Commit Graph

195 Commits

Author SHA1 Message Date
jean-pierre charras 8e2d82ebdb bitmap2component: minor enhancements and fixes. 2019-04-01 12:51:27 +02:00
Seth Hillbrand f96d16eba3 Restore LINK_MAP linker options
Removing invalid TO_LINKER missed a few segments where it was used.
This fixes the ability to enable link maps
2019-03-16 20:37:14 -07:00
Seth Hillbrand 5cfa37da09 bitmap2component: Handle mask/alpha
Use alpha and mask components of bitmaps to set boundaries for the image
tracing.

Fixes: lp:1815216
* https://bugs.launchpad.net/kicad/+bug/1815216
2019-02-09 08:40:59 -08:00
John Beard e6a6266f3d Build: libpolygon provides its own includes
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.

As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.

This resolves a circular dependency previously detected and also
simplifies CMakeLists.
2019-02-04 19:29:31 -08:00
John Beard bb2ae8e13b Bitmaps: move bitmap defs to bitmaps library
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.

Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.

This avoids a circular dependency that was previously reported
by static analysis.

Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)

Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
2019-02-04 19:29:31 -08:00
Maciej Suminski 24f9bfa13b Fixed memory leaks
This is commit a9efbf47 with a fix for SWIG to deal with unique_ptr.
2018-12-20 10:05:58 +01:00
Seth Hillbrand e307d9318b Revert "Fixed memory leaks"
This reverts commit a9efbf4716.

The commit broke compiles with scripting
2018-12-11 10:12:44 -08:00
Maciej Suminski a9efbf4716 Fixed memory leaks 2018-12-11 16:21:43 +01:00
Maciej Suminski 766156ed87 Fix for dark mode on macOS Mojave
Thanks to Scott Rapson and Justace Clutter for the solution.

Fixes: lp:1797989
* https://bugs.launchpad.net/kicad/+bug/1797989
2018-12-07 09:03:56 +01:00
jean-pierre charras 3e5cd86288 Fix a few wxWidgets minor asserts. Fix a compil warning 2018-07-28 10:31:04 +02:00
Jeff Young 49ea6e1670 Fix occurrences of "edition" which should be "editing"
Fixes: lp:1778168
* https://bugs.launchpad.net/kicad/+bug/1778168

(cherry picked from commit bcb1220)
2018-07-17 15:12:39 +01:00
Seth Hillbrand bc7bd107d9 Fix a number of untranslated strings. 2018-06-12 17:05:25 -07:00
Seth Hillbrand f2f1ce232d Standardize colons in bitmap2component dialog 2018-04-23 13:09:22 -07:00
Jon Evans 5b653c0c1e Update MacOS icons
Fixes: lp:1750284
* https://bugs.launchpad.net/kicad/+bug/1750284
2018-03-22 11:45:42 -04:00
Michael Kavanagh fabbc48b40 macOS: standardise CFBundleName to application names. 2018-03-05 01:14:00 +00:00
jean-pierre charras bc6763e14d bitmap2cmp_gui: fix incorrect initialization of m_Negative when starting bitmap2cmp. 2018-02-20 14:08:25 +01:00
Jeff Young 702eb48ca0 Fix issues with Bitmap2Component positive/negative radio buttons.
Cleaned up the UI a bit and removed the radio buttons (Negative
is now a checkbox).

Fixes: lp:1744043
* https://bugs.launchpad.net/kicad/+bug/1744043
2018-02-20 13:26:10 +01:00
Jeff Young 12247db467 Enable Bmp2Component Export button when loaded from argv
Fixes: lp:1608813
* https://bugs.launchpad.net/kicad/+bug/1608813
2018-02-18 17:47:26 -05:00
jean-pierre charras 5d72aebd22 Fix code after renaming files 2018-01-29 16:40:22 +01:00
Simon Richter a9ccf1161b Fix quotes in UI messages
This replaces all single and angle bracket quotes in UI messages with
double quotes, for consistency.

Sorry to all translators.
2017-12-15 07:33:07 -05:00
Wayne Stambaugh 652b969193 GTK+ file dialog wildcard improvements.
The GTK+ file dialog is case sensitive however it does support regular
expressions.  Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.

A note to developers: make sure to add a file extension when setting
when setting the default file argument.  If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.

