3158273c1a
Revert window-locking change which didn't fix preferences crash.
2018-10-13 15:53:54 +01:00
6a5744adb1
Show compile errors and go back to GLSL V120.
2018-10-13 12:39:53 +01:00
d03b08a03f
gerbview: Prevent NULL dereference
...
There was a possible NULL dereference when executing tool_up even
though we should never hit it, we protect against bad files.
Also converts a couple untranslated error strings.
2018-10-11 14:23:07 -07:00
9dfcc839a4
Fix color issues with cursor and sheet pins.
2018-10-09 11:08:56 +01:00
e439b17fa1
eeschema-gal: make sure all other Kicad apps compile after eeschema gal hacks
2018-10-09 11:08:52 +01:00
664fb234ff
GerbView: Add actions to reload files
...
NEW: Adds new items in File Menu and Toolbar to reload the Gerber files
for all layers.
Fixes: lp:1794004
* https://bugs.launchpad.net/kicad/+bug/1794004
2018-10-09 09:16:06 +02:00
606096b548
Gerbview: fix a overzealous wxASSERT
...
Fixes: lp:1796744
https://bugs.launchpad.net/kicad/+bug/1796744
2018-10-09 08:39:21 +02:00
445a9fa963
Put cursor and pan control in libcommon/tool, enable in Gerbview
...
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
2018-10-04 11:41:06 +02:00
4136aca221
Gerbview: Excellon drill files reader: add a better support of routing mode.
...
Previously, the M and G00, G01, G02 and G03 commands were read, but nothing was actually done.
The current support is a bit rough, but it allows reading some drill files with routing commands.
2018-09-24 13:12:47 +02:00
5974899fa5
Clean up file locations and names.
2018-09-22 16:23:13 +01:00
666da3849b
Make esc dismiss net and layer selector popups.
2018-09-22 16:23:13 +01:00
40a3b4a533
GERBVIEW_RENDER_SETTINGS: verify item type
...
Not all items displayed by Gerbview are GERBER_DRAW_ITEMs (e.g. WORKSHEET_VIEWITEM),
so appropriate checks have been added.
2018-09-18 15:18:55 +02:00
0109641c2f
gal: correct layer ordering
...
Net labels need to be rendered under the selected item.
Fixes: lp:1790016
* https://bugs.launchpad.net/kicad/+bug/1790016
2018-08-30 16:55:48 -07:00
5f74560a46
gerbview: Add LAYER_SELECT_OVERLAY to GAL
...
Ensure selected gerbview layers plotted on newly created SELECT layer
2018-08-28 15:13:54 -07:00
86a801aabc
Allow updating of file history size on the fly.
...
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
2018-08-21 10:34:41 +01:00
acec00f80a
Fix bug displaying canvasses when starting in Legacy mode.
2018-08-11 23:43:19 +01:00
d81faa72c9
Overhaul border drawing in all the Kicad frames.
...
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
2018-08-11 17:25:38 +01:00
33fc74a04d
Performance enhancements for Footprint Editor construction.
2018-08-04 10:29:17 +01:00
6e9990449f
Gerbview: fix a minor log warning.
2018-07-30 16:19:35 +02:00
977f27f3c4
Adjust spacing on preference panels.
...
Giving them the correct parent changed the spacing.
(cherry picked from commit 7f602f3)
(cherry picked from commit 718db46)
2018-07-17 15:14:25 +01:00
abae094955
Remove unused variables.
...
(cherry picked from commit 4fc5281)
(cherry picked from commit b151c8d)
2018-07-17 15:14:22 +01:00
909f850d16
Give panels the correct parent (the treebook, not the dialog).
...
(cherry picked from commit 7338533)
(cherry picked from commit 3ce75be)
2018-07-17 15:14:19 +01:00
e329a411bf
Add grid and zone dropdowns to GerbView frame.
...
(cherry picked from commit be5c1e2)
2018-07-17 15:13:58 +01:00
a747d074c4
Add Worksheet to Render Items for GerbView.
...
Also added PCB Background Color.
Fixes: lp:1780362
* https://bugs.launchpad.net/kicad/+bug/1780362
(cherry picked from commit f789ef1)
2018-07-17 15:13:43 +01:00
df863e44e2
Wire m_showPageLimits control up to GAL canvas.
...
Fixes: lp:1499285
* https://bugs.launchpad.net/kicad/+bug/1499285
(cherry picked from commit 4cb7442)
2018-07-17 15:13:29 +01:00
5f3ee1e7ce
More g_UserUnit erradication.
...
(cherry picked from commit 3f08780)
2018-07-17 15:12:31 +01:00
7841f8a466
Unified preferences dialog framework.
...
(cherry picked from commit 8ee3e77)
2018-07-17 15:11:17 +01:00
eacaa39aa2
Remove global units usage from GetSelectionText...
...
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
2018-07-17 15:11:09 +01:00
0010ad37d1
In-place editing for footprint TEXTE_MODULEs.
...
Fixes: lp:1102168
* https://bugs.launchpad.net/kicad/+bug/1102168
Fixes: lp:1779913
* https://bugs.launchpad.net/kicad/+bug/1779913
(cherry picked from commit 83781ab)
2018-07-17 15:11:04 +01:00
05ef6f05d1
Move SanitizePads to CLIENT_SELECTION_FILTER architecture.
...
This not only reduces the number of different mechanisms, but
will also reduce (yet again) the number of Clarify Selection
pop-ups (because the CLIENT_SELECTION_FILTER runs before the
pop-up, while SanitizePads ran after it).
