Adds maximum step size setting used by transient analysis solver,
and 'use initial conditions (uic)' setting. Enabling uic disables
DC operating point analysis and may introduce singularities. It requires
a careful selection of initial conditions of circuit elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/2515
Previously, bus elements that were not instantiated as individual nets
could not connect to each other. This caused issues for complex
schematics where busses needed to connect to other busses with elements
that resolved to the same net names. Functionally, this means mixing
bus elements, which we will replace with first-class elements in version
8 but currently can only be accomplished either by using bus aliases and
this patch or by individually instantiating each bus element as a
local label
Fixes https://gitlab.com/kicad/code/kicad/issues/14300
Move the internal columns and rebuild the table when a user moves the
columns. This is the only way to fix selection issues across reordered
columns.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12295
Qty column can now be hidden.
We eventually need to get to the point that we are able to rearrange the
columns in the internal data model to work around wxGrid selection
issues.
The simulator has advanced considerably, and it is seeing lots of active
development, so make it a required part of KiCad. Additionally, the
build without the simulator has actually been broken for a while, so no
one clearly is building without ngspice right now.
1) More REPORTER, less exception processing
2) Remove UI calls from SPICE_MODEL
3) Don't replace netlist with errors; show both
4) Don't bail out of netlist generation after single error
Fixes https://gitlab.com/kicad/code/kicad/issues/14295
The list of candidates (names) must be restricted to existing global labels
and symbols creating a global net name: power symbols having only one power
input pin (a power output does not create net name).
Fixes#14319https://gitlab.com/kicad/code/kicad/issues/14319
Also makes the strings match the GUI better so people will know where
to find them later.
And fixes a couple of ERC items that referred to Board Setup (oops).
Don't assume the dialog is mode-less and call Destroy() from within a
dialog method. This will most assuredly crash if the dialog is shown
modally or quasi-modally.
Don't leak memory for mode-less dialogs created on the stack. Make sure
when the parent frame window is closed that all mode-less dialog memory
is cleaned up. Dialogs are not child windows like controls and toolbars
so their memory does not automatically get cleaned up when the parent
window is destroyed.
Do not directly access frame parent window's pointer in dialog destructors.
Apparently the tear down order when destroying mode-less dialogs is not
guaranteed so the parent window may get deleted before the dialog causing
a crash when accessing the parent window pointer from the dialog dtor.
Do not close mode-less dialogs in the parent frame's destructor. This
doesn't guarantee that the dialog(s) will be destroyed before the parent
but it may reduce some careless mode-less dialog event handling in the
future.
- Avoid repetition and errors from typos
- Allow simple changes
- Simpler data type handling, the constants are wxString
(Cherry-picked from f135881bd6 in 7.0)
Note that the PCB editor's propGrid doesn't seem to need this workaround,
but I haven't yet figured out what's different between it and the sim model
propGrid.
Fixes https://gitlab.com/kicad/code/kicad/issues/13852
This adds Reset() method to KIFACE to reload global libs stored in
global static vars.
Also refactors some lib reload code in various frames to have
common MAIL_RELOAD_LIB handler.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12500
Create() is done without execption processing, while ReadDataFields
should have exception processing.
(This also fixes a case where exception processing on ReadDataFields
was missing.)
Also fixes a bug where the pinSelect menu wasn't checked for -1 before
fetching.
Fixes https://gitlab.com/kicad/code/kicad/issues/13856
Also fixes a bug so that voltages, currents and power dissipations are
only probed if the flag is set -- this keeps ngspice from throwing an
error if you probe something twice (for instance, if you have .probe
commands in text and turn off the auto-probing).
Remove some useless spacers, and do not force some widgets to have a to
large size (by removing empty areas).
Work in progress: one panel is still too big.
Rather than update library symbols one at a time, queue them up by
schematic symbol to prevent multiple updates to the same symbol in
complex hierarchies. This also removes all of the library symbols
first which will clear out all of the library symbol variants that
were created by modifying library symbols in place and/or changes to
the symbol in the library.
