Commit Graph

57 Commits

Author SHA1 Message Date
Wayne Stambaugh bf00ebee3b Header clean up round 1. 2020-12-18 09:04:26 -05:00
Jeff Young 3b35bfc0a5 Don't write out synthetic severities (they're headings).
Fixes https://gitlab.com/kicad/code/kicad/issues/6726
2020-12-14 13:34:53 +00:00
Jeff Young e09271ca0e Fixes for hole clearance and hole-to-hole tests.
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
   hole-to-hole checks.  We were checking the items being put into the
   DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.

Fixes https://gitlab.com/kicad/code/kicad/issues/6546

Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
jean-pierre charras a431fd99ca Fix crash when converting a Eagle board to a Kicad board.
During conversion a illegal layer number was used without filtering
2020-11-17 10:23:44 +01:00
Jeff Young 61bca4aaa4 A bit of "module" erradication, nameing conventions, and formatting. 2020-11-14 21:21:54 +00:00
Jeff Young f5443de7f9 D_PAD -> PAD. 2020-11-13 15:16:24 +00:00
Jeff Young 84dd5108ba Remove some "class_" prefixes from files. 2020-11-13 15:16:23 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
Jeff Young 32dffd27ab Add silk clearance to board setup constraints. 2020-10-12 18:31:00 +01:00
Jeff Young 614d452f12 Resolve trackwidth[0]/viasize[0] to be the netclass values.
If we don't have a netclass use the default netclass.

Fixes https://gitlab.com/kicad/code/kicad/issues/5957
2020-10-11 00:54:49 +01:00
Jeff Young 04c4012ee6 Make track/via sizes UI more predictable and compatible with DRC.
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules.  They're also now dependent
on the layer being routed as well as the start object.

Also make the controls adjust to each other better.  For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.

Fixes https://gitlab.com/kicad/code/kicad/issues/5951
2020-10-10 19:32:30 +01:00
Jon Evans 728c207105 Deduplicate settings migration handling 2020-10-05 23:21:57 -04:00
Jeff Young f340636f70 When knocking out higher-priority zone use fill, not outline.
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.

Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.

Fixes https://gitlab.com/kicad/code/kicad/issues/5583
2020-09-18 16:45:41 +01:00
Jeff Young e2e229da96 Finish exorcising the old DRC system.
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
Jon Evans 3940e20fcb Expose extension offset and zero suppression settings 2020-09-12 11:52:59 -04:00
Jon Evans 0e9997d9ca Add new dimension features to board design defaults 2020-09-11 21:12:36 -04:00
Jon Evans ae7877c6cb Migrate dimension precision 2020-09-11 21:12:36 -04:00
Jon Evans b11e315d10 Refactor DIMENSION to hide internal details; add some new properties
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.

The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
2020-09-11 21:12:36 -04:00
Jeff Young d1006138fd ADDED holeWallPlatingThickness to AdvancedCfg.
Used for zone filling and DRC hole collision testing.  Allows us to
calculate the actual hole size from the finish hole size.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
Jeff Young 38e9217d54 Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
Jeff Young 305abb210f Add a mode to allow zone smoothing to produce external fillets.
Fixes https://gitlab.com/kicad/code/kicad/issues/5306
2020-08-30 15:20:59 +01:00
jean-pierre charras df4226f896 Settings management: try to fix full filename issues when using non ASCII7 chars.
The fix convert all std::string storing a path to wxString (unicode support)
wxString were already used at many place to store paths, but not all.
For internal calculations mixing char strings and wide char strings is a recipe
for bug: any missing conversion between UTF8 and wxString breaks paths.
2020-08-02 21:31:03 +02:00
Jeff Young 095937563b Hook libeval compiler up to rule parser
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
  board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
  don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
2020-07-20 22:11:53 +01:00
Jeff Young 741481591e NetClass settings for Eeschema.
ADDED Eeschema-specific netclass settings including wire and bus
thickness, color, and line style.

Netclasses override individual wire & bus colors and line styles.
If that proves an issue we might look at something more sophisticated
with inheritance.

Fixes https://gitlab.com/kicad/code/kicad/issues/4581
2020-07-08 21:23:25 +01:00
Jon Evans db4502e2ae Add copy ctor for BOARD_DESIGN_SETTINGS
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4817
2020-07-06 12:45:57 -04:00
Jon Evans a9e97848dd Fix use after free on BOARD_DESIGN_SETTINGS
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4792
2020-07-03 19:13:06 -04:00
Jon Evans c0aa6965de Migrate PcbNew project settings to new framework
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.

ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects

Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
2020-07-02 22:08:54 -04:00
jean-pierre charras 27c80e8a2e Solder mask clearance default value: set default to 0, taking advice from
both Ucamco and Eurocircuits.
Update message in plot dialog about best solder mask clearance value.
Show warning in plot dialog if these values are no 0.
2020-06-07 11:10:28 +02:00
Jeff Young f4d8c30f9a Tighten DRC epsilon value until we decide what to do about it. 2020-06-04 18:28:48 +01:00
Jeff Young 416d82727f Redo DRC rules to get ready for new system. 2020-05-25 22:51:47 +01:00
Jeff Young 05855a5a1c Performance enhancements for DRC. 2020-05-18 13:38:17 +01:00
Jeff Young d3f017d825 DRC rules parser and engine.
Fixes https://gitlab.com/kicad/code/kicad/issues/2182

Fixes https://gitlab.com/kicad/code/kicad/issues/2116

Fixes https://gitlab.com/kicad/code/kicad/issues/1958

Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
Jeff Young 74ee143d45 Add via annulus minimum. 2020-05-11 22:56:09 +01:00
Jeff Young 3c3984a6fc Generalize default footprint fields.
Fixes https://gitlab.com/kicad/code/kicad/issues/2289
2020-05-08 23:30:33 +01:00
Jeff Young e0da677d4d Add min clearance to DRC; rename Min Via Drill to Min Through Hole.
Also fixes a crash bug when ignoring a DRC violoation with multiple
markers.

Fixes https://gitlab.com/kicad/code/kicad/issues/2528
2020-05-04 22:08:36 +01:00
Jeff Young 10614a9ebc Implement changes for Sketch Pads to Fab Layers.
Includes adding Fab Layers to default text & graphic settings.

Fixes https://gitlab.com/kicad/code/kicad/issues/1885

Fixes https://gitlab.com/kicad/code/kicad/issues/2274
2020-05-01 18:49:42 +01:00
jean-pierre charras 741783c6d1 Pcbnew: Set default solder mask min size to 0.
When the solder mask min size is > 0, pads are no longer flashed or regions items.
Good Gerber files need pads flashed or regions items.

Non 0 solder mask min size is reserved to special cases (home made PCBs for instance)
2020-03-12 20:05:08 +01:00
Jeff Young 85c2e0d23a Add user-defined severities, exclusions and colors to DRC markers.
Exclusions are currently persisted in the project file.

Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
Seth Hillbrand 8c19b4b6ae pcbnew: Adding arcs to PNS
This is allows ARCs in tracks to be synchronized with
the PNS router.  Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
Jon Evans e59a3d981e Implement a new settings framework across all of KiCad
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme

Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
2020-02-19 23:44:56 -05:00
Jeff Young 836c1ea56e Fix a bunch of un-caught boost::bad_pointer exceptions.
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.

Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
2020-01-12 19:55:00 +00:00
Seth Hillbrand 7c28c3838a Comment-only changes
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
Mark Roszko 19ceb11ae7 Change more enums over to scoped enums 2019-12-28 00:55:11 +00:00
Jeff Young 1c153c55c0 Add default units and precision for new dimension objects.
Fixes: lp:1846376
* https://bugs.launchpad.net/kicad/+bug/1846376
2019-11-05 17:22:51 +00:00
jean-pierre charras c1eee56785 Prepare changes to support a better board stack management in .gbrjob file.
In .gbrjob file, one can specify the thickness and color of some layers.
Currently, there is no way to enter these parameters.
This commit prepare a better support of .gbrjob files.
2019-06-25 18:39:11 +02:00
jean-pierre charras e75be4074e Pcbnew: finalize the new zone filling algo (filled polygons with no thickness). 2019-06-05 18:36:20 +02:00
jean-pierre charras 34ccd0f004 Pcbnew: prepare the new zone filling algo (filled polygons with no thickness). Work in progress. 2019-06-04 09:39:17 +02:00
Seth Hillbrand 6bcf1839b7 pcbnew: Add arc approximation setting to board
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments.  This allows the user to customize their speed vs. accuracy
tradeoff.  The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
2019-05-24 21:21:06 -07:00
Jeff Young 1ae47b6069 Implement a copper-to-edge-clearance setting.
For legacy boards, the setting is picked up from the board outline
thickness.  If the board outline has mixed thicknesses, then the
max is used and a warning is displayed.

Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
2019-04-05 22:18:44 +01:00
Jeff Young ebb74fcc2b Honour diff-pair dimension changes while routing. 2018-09-18 20:37:00 +01:00