Commit Graph

66 Commits

Author SHA1 Message Date
Jeff Young bbd6c80507 Collapse FP_* down into their PCB_* equivalents. 2023-03-31 22:57:46 +01:00
Jeff Young f0b2902b8c Don't allow quit while zone filler is running.
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
Jeff Young 91c5bb9175 Block user-initiated zone-fill actions, but not system ones.
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
Jeff Young 4c63b4e061 Class name <-> file name sync. 2022-12-29 18:05:57 +00:00
Jeff Young 5dce8323e8 KIGFX::REPAINT is not enough if the item isn't in the view.
Fixes https://gitlab.com/kicad/code/kicad/issues/11656

Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
Jeff Young 3c4c4e5166 Remove shortened debug time from zone refill message.
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
Jeff Young 19eab62516 More safety around ratsnest state.
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
Jon Evans 41ca2789a6 Get rid of shadowing warning 2022-11-29 18:12:39 -05:00
Jeff Young 31eb91e9e5 Infobar for slow zone auto-refill. 2022-11-29 21:09:16 +00:00
Jeff Young b6bd74d822 Replace single zone fill under "draft" terminology.
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
Jeff Young c409646aad Update message panel after rebuilding connectivity.
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
Jeff Young 9724f6e736 Don't allow zone filling during other editing operations.
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.

Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
Jeff Young 4633d251a5 Remove single-zone-fill and unfill.
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
Jeff Young 4af98827fd Revert change for 11299, and update removed-pad items after zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
Jeff Young d67437a2aa Move ratsnest exclusion processing to a post-pass.
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
Jeff Young 1966972fc1 Retire no-pads warning in favour of defaulting to area-based remove islands strategy. 2022-03-01 19:19:18 +00:00
jean-pierre charras a7b8a1446b fix minor compil warnings. 2022-02-25 14:26:37 +01:00
Jeff Young bc51c89c90 Reconcile zone-auto-fill with undo. 2022-02-25 13:05:49 +00:00
Jeff Young b7be42375d Add an infobar warning when trying to fill a zone which is not connected. 2022-02-24 21:32:43 +00:00
Jeff Young d465eb6425 ADDED: automatic zone refilling.
This is for the out-of-box experience for novice users.  It is presumed
that folks with larger more complicated boards will turn it off.

Fixes https://gitlab.com/kicad/code/kicad/issues/6413
2022-02-24 18:16:45 +00:00
Jeff Young 662fb40605 Slightly cleaner impl. 2022-02-17 12:48:29 +00:00
jean-pierre charras 5a9fb08778 zone_filler_tool: fix crash due to a null pointer use in zone filler.
Fixes #10875
https://gitlab.com/kicad/code/kicad/issues/10875
2022-02-17 09:21:14 +01:00
Jeff Young b1bd8421e0 Performance: remove associated triangle sets when removing outline.
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
Jeff Young 5c9e718407 Performance enhancements for connectivity.
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
Jeff Young 98b9c6e2a1 Better progress reporting and a slight performance boost on commit. 2022-02-15 12:20:34 +00:00
Jeff Young d2de114d21 More performance optimizations. 2022-02-15 12:20:34 +00:00
Jeff Young 4cc1ced2f3 Log an undo item when filling zones.
If we wanted to put it into the parent's undo item, then the *parent*
would need to not start a new undo record.  Not starting one in the
zone filler tries to add it to the *previous* change, not to the parent
change.

Fixes https://gitlab.com/kicad/code/kicad/issues/10091
2022-02-04 13:45:32 +00:00
Seth Hillbrand 401de24274 Recalculate ratsnest after zone fill
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills.  The connectivity update
cannot run while the mutex is locked for zone fills.

Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
Jeff Young 41619ebbe2 Decouple PROGRESS_REPORTER interface from implementations. 2021-08-14 21:05:49 +01:00
Jon Evans f8e9542004 Fix crash when opening board setup after zone filler exits 2021-06-18 12:23:12 -04:00
Jeff Young c8444913df Implement lock between zone filler and drc.
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Jeff Young e6bf922a77 Make sure connectivity is locked for zone filling.
See 1e33928b96
for the original addition and rationale.
2021-04-25 18:09:53 +01:00
Jeff Young 3279e295ac Don't start filling zones with possibly stale caches.
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
Roberto Fernandez Bautista a9eb83201e Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands

This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
Roberto Fernandez Bautista a743e0c52b Add Zone fill to undo stack
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
Jeff Young 2bc10d58b5 Fix some cases where PCB_FP_ZONE_T was left out.
Fixes https://gitlab.com/kicad/code/kicad/issues/7615
2021-03-08 13:00:46 +00:00
Jon Evans 1e33928b96 Fix issues with zone filling connectivity locking
Two issues found with the locking system used to prevent access to
stale connectivity data during the zone fill process:

1) a std::mutex has undefined behavior if you try to use it to guard
against access from the same thread.  Because of the use of wx event
loops (and coroutines) it is entirely possible, and in some situations
inevitable, that the same thread will try to redraw the ratsnest in the
middle of zone refilling.