Don't add new variant library symbol if an equivalent variant already
exists in the schematic local cache. This prevents duplicate library
symbols from being added to the local cache when the first variant in
the cache does not match that of the symbol being added.
Fixes#10926
Contains the following changes:
- Adds a new ERC_SCH_PIN_CONTEXT class which is used to provide deterministic
comparison between items causing ERC violations (e.g. pins) when associated
with a SCH_SHEET_PATH context.
- Adds association of SCH_SHEET_PATHs for ERC_ITEMs and the sub-schematic items
which caused an ERC violation. This allows correct display of markers on the
sheets of interest only, and allows correct naming resolution and cross-probing
from the ERC dialog.
- Adds a new ERC_TREE_MODEL class, derived from RC_TREE_MODEL, which correctly
resolves component references across heirarchical sheets using the associated
SCH_SHEET_PATHs. This allows sheet-specific component references to be displayed
correctly in the ERC results tree.
- Updates SCH_MARKER to only draw sheet-specific markers on the sheet causing
an ERC violation.
- Increments the schematic file version.
- When loading a schematic with legacy ERC exclusions, discards those of type
ERCE_PIN_TO_PIN_WARNING, ERCE_PIN_TO_PIN_ERROR, ERCE_HIERACHICAL_LABEL, and
ERCE_DIFFERENT_UNIT_NET as there is no safe way to automatically infer the
information which is now stored with these exclusions (sheet paths for error
location and related items). Requiring users to (once) re-add exclusions is
preferable to silently incorrectly matching new ERC issues to legacy exclusions.
The pressure relief valve was not useful for common work patterns as it
forced the recalculation on many common actions such as bus expansion.
This caused it to actually feel slower than with the pressure relief
valve off.
For most schematics, realtime is now fast enough to not need the valve
and for those that are extremely complex, removing the valve helps this
run more predictably
This iterated over all pins to find the pin after a given item. Because
out pattern is consistently to iterate in the outer loop, this means
that we were an O(n^2) loop for the pins just to find their names. This
affected very large parts (e.g. FPGAs) when switching sheets to display
EDA_ITEMs are responsible for giving their parent a crack at it if
they failed to resolve it. This recurses all the way up to the schematic/
board, and then to the project.
Cross-reference handling is also move to the EDA_ITEMs. It must be done
before bubbling up so that we don't end up in loops. (The aDepth parameter
will break the loop, but without having done anything useful.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
We only need to parse the libraries for the Sim Model Editor dialog
(so that we can determine the models to put in the popup). Doing it
for netlisting just opens us up to incorrectly parsing the SPICE, and
returns no value.
This also means that a SIM_LIB_MGR manages a single library, and
never multiple libraries.
This also allows the tidying-up of some error reporting structures to
better inform the user what went wrong.
Fixes https://gitlab.com/kicad/code/kicad/issues/13431
1) Always honour the dialog checkbox value.
2) Don't expect the absence of the primary parameter in Sim.Params to
mean that Value stores it. It might be the default parameter value.
3) Update spiceTypeInfo when matching legacy data to an internal model.
4) Initialize the store-in-value checkbox depending on whether or not
we found the primary parameter in the Value field.
This moves some stuff to REPORTER APIs. Moving more stuff would be good,
but it probably too high-risk at present. We'll wait for 8.0 for that....
Fixes https://gitlab.com/kicad/code/kicad/issues/13359
Also improves some terminology for english-speakers.
Also substitues [] vector access (which creates empty elements) over
at() (which throws if the item is not found).
The whole edit dialog is blocked while dragging if anything else is drag
selected, and if nothing is drag selected the rotations/mirroring will
be fine. Also, we already allow mirror and rotate while dragging, using
the keyboard shortcuts and menu items, and it works fine.
This is mainly for simulation testing where the dialog has to be
grown every time you restart the app, but it might as well be applied
to the similar dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12887
1) Use C-locale when converting output of parsers to strings.
