As long as the arc angle stays below <60°, it will automatically choose between
clockwise and counter clockwise. This allows the user to choose the direction
with a simple mouse movement.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
When drawing an arc, show a guide circle that indicates the
radius of the arc at the current cursor. This can be useful
as a guide for seeing where the arc will reach once the radius
is fixed by the second click.
Fixes lp:1796158
* https://bugs.launchpad.net/kicad/+bug/1796158
A only one char is very hard to translate outside a context, so avoid to use it.
Remove also 2 "FIX ME" lines, now useless.
Fixes: lp:1817354
https://bugs.launchpad.net/kicad/+bug/1817354
Some MSW seem to have issues with the UTF-8 characters in const
wxString. This explictly casts to wxString from UTF-8 handling the
platform differences
Fixes: lp:1813329
* https://bugs.launchpad.net/kicad/+bug/1813329
When creating the zone cutout, we delete the old zone and add a new one
with each cutout. This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.
Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
Graphic lines and polygons are drawn to fit specific areas for which it
is helpful to have the endpoint controlled by the cursor even when
constraining the angle.
Fixes: lp:1805502
* https://bugs.launchpad.net/kicad/+bug/1805502
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
Independent drawing functions (that don't expect any particular state to
be set up fo them) on the GAL need to reset the GAL properties they
use. This adds GAL::ResetTextAttributes() to make this easier.
This is important, as failing to reset mirroring can cause asserts in
OpenGL.
This is used in the Ruler tool (which previously did it one attribute at
a time) and also the Arc layout assistant, which previously failed to
reset mirroring.
Also reset on GAL construction, as these members appear to be
uninitialised.
This is required as the OpenGL GAL doesn't support mirrored
text, and if the state is not cleared after painting other mirrored
text, this is what is attempted.
Fixes: lp:1677210
* https://bugs.launchpad.net/kicad/+bug/1677210
The zone creation in DRAWING_TOOL was a complex event loop whici
simultaneously managed the event handling, construction of the preview
polygon and the creation and commiting of the zone, all in the same
scope. This has been broken into several pieces:
* POLYGON_ITEM preview item, used to preview the polygon in progress
* POLYGON_GEOM_MANAGER is a class that collects points from user input
and used them to describe a polygon's geometry, including calculation
of 45-degree constrained leader lines
* ZONE_CREATE_HELPER is a class which deals with creating zones based on
geometry from a geometry manager and parameters from the DRAWING_TOOL
* The (much simpler) event loop in DRAWING_TOOL drives the
POLYGON_GEOM_MANAGER. With a minor refactor, this loop can be reused
in future for other polygonal tools if wanted.
The polygon preview now has a translucent fill which makes it easier to
visualise the zone.
This also adds the Close Zone Outline and Delete Last Corner actions as
part of the new event loop.
Fixes: lp:1663885
* https://bugs.launchpad.net/kicad/+bug/1663885
Fixes: lp:1667885
* https://bugs.launchpad.net/kicad/+bug/1667885
This uses the two-point geometry manager to split the logic of the ruler
geometry and the preview item display. This allows the ruler to use that
manager's angle snap feature.
This adds the microwave tools to GAL in Pcbnew as a new tool:
MICROWAVE_TOOL.
Some new preview items are introduced to support this:
* TWO_POINT_GEOM_MANAGER for managing construction of two-point
geometries, such as that used to construct the inductor.
* CENTRELINE_RECT_ITEM a preview item to draw ractangle with a given
aspect ratio along a line (specified using a TWO_POINT_GEOM_MANAGER)
PCB_TOOL gets a generic event loops which should be useful for more
than just microwave tools:
* doInteractiveItemPlacement() - handles event loops that wait for a
click, create an item on click and then allow moving it
around/flipping, etc.
Fixes: lp:1531323
* https://bugs.launchpad.net/kicad/+bug/1531323
This adds a richer overlay to the arc-by-three-points tool in Pcbnew,
including more guide-lines and a live display of radius and angle.
Also included is ability to go back to the previous step (if setting end
angle, you can go back to setting start point, etc) using Backspace, and
Ctrl snaps the start/end angles to 45 degree multiples.
This adds new classes
* MULTISTEP_GEOM_MANAGER: represents a generic "geometry manager" that
builds up some geometrical construction based on a sequence of points.
Used by:
* ARC_GEOM_MANAGER: handles the logical flow of constructing an
arc by centre-point, set radius, set angle. This moves the logic out
of the Pcbnew DRAWING_TOOL event loop in drawArc().
* ARC_ASSISTANT: graphical overlay to communicate current arc shape to
the user during the drawing process
This allows to measure between features on a PCB. It uses a preview
EDA_ITEM in common, but due to the use of the IDs, it's currently
Pcbnew/Modedit only.
This also adds several "utils" for graphical functons useful when
drawing preview items on GAL canvases.
Fixes: lp:1467313
* https://bugs.launchpad.net/kicad/+bug/1467313
This simplifies the (already simple) SELECTION_AREA class. It is also
moved into KIGFX::PREVIEW and put in the common library, where it can be
reused by other GAL-aware tools (not just in Pcbnew) in future.
This introduces SIMPLE_OVERLAT_ITEM, which is an abstract EDA_ITEM,
designed for use as an overlay for assisting interactive tools.
The item is drawn only on the GP_OVERLAY layer, and sets the fill,
stroke and line properties before calling a virtual function to draw the
shape, which will depend on the implementaiton of the derived class.
The motivation here is to simplify and unify basic overlays used when
in interactive tools. It is not designed to be the base class of all
possible overlays - more complex ones would be more clearly represented
as their own derivative of EDA_ITEM.
Applications of this class can include: zoom/select rectangles, zone
polygon previews, geometric shape helpers, and so on.
Jon Evans
Jeff Young
Thomas Pointhuber
Seth Hillbrand
jean-pierre charras
Ian McInerney
Mark Roszko
Seth Hillbrand
John Beard
Tomasz Włostowski
Oliver
Andrzej Wolski
Maciej Suminski