Fixes: lp:1710451
* https://bugs.launchpad.net/kicad/+bug/1710451
(cherry picked from commit e50a993)
2018-07-17 15:10:18 +01:00
a39fb03822
Remove some references to g_UserUnit
...
(cherry picked from commit 614d832)
2018-07-17 15:09:56 +01:00
4f8c546140
Implement user units uniformly in EDA_DRAW_FRAME
...
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
2018-07-17 15:09:51 +01:00
b99ea159c8
Rationalize select menu texts.
...
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
2018-07-17 15:09:48 +01:00
c291505830
Gerbview, read Excellon files: fix a few issues.
...
The main issue is the fact Excellon files have no coordinate fine format definition.
Only the units are defined.
Units are floating point numbers or integer numbers.
Integer numbers can be defined as 3.3 or 2.4 numbers (mm/inches)
However some files (altium drill files for instance) use an other notation.
This fix is a workaround to accept 2.x (inch) or 3.x (mm) notations.
Fixes: lp:1754121
https://bugs.launchpad.net/kicad/+bug/1754121
Fixes: lp:1782053
https://bugs.launchpad.net/kicad/+bug/1782053
2018-07-17 14:29:28 +02:00
2af5fb51f2
Revert "Perform coordinate format detection on Excellon drill files"
...
This reverts commit 3e033aee0c
2018-07-17 14:29:27 +02:00
9f7109826d
fix misspelled 'allows to' -> 'allows one to'
...
Fixup small grammar issues around used 'allows to ...' almost in
code comments.
2018-07-11 10:35:03 -04:00
ef38a198d1
GerbView: incorrect handling of polygon primitive: broken parameters rotation and drill size.
...
Fixes: lp:1778459
https://bugs.launchpad.net/kicad/+bug/1778459
2018-06-25 11:00:53 +02:00
e4a6f2e523
Switch canvas to Cairo if OpenGL is not supported on the first run
2018-06-04 12:17:58 +02:00
27c9c6ceed
Enable the accelerated canvas on the first gerbview run if requested
...
Commit 8910894f
2018-06-04 10:47:44 +02:00
8f984c2899
OpenGL, DrawGrid(): use grid and axis alpha color value setting, instead of the fixed 1.0
...
In Cairo mode, this function uses already the alpha color value setting.
Now for low alpha values (usually they are low, as said in many GAL comments),
Cairo mode and OpenGL mode should have a similar look.
2018-06-01 18:29:04 +02:00
bfa89039c4
Gerbview, GAL mode: fix "Zoom to fit" area size calculation when nothing is loaded.
...
Also ensure the worksheet is displayed after clearing the gerber layers.
2018-06-01 11:39:08 +02:00
9a228d8ec9
Gerbview: GAL mode: shows the page worksheet, similar to legacy mode.
2018-06-01 09:11:43 +02:00
fc71fc6474
Gerbview: Fit to page: use the page size when nothing is loaded.
...
Previously, due to a minor bug, a very small default size was used (therefore a high zoom value), that was not a good choice.
2018-05-31 11:22:33 +02:00
cd5f727880
Fix off-by-1 errors in zoom menus & use zoom steps in GAL canvas.
...
Also bumps the maximums a bit (at user request).
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-25 13:01:58 +01:00
81af2db614
Even out the Gerbveiw zoom steps and increase the max.
...
Fixes: lp:1773215
* https://bugs.launchpad.net/kicad/+bug/1773215
2018-05-24 19:04:10 +01:00
8506cdf3ae
Avoid numerical dereference of selections
...
The SELECTION is a std::set. Numerical dereference of item n is O(n) as
the iterator is not random access. Therefore, a for loop using
numerical dereference is O(n!) and quickly slows.
We avoid this by storing items to remove separately while iterating and
then removing the items after we complete.
Fixes: lp:1692081
* https://bugs.launchpad.net/kicad/+bug/1692081
2018-05-22 16:37:45 -07:00
8c5037a48b
Optionally sort reporter messages
...
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
2018-05-22 13:55:02 -07:00
5010a461e1
Make polar coordinates consistent.
...
Use theta instead of phi (which normally describes the azimuth
angle).
Fixes: lp:1545107
* https://bugs.launchpad.net/kicad/+bug/1545107
2018-05-18 12:22:14 +01:00
7c52af2d50
Gerbview: cosmetic enhancement: add icons in Clarify menu.
2018-05-17 10:24:09 +02:00
93e75af388
Rename plot_auxiliary_data.h file to gbr_metadata.h, according to the class names defined by this file
2018-05-17 08:07:29 +02:00
d8687e4eaf
Gerbview: minor code cleanup
2018-05-14 09:05:11 +02:00
8da242c593
Gerbview: accept any structured comment as X2 attribute.
...
A structured comment is a comment line starting by "G04 #@! " and in fact containing
a X2 attribute. It is used to create Gerber files contianing X2 metadata, but compatible
with X1 file format
2018-05-14 09:05:09 +02:00
a3770bf6e1
Gerbview: fix a crash when Gerbview starts by loading a gerber job file (run from a command line)
2018-05-07 12:47:11 +02:00
106dd60e45
Only adjust LAYER_WIDGET font size if larger than indicator.
...
Also moves adjustment into LAYER_WIDGET so all the callers don't
have to deal with it individually.