2) The mutex was only guarding the ZONE_FILLER::Fill method, but the callers
of that method also do connectivity updates as part of the COMMIT::Push.
Redrawing the ratsnest after the Fill but before the Push will result in
stale connectivity pointers to zone filled areas.

Fixed (1) by switching to a trivial spinlock implementation.  Spinlocks would
generally not be desirable if the contention for the connectivity data crossed
thread boundaries, but at the moment I believe it's guaranteed that the reads
and writes to connectivity that are guarded by this lock happen from the main
UI thread.  The writes are also quite rare compared to reads, and reads are
generally fast, so I'm not really worried about the UI thread spinning for any
real amount of time.

Fixed (2) by moving the locking location up to the call sites of
ZONE_FILLER::Fill.

This issue was quite difficult to reproduce, but I found a fairly reliable way:
It only happens (for me) on Windows, MSYS2 build, with wxWidgets 3.0
It also only happens if I restrict PcbNew to use 2 CPU cores.
With those conditions, I can reproduce the issue described in #6471 by
repeatedly editing a zone properties and changing its net.  The crash is
especially easy to trigger if you press some keys (such as 'e' for edit)
while the progress dialog is displayed.  It's easiest to do this in a debug
build as the slower KiCad is running, the bigger the window is to trigger this
bug.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6471
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7048
2021-01-18 13:22:12 -05:00
Jeff Young d0af4e9f9d Save a cancel value when asked if it's not being used to cancel.
Many, many KIDIALOGs use OK/Cancel and then rename both buttons to
confirm or deny some action.  In those cases we *do* want to store
the deny actions if they check "Do Not Show Again".

Fixes https://gitlab.com/kicad/code/kicad/issues/6979
2021-01-08 21:32:19 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
Jeff Young fc6fc88219 Zone fill fixes for divots and hatching + more debug layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/6203
2020-10-29 21:20:34 +00:00
Jeff Young 1ee3df61c9 Improve robustness of infobar button handling. 2020-10-16 17:07:59 +01:00
Jeff Young eea7957e16 Inform user of bad DRC rules when filling zones.
ADDED: facility for hypertext links in infobar.

Also made use of this for via constraint errors when routing.

Fixes https://gitlab.com/kicad/code/kicad/issues/5800
2020-10-16 12:44:20 +01:00
Jeff Young 4badcba4c2 Zone fill performance improvements
1) better load-balancing for deferred zones
2) sort zones by priority before filling
3) retire BOARD::GetZoneList() which had a horrible performance profile
4) implement a zone bounding box cache
5) better checks for IsCancelled() so long fills can be exited

Fixes https://gitlab.com/kicad/code/kicad/issues/5738
2020-09-21 21:09:58 +01:00
Jeff Young ce3819abf8 Remove redundant clearances from DRC dialog. Fold progress bar in. 2020-09-16 16:06:29 +01:00
Jeff Young 514da2f886 Move DRC dialog to new DRC engine. 2020-09-14 22:39:36 +01:00
Jeff Young 7893af2c60 insideArea should be outline-based, not fill-based.
Fixes https://gitlab.com/kicad/code/kicad/issues/5499
2020-09-05 00:25:19 +01:00
Jeff Young a6d44676b3 Move commit handling outside of ZoneFiller.
This allows us to rever the commit on a cancel.

Fixes https://gitlab.com/kicad/code/kicad/issues/5107
2020-08-12 22:20:07 +01:00
Jeff Young fe188489c7 A better hack for the post-ProgressReporter-loss-of-focus issue. 2019-07-14 18:18:48 +01:00
Jeff Young 183687c69e Cleanup and a big hack to prevent keyboard focus loss.
Fixes: lp:1810993
* https://bugs.launchpad.net/kicad/+bug/1810993
2019-07-08 20:45:42 +01:00