There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.

Fixes lp:1720542

https://bugs.launchpad.net/kicad/+bug/1720542
2017-11-11 19:32:26 -05:00
Tomasz Włostowski 32185ddcd3 Multiple improvements concerning colors, configuration handling and legacy features in pcbnew:
- support for background color setting
    - removed several global config settings (such as g_Drc_On)
    - wrapped most of global config settings in PCB_GENERAL_SETTINGS class
    - reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
    - new GAL feature for legacy users: double-click (or E) to change track width available as an option.

Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543

Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
2017-08-04 16:06:57 +02:00
jean-pierre charras 11dcb76fc9 Add -Wshadow compil option, if exists to warn about shadowed variables.
Swig auto generated .cxx file has a lot of shadowed variables, so this option cannot be used to compil all files.
2017-02-23 13:17:23 +01:00
Jon Evans a52250a91e Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas.  When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
Simon Richter ad088db6d2 Add more "override" markers. 2016-09-25 13:59:41 -04:00
Simon Richter 59c81976dc Explicitly mark overriding functions. 2016-09-24 14:53:15 -04:00
Simon Richter 715eddf68b Code cleanup: remove dead code, add comment. 2016-06-08 08:32:01 +02:00
Simon Richter dca358076e Make sure KIFACE_GETTER linkage is consistent
This makes sure that the declaration is always the same within a single
module, so all users have the same idea of whether the symbol is imported.

In all dynamically linked objects, all users should be aware that the
symbol is imported, while in the statically linked bitmap2component
program, no import/export decorations should be used.
2016-05-28 13:10:06 -04:00
Simon Richter 23e8c3ebf3 Executable icon resource build configuration fixes.
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
  and is being ignored. Bitmap2component does not have an icon resource on
  Windows.  Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
  declaration for the resource file so added them.
2016-01-28 11:53:24 -05:00
Simon Wells 24d293ab8d bmp2cmp: include cleanup 2016-01-15 19:57:52 -05:00
jean-pierre charras 178cf0dc25 Polygon calculation (zones filling): use fast mode when possible (in fact most of time) and strictly simple polygon option only in critical cases (in fact in plot Gerber functions mainly).
In polygon calculations (combining polygons, fracture) the mode of calculation (fast or strictly simple polygon option) as no more a default value, because choosing the best mode is better to optimize the calculation time.
2015-12-15 21:21:25 +01:00
Simon Wells 96918d4a8a Changed the bundle identifier to org.kicad-pcb.<app> to follow the kicad domain name 2015-10-30 08:43:04 +13:00
Wayne Stambaugh a6a9d8eedf Default and most recently used path fixes. (fixes: 1494210)
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir().  This fixes the windows issue
  where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView.  Setting the CWD
  has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress.  Do not expect every path and/or file selection dialog to properly
  update the most recently used path.  The correct solution to this problem requires a much more
  well though out solution which will not happen until after the next stable release.
2015-09-25 15:38:09 -04:00
Jean-Pierre Charras 81e2f2e22e boost::polygon from bitmap2component 2015-07-27 21:48:17 +02:00
jean-pierre charras f0a52644ea Pcbnew: fix Bug #1413701 (Segfault on highlight "unconnected" net 0 in Pcbnew ). Also, remove now useless code and other very minor fixes. 2015-01-23 12:24:32 +01:00
unknown 8876fdf4af Misc minor fixes (Fix some minor compil warnings). 2015-01-18 12:49:32 +01:00
jean-pierre charras 1ebaf1371a Fix remark 1 in Bug #1393277 (the option "use absolute paths" acts reversed: ticked exports relative paths, unticked exports absolute paths) 2014-11-17 14:55:26 +01:00
unknown b411b240f2 bitmap2component: Add a layer selection to export a logo for Pcbnew from a Cirilo Bernardo's patch.
Apply patch from Cirilo Bernardo with some minor changes: mainly allows also the solder mask layer and keep ref and value fields on the silk layer.
2014-11-12 17:59:12 +01:00
Bernhard Stegmaier a4c59e6b97 More OSX build fixes.
* Many path related fixes.
* Fix execution of external applications.
* Update mac-osx.txt.
* Add top-level links for standalone applications inside OSX bundle.
* Fix document icons for Eeschema and pl_editor.
* Create individual bundles for standalone applications inside the main application bundle.
* Add usual 'site-packages' to python path in OSX bundle.
* Fix name of OSX bundle plugin folder.
2014-10-16 18:13:01 -04:00
Bernhard Stegmaier 8b3c14c08b OSX build improvements.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
2014-10-02 19:03:52 -04:00
Moses McKnight 6da5e2cdd0 Configuration file consolidation patch from Moses McKnight.
* Create GetNewConfig() and GetKicadConfigPath() to unify configuration file
  creation and location.
* Move Windows configuration out of the registry into configuration files.
* Move Linux configuration files from $HOME to $HOME/.config/kicad to eliminate
  configuration file pollution in the users $HOME folder.
* Fix a bug in the configuration file where the Eeschema hot keys are saved.
2014-09-05 17:12:38 -04:00
jean-pierre charras a26449b3ef 3d-viewer: code cleaning; bitmap2component: minor fix and code cleanup 2014-08-22 12:24:14 +02:00
unknown eec819a274 Bitmap2component: old .emp output format removed (patch from Cirilo Bernardo) 2014-08-21 16:57:25 +02:00
Dick Hollenbeck 4578ea8b9e 1) Add 32 Cu Layers.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
   The old Cu stack required knowing the count of Cu layers to make
   sense of the layer number when converting to many exported file types.
   The new Cu stack is more commonly used, although ours still gives
   B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
   meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
   can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
   You will need to convert to the format immediately, *.kicad_pcb and
   *.kicad_mod (=pretty) since legacy format was never going to know
   about 32 Cu layers and additional technical layers and the reversed Cu
   stack.
2014-06-24 11:17:18 -05:00
Dick Hollenbeck 991926d320 Modular-Kicad milestone B), major portions:
*) Rework the set language support, simplify it by using KIWAY.  Now any major
   frame with a "change language" menu can change the language for all KIWAY_PLAYERs
   in the whole KIWAY.  Multiple KIWAYs are not supported yet.

