Commit Graph

171 Commits

Author SHA1 Message Date
Maciej Suminski 6d7a7a3233 KICAD_SPICE CMake flag 2016-08-11 14:42:13 +02:00
Maciej Suminski 92a3e405c2 Tuner tool. 2016-08-11 14:41:45 +02:00
Maciej Suminski ae5424c44a Probe cursor (TODO: has to be discussed) 2016-08-11 14:41:12 +02:00
Maciej Suminski ac17165947 Initial version of simulator probe tool 2016-08-11 14:41:11 +02:00
Chris Pavlina 8c01318141 Add zoom-to-selection tool 2016-06-08 07:19:53 -04:00
jean-pierre charras 1e0a72df0b Eeschema: fix a minor issue: when deleting a connection, the screen was not always redrawn, and the deleted objects were still shown, until the next screen redraw. 2016-05-20 10:09:08 +02:00
Chris Pavlina 5ff3bbb96e eeschema: move part by a point on the grid (lp:1563587) 2016-03-30 14:19:32 -04:00
jean-pierre charras bc699c8d8f Rework on class EDA_TEXT and related classes and draw functions. More work. Eechema: in rotate texts: redraw the full screen to avoid garbage on screen. 2016-03-23 13:16:27 +01:00
Wayne Stambaugh b7e56ae1cb Eeschema: SCH_SHEET_PATH refactor.
* Derive SCH_SHEET_PATH from std::vector< SCH_SHEET* > and remove unnecessary
  assignment operator and list management functions.
* Remove function BuildSheetPathInfoFromSheetPathValue() since it was
  effectively an assignment operation.
* Replace all calls to BuildSheetPathInfoFromSheetPathValue() with assignment
  operator.
* Replace list management functions with vector management functions.
* Fix a error message that wasn't translatable.
2016-02-27 14:35:45 -05:00
Wayne Stambaugh 306b964b40 Eeschema: decouple SCH_SCREEN::TestDanglingEnds() from wxDC and EDA_DRAW_PANEL.
* Remove wxDC and EDA_DRAW_PANEL as parameters from function
  SCH_SCREEN::TestDanglingEnds().
* Change SCH_SCREEN::TestDanglingEnds() to return the connection change state
  rather than the dangling end status which wasn't used anywhere.
* Update all calls to SCH_SCREEN::TestDanglingEnds() to remove wxDC and
  EDA_DRAW_PANEL parameters and refresh connection indicators only if a
  connection state change occurred.
2016-02-19 10:41:32 -05:00
Wayne Stambaugh 7b5823185a Undo commit -r 6535. 2016-02-15 15:12:42 -05:00
Wayne Stambaugh 0ef1eee2c6 Eeschema: move recursion check from SCH_SHEET_PATH to SCH_SHEET.
* Add const and non-const version of GetRootSheet() to SCH_SHEET.
* Add GetSheetPaths() function to SCH_SHEET which behaves the same way
  as SCH_SHEET_LIST except it uses standard C++ containers and is a much
  simpler design.
2016-02-02 19:45:43 -05:00
Chris Pavlina fc22580d9a Eeschema: replace accidental dynamic_casts with static_casts
Coverity: 134084, 134805, 134086, 134087
2016-01-09 18:36:09 -05:00
Chris Pavlina 50c418a332 Eeschema: add field automatic placement feature. 2015-12-13 11:56:47 -05:00
Chris Pavlina a2beb2ecad Eeschema: remove assertion in OnOrient() when the current object cannot be oriented. 2015-09-15 09:51:47 -04:00
jean-pierre charras fa55c0f18e Minor fix (minor bug #148296) and very minor change. 2015-08-09 17:04:49 +02:00
jean-pierre charras 9b9c7945a2 Many minor fixes (like bug #1477213). Better help in dialog environment variables editor (the tooltip was never shown on Windows) 2015-07-24 12:23:34 +02:00
jean-pierre charras c291b88608 Eeschema: fix dangling ends when enter the first time in a sub sheet of a schematic hierarchy. Minor code cleanup. 2015-07-11 09:37:52 +02:00
jean-pierre charras 66aa22c1db Eeschema: remove an unused argument in a few functions.
Fix also the  minor Bug #1469504.
2015-06-28 18:45:05 +02:00
jean-pierre charras 7be1d32a10 Fix minor issues (included Bug #1469358 hierarchical sheet pin not redrawn after edition) 2015-06-27 11:12:32 +02:00
Wayne Stambaugh 4cd392a6ae Add backspace hot key to Eeschema to leave current sheet. 2015-06-12 17:31:44 -04:00
Wayne Stambaugh 54bad8b5e8 Fix Eeschema sheet recursion bugs.
* Add code to test for sheet path recursion to SCH_SHEET_PATH and SCH_SHEET_LIST.
* Add recursion tests to edit sheet code in Eeschema.
* Add recursion tests to block paste code in Eeschema.
2015-06-07 16:31:55 -04:00
jean-pierre charras 82dff76530 Eeschema: fix minor bugs #1450107 and #1450104 (assertion failures, only visible in Debug mode) 2015-04-30 13:08:35 +02:00
jean-pierre charras 3084c0aa0b Eeschema: add missing rotate and mirror sheet in sheet context menu (these transforms were possible in block commands, but not from the sheet menu).
Fix a i18n issue in field names when loading a component, if the language was changed during a session, and kicad not restarted (see Bug #1448654).
However changing the language needs restarting kicad, in order to have all messages or menus translated.
2015-04-26 18:32:16 +02:00
unknown b3b791961a coverity common folder fixes (mainly not initialized members). 2015-03-11 17:04:20 +01:00
jean-pierre charras 00f8994ee1 Eeschema: Fix a (minor but annoying) bug detected by coverity which prevent Eeschema to draw components in "fast mode" (i;e. without pin texts) when they are moved, due to a draw parameter which was incorrectly used.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
2015-02-28 17:56:09 +01:00
jean-pierre charras c6f4f15926 Eeschema: Minor code reorganization:
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed  #include
2015-02-21 10:46:44 +01:00
Dick Hollenbeck 7e483f69bd Modular KiCad Blueprint Milestone B), major portions:
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
     get disassociated from their true PROJECT.
  *) Allow loading eeschema library editor from kicad.exe
  *) Allow loading pcbnew library editor from kicad.exe
  *) Rename LIB_COMPONENT to LIB_PART.
  *) Add class PART_LIBS, and PART_LIB.
  *) Make PART_LIBS non-global, i.e. PROJECT specific.
  *) Implement "data on demand" for PART_LIBS
  *) Implement "data on demand" for schematic SEARCH_STACK.
  *) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
  *) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
     a weak pointer.
  *) Remove all chdir() calls so projects don't need to be CWD.
  *) Romove APPEND support from OpenProjectFiles().
  *) Make OpenProjectFiles() robust, even for creating new projects.
  *) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
     and save them in the .eeschema config file, not in the project file.
  *) Fix bug with wxDir() while accessing protected dirs in kicad.exe
  *) Consolidate template copying into PROJECT class, not in kicad.exe source.
  *) Generally untangle eeschema, making its libraries not global but rather
     held in the PROJECT.
2014-08-13 15:28:54 -05:00
Dick Hollenbeck 3aa390b57a WTF 2014-07-30 21:56:25 -05:00
jean-pierre charras 1540368422 Minor fixes and changes:
Remove a minor warning message in Debug mode for 2 dialogs.
Pcbnew: update Gerber X2 file format (File Attribute) to very last X2 specification
Eeschema: Fix a minor bug in block selection (sometimes the last selected component was select instead of items in selected area)
and better drag behavior when draging an item by the drag hotkey.
2014-07-29 18:38:27 +02:00
Dick Hollenbeck 991926d320 Modular-Kicad milestone B), major portions:
*) Rework the set language support, simplify it by using KIWAY.  Now any major
   frame with a "change language" menu can change the language for all KIWAY_PLAYERs
   in the whole KIWAY.  Multiple KIWAYs are not supported yet.

