(Surprisingly we used to in 5.1, so this is a regression.)
Also had to go back to the nag dialog as on a small screen the infobar
comes up behind the dialog. A lot of the errors have also been turned
into warnings, so the overall effect should still be to reduce nagging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6992
When editing a new footprint from the board editor, if the Footprint editor has the pad editor
open, there is a risk of crash when replacing the footprint in edit.
Fixes#6892https://gitlab.com/kicad/code/kicad/issues/6892
Also improves the pad warning and error messages, and moves a few
remaining nags from the setting infrastructure to the warning
infrastructure.
Fixes https://gitlab.com/kicad/code/kicad/issues/6141
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
This commit applies display origin transforms to all Pcbnew
dialog classes that use UNIT_BINDER for their formatting:
* DIALOG_CREATE_ARRAY
* DIALOG_FOOTPRINT_BOARD_EDITOR
* DIALOG_GRAPHIC_ITEM_PROPERTIES
* DIALOG_GRID_SETTINGS
* DIALOG_MOVE_EXACT
* DIALOG_PAD_PROPERTIES
* DIALOG_POSITION_RELATIVE
* DIALOG_TEXT_PROPERTIES
* DIALOG_TRACK_VIA_PROPERTIES
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
Due to the fact basic primitives for custom pads are now managed by
a list of pointer, the default copy ctor and default operator = do not work
(the basic primitives list must be duplicated).
It fixes issues related to primitives list id pad edition, footprint edition
and undo/redo
Fixes#4958https://gitlab.com/kicad/code/kicad/issues/4958
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
- fix many wxWidgets alerts.
- ensure pad offset wxTextCtrs are shown or not according to the wxCheckBox state.
- ensure there is room in dialog for some wxTextCtr when switched from Hide to Show
(resize it if it is too small)
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Property is a pad info used mainly for fabrication or test.
Currently, supported properties are:
BGA property (variant of SMD pad)
Fiducial (global to the board or local to the footprint)
Test Point
Heat sink
Castellated.
And are used in Gerber files (copper layers and drill files)
Increment BOARD_FILE_VERSION to 20200104
The aperture option created a Connector pad only on the paste layer.
This is incorrect: the SMD type only is acceptable.
5connector is *only* for edge card connectors.
Moreover, The dialog did not even accept the setting defined by this dialog...
The thermal spokes are anchored at the pad anchor. They may or may
not make sense, depending on the pad shape. It's up to the author
to move the anchor around as necessary or to not use thermals.
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
When designing pads, it can be helpful to not only see the resulting
rounded rectangle radius from a given percentage but also to set it,
constraining the related percentage. This adjusts the dialog to allow
editing the rounded rectangle corner radius. It does not change the
file format as the resulting ratio is saved. Further updates of the pad
size or ratio will modify the radius.
Fixes: lp:1668020
* https://bugs.launchpad.net/kicad/+bug/1668020
Also fixes a bug where nets wouldn't get changed because the
pads weren't changed and so the pad nets would propagate and
wipe out the changed nets on the tracks.
Also includes warning dialogs that pad nets will be changed if the
track nets are.
Fixes: lp:1779854
* https://bugs.launchpad.net/kicad/+bug/1779854
Well, almost anyway. We can't use a pad attribute for them as
that would change the file format. So they're currently
defined as a CONN pad with no copper layers.
However, when figuring out of existing pads should be *treated*
as aperture pads, we just check for no copper layers.
Fixes: lp:1781760
* https://bugs.launchpad.net/kicad/+bug/1781760
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Footprint properties dialogs: add test for negative net clearance, similar to the Pad properties dialog test.
Add also a info message in dialogs, to avoid mistakes when setting the local clearances.
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
- pad names are stored as wxString instead of a char[4] & integer union
- removed pad name to string conversion functions
- fixed pad & pin properties dialog restrictions regarding the name
length
jean-pierre charras
Seth Hillbrand
Jeff Young
Marek Roszko
Roberto Fernandez Bautista
Jon Evans
Mikolaj Wielgus
Reece R. Pollack
Ian McInerney
Michael Kavanagh
Seth Hillbrand
Tomasz Wlostowski
Andrzej Wolski
Maciej Suminski