
430b8358ab
Fix comment
2021-06-19 14:32:55 +00:00
96e4b19444
Append Schematic Content -> Insert Schematic Content
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7905
2021-06-18 21:23:49 +01:00
d811ae0aa3
Improved ASCII art.
2021-06-18 12:01:16 +01:00
c35cceca62
fix compil warnings ( "multi-line comment" ) and missing override
2021-06-18 09:38:19 +02:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
389287e942
A bit more Part -> Symbol.
2021-06-17 22:24:41 +01:00
c0ad498c4a
Report all lib symbol issues.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7725
2021-06-17 22:24:41 +01:00
bdeeace2ab
More Eagle importer fixes.
...
1) Don't process wires more than once when looking for bus entries.
2) Don't allow processing a wire to mess up iteration over the RTree.
2021-06-17 18:16:38 +01:00
0484ca5564
Separate LIB_PIN and SCH_PIN GetShownName/Number processing.
...
SCH_PIN wasn't handling the legacy empty string token (~), but
more importantly this will allow text variable resolution specific
to the schematic.
Fixes https://gitlab.com/kicad/code/kicad/issues/8625
2021-06-17 10:52:46 +01:00
b10f156dd0
Don't convert overbar syntax in most fields.
...
You probably do want it in VALUE, but not REFERENCE, and certainly
not FOOTPRINT or DATASHEET. User fields are more likely to be
part numbers, etc. (and don't want conversion).
Fixes https://gitlab.com/kicad/code/kicad/issues/8617
2021-06-17 00:05:17 +01:00
1722bc03b0
Consistent terminology and punctuation.
2021-06-17 00:05:17 +01:00
c23c5b7f18
Allow import of Eagle schematics without libraries.
2021-06-16 22:02:50 +01:00
4b28bac89a
Fixes for Eagle importer.
...
1) Make sure we set an absolute path on the sheet.
2) Don't mix RTree iterators; wires get skipped between buses.
3) Implement a real ERC error so we don't assert.
Fixes https://gitlab.com/kicad/code/kicad/issues/7042
2021-06-16 21:44:18 +01:00
decfe89091
Refresh after import; don't wait for user to move mouse.
2021-06-16 21:44:18 +01:00
7953a5c62b
Work around MacOS printf/format issues
...
MacOS wxWidgets implementation of wxPrintf/Format suffers from some
issues when mixing string types. We avoid this by manually formatting
the string ourselves.
Fixes https://gitlab.com/kicad/code/kicad/issues/8404
2021-06-16 11:54:55 -07:00
27932883d9
Pass configured Python interpreter in to use for BOM plugins
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8594
2021-06-15 22:52:16 -04:00
21b869bd1f
Fix a few cases missed in the last merge.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7042
2021-06-16 00:01:28 +01:00
3a84ee27fd
First take at repairing Eagle import of bus entries.
...
Simplify logic by adding quadrant-based BUS_ENTRY ctor.
Fix issue with bus entry size having been in mils rather than IU.
Fix issues with logic.
Fixes https://gitlab.com/kicad/code/kicad/issues/7042
2021-06-15 23:23:47 +01:00
a895dc15f9
eeschema label edit dialog replaces '\r' occurances with '\n'.
2021-06-15 14:59:04 +00:00
ff099453c8
Rename class_library.[h|cpp] to symbol_library.[h|cpp].
2021-06-15 09:24:55 -04:00
ee3eac325d
Expunge the use of the word part from Eeschema code.
2021-06-15 08:32:11 -04:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
fb46cd8bc5
Expunge the use of the word component from Eeschema code.
...
The only exception to this is the SPICE simulator's use of component
when referring to physical component (R, L, C, etc.) values.
2021-06-14 14:00:21 -04:00
71c183d7bb
Rename LIB_PART to LIB_SYMBOL.
2021-06-14 07:11:17 -04:00
3763aca52c
Use getLineWidth() when drawing bus entries.
...
(Otherwise inheriting from the netclass or schematic doesn't work.)
Also fixes precedence order in GetPenWidth() for the two BUS_ENTRY
classes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8601
2021-06-13 20:52:03 +01:00
a386d44134
Fix typo fetching stroke width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8600
2021-06-13 20:31:53 +01:00
a1a48a4c42
Don't allow rotation/mirroring while dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8523
2021-06-13 20:22:25 +01:00
d9cb5a3015
Make sure text gets rotated, not just position.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7964
2021-06-13 20:22:25 +01:00
08d56f897c
Update Hierarchy Navigator after performing file actions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8498
2021-06-13 17:15:43 +01:00
bcdec0dea7
Move '~' pin name processing to LIB_PIN and SCH_PIN.