Fixes: lp:1767965
* https://bugs.launchpad.net/kicad/+bug/1767965
2018-05-02 21:49:57 +01:00
f911ef5186
Standardize print scale label for gerbview
2018-04-23 13:14:06 -07:00
ca06e67ffc
Standardize colons in gerbview display options dialog
2018-04-23 13:11:53 -07:00
aa0d67bdde
Standardize colons in gerbview print dialog
2018-04-23 13:10:53 -07:00
2925b93571
Gerbview: Remove dead code that handled a experimental .gbrjob file, now no longer existing.
2018-04-23 13:04:21 +02:00
cfa9916836
Prevent issuing a print command before the previous one is finished
...
Fixes: lp:1765965
* https://bugs.launchpad.net/kicad/+bug/1765965
2018-04-23 11:25:28 +02:00
3cc0554e33
Code formatting
2018-04-23 11:18:51 +02:00
07dc12fdd3
Fix incorrect UI management of Zoom to Selection, created by fix 2a419156
2018-04-14 17:44:17 +02:00
e9ef555c6a
Use Ctrl+F1 to display hotkey list also in Gerbview and Kicad manager
2018-04-14 17:12:28 +02:00
2a419156e0
Don't try to check uncheckable menu items.
...
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
2018-04-13 21:42:31 +01:00
df8bc93e4b
gerbview: Removed duplicate zoom-to-selection handler, made the toolbar button checkable
...
Fixes: lp:1763270
* https://bugs.launchpad.net/kicad/+bug/1763270
2018-04-12 11:52:08 +02:00
a11714b1a4
fix misspelled 'an other' -> 'another'
2018-04-08 13:24:37 -04:00
baef22df9a
Fix memory leak and push menu change to other apps.
...
Fixes: lp:1761848
* https://bugs.launchpad.net/kicad/+bug/1761848
2018-04-07 14:14:55 +01:00
a2f118d2fa
Gerbview: fix not working menu item "Zoom to Selection" in main menu. This also fixes a wxASSERT for this menu item
2018-04-03 16:30:16 +02:00
f8a3ec4974
Add a method to facilitate Tools handling in main frame toolbars.
...
Fix also a bug in gerbview_frame.cpp, about a broken toolbar accessor (fortunately not used in current code)
2018-04-03 13:00:20 +02:00
54f14b08ca
commit forgotten change in my previous commit
2018-03-31 18:46:29 +02:00
fa39acfc2f
Gerbview, export to pcbnew : export polygons as new DRAWSEGMENT polygonal shape.
...
It can creates issues on copper layers, but the only one other alternative is to ignore polygons in export,
and this is worst.
2018-03-31 18:43:12 +02:00
5b8c35f64d
Gerbview: minor fix: do not report error if in header INCH ot METRIC command has no parameter (,LZ or ,TZ format)
...
I am not sure it should be reported, because LZ or TZ format has no meaning in decimal format, and can be omitted.
2018-03-31 18:40:29 +02:00
1ec217d70e
Fix hit testing for zero-width gerber items
2018-03-29 22:04:51 -04:00
8d8c422a19
Add zoom to selection menu entry to all editors.
...
Fixes lp:1753339
https://bugs.launchpad.net/kicad/+bug/1753339
2018-03-25 12:34:19 -04:00
29ebca4053
Very minor fix: make a menu string more easily translatable
2018-03-22 21:00:41 +01:00
5b653c0c1e
Update MacOS icons
...
Fixes: lp:1750284
* https://bugs.launchpad.net/kicad/+bug/1750284
2018-03-22 11:45:42 -04:00
a931ac436a
Add some safety checks to Excellon number format detection
...
Fixes: lp:1754121
* https://bugs.launchpad.net/kicad/+bug/1754121
2018-03-21 22:29:43 -04:00
2ff74cb3fc
Add support for .gbrjob new file format (JSON format) in Gerbview
...
Add experimental code to generate .gbrjob files in the new JSON file format
2018-03-19 15:14:20 +01:00
5e34563f52
Fix a long calculation time that happens with some gerber files when closing Gerbview in legacy display mode.
2018-03-19 10:58:27 +01:00
4e76a18d5d
Add checks against missing D-Codes in flashed Gerber items
...
Fixes: lp:1756710
* https://bugs.launchpad.net/kicad/+bug/1756710
2018-03-18 21:55:27 -04:00
827b818b5d
Very minor fixes in Gerbview and Kicad:
...
Gerbview: fix X2 z order display of Adhesive (Glue) layers.
Kicad: very minor cosmetic enhancement in Create Project dialog.
2018-03-18 16:04:23 +01:00
9e8bcbea04
Gerbview: fix typo in tooltip string.
2018-03-16 09:41:53 -04:00
213b600b54
Revert active layer behavior so gerber/drill load behavior matches
...
Fixes: lp:1755713
* https://bugs.launchpad.net/kicad/+bug/1755713
2018-03-14 21:52:06 -04:00
fa41026f36
Fix issue in aperture macro with some strange gerber files.
...
Fixes: lp:1755623
https://bugs.launchpad.net/kicad/+bug/1755623
2018-03-14 14:55:51 +01:00
66d5d10b49
Gerbview: bigger line buffer to read some gerber files that have only one (very long) line.
...
small code refactor.
2018-03-14 10:42:18 +01:00
71d8a1ea1e
GerbView: fix legacy canvas refresh when drawing outline modes.
2018-03-13 18:25:03 -04:00
a5cca18dd1
GerbView: add view menu.
...
Include all actions provided by left vertical toolbar in a new view
menu for consistency with other main frames.
