Test a few "centre-point-angle" cases and add some
generic geom code for testing vectors and boxes are within
tolerance (since rounding often creeps in).
Much of the arc-checking code will be useful to other
construction methods (e.g. point-point-point).
There are expected failures for the bbox code when
the arc passes though, but does not end on, a quadrant point
(0, 90, 180, 270). This is due to a defective
implementation of SHAPE_ARC::BBox() that does not take
into account the quadrant points. This will be fixed
as a follow-up.
The canvas type might change without the frame being notified. If this
happens, the user is presented with repeated notifications of OpenGL
issues. Howver, switching canvas is not an error and should be
presented to the user as an info message to clarify that the system is
still working but it has changed how it renders the screen.
Fixes: lp:1795240
* https://bugs.launchpad.net/kicad/+bug/1795240
Build fails on GCC, but not with Clang. Modify the check to only catch the
cases where GLM does not work for sure.
Reference: lp:1804030
* https://bugs.launchpad.net/kicad/+bug/1804030
Misuse of __WXWINDOWS__ for checking the presence of Windows. The correct
macro is __WINDOWS__ or __WXMSW__ in GUI programs.
__WXWINDOWS__ is always set, on all platforms.
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
This adds a unit test for the recent AddFileExtListToFilter
to demonstrate how to use it and the expected output.
The unit tests are a bit clunky, as the vararg approach cannot
work winth strings passed at runtime.
The local/dynamic ratsnest needs to calculate on a per-pad basis as the
module is always listed as having a visible ratsnest. This fixes the
finalized ratsnest viewed when routing as well as the show local
ratsnest regression.
Fixes: lp:1811010
* https://bugs.launchpad.net/kicad/+bug/1811010
Non-connected zones are, by definition, not connected, therefore, we
should not knock out thermal reliefs under any case
Fixes: lp:1810989
* https://bugs.launchpad.net/kicad/+bug/1810989
Frame refresh in wxWidgets sets the focus back to indeterminate state
and prevents hotkey action until the focus is captured again. Using
canvas update is the correct method to update the canvas display after
modifying zones/similar
Fixes: lp:1810993
* https://bugs.launchpad.net/kicad/+bug/1810993
The application warps the cursor when initiating some actions (dragging,
selecting modules or Find and Move). This warping should not also
trigger the autopan action.
Fixes: lp:1810787
* https://bugs.launchpad.net/kicad/+bug/1810787
When routing in high-contrast mode, the user may wish to place items
that are primarily on a different layer while remaining in high contrast
mode. This fixes a regression from 4.0.7
Fixes: lp:1804309
* https://bugs.launchpad.net/kicad/+bug/1804309
The default filename textbox confusingly could not be edited and the
checkbox for "Use default filename" would also use a default location.
As the netlist export is no longer required in the workflow, we can
simplify the layout to always show the user the file save dialog
allowing them to choose the location and name of the exported netlist
file.
It was added when refactoring the SHAPE_POLY_SET class, ande replace any use of CPolyLine class inside Kicad code.
the CPolyLine related code is now not used.
So this test nowadays makes no longer sense.
Also modify the linkage of kiface objects, as this is not
supported by older CMake versions.
This was accidentally removed with the reversion of the application
of the wrong patch (8f11a2133).
QA: fix object files
Some functions aren't defined on Boost < 1.59, which is
sadly inclusive of the Ubuntu LTSs.
Make some guards so you can still use these on the newer
Boosts with some useful fallback where possible.
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
Devolve the logic as to whether a pad should be numbered or not
to a pad utility function. Add a very simplistic test for this
function (demonstrating how to test BOARD_ITEMs in general).
Fixes: lp:1804787
* https://bugs.launchpad.net/kicad/+bug/1804787
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
wxWidgets provides a system-dependent string for "*" or "*.*" depending
on the system. Unfortunately, wxFormBuilder does not use this and
instead defaults to the Windows-only "*.*". This is an ugly work
around.
Fixes: lp:1810221
* https://bugs.launchpad.net/kicad/+bug/1810221
It is very difficult to select 0-width lines and they aren't physical on
the board. Items with this setting in Eagle should revert to the
default in KiCad.
Fixes: lp:1808584
* https://bugs.launchpad.net/kicad/+bug/1808584
If you use add_custom_command to generate the grammar file,
it can be removed by "make clean". This then means the user will
need to get it back from Git, or regenerate it with Lemon.
Changing to add_custom_command removes the output file
from the clean list. The incantation to rebuild the grammar
remains the same: "make libeval_grammar", and it is still not
required to have lemon installed for a normal build.
Fixes: lp:1809610
* https://bugs.launchpad.net/kicad/+bug/1809610
When at small zoom levels, the integer bbox can overflow, preventing
redraw. We fix this by redrawing the full tree when this happens
Fixes: lp:1733067
* https://bugs.launchpad.net/kicad/+bug/1733067
Bitmaps loaded via wx can contain alpha channels. We utilize underlying
routines to correctly map the alpha. This also standardizes the Cairo
alpha calls to ensure correct display in Fallback for partially
transparent highlights
Fixes: lp:1809845
* https://bugs.launchpad.net/kicad/+bug/1809845
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode. This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.
This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
Currently, GAL is initialised to NONE (i.e. off). This causes
issues when Legacy canvas is broken (i.e. GTK3).
This changes the default to GAL Cairo, both in PCB_EDIT_FRAME
init, and in the config load.
Now, when the user starts with no config, they are prompted for
a choice: OpenGL or Cairo, and one of them will be set up, with
Cairo as fall back.
Users on platforms that still support legacy can go to it as normal
from the menu, but it will not be the default in any circumstance.
Fixes: lp:1809997
* https://bugs.launchpad.net/kicad/+bug/1809997
If a Scroll event is skipped, a default handler is fired by wxWidgets.
This default default handler fires 3 wxEVT_SCROLLWIN_LINEUP or wxEVT_SCROLLWIN_LINEDOWN events.
This is not wanted now in eeschema (and pcbnew) because they add extra (unwanted) scrolling.
Fixes: lp:1810403
https://bugs.launchpad.net/kicad/+bug/1810403
Where we can get away with lower segment counts (localizing an anchor),
we keep the low-def 16 segment count. Intermediate values and values
that are visible to the user are set to high definition. Most are
simply hints to the inflation correction but where they show, the user
show see smooth lines.
Most rounding operations have been shifted to an absolute error
calculation and the ability to adjust zone segment counts has been
removed in 5.1. The remaining elements that use fixed segment counts
are either 18 (DRC) or 32 (plotting). This aligns the punchout segment
count with the higher (32) definition value
John Beard
Seth Hillbrand
Wayne Stambaugh
Thomas Pointhuber
jean-pierre charras
Fabián Inostroza