...
This will also allow us to do variable processing in the future if
desired.
2021-06-12 19:54:34 +01:00
ceb23c3aac
Don't display legacy placeholder for empty string ("~").
2021-06-12 18:58:15 +01:00
a297e8f202
Gerbview, export to pcbnew: use gr_circle instead of polygon for flashed round shapes
2021-06-12 09:26:36 +02:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
3d520ebe1e
Replace `~...~` overbar syntax with `~{...}`
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8134
Fixes https://gitlab.com/kicad/code/kicad/issues/4227
2021-06-11 18:40:57 +00:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
1c3df973d6
Coverity warnings fixes.
2021-06-10 13:45:02 +02:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
de95edb5ad
UI improvements for Manage Symbol Libraries.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8466
2021-06-09 19:20:51 +01:00
2c19fbd752
Remove a few unnecessary headers.
2021-06-09 12:28:03 -04:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
c854811ac4
Parent frame already includes undo_redo_container.h
2021-06-08 19:12:30 -04:00
ed0e0a00c0
Clear selection before importing schematic.
...
Also moves some error messages to use consistent terminology.
Fixes https://gitlab.com/kicad/code/kicad/issues/8421
2021-06-08 16:08:22 +01:00
9ebabb222c
Pass objects by reference instead of on the stack.
2021-06-08 10:09:38 -04:00
3a129a623a
Kick wx.h out of eeschema
2021-06-07 18:38:51 -04:00
8f2819cfa4
Kill the last of wx/wx.h in headers
2021-06-07 17:59:20 -04:00
022dd6072c
Add utility method to resolve symlinks
...
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
2021-06-07 20:59:59 +00:00
542c02046b
Write through symlinks for schematics and PCBs
2021-06-07 20:59:59 +00:00
b0e6bbb39c
eeschema: remove m_simCommand from SIM_WORKBOOK
2021-06-07 20:00:48 +00:00
917e329bdf
eeschema: remove TRACE_DESC from SIM_WORKBOOK
2021-06-07 20:00:48 +00:00
3ff670d2a4
Disable ACTIONS::openPreferences for now.
...
wxWidgets needs to move the item to the KiCad menu on Mac, and it
can only find it if it has the id wxID_PREFERENCES.
2021-06-07 20:51:45 +01:00
e91721cb62
Minor cleanup.
2021-06-07 20:51:45 +01:00
6cfc2755ed
Remove a useless "#include wx/wx.h" from wx_html_report_panel.h
2021-06-07 09:26:13 +02:00
33bbf85a3e
Use the parent frame GetSettings helper rather than including for Pgm()
2021-06-06 19:05:12 -04:00
f02d7ee593
Fix some (unexplained) issues with wxString::Printf on my build.
2021-06-06 19:01:23 +01:00
dc27079b71
cleanup tool event and tool action includes
2021-06-06 18:26:26 +01:00
fcb21038cb
Reduce some eda_item.h usage in headers
2021-06-06 11:09:06 -04:00
ad111a513d
Remove eda_itemf rom sch_view.h
2021-06-06 11:09:06 -04:00
c337f747b8
DIALOG_PIN_PROPERTIES does not need wx/msgdlg
2021-06-06 09:36:04 -04:00
fc3cea2cca
Remove wx/xml/xml.h from sch_eagle_plugin.h
2021-06-06 09:34:57 -04:00
7fa6e13c48
Remove xnode.h from netlist_exporter_xml.h
2021-06-06 09:32:36 -04:00
c9a660a80c
Rework JSON integration to speed up build
2021-06-05 17:08:38 -04:00
06e967354f
Fix symlink read-/write-through code
...
Use `realpath(3)` instead of `readlink(3)`, which offers support for
relative and absolute symlinks alike, since all symbolic links will be
resolved to the absolute path of the linked-to file.
Fixes #8082
2021-06-05 14:22:50 +00:00
9ffa2955b7
Fix drag of bus wire creating net wires
2021-06-03 22:29:04 -04:00
b1c9083743
Remove the wx/docview.h include
2021-06-03 18:42:08 -04:00
4e94b1fe86
Remove the universal sockets include
2021-06-03 17:59:46 -04:00
7c14e4e967
Common widget header housekeeping.
2021-06-03 12:02:45 -04:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
7faee5eda5
Stop salt the eart with wxhtml.h
2021-06-03 07:49:49 -04:00
b5b76eedf7
Avoid sharing gdicmn for just bitmaps
2021-06-03 01:46:04 -04:00
3ab69939f9
Remove wx.h from many files
2021-06-03 02:19:20 +01:00
af2707929d
Don't leak a wx header via eda_item.h
...