*) Simplify "modal wxFrame" support, and add that support exclusively to
   KIWAY_PLAYER where it is inherited by all derivatives.  The function
   KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.

*) Remove the requirements and assumptions that the wxFrame hierarchy always
   had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
   and editors. This is no longer the case, nor required.

*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
   KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
   quickly.  It also gives control to the KIWAY as to frame hierarchical
   relationships.

*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
   the single KIWAY_PLAYER, see bullet immediately above.

*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
   gives the KIFACEs a chance to save their final configuration dope to disk.

*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
   these modal frames are distinctly different than their non-modal equivalents.
   KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
   so this is another important reason for having a dedicated FRAME_T for each
   modal wxFrame.

On balance, more lines were deleted than were added to achieve all this.
2014-05-03 12:40:19 -05:00
Dick Hollenbeck 5f65d0da93 *) Add KIFACE_I::StartFlags() and IsSingle() so a KIFACE implementation can know
if it is running under single_top.cpp or under a project manager.

*)  Test Kiface().IsSingle() when adding menus, some operations are not permitted
    when running under a project manager and the KIWAY_PLAYER is pegged to a
    specific project.

*)  Implemented KIWAY::KiFACE() so it loads *.kiface files.  They still have to be
    in the same directory as the main *.exe launcher, so this presents some difficulty
    when the binaries are not yet installed but rather the *.kiface files are still
    in their original build directories.  For today, I simply copied _pcbnew.kiface
    to build/kicad/.