2) InferSimModel() must run on local copy of fields, not the fields in
the symbol (which might be different if they've already been edited in
the Symbol Properties Dialog, for instance).
3) InferSimModel() should accept a deviceType already set to RLC.
4) Don't output trailing decimal separators if there's no fraction.
It appears the dialog had already been updated to remove it from the
formbuilder project and the cpp file, but the header wasn't checked in
at the same time.
onParamGridChanged was firing before CommitPendingChanges which meant
the edited value didn't get saved if the editor was still open when
OK was clicked.
1) Finish removing pin-count based APIs. We need to know the pin names
as well, not just the count.
2) Fix a bug in the regexp for SPICE functions to allow both lowercase
and uppercase function names
3) Move CreatePins() overrides to the new API so that we get pins on
raw SPICE models.
Fixes https://gitlab.com/kicad/code/kicad/issues/13190
Also fixes various bugs if symbols contained non-indexed pin numbers.
We really need to know the actual pin names when creating models, rather
than just assuming 1, 2... etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/13183
The paged book initialization (and others) can generate events,
re-laying out the whole dialog multiple times during initialization.
This halts events during the layout period
Fixes https://gitlab.com/kicad/code/kicad/issues/13158
1) if a legacy model references a library then we need to see if said
libraray exists and read model from it if so
2) legacy node ordering is by index, not pin name
3) we can't auto-generate a pin map when we don't know the pin names,
so don't try
Also adds simulation model inference to Symbol Editor's Simulation Model
Editor, and adds write-back from both Simulation Model Editors to their
parent Symbol Fields Editor dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12505
This is probably a good rule of thumb to prevent any event ordering
issues between platforms or unhandled events being trigger during
inherited object destruction.
Also removes a bunch of std::string stuff from the file handling in the
simulator. All our file handling, env variable expansion, project path,
etc. stuff is wxString based, and jumping through std::string in between
just makes it more complex and increases the potential bug surface.
Also fixes a bug where you'd get two error messages when a spice model
library wasn't found.
Also fixes a bug where you'd get a spice model library not found error
when the text field was empty.
Also fixes a bug where we'd try to absolutize a path starting with an
unresolved text or environment variable. If the path starts with a
variable it's probably absolute, and tacking on the project path in the
error message just obfuscates things.
Fixes https://gitlab.com/kicad/code/kicad/issues/13082
Also moves passive RLC inference out from migration to just-in-time
creation for the simulator or netlisting.
Also fixes a version guard mismatch because the spice migration was
done inside UpdateSymbolInstances (which has its own version guard).
Also changed UpdateSymbolInstances to UpdateSymbolInstanceData so
someone else in the future doesn't think it's a general-purpose symbol
instance updater.
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
1) Fix <TAB> processing
2) Don't hide/show controls where possible
3) Use a more concrete reference to primary parameter in Save to Value
checkbox
4) Move Save to Value checkbox into model section
Fixes#13062Fixes#13056Fixes#13057
However, DXF and HPGL is not perfect, but OTOH this is not an usual format for schematic.
PS format is not tested for now.
Reports a warning (by default) for missing units
Reports an error for missing units with power input pins
Reports a warning for missing units with input pins
Reports a warning for missing units with bidi pins
Fixes https://gitlab.com/kicad/code/kicad/issues/1922
Load the library from the path if enter is pressed or focus is lost if
the library exists. If a library under the same path as previously is
to be loaded this way, don't do anything.
Fixes https://gitlab.com/kicad/code/kicad/issues/12970
Jeff Young
Okan Demir
Ian McInerney
jean-pierre charras
Seth Hillbrand
Mike Williams
Wayne Stambaugh
Ian McInerney
Roberto Fernandez Bautista
Salvador E. Tropea
Jon Evans
Chris Morgan
Fabien Corona
Marek Roszko
qu1ck
Paweł Płóciennik
aris-kimi
Alex
vinsfortunato
JamesJCode
Gary Kim
Graham Keeth
Mikolaj Wielgus