*) Simplify "modal wxFrame" support, and add that support exclusively to
   KIWAY_PLAYER where it is inherited by all derivatives.  The function
   KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.

*) Remove the requirements and assumptions that the wxFrame hierarchy always
   had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
   and editors. This is no longer the case, nor required.

*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
   KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
   quickly.  It also gives control to the KIWAY as to frame hierarchical
   relationships.

*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
   the single KIWAY_PLAYER, see bullet immediately above.

*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
   gives the KIFACEs a chance to save their final configuration dope to disk.

*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
   these modal frames are distinctly different than their non-modal equivalents.
   KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
   so this is another important reason for having a dedicated FRAME_T for each
   modal wxFrame.

On balance, more lines were deleted than were added to achieve all this.
2014-05-03 12:40:19 -05:00
Dick Hollenbeck 6bfff89fe5 merge tip in, resolve. 2014-03-20 01:24:33 -05:00
Dick Hollenbeck 2c67c3ff80 * KIWAY Milestone A): Make major modules into DLL/DSOs.
!   The initial testing of this commit should be done using a Debug build so that
    all the wxASSERT()s are enabled.  Also, be sure and keep enabled the
    USE_KIWAY_DLLs option.  The tree won't likely build without it.  Turning it
    off is senseless anyways.  If you want stable code, go back to a prior version,
    the one tagged with "stable".

*   Relocate all functionality out of the wxApp derivative into more finely
    targeted purposes:
    a) DLL/DSO specific
    b) PROJECT specific
    c) EXE or process specific
    d) configuration file specific data
    e) configuration file manipulations functions.

    All of this functionality was blended into an extremely large wxApp derivative
    and that was incompatible with the desire to support multiple concurrently
    loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
    An amazing amount of organization come from simply sorting each bit of
    functionality into the proper box.

