Commit Graph

126 Commits

Author SHA1 Message Date
Jeff Young bbd6c80507 Collapse FP_* down into their PCB_* equivalents. 2023-03-31 22:57:46 +01:00
Jon Evans 65193487a6 Properties: Rename methods to better reflect their purposes 2023-03-26 19:43:16 -04:00
Jeff Young ee1d9c561c Improve zone & rule area reporting.
Also removes a bunch of "wxEmptyString" where it was degrading readability.

Also fixes a bug where footprint zones were getting sorted incorrectly
due to rotation of coordinates.

Fixes https://gitlab.com/kicad/code/kicad/issues/14322
2023-03-17 13:28:29 +00:00
Seth Hillbrand 9146e38af4 Handle fully-nested zones
The logic to handle divots needs to account for fully nested, same net
zones.  The process of subtracting led to us considering the inner zone
to be a zone knock-out (negative polygon).  To avoid this, we need to
check if the inner, higher priority zone has any connection to the outer
zone.  If it does not, then we can treat it as an isolated zone without
worrying about divots to the outer zone.
2023-03-08 10:36:53 -08:00
Seth Hillbrand ffcc0e50b7 Handle excessively large values when hatching
While unusual, ensure that hatched zones don't break KiCad if they are
close to the integer limit

Fixes https://gitlab.com/kicad/code/kicad/issues/14066
2023-02-23 14:40:57 -08:00
Jeff Young 362d85ef50 Special selection mode when in high-contrast with courtyard layer active.
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
Jon Evans eb240fda9a Properties: introduce validators; re-enable zone hatch settings 2023-02-11 11:44:58 -05:00
Jon Evans 254168c788 Properties: introduce method chaining for initialization 2023-02-11 11:44:58 -05:00
Jon Evans e066454c61 Zones: use metric defaults and limits instead of mixed units
Update testcases to reflect new defaults
2023-02-11 07:39:29 -05:00
Jon Evans 92a61b187f Properties: Hide zone fill type settings for now
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13811
2023-02-08 21:56:15 -05:00
jean-pierre charras 737318a24d struct ZONE_DESC: ensure ENUM_MAP<PCB_LAYER_ID> is initialized before use it.
ENUM_MAP<PCB_LAYER_ID> is tested initialized in some other XXX_DESC,
but not in ZONE_DESC
Fixes #13699
https://gitlab.com/kicad/code/kicad/issues/13699
2023-02-02 09:11:27 +01:00
Jeff Young bf4b9ef6e2 Remove sorting by priority before filling.
We can't fill lower-priority zones until the higher-priority ones
have been tesselated, and as the tesselation step always gets pushed
to the back of the queue after the fill finishes having them sorted
by priority accomplishes little.  (We're also going to push all other
layers of the high-priority zone to the back as the first layer will
have the lock, further degrading the usefulness of sorting.)
2023-01-15 15:52:24 +00:00
Jon Evans c530bdb5a1 Rename GetSelectMenuText to GetItemDescription
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
qu1ck 2654279678 Cleanup zone bbox cache in destructor 2023-01-12 00:21:51 +00:00
Jon Evans 5eb3f5d3e7 Use correct translation macro for group names
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13277
2022-12-26 20:11:20 -05:00
Jon Evans fbaf4af489 Properties: Allow dynamic update of read-only state 2022-12-25 20:35:44 -05:00
Jon Evans 435651237c Properties: Support overridden availability functions 2022-12-08 00:09:51 -05:00
Jon Evans 4134db3c47 GCC fixes 2022-12-02 22:38:15 -05:00
Jon Evans 050d282c12 Properties: Hide some copper-only properties from non-copper zones 2022-12-02 21:59:17 -05:00
Jon Evans 3b25fdc212 Properties: Fix zones stomping on position props for other items 2022-12-01 16:55:12 -05:00
Jon Evans 757b73e50e Hide some unusable zone properties 2022-11-30 23:36:53 -05:00
Jon Evans b2b3f5752f Properties: Add grouping and sorting by creation order 2022-11-27 22:40:23 -05:00
Jon Evans 74a2e4cad9 Properties: Add support for zone connection style 2022-11-25 18:44:02 -05:00
Jon Evans 220ef6fb44 Properties: Add some missing footprint properties; cleanup
Add concept of "internal" properties that will be accessible from
Python/DRC but not shown in the Properties Manager
2022-11-25 12:37:47 -05:00
Simon Richter fbc321c4c1 Fix initialization order
This avoids a conditional branch on an uninitialized value in valgrind.
2022-11-25 16:00:23 +00:00
Jeff Young c1510f07d8 Fix some issues with group bounding boxes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
Jeff Young 03ba14c6d3 Tighten lifecycle management of parent group pointers.
Also adds some debugging to try to catch dangling pointers.

Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).

Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
Jeff Young 25f06eed8c Move zone borders back to their "host" layer.
Zone borders shouldn't be affected by zone-opacity control; we always
draw them in full layer opacity.

Fixes https://gitlab.com/kicad/code/kicad/issues/12438
2022-11-05 16:50:54 +00:00
Jeff Young e33c611488 Replace collision calls with ones that work.
I'm not sure why the old calls didn't work, but they reported "no
collision" between two overlapping zones.
2022-11-03 17:19:59 +00:00
Jeff Young 1f4e51b008 Be careful of interveneing priority zones when doing divot prevention.
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
Jeff Young ce2dbdec75 Formatting and a bit of cleanup. 2022-10-21 18:41:39 +01:00
Jeff Young d16b23d16e Name shortening and line-break reduction. 2022-10-21 18:41:39 +01:00
Jeff Young 04fec5016b Add keepout zones set to keepout footprints to footprint courtyard checker.
(This is for the move tool, not DRC.  DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)

Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
Jeff Young 97d4df4154 Better thread safety for zone boundingbox caches. 2022-10-02 19:30:43 +01:00
Jeff Young e49de68a59 Implement a more durable zone bounding box caching strategy.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
Jeff Young 897135a4f0 Support mirroring on the board too.
Also fixes a few bugs in FP item mirroring.

Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
Marek Roszko 1b962a1660 Expand zone info a little
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12479
2022-09-20 22:16:50 -04:00
Seth Hillbrand 0295090135 Zone Fill performance for overlapping zones
When multiple zones overlap each other, we need to synchronize the
filling.  This should not wait for all zones to try to fill before
restarting.  Instead, zones that cannot be filled because the depend on
another zone finishing are immediately re-inserted into the fill queue.
2022-09-19 10:11:06 -07:00
Jeff Young 64a6fc0fd4 Push UNITS_PROVIDER down into a low-level mixin.
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
Jeff Young 45d6b4a9fc Readability improvements. 2022-09-19 11:18:20 +01:00
Marek Roszko a8613ee80f Combine Iu2Millimeter & remove PcbMm2iu 2022-09-16 21:09:26 -04:00
Jeff Young 90bc5c19cf Performance enhancement for zone filling. 2022-09-16 19:16:15 +01:00
Mark Roszko b00178adb3 Nuke base_units from orbit 2022-09-16 04:38:10 +00:00
Jeff Young f17a865593 Move EDA_ITEM hitTest to BOX2I. 2022-08-31 17:18:45 +01:00
Jeff Young 2dc6300501 Move EDA_ITEM bounding boxes to BOX2I. 2022-08-31 10:16:55 +01:00
Jeff Young 5679b9dbdc Remove a few EDA_RECT instances. 2022-08-31 01:22:49 +01:00
Seth Hillbrand ee95224517 Ensure that teardrops always get filled first
Teardrops are, by definition, higher priority than standard zones, so
ensure that they cannot be overriden
2022-08-25 08:54:34 -07:00
Maciej Suminski af71d42307 Renamed PROPERTY_TYPE enum names to avoid a conflict on MSYS2 2022-08-22 21:32:32 -04:00
Maciej Suminski 95fd58b25a Properties meta-data for pcbnew classes 2022-08-22 21:32:00 -04:00
Jeff Young a9536b5de9 CHANGED netclass assignments now done via canvas or via patterns. 2022-08-14 22:56:29 +01:00