Move show/hide layer manager to view menu.
Simplify some toolbar and menu update logic.
Fixes lp:1753337
https://bugs.launchpad.net/kicad/+bug/1753337
2018-03-13 18:00:15 -04:00
43899bbe0e
Fix compile issues under some compilers.
2018-03-12 21:02:04 +00:00
4eedb3a27d
The _() macro affords some nullptr safety over a naked immediate.
...
Fixes: lp:1477448
* https://bugs.launchpad.net/kicad/+bug/1477448
2018-03-12 19:18:05 +00:00
e4b847b345
GerbView: fix a few issues with layer selection / info synchronization
...
Fixes: lp:1754135
* https://bugs.launchpad.net/kicad/+bug/1754135
2018-03-08 18:19:48 -05:00
9bede6900c
Standardize Kicad -> KiCad
2018-03-08 12:33:32 -08:00
23f49f014b
Code style fixes
2018-03-07 22:14:24 -05:00
3e033aee0c
Perform coordinate format detection on Excellon drill files
...
Fixes: lp:1754121
* https://bugs.launchpad.net/kicad/+bug/1754121
2018-03-07 22:08:59 -05:00
c3333d4665
GerbView: ensure view settings are saved/restored in measure tool
...
Fixes: lp:1754100
* https://bugs.launchpad.net/kicad/+bug/1754100
2018-03-07 18:56:59 -05:00
f7ef010fe1
GerbView: Minor cleanup of Menus + Toolbar for consistency.
...
replace: File -> File(s) when wxFD_MULTIPLE
replace: Load -> Open
replace: Erase -> Clear
add Excellon / Gerber where it makes sense
re-sort File menu
2018-03-05 18:33:21 -05:00
5a33f09608
Fix memory leak
2018-03-05 20:18:55 +01:00
cd2224b94d
Add missing hotkey support to GerbView
...
Fixes: lp:1752982
* https://bugs.launchpad.net/kicad/+bug/1752982
2018-03-04 16:59:23 -05:00
d2c86f8594
GerbView: Disable legacy-only event handlers when GAL is active
...
Fixes: lp:1752209
* https://bugs.launchpad.net/kicad/+bug/1752209
2018-03-04 16:21:24 -05:00
2da7199a37
GerbView: Fix active layer synchronization
2018-03-03 23:43:16 -05:00
2c85de3ab2
gerbview layer manager: fix a minor issue, and and icons in context menu, similar to pcbnew layer manager context menu
2018-02-28 10:21:37 +01:00
2c54f6fe32
GerbView: Fix DCode reordering; ensure loaded layers are visible
2018-02-28 08:23:41 +01:00
de483ac1aa
GerbView: only erase current layer if a new file is chosen
2018-02-28 08:23:40 +01:00
490a2105c3
Properly update view when GerbView display settings changed
2018-02-28 08:23:39 +01:00
cd14525839
GerbView: More accurate selection of arc shapes
2018-02-28 08:23:39 +01:00
e2408989a4
GerbView: redraw negative items when visibility changes
2018-02-27 20:59:08 +01:00
37beb726e3
GerbView: Implement in-place GAL layer reordering (for X2 sorting)
2018-02-27 20:59:07 +01:00
eb94d2fcd0
Gerbview: fix an issue when loading files: Layer filenames order in right tab view modified each time a new file is loaded.
...
It creates strange issues (inconsistent layer filenames order, inconsistent items colors) especially with non X2 files.
2018-02-27 19:58:07 +01:00
80035661dc
Use proper path when loading files from Gerber job file
2018-02-26 14:26:58 -05:00
5292829e05
Fix edge case GERBER_FILE_IMAGE creation logic
2018-02-26 14:26:47 -05:00
b03ac1f614
Only update item color when highlighting items in GerbView
2018-02-26 13:48:16 -05:00
449da4303e
Remove more unnecessary calls to RecacheAllItems
2018-02-26 13:47:55 -05:00
319b7cfc67
Remove extra call to SetTopLayer() when switching active layer
2018-02-25 19:19:45 -05:00
4ec7a02ccd
Add a method to conditionally update VIEW_ITEMs (GerbView performance)
2018-02-25 18:20:44 -05:00
d7bb83ddcb
Add a REPAINT flag for faster redraw when bounding box hasn't changed
2018-02-25 18:20:34 -05:00
be8bb24390
Make all new hotkeys editable; label some GAL-only hotkeys
...
Fixes: lp:1751183
* https://bugs.launchpad.net/kicad/+bug/1751183
2018-02-25 17:57:36 -05:00
b90528a7ae
Fix regression in GerbView display settings; some optimization too
2018-02-25 17:35:26 -05:00
9a3ea1d53c
Rename "Render" to "Items" and a few other wording changes
2018-02-23 06:57:27 -05:00
1ed7d5f816
Clear out old layer data when loading on top of an existing image
...
Fixes: lp:1747443
* https://bugs.launchpad.net/kicad/+bug/1747443
2018-02-23 11:59:40 +01:00
f7d0c3997d
Don't recache items unnecessarily when toggling D-code display
2018-02-22 08:52:43 +01:00
0c9d11c180
Add progress reporting for GerbView file loading
2018-02-21 13:17:02 -05:00
4d5e1489fb
New menu structure for ModEdit.
...
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
2018-02-20 10:49:41 -05:00
7e0ff6fe8d
Fix current directory issue loading Gerbers.
...
