Rename PART_LIB GetEntryNames() and RemoveEntry() to GetAliasNames() and
RemoveAlias() respectively for improved readability.
Rename PART_LIBS FindLibraryEntry() to FindLibraryAlias() improved
readability.
Remove commented out PART_LIBS::FindLibraryEntries().
Remove PART_LIB::GetFirstEntry() and update all effect code accordingly.
Remove unused PART_LIB::SetFileName() method.
Remove unused PART_LIBS::RemoveAllLibraries() method.
* Derive SCH_SHEET_PATH from std::vector< SCH_SHEET* > and remove unnecessary
assignment operator and list management functions.
* Remove function BuildSheetPathInfoFromSheetPathValue() since it was
effectively an assignment operation.
* Replace all calls to BuildSheetPathInfoFromSheetPathValue() with assignment
operator.
* Replace list management functions with vector management functions.
* Fix a error message that wasn't translatable.
* Remove wxDC and EDA_DRAW_PANEL as parameters from function
SCH_SCREEN::TestDanglingEnds().
* Change SCH_SCREEN::TestDanglingEnds() to return the connection change state
rather than the dangling end status which wasn't used anywhere.
* Update all calls to SCH_SCREEN::TestDanglingEnds() to remove wxDC and
EDA_DRAW_PANEL parameters and refresh connection indicators only if a
connection state change occurred.
* Add const and non-const version of GetRootSheet() to SCH_SHEET.
* Add GetSheetPaths() function to SCH_SHEET which behaves the same way
as SCH_SHEET_LIST except it uses standard C++ containers and is a much
simpler design.
* Add code to test for sheet path recursion to SCH_SHEET_PATH and SCH_SHEET_LIST.
* Add recursion tests to edit sheet code in Eeschema.
* Add recursion tests to block paste code in Eeschema.
Fix a i18n issue in field names when loading a component, if the language was changed during a session, and kicad not restarted (see Bug #1448654).
However changing the language needs restarting kicad, in order to have all messages or menus translated.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed #include
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
Remove a minor warning message in Debug mode for 2 dialogs.
Pcbnew: update Gerber X2 file format (File Attribute) to very last X2 specification
Eeschema: Fix a minor bug in block selection (sometimes the last selected component was select instead of items in selected area)
and better drag behavior when draging an item by the drag hotkey.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
* Merge HandleBlockEnd() and HandleBlockEndByPopUp() into as single block
end function HandleBlockEnd().
* Replace all instances of HandleBlockEndByPopUp() with HandleBlockEnd().
* Change block hot keys to send command events instead of directly calling
end block handler.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
was simply a pointer to an object on the display list. At times this object
would disappear from the display list, in the test case because of a concatonation
of two wires, and if you then tried to clone the non-existent object you'd get a
crash. This was not merely a bug, but a naive design choice. IMO.
Now the item to repeat is cloned, so will never also be on the display list.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* Create command event handler for orienting schematic items and block.
* Remove redundant orient item and block command handler code and IDs.
* Remove redundant cancel current command event table entry.
* Remove unnecessary schematic bitmap object virtual functions.
* Set path when saving schematic sheet files to prevent assertion in
updated path and file write permission test function.
* Restore directory and file name write permission test function to it's
previous behavior to prevent unexpected save results.
* Add an assertion to verify the path is not empty to directory and file
write permission test function.
* Improve documentation for path and file write permission test function.
* Fix Doxygen link warnings.
* Create command event handler for draggining all schematic items.
* Remove redundant delete item command handler code.
* Remove unused close current tool command ID from process special
functions event handler.
* Add a rotate event handler to schematic frame object.
* Remove unique rotate item command IDs.
* Use process event instead of post event to eliminate the need to clean
up the command event client object from the heap.
* Unify find next item and next DRC error hot key commands.
* Unify move and rotate hot keys commands.
* Tweak move item to support moving schematic sheet pin objects.
* Change schematic sheet pin set position to constrain position within
the parent sheet.
* Schematic sheet pin moving now handled by unified move code.
* Remove old schematic sheet pin move code.
* Add custom client data object for passing hot key information to
command event handlers.