*   Switch to wxConfigBase from wxConfig everywhere except instantiation.
*   Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
    PGM_SINGLE_TOP,
*   Remove "Return" prefix on many function names.
*   Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
*   Fix building boost for use in a DSO on linux.
*   Remove some of the assumptions in the CMakeLists.txt files that windows had
    to be the host platform when building windows binaries.
*   Reduce the number of wxStrings being constructed at program load time via
    static construction.
*   Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
    these functions are useful even when the wxConfigBase comes from another
    source, as is the case in the KICAD_MANAGER_FRAME.
*   Move the setting of the KIPRJMOD environment variable into class PROJECT,
    so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
*   Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
    its child wxFrames and wxDialogs now have a Kiway() member function which
    returns a KIWAY& that that window tree branch is in support of.  This is like
    wxWindows DNA in that child windows get this member with proper value at time
    of construction.
*   Anticipate some of the needs for milestones B) and C) and make code
    adjustments now in an effort to reduce work in those milestones.
*   No testing has been done for python scripting, since milestone C) has that
    being largely reworked and re-thought-out.
2014-03-19 19:42:08 -05:00
Wayne Stambaugh 949118a030 Minor coding policy fixes. 2014-02-20 19:06:37 -05:00
Henner Zeller 3132c70e54 * Apply Henner Zeller's patch to add connecting line from reference and labels to component position whilst moving to help identify which component the reference or label belongs too 2014-02-11 21:54:30 +00:00
Wayne Stambaugh efb96bcce9 Eeschema block end handler code improvements.
* Merge HandleBlockEnd() and HandleBlockEndByPopUp() into as single block
  end function HandleBlockEnd().
* Replace all instances of HandleBlockEndByPopUp() with HandleBlockEnd().
* Change block hot keys to send command events instead of directly calling
  end block handler.
2013-10-15 12:18:30 -04:00
jean-pierre charras daeeee5617 Eeschema: Rework on netlist generator: code clenenig and enhancement.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
2013-09-25 21:09:57 +02:00
Dick Hollenbeck c0832a0342 BUG FIX: eeschema as segfaulting on the 'Insert' key because the m_itemToRepeat
was simply a pointer to an object on the display list.  At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a 
crash.  This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
2013-08-05 16:02:41 -05:00
Dick Hollenbeck efb34166ea *) retain grid origin in the BOARD and save it in legacy and kicad board files.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
   class EDA_DRAW_FRAME.  This is a prelude to getting rid of BASE_SCREEN or
   splitting it up.
2013-08-03 00:15:23 -05:00
jean-pierre charras c4dc992c03 Eeschema: fix bug #1168116. Netlist generation: remove dead code and fully outdated option pspice "use net number"
Pcbnew: layer manager: display tooltips using translated form (where internationalized, but always shown in English).
2013-04-16 12:53:23 +02:00
Lorenzo Marcantonio f37812f898 Refactoring: split in two the SCH_BUS_ENTRY class 2013-04-01 12:35:20 +02:00
Antia Puentes f4af52f94d Eeschema: Allow to edit an schematic item while dragging 2012-12-29 13:55:36 +01:00
jean-pierre charras ba05519662 Eeschema: Add hotkey 'U' to edit reference. Better filtering for hotheys V, F, U: now the corresponding field is selected without selection list between component and the field. 2012-12-08 18:24:49 +01:00
jean-pierre charras 1dd0adf7e0 Eeschema: item drag command: Fix issue for overlapping items (from a Younes Manton's idea)
Added: display info when clicking on labels.
2012-11-20 12:35:09 +01:00
jean-pierre charras 6abf0e9f94 Eeschema: Bug fix (move component field was not undoable)
Minor enhancement in popup menus for wire and bus.
Kicad: stm32f0discovery template: very minor fix.
2012-10-23 18:37:19 +02:00
Dick Hollenbeck 44c25d14ec eeschema erc dialog extends from DIALOG_SHIM 2012-10-08 14:34:04 -05:00
Dick Hollenbeck 3a07ab1f09 *) 64 bit size_t is not compatible with %u printf format control. use "%zu"
where the 'z' prefix is for size_t arguments.

*) minor beautification
2012-08-24 06:14:10 -05:00
jean-pierre charras 20a6b7ea70 Eeschema: Fix incorrect display refresh when editing the reference of a component from the popup menu. 2012-06-03 13:16:08 +02:00
Wayne Stambaugh 45445dd88f Minor code improvements and coding policy fixes.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
  coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
  since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
  EDA_ITEM.
2012-03-26 19:47:08 -04:00
jean-pierre charras b5cac30abd Eeschema: fix a bug in bool SCH_LINE::MergeOverlap( SCH_LINE* aLine ): ends point of resulting segment incorrects.
remove unused icon files.
2012-03-19 08:48:29 +01:00