*)  Add a test case to kicad/mainframe.cpp just to get an early peek at loading
    _pcbnew.kiface under the C++ project manager.  Got that working for one
    specific invocation just for proof of concept.  Surprise, it works.
2014-04-17 21:05:40 -05:00
Dick Hollenbeck 6bfff89fe5 merge tip in, resolve. 2014-03-20 01:24:33 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
jean-pierre charras 91c53a947a bitmap2component: add management of image resolution: Is read from file, when exists, and can be modified in bitmap2component.
It also fix issue #747631
2014-03-16 15:10:42 +01:00
jean-pierre charras fd2afec6f5 Remove some fully outdated code (#pragma, from Henner Zeller's report, and some other things) 2014-02-18 12:41:53 +01:00
Dick Hollenbeck 4f26386e8d Initial KIWAY (modular-kicad) work. Various tweeks. 2014-02-03 09:10:37 -06:00
jean-pierre charras 6181e9e46e Bitmap2component: fix Bug #1273082 (patch from Wesley Dungan) 2014-01-27 18:22:49 +01:00
Marco Serantoni 4d139b590f [MacOSX] Adding better support for Retina Display (NSHighResolutionCapable) 2013-12-31 12:03:02 +01:00
jean-pierre charras 3b423cb12d Pcbnew fix Bug #1192203 (I hope ...)
Bitmap2component: add export for .kicad_mod new footprint file format, and export polygon descr for page layout description (.kicad_wks file)
2013-06-18 19:27:47 +02:00
Dick Hollenbeck 8ccf0320b4 1) Add "rules" to base of tree for copying into BZR_HOME/rules.
File "rules" has instructional text as comments near top.