* Fix a bug that prevented changes to schematic sheet pin objects from
being undone.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
Eeschema:
* Graphic texts ans labels: fix fully broken undo/redo code relative to the way undo/redo command
* handles changes (maintly move) for labels
* Fix minor bug for undo command relative to block rotate
* Remove dead code.
* Add new class BITMAP_BASE, and (for Eeschema) SCH_BITMAP to handle bitmap images in schematic.
Remember plot Bitmaps in not possble with all plotters.
* Warn the user that fields with no value and not it the field template list
will be removed from the component before exiting the edit component in
schematic dialog.
* Add a function to TEMPLATES class to check if template list contains a
field with a given name.
* Move the function to display the edit component in schematic dialog into
the SCH_EDIT_FRAME class.
* Doxygen and coding style policy fixes.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
* Change all code references to pin sheet and sheet label to sheet pin to
more closely match the sheet pin object for improved code readability.
* Change menu and tool bar text from pin sheet to sheet pin for improved
user readability.
* Moved sheet pin place method to sheet pin object source file.
* Move last sheet pin stored state information into schematic frame object.
* Add Doxygen comments for the sheet pin editing methods.
* Remove specialized edit reference, value, and foot print field methods
from SCH_FRAME object.
* Improve general field method to handle all field types as this was
essentially the same code used in the three methods removed.
* Updated the the hot key and context menu handlers to use the new field
edit method.
* Minor Doxygen comment warning fixes.
* Add item clarification context menu to EESchema when multiple unresolved
items are found at the current cross hair position.
* Add collector class SCH_COLLECTOR for supporting multiple item hit testing.
* Removed bit wise masked filtering from schematic item hit testing.
* Removed all old hit testing functions and methods scattered about the
EESchema source code.
* Move terminal point test function into SCH_SCREEN object.
* Fixed bug in terminal point test when terminating a bus to a label.
* Define the < operator for sorting schematic items.
* Add area calculation method to EDA_Rect item.
* Add method for returning an item's bitmap for menu display purposes.
* Add method for returning an item's menu text for menu display purposes.
* Changed EDA_ITEMS container from boost::ptr_vector to std::vector.
* Factor coordinate string conversion code from EDA_DRAW_FRAME to function
CoordinateToString().
* Move locate function code into schematic screen object.
* Move test for junction needed into schematic screen object.
* Move test for marking connected items into schematic screen object.
* Move delete item function code into schematic screen object.
* Move delete all markers code into schematic screen object.
* Add method for locating multiple items in schematic screen object.
* Fix minor bug in schematic field object hit test declaration.
* Initial encapsulation work on item picker object.
* Remove duplicate doxygen comments from item picker object source file.
* Factor change schematic component orientation code out of switch statement
into separate function.
* Remove redundant command events from schematic editor hot key handler.
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Fix rendering bug in GerbView caused by wxDC scaling change caused by
setting the wxDC clipping region.
* Eliminate the need to have optional background erasing as the change
above fixed that problem as well.
* Default cursor handling improvements.
* Schematic editor cancel current tool command now use a single command
ID that is used everywhere the event is generated.
* Moved cancel current tool code from Process_Special_Functions to a
separate event handler.
* Add idle check method to block select object.
* Add block active check to base screen object.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Remove unused member variable m_SizeVisu from base screen object.
* Move nearest grid position code into base screen object.
* Add get cursor position method to base screen object.
* Add position parameter to OnHotKey method in base draw frame and all
derived objects.
* Pass logical position on left mouse button click and double click
events instead of device position.
* Pass logical position to on right mouse button click instead of device
position.
* Use logical event position parameter for locating items in EESchema
instead of the stored position.
* Remove unused position parameter when displaying component edit dialog
in EESchema.
* Comment out debugging macro in eeschema/template_field_names.cpp that was
preventing debug builds using wxWidgets 2.8.x.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
jean-pierre charras
Nox_firegalaxy
Wayne Stambaugh
Maciej Suminski
Chris Pavlina
Wayne Stambaugh
unknown
Dick Hollenbeck
Henner Zeller
Lorenzo Marcantonio
Antia Puentes
marco.
Andrey Fedorushkov
Marco Mattila