Fixes: lp:1750361
* https://bugs.launchpad.net/kicad/+bug/1750361
2018-02-19 15:09:54 -05:00
bfa0b98b14
Corrected hotkey description to reflect new canvas naming
2018-02-15 09:30:10 +01:00
4bae901dc8
Centralize zoom-to-fit code.
...
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
2018-02-13 20:06:03 -05:00
1afbfad44a
Use "..." uniformly in menus.
...
See the bug report for some wording changes and a couple of
menu restructurings that were also cleaned up.
Fixes: lp:1597827
* https://bugs.launchpad.net/kicad/+bug/1597827
2018-02-10 17:32:28 -05:00
a35cc44bd1
Change mechanism for updating gerbview toolbar widths
2018-02-06 17:44:15 +01:00
1f487593fa
Respect item polarity when redrawing cached gerber view items
...
Fixes: lp:1746825
* https://bugs.launchpad.net/kicad/+bug/1746825
2018-02-05 07:55:15 +01:00
821668d96c
rename class_collector.h to collector.h
2018-02-04 10:49:37 +01:00
39b4afecfa
fix code after file renaming
2018-01-31 09:24:02 +01:00
5d72aebd22
Fix code after renaming files
2018-01-29 16:40:22 +01:00
a0ac1a48c2
Gerbview: fix code after renaming files
2018-01-29 13:26:58 +01:00
6255239b52
Gerbview: rename files class_xxx to xxx according to the class names of classes defined inside the files
2018-01-29 11:51:47 +01:00
d0754acf00
Fix code after renaming files
2018-01-29 11:37:29 +01:00
14abe8723d
Rework GERBVIEW_FRAME::ReCreateAuxiliaryToolbar to fix layout issues
...
Fixes: lp:1745203
* https://bugs.launchpad.net/kicad/+bug/1745203
2018-01-29 07:52:42 +01:00
4c5bd01887
Rename a few files
2018-01-28 22:02:31 +01:00
899afa1e90
Reinstate OSX cursor shape selection
...
Mark it as not supported in Legacy graphics.
Fixes: lp:1745097
* https://bugs.launchpad.net/kicad/+bug/1745097
2018-01-28 10:47:20 -05:00
d5cdd78062
eeschema: keystroke zoom should obey disabled centering
...
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
2018-01-27 20:20:32 -05:00
61193dcd13
Fix assertion failure quitting gerbview
...
Fixes: lp:1744600
https://bugs.launchpad.net/kicad/+bug/1744600
2018-01-22 21:16:10 +01:00
da305e7750
Move SwitchCanvas() implementation to EDA_DRAW_FRAME
...
Share more code between pcbnew and gerbview. Fix warnings regarding
shadowing EDA_DRAW_FRAME::SwitchCanvas().
2018-01-22 09:06:55 +01:00
b3cb6be48e
Minor memleak fixed in gerbview
2018-01-22 09:04:24 +01:00
5ea277d229
Reset tools when clearing gerber draw layers
...
Fixes: lp:1744600
* https://bugs.launchpad.net/kicad/+bug/1744600
2018-01-22 08:44:55 +01:00
b21f301097
Defer canvas type setting save until destruction of EDA_DRAW_FRAME
...
Fixes: lp:1741787
* https://bugs.launchpad.net/kicad/+bug/1741787
2018-01-18 10:17:06 +01:00
947a4839fd
Use generic Save (and New and Open) commands where unambiguous.
...
Fixes: lp:1743426
* https://bugs.launchpad.net/kicad/+bug/1743426
2018-01-16 08:39:12 -05:00
195b85b0c5
Cleanup of KiCad Icons
...
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
2018-01-12 14:06:45 -05:00
7e6a6540c8
Implement primitive icon scaling for high DPI
...
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
2018-01-10 21:26:06 -07:00
3168d03fe5
Fix unnecessary copy initialization detected by clang-tidy
2018-01-09 18:22:10 -05:00
b98f6a2fd1
Minor fixes in strings and I18N fix.
2018-01-06 10:57:46 +01:00
b98cc0b937
Some coverity fixes
2018-01-05 22:51:03 -07:00
33cbbc95d9
* Gerbview: update a old code in a dialog.
...
Fixes: lp:1741410
https://bugs.launchpad.net/kicad/+bug/1741410
2018-01-05 11:45:50 +01:00
2dec95b4e6
Add a first-run dialog to encourage user to switch to OpenGL
2018-01-04 10:14:40 -05:00
5102c8ac1f
Gerbview and Pcbnew dialog tweaks.
...
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the Gerbview and Pcbnew code paths.
Updated the use of component to footprint where appropriate.
2017-12-27 12:09:56 -05:00
a4528988ca
pcbnew: fix graphical polygon movement, rotation, flipping and edit points synchronization.
...
Fixes: lp:1738449
* https://bugs.launchpad.net/kicad/+bug/1738449
Fixes: lp:1738032
* https://bugs.launchpad.net/kicad/+bug/1738032
2017-12-18 18:25:45 +01:00
a9ccf1161b
Fix quotes in UI messages
...
This replaces all single and angle bracket quotes in UI messages with
double quotes, for consistency.
Sorry to all translators.
2017-12-15 07:33:07 -05:00
1955f25226
Remove outdated check on endAngle to fix arc draw direction
...
Fixes: lp:1737420
* https://bugs.launchpad.net/kicad/+bug/1737420
2017-12-10 11:45:33 -07:00
c0a539959e
Fix a few Coverity warnings
2017-12-04 12:46:11 +01:00
0564d3456b
Preserve color scheme when switching to legacy (Fixes lp:1670669)
...