2) Convert all text files in repo to LF line ending form.
   Any checkout done with "rules" in play will convert the working
   tree to native line ending, while keeping repo as LF line ending.
2013-05-25 23:36:44 -05:00
Lorenzo Marcantonio 204d085b64 More cleanup on layer code usage
Better description for entities on right click menu and panel
Typo fixes and some comment reformats
2013-04-07 13:55:18 +02:00
Lorenzo Marcantonio 9fd79dfa91 Implemented the LAYER_NUM typedef (LAYER was already taken as a class name...) to represent a layer number. 2013-03-31 15:27:46 +02:00
marco. 0355119044 [MacOSX] Updated Icons - Document ones still missing :( 2012-09-27 19:20:44 +02:00
Dick Hollenbeck 210a7036db switch all <math.h> includes to <cmath> includes on an attempt to dodge some abiguous references to atan2() 2012-09-21 12:02:54 -05:00
jean-pierre charras 1f277fd66d Remove Kbool from Kicad. Use Clipper instead. 2012-08-04 11:43:27 +02:00
Wayne Stambaugh bed96be750 Internal unit improvements and Pcbnew s-expression file format changes.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO  class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
2012-04-12 17:31:31 -04:00
jean-pierre charras 8f62c6aa05 Move AddMenuItem inline functions outside wxstruct.h in a new file (menu_helpers.h)
Enhancements in AddMenuItem (that accepts now a menu type)
Partial use of the Edwin van den Oetelaar's patch (patch not fully working or correct)
2012-04-09 11:16:47 +02:00
jean-pierre charras d739f03c5f Remove old xpm icons files 2012-04-07 13:09:57 +02:00
Wayne Stambaugh d7feb9ab45 Initial Pcbnew s-expression file format commit.
* Add s-expression Format() function to all objects derived from
  BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
  (nanometers) to millimeter string for writing to s-expression
  file.
* Add temporary dummy conversion functions to prevent link errors
  until schematic and board object and action code can be separated
  into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
  units.
2012-04-01 16:51:56 -04:00
jean-pierre charras ed5585eb6c Libedit: fix bug (svg export does not work)
other minor fixes.
2012-03-06 15:08:59 +01:00
Dick Hollenbeck b8a0ab4c52 switch to <> for includes from "" per conversation with Jean-Pierre and Wayne, adjust search paths 2012-01-22 22:33:36 -06:00
Dick Hollenbeck cc097762c7 Temporarily reverse out the evolving support for finer Board Internal Units (BIU)s. 2011-11-24 11:32:51 -06:00
Vladimir Ur 09a61396ba Some code restyling: VECTOR_PCB is an array. Cleanup uncontrolled definitions of abs, max, etc. max is now overloaded function and MAX is a macro. 2011-11-15 22:26:06 +04:00
Dick Hollenbeck 9f69193a62 formatting and compiler warnings 2011-11-01 03:06:33 -05:00
jean-pierre charras 2476bc7f62 bitmap2component: code cleanup. 2011-10-26 13:06:04 +02:00
jean-pierre charras 51a845470b bitmap2component: use BOOST:POLYGON instead of KBool, and minor enhancements. 2011-10-26 11:53:42 +02:00
jean-pierre charras 4cbcf56cee remove useless USE_BOOST_POLYGON_LIBRARY cmake option, and remove unused files.
BOOST POLYGON is always used in zone filling functions.
Kbool is still in use in other calculations.
2011-10-25 18:24:56 +02:00
jean-pierre charras 1c412879d5 New icons: fix problems about .ico files (under Window)
Remove or move old .ico and .pgn files and add new icons (.ico files and .png files) in bitmaps_png/icons and bitmaps_xpm/icons
.png files and .ico are used to build desktop shortcuts
Handle variable size bitmaps in kicad.
2011-09-10 19:48:35 +02:00
jean-pierre charras 3b381cf8cf Remove *.ico files and used only xpm or new pgn bitmaps for icons under Window.
Fix minor other issues.
Remove unused files.
2011-09-09 21:30:59 +02:00
Wayne Stambaugh ebc7259a91 Rename WinEDA_App class to EDA_APP and remove redundant includes. 2011-09-06 10:09:40 -04:00
Andrey Fedorushkov 2b45335749 bitmap2component: fix localize GUI, fix *nix native string 2011-08-16 22:32:56 +04:00
jean-pierre charras 84572d371d Pcbnew: fix bug I recently created: footprint lib incorrectly saved (first module can be lost) 2011-07-08 09:12:28 +02:00
Marco Serantoni 916f80f1b4 Adding artwork from Jerry Jacobs for bitmap2component 2010-12-27 15:41:20 +01:00
Marco Serantoni a6c6041266 OSX: Fixes making bitmap2compoenent work. 2010-12-27 15:01:52 +01:00
jean-pierre charras 384fc5724e Cosmetic enhancements. Eeschema: in libedit the Value Field is n more editable in the field editor dialog (due to recent changes in library code) 2010-12-04 13:56:19 +01:00
Dick Hollenbeck 636b2d301e function comments, fix ones in *.cpp files until they can be deleted if they exist in the headers 2010-11-12 10:36:43 -06:00
Wayne Stambaugh fc0864befa Schematic component library object code cleaning and refactoring.
* Break classes_body_item.cpp(.h) into more reasonable size bites.
* Rename classes_body_item.cpp(.h) to lib_draw_item.cpp(.h)
* Fix some unsatisfied header file dependencies.
* Add stubs to component library draw item base classe to handle editing
  internally.
* Lots of code cleaning.
2010-10-08 16:40:57 -04:00
jean-pierre charras 90621bef00 Updated boost to version 1.34
Added boost::polygon (experimental)
Added experimental zone fill calculations with boost::polygon
Added patches from Yury Khalyavin
2010-07-26 19:06:36 +02:00
jean-pierre charras 052876079a fixed bug 603481. Better bitmap2component look. fixed some locate problems for footprints using polygons (mainly created by bitmap2component) 2010-07-11 18:24:44 +02:00
jean-pierre charras af7c26e8be bitmap2component minor enhancements 2010-06-25 21:02:39 +02:00
jean-pierre charras 000085792c minor enhancement 2010-06-21 18:15:05 +02:00
jean-pierre charras 7d2ff522c1 give an icon to bitmapt2component frame 2010-06-20 20:04:29 +02:00
jean-pierre charras 9cf56261b6 give an icon to bitmapt2component frame 2010-06-20 16:47:30 +02:00
jean-pierre charras 1ab68d8fb8 fixed very minor things. 2010-06-19 12:58:50 +02:00
jean-pierre charras 63e7ecae59 fix bitmap2component compil issue under Linux 2010-06-15 22:17:33 +02:00
jean-pierre charras 65a585b5d9 bitmap2component: better user interface (using wxWidgets) and more bitmaps file format import 2010-06-15 20:45:22 +02:00
jean-pierre charras 5ecb22b51d bitmap2component: better user interface (using wxWidgets) and more bitmaps file format import 2010-06-15 20:27:41 +02:00
jean-pierre charras 02b88a7016 Use bin/plugins/ as install path for bitmap2component instead of bin/ 2010-06-12 09:24:14 +02:00
Dick Hollenbeck 658ff6051f fix warnings 2010-06-11 23:46:34 -05:00
jean-pierre charras ac11d86c2f Added an experimental tool to create logos from .bmp bitmaps. Added Potrace library to convert bitmaps to polygons 2010-06-10 20:43:12 +02:00