Turns out this provided the translation header globally :D
2021-06-02 19:18:48 -04:00
6919d12c70
Eeschema, Spice simulator: use Ctrl+letter as accelerator keys.
...
Using only a letter can conflict with widgets accepting letters to enter data.
Fixes #8537
https://gitlab.com/kicad/code/kicad/issues/8537
2021-06-02 19:45:30 +02:00
f03ca3259e
Remove unused Boost code/includes
2021-06-02 18:39:43 +01:00
eeb405c196
Cleanup some more excess math/util includes
2021-06-02 00:50:46 -04:00
5f581aa6ad
Move some LABEL_SPIN_STYLE to the cpp to add back warnings
2021-06-02 00:26:16 -04:00
9effeb1fcb
Don't crash if an invalid bus connection is made
...
Certain situations can trigger the stale cleanup being run
on a bus that doesn't actually contain the stated member.
In this case we should just keep calm and carry on -- who knows
what netlist will be generated, but we shouldn't crash.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8530
2021-06-01 21:49:25 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
c7d188a8d0
Centralizing SCRIPTING class
2021-06-01 20:18:24 +00:00
f274a00c08
Remove PYTHON_* compile options
2021-06-01 20:18:24 +00:00
33c0bb78fd
Use file absolute path when determining title bar indicators
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8449
2021-06-01 17:03:20 +00:00
cc5b3f1a2f
Always check simulator netlist options
...
Before the simulation netlist checkboxes were considered only when
changing the simulation type
2021-06-01 12:42:45 +00:00
d84fcd89f1
bom html python scripts: enhancements
2021-05-31 18:54:36 +02:00
54fbcbac36
BOM python plugins: restrict changes made in commit 35f9cd26 to Windows.
2021-05-31 17:06:23 +02:00
c4cabb38d5
More worksheet -> drawing sheet cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8516
2021-05-31 12:26:44 +01:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
1be2c8cc40
More trouble with the IS_MOVED flag.
...
We moved it earlier because AddItemToScreenAndUndoList() was clearing
it, but it needs to be set for AddItemToScreenAndUndoList() too.
Fixes https://gitlab.com/kicad/code/kicad/issues/8289
2021-05-31 12:26:44 +01:00
35f9cd2634
BOM python plugins: fix some issues related to python2/3 and utf-8 chars.
2021-05-31 10:03:53 +02:00
1b94534451
Revert "Use lambdas to fix paste conditions"
...
This reverts commit 65c7c77c3d
2021-05-30 21:25:42 -04:00
3ac5aa5369
enum class SHEET_SIDE
2021-05-30 21:23:46 -04:00
65c7c77c3d
Use lambdas to fix paste conditions
...
`SELECTION_CONDITIONS::Idle && ` was evaluating as always true because this was referencing the function pointer
2021-05-30 20:37:16 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
a60183ec32
netlist xml: fix missing space between UUIDs for multi-units symbols (trial 2).
...
Fixes #8509
https://gitlab.com/kicad/code/kicad/issues/8509
2021-05-30 11:23:14 +02:00
71f40bd67c
Revert a change made in commit acb024f6, because it breaks the .net netlist format.
2021-05-30 08:37:13 +02:00
acb024f622
netlist exporter xml: fix missing space between UUIDs for multi-units symbols.
...
(similar to the .net netlist)
kicad_netlist_reader.py: fix compatibility with V6 xml netlist :
"tstamp" keyword is now "tstamps" keyword.
Fixes #8509
https://gitlab.com/kicad/code/kicad/issues/8509
2021-05-29 18:29:02 +02:00
81c7fb61f8
Sub-menu "Preferences..." in main menu "Preferences": fix not working accelerator key.
...
Accelerator keys are disable in our WX_MENUBAR. A common ACTION_MENU is used and
"Preferences..." is now shown in Hotkeys list.
2021-05-29 18:09:49 +02:00
37c31196f4
Eeschema, importFile: build the HTML report messages before displaying the dialog.
...
Fixes #8507
https://gitlab.com/kicad/code/kicad/issues/8507
2021-05-29 10:23:11 +02:00
be5b281501
Cleanup RAD2DEG and unused vars
2021-05-28 12:37:57 -07:00
f47784cd14
Fixup Junctions should call common tool
2021-05-28 12:35:38 -07:00
3fa8795f26
Fix crash in LIBEDIT when editing pins
...
Units in library items start at 1. 0 is reserved for "all units".
Previous code was requesting an out of range index due to an assumption
that units start at 0.
2021-05-28 20:13:11 +01:00
9a9c9d38e8
CADSTAR Schematic: Cleanup pins in symbols
...