Instead of modifying the colors when switching to legacy canvas,
they will now be preserved and only returned as the "legacy" colors.
2017-11-28 10:47:04 +01:00
e5847b7953
Gerbview: apply layer colors to GAL after sorting (Fixes lp:1720540)
2017-11-27 08:23:17 +01:00
f7c0562c8b
Gerbview: refinements in D_Code display.
...
Remove duplicate code between legacy and Gal canvas to calculate D_Code id draw parameters.
2017-11-13 11:30:23 +01:00
e14a1656db
Add comments. Gerbview: in legacy mode, do not display D_Code id text when it is too small to be readable.
2017-11-13 09:11:54 +01:00
cabc92bd48
Fix aperture macro and arc bounding boxes (Fixes lp:1730249)
2017-11-13 08:17:43 +01:00
a1acf705e8
Fix aperture macro hit testing (partial fix of lp:1730249)
...
Also update various things in class_aperture_macro.cpp to take a const
parent argument so that it is callable from within GERBER_DRAW_ITEM
2017-11-12 10:22:18 +01:00
652b969193
GTK+ file dialog wildcard improvements.
...
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
2017-11-11 19:32:26 -05:00
69974b73db
Remove some extra semicolons
2017-11-09 19:52:18 +01:00
2b78183bb4
Fix a typo
2017-11-09 19:52:17 +01:00
1959af1ad1
refactoring: forgot to add VIEW/VIEW_CONTROLS initialization in gerber, causig a crash. Fixing.
2017-11-05 22:09:56 +01:00
9932ff32ae
refactoring: wrapped boost::optional in OPT<> class for the purpose of easier transition to C++17 in the future
2017-11-03 23:59:02 +01:00
c536364f05
Fix a few coverity warnings. very minor other changes.
2017-11-02 18:18:57 +01:00
5eb56dd8b0
Coverity fixes
...
CIDs:
102571
168696
168701
168704
168706
168708
168710
168713
168716
168717
2017-11-01 10:24:26 +01:00
3a8b4a2fb7
Fixed a memleak in GerbView
...
Changed m_painter PAINTER* to unique_ptr<PAINTER> to avoid confusion
regarding the objection destruction.
2017-10-30 09:36:34 +01:00
a4440395be
Gerbview: fix zoom to selection tool duplication.
2017-10-30 09:05:35 +01:00
b18cd4cb19
Fix arc drawing algorithm in GerbView GAL (Fixes lp:1720384)
2017-10-26 08:18:09 +02:00
cffe1b51e2
Gerbview: avoid a crash with malformed Gerber files.
...
Fix also incorrect handling of %LN (Load Name) deprecated command
2017-10-24 18:09:33 +02:00
eb2340bc23
Show/Hide icons in menus (according to Icons option) in GAL, like in Legacy mode.
...
Cosmetic enhancement in Gerbview context menu.
2017-10-23 18:48:03 +02:00
3407c6cf27
Gerbview: add icons in a context menu.
...
gal: remove a forgotten debug line.
2017-10-23 16:53:42 +02:00
cdb577bbbc
Gerbview: fix an issue in legacy mode (locate items was not working)
2017-10-23 11:32:05 +02:00
9bd5522419
Add a gerber test file
...
remove a few minor coverity warnings
2017-10-23 09:20:10 +02:00
9b4eddb744
Update gerber job file to latest format
2017-10-20 13:55:42 +02:00
4905bbe500
hotkey management: enhancements in code to know if a hotkey was handled by an event or not.
...
No actual change in key management: in legacy it was partially existing, and not yet used in GAL mode.
2017-10-06 09:23:13 +02:00
4b010ca129
Fix useless trailing and leading spaces in a few messages. Fix also capitalization in a few menus.
2017-10-02 09:25:48 +02:00
d00fc993f3
Fix job file extension.
2017-09-30 09:18:47 +02:00
5731acc97c
Fix typo and and comment
2017-09-29 07:58:15 +02:00
5b2248fad8
gerbview: Corrects handling of %FSD statement
2017-09-29 07:40:58 +02:00
517921e2e1
update doc and remove a outdated file
...
Update or fix a few strings in menus and tool tips
2017-09-28 18:56:36 +02:00
068a29952c
Changed AUI toolbars background from gradient to solid
...
Based on patches from Windsor Schmidt <windsor.schmidt@gmail.com>
2017-09-27 23:23:06 +02:00
4341c0eb2b
Change LOD cutoff for D-Codes
2017-09-26 10:58:03 +02:00
e5df4304a6
Minor tweaks to GerbView for performance
2017-09-25 13:39:38 +02:00
256f52f27e
Use VIEW_GROUP for candidate highlighting; enable in PcbNew also
2017-09-25 13:39:37 +02:00
05a120f09f
Unified {Load,Save]CanvasTypeSetting in EDA_DRAW_FRAME
2017-09-25 13:39:32 +02:00
88cab885af
Code formatting
2017-09-25 13:35:02 +02:00
d87c9f7ed7
Highlight selection candidates instead of using BRIGHT_BOX
2017-09-25 13:35:01 +02:00
b90d86aa2d
Properly update toolbar buttons on application start
2017-09-25 13:35:01 +02:00
cc5c5010f0
Fix some layer visibility behavior
2017-09-25 13:35:01 +02:00
050489d719
GerbView GAL support part 2: New files for GAL
...
- New draw panel
- New painter
- GerbView-specific tools
2017-09-25 13:35:01 +02:00
915e51e1f0
GerbView GAL support part 1: changes to existing files
...
- New GAL draw layers for GerbView
- Improved bounding boxes for Gerber shapes
- Switched to use of SHAPE_POLY_SET for polygons
- Add GAL methods to support selection and rendering
- Add GUI support of editing GAL options
- Rename get/setActiveLayer to Get/SetActiveLayer to match convention
2017-09-25 13:35:01 +02:00
e46fdb0115
Implement OnLayerRightClick for Gerber layer widget
2017-09-22 17:41:42 +02:00
e15acbb00d
Fp editor and board editor have now a separate color setup.
...
fp viewer uses the default colors, because it has no color setup dialog.
class_colors_design_settings: remove not used members.
Fix issue in modedit: the color config was never read.
2017-09-11 18:51:48 +02:00
50164e9968
Add Gerber job file writer in Pcbnew, and a basic reader in Gerbview. Currently disabled
...
Fix also very minor issues in Gerbview
2017-08-30 11:04:33 +02:00
b0bfbd4f41
Gerbview: remove analysis of fully outdated (and never used) gerber commands
2017-08-11 11:21:33 +02:00
32185ddcd3
Multiple improvements concerning colors, configuration handling and legacy features in pcbnew:
...
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
2017-08-04 16:06:57 +02:00
2237de0153
Gerbview "Always hide all layers but active" context menu selection doesn't work with keyboard
...
Fixes: lp:1701008
https://bugs.launchpad.net/kicad/+bug/1701008
2017-06-28 18:32:04 +02:00
996bcdf458
Fix a few doxygen warnings
2017-06-16 09:18:31 +02:00
2476e88c9d
Fix a few doxygen warnings
2017-06-15 13:13:24 +02:00
ad48cd435d
Replace SetToolID( ID_NO_TOOL_SELECTED, ...) by SetNoToolSelected() in code
2017-06-12 16:17:48 +02:00
526b5e2cd3
Fix broken behavior of the "Zoom to selection" tool in Gerbview and Eeschema.
2017-06-10 09:07:17 +02:00
0e71686bfd
Reunion of zoom toolbar buttons.
...
The zoom window toolbar button is on the right toolbar separated from the
other zoom buttons on the top toolbar. Move the zoom window button to the
top toolbar beside the other zoom buttons.
2017-06-06 09:35:20 -04:00
ac9a64a173
general UI fix. Fixed a lot of icons and a lot of menu.
...
Also a few no longer used .cpp icon files are removed.
2017-06-02 11:51:11 +02:00
b8183a1aa5
Fix Coverity warnings
2017-05-30 09:07:18 +02:00
000ee22e39
Drill dialog: creates the directory, when the path entered in dialog does not exist.
2017-05-01 20:42:18 +02:00
afe92c7bfc
Pcbnew: Add creation of Drill Files in Gerber X2 format.
...
Gerbview: add support of drill files in Gerber format.
Fix also an issue in drill dialog: Axis choice is now common to plot a drill files.
2017-05-01 12:43:40 +02:00
e6545ec982
Gerbview: evaluate Aperture Macro Parameters using precedence rules for the arithmetic expressions found in AM.
2017-04-10 18:44:32 +02:00
f007601507
Gerbview: fix an issue (crash or hang) when a aperture macro definition contains ( and ).
...
Note: currently Gerbview does not handle yet operator precedence in aperture macro parameters.
2017-04-09 16:42:17 +02:00
9992a07def
Gerbview: Fix an issue in aperture macro for a Circle AM primitive inside a macro definition
2017-04-08 17:41:53 +02:00
36255d8523
Gerbview: Fix a few issues in aperture macro definitions.
2017-04-08 15:35:11 +02:00
aad80c9bf4
Fix compil issue on Linux
2017-04-08 14:26:32 +02:00
ba517db96c
Gerbview: fix a subtle issue when reading parameter values in Gerber files.
...
In Gerber files the char 'X' is used as separator.
But when reading parameter values, the sequence "0xnnn" is a number in hexadecimal format, and the 'X' char is not seen as separator by usual strtod or strtol C functions.
This is now fixed.
2017-04-08 12:53:40 +02:00
f16f39fd4c
Gerbview: rework on load zip archive: better handling of non ascii7 filenames.
...
non ascii7 filenames of zip files issues are fixed.
There are still issues with non ascii7 filenames inside the zip archives (especially when a zip archive was created on Windows)
2017-03-31 10:55:13 +02:00
3ec28e2acf
Refactor layer enumerations to all live in the same place
2017-03-30 16:01:48 -04:00
b8edecc10f
Move cursor shape flag into GAL settings
...
The motivation here is to concentrate display options in the GAL display
settings, ready for removal of legacy canvases. Instead of having the
property as a member of the DRAW_FRAME, with the GAL canvas retreiving
it from there, it is now in the GAL_DISPLAY_OPTIONS struct, and both GAL
and legacy get it from there.
The options for setting cursor shape are then moved out of the general
options dialog, and into the GAL display options widget, where they can
be used in all GAL-aware programs.
GAL cursor shape works on GAL, but not legacy, so the option is now
available on OSX (but only affects GAL, and is labelled as such).
2017-03-22 10:24:48 +01:00
12c1339296
Remove false "override" comments.