In CADSTAR pins are single points. We can replicate the original look
of the schematic in most cases by searching the symbol for straight
segments that are coincident with the pin and use those to calculate
a suitable pin length and angle.
2021-05-28 20:13:11 +01:00
29d1b84939
CADSTAR Schematic: Fix positioning of symbol attributes
...
Symbol attributes were being placed at the wrong location
due to incorrect relative angle calculation
2021-05-28 20:13:10 +01:00
8d788b7a09
CADSTAR Schematic: Fix assert regarding sheet absolute path
2021-05-28 20:13:10 +01:00
63f56640db
CADSTAR Schematic: Add needed junctions on load
...
Fixes a bug that was causing junctions to disappear when they
were not perfectly positioned in the original CADSTAR design.
2021-05-28 20:13:10 +01:00
b985c4d2e9
CADSTAR Schematic: Handle scaled symbols
...
Create a new LIB_PART for scaled symbols. These will be then embedded
into the schematic file. However when "update from library" is done,
it will revert to the unscaled symbol.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8494
2021-05-28 20:13:10 +01:00
752ae4d519
Rename modification flag routines
...
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
2021-05-28 12:07:04 -07:00
d7f219e98f
Unify IsSave and IsModify
...
The flags and calls were used identically, leading to potential
confusion/bugs. Testing for modification should go through
IsContentModified()
2021-05-28 11:51:54 -07:00
40b96c8388
Netlisters: do not remove unconnected pins from netlists needing all pins.
...
Fixes #8499
https://gitlab.com/kicad/code/kicad/issues/8499
2021-05-28 10:09:33 +02:00
fdcc49d3ee
Eeschema: fix saving hierarchical sheets in stand alone mode.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8209
2021-05-27 16:01:36 -04:00
9fcd847238
Eeschema: allow sheet file paths outside the project to be relative.
2021-05-27 14:48:22 -04:00
bd72f7a054
DIALOG_PIN_PROPERTIES: shows the pin connect point, like in symbol editor.
...
(See commit 2817c)
2021-05-27 20:45:45 +02:00
b1572dd56b
Eeschema: fix broken sheet paths when adding existing schematic.
...
All existing sheet schematic file paths were completely trashed when adding
a new sheet from an existing file outside of the project path.
2021-05-27 14:04:56 -04:00
2817c3b3de
Always show pin dangling symbols in Symbol Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8493
2021-05-27 17:50:21 +01:00
42eae27551
Rebuild selection after heavy lifting.
...
Undo does some fairly major redraws (including setting the current
screen), all of which drop the selection and cancel interactive tools.
Make sure the selection is re-built *after* all those run.
Fixes https://gitlab.com/kicad/code/kicad/issues/8492
2021-05-27 14:25:37 +01:00
64cd401bdb
Delete Tool: Fix missing "Item Locked" popup
...
Fixes problem identified in https://gitlab.com/kicad/code/kicad/-/issues/8392
Removes same popup from schematic tool because SCH_ITEM can not be locked
2021-05-27 05:38:51 +00:00
71b3ab432c
Eeschema: fix broken sheet name edit control validator.
2021-05-26 15:26:48 -04:00
3d0fe8e2c6
Only initialize VALIDATOR if we're using it.
...
It appears to get called by the wxWidgets framework sometimes even
when invisible/unenabled.
Fixes https://gitlab.com/kicad/code/kicad/issues/8483
2021-05-26 12:39:33 +01:00
db900fe526
Eeschema: fix broken schematic edit control validators.
...
Sheet file names can have ':', '\', and '/' characters depending on the
platform so don't exclude them. Warn the user when any platform specific
paths are used about the platform capability issues rather than outright
prevent them from being used which prevents absolute paths from being used
even when they are desired by the user.
Fix broken validator behavior when excluded characters are not white space
characters only.
2021-05-25 14:10:29 -04:00
45ba067642
Update SCH_SCREENs RTree after placing new symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8451
2021-05-25 15:10:10 +01:00
be436ec977
Remove whitespace from page numbers on load and use # if page is empty
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8350
2021-05-21 22:52:47 +01:00
Jon Evans
Mikolaj Wielgus
Wayne Stambaugh
Sylwester Kocjan
Seth Hillbrand
jean-pierre charras
Jeff Young
Stefan
david-beinder
Mike Williams
luz paz
Marek Roszko
Thomas Pointhuber
Roberto Fernandez Bautista
RigoLigoRLC
PJM
Jakob Haufe
Michal Schulz
luz paz
Johannes Maibaum
Ian McInerney
Giulio Girardi