2017-03-06 16:34:56 -05:00
4eeed8d04f
Icons options menu: code rework
2017-03-03 14:18:25 +01:00
e7e972804a
Make show/hide icons in menus a run time option, instead of compil option.
2017-03-02 15:45:54 +01:00
1d039cb4c1
Break row indicators out to own class
...
The introduces INDICATOR_ICON, which is a very simple class holding a
bitmap that can toggle on or off.
The ICON_PROVIDER class then provides icons to INDICATOR_ICONS, which
means the class can be used for more than just row indicators.
A default row icon provider is also provided for use in the standard row
selector.
2017-03-01 09:44:41 +01:00
11dcb76fc9
Add -Wshadow compil option, if exists to warn about shadowed variables.
...
Swig auto generated .cxx file has a lot of shadowed variables, so this option cannot be used to compil all files.
2017-02-23 13:17:23 +01:00
d7bf44eee0
Removed a few more headers from base_struct.h
2017-02-22 17:54:01 +01:00
0dc88bb4cf
Changed COLOR4D defines to static consts
2017-02-22 17:35:00 +01:00
a52250a91e
Change from EDA_COLOR_T to COLOR4D globally; arbitrary color support
...
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
2017-02-22 17:35:00 +01:00
a8eea6155a
Move bitmaps.h out of base_struct.h
...
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
2017-02-21 09:50:15 -05:00
59876c35ae
Gerbview: fix wrong html tag
2017-01-28 10:34:57 +01:00
2f0ab8b13d
Gerbview: Load zip archive: skip files which are not gerber or drill files. Better look of messages.
2017-01-26 18:15:46 +01:00
aac13e7ae1
More detailed error messages when loading Gerber or drill files and if no room to load some files.
2017-01-26 13:16:49 +01:00
361c0c2e21
Gerbview: better management of zip archive. Better error messages.
2017-01-26 11:36:01 +01:00
6329ca5065
Gerbview: add in file menu an option to load a zip archive containing Gerber and/or drill files.
2017-01-26 10:45:28 +01:00
0c459ced97
EDA_TEXT object refactor.
...
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
2017-01-25 08:03:32 -05:00
4ee344e150
Gerber files: Enable net attributes options in plot Gerber dlg and fix net attribute for "no net" tracks and vias (netcode <= 0).
2016-10-23 19:43:31 +02:00
9fdcba8229
Gerbview: Fix 2 (minor) issues in aperture macro "moire". Add a .gbr test file for this aperture macro.
2016-10-13 10:26:49 +02:00
48ed9f080e
Add Help Menu item to open browser at kicad-pcb.org/contribute
2016-10-10 19:01:45 -04:00
15517964c9
Fixes: lp:1630105 (Gerbview print dialog does not display graphic layers list on some windows managers like Unity)
...
https://bugs.launchpad.net/kicad/+bug/1630105
2016-10-04 09:51:35 +02:00
52aa4ecdf4
Unify window title formats
...
Most window titles are now of the format "Application — file [info]",
with adaptations as necessary. Version information has been removed from
titles.
2016-09-26 17:28:25 -04:00
89914fa9de
Fix 2 Coverity warnings.
2016-09-26 19:58:32 +02:00
ad088db6d2
Add more "override" markers.
2016-09-25 13:59:41 -04:00
59c81976dc
Explicitly mark overriding functions.
2016-09-24 14:53:15 -04:00
d42fd751f9
Gerbview print: print now the Gerber filename, the number of pages to print, and a page number
2016-09-21 11:34:18 +02:00
ec3109472a
Correct page numbers on pcbnew multipage print
2016-09-21 09:04:05 +02:00
7ad2f37391
Add %L formatter to worksheets to print layer name.
2016-09-10 14:23:59 -04:00
c8cf78398b
Gerbview: fix a crash when reading polygons with arcs.
...
Fix a very minor other issue (due to a minor bug in wx 3.1)
Displays the full graphic layer name of the selected item in message panel (instead of just the graphic layer number)
2016-09-07 10:28:16 +02:00
9f46d83175
Gerbview: locate item now does not take in account not visible layers. Remove an unused file
...
3d viewer: Remove a few ToUTF8() bad usage (replaced by GetData() )
2016-08-19 09:45:59 +02:00
7909de6127
Gerbview: better management of d_codes list in toolbars.
2016-08-17 10:19:10 +02:00
bfb6e0bbb2
Convert remaining occurences of stri[n]cmp to str[n]casecmp.
...
This also reverses the substitution logic if strcasecmp is missing (config.h.cmake)
2016-08-16 10:27:09 +02:00
f1226afc89
Gerbview: support of %TA.AperFunction (aperture attribute) and better support of %TO (currently work in progress) object attribute.
2016-08-16 12:56:20 +02:00
e5a5f9552b
Fix RS274X Unicode decoding
2016-08-08 13:21:27 -04:00
984146c37d
Gerbview: better support of advanced X2 attributes.
2016-08-01 19:47:35 +02:00
Jeff Young
Seth Hillbrand
Tomasz Wlostowski
Nabeel Ahmad
jean-pierre charras
John Beard
Maciej Suminski
Carsten Schoenert
Jon Evans
Wayne Stambaugh
Marco Ciampa
Clemens Koller
Martin Sivak
Oliver
Chris Pavlina
Camille
Mark Roszko
Simon Richter
Marvin Schmidt
Baranovskiy Konstantin
Seppe Stas
Bernhard Stegmaier
Fabrizio Tappero
Eldar Khayrullin
Dick Hollenbeck
Cirilo Bernardo
Ian Roth