46f7223dd9
Fix sizing of the two last columns in drill statistics table
2022-02-17 14:16:31 +01:00
75bba51b0b
Fix board statistics drill grid column sizing
...
And remove the horizontal scrollbar.
2022-02-17 14:16:31 +01:00
34ed850a23
GERBER_JOBFILE_WRITER: fix missing handling of User_1 to User_9 user layers.
...
Fixes #10878
https://gitlab.com/kicad/code/kicad/issues/10878
2022-02-17 11:48:40 +01:00
71eefc8322
Don't force user to be overly pedantic when writing diffpair rules.
...
(cherry picked from commit fe7e72538e
2022-02-15 20:57:45 +00:00
35968dfe18
DIALOG_PLOT: use a short living quasimodal dialog instead of a long living window.
...
In this case, a quasimodal dialog is the right way.
From master branch, commit 43f5a7c74
2022-02-15 09:24:16 +01:00
6147e997ff
Format string for translation
2022-02-14 09:17:53 -08:00
54a3ca06c0
Pcbnew, DIALOG_GRAPHIC_ITEM_PROPERTIES: fix incorrect test for arcs.
...
It was due to mixing decidegrees and degrees, and seen for 180 deg arcs
Fixes #10841
https://gitlab.com/kicad/code/kicad/issues/10841
2022-02-14 09:46:57 +01:00
0cb82a0985
Import netlist: fix issues: do not read netlist before it is selected.
...
Now the netlist must be explicitly selected and read instead of beeing
read during dialog creation.
It also avoid a useless netlist read when closing the dialog or trying
to change the netlist filename.
From master branch
2022-02-14 08:37:53 +01:00
30276fb5f7
update custom rule syntax help to make diff pair rule examples clearer
...
(cherry picked from commit 4442f76add
2022-02-13 20:15:47 +00:00
f37531ed39
Fix repaints getting done after the wrong dialog.
...
(cherry picked from commit b7c9a1ad55
2022-02-13 18:37:44 +00:00
fd4ac7c5df
Error messages for zone merging.
...
Also fixes a bug where zones meeting at a point would get merged
resulting in a self-intersecting zone.
Also fixes a bug where undo would not be handled correctly when zones
could not be merged.
Fixes https://gitlab.com/kicad/code/kicad/issues/10466
(cherry picked from commit d5a2059c21
2022-02-13 18:30:32 +00:00
f561f85ebb
Move CN_VISITOR from HitTest() to Collide().
...
The former isn't sufficiently aware of layer differences (such as for
pads with some layers unflashed).
(cherry picked from commit 6e063247e5
2022-02-13 18:22:18 +00:00
7cba8e847d
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
(cherry picked from commit 8dcc933fc3
2022-02-13 18:20:31 +00:00
7c910c2d0b
fix-npth
2022-02-12 11:56:46 +01:00
861589d837
Use wxEmptyString instead of wxT( "" )
...
Also fixes places where ternaries did autopromotion instead of returning
an empty wxString
2022-02-09 10:33:52 -08:00
8fc831cbc2
Validate arc output when editing
...
Handles checking output of the arc to ensure we don't end up generating
an invalid arc. Also keeps the limit of the arc angle to be (360,360)
excluding 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/10070
2022-02-06 17:18:04 -08:00
3af606a020
Wide string decls for gerbview.
2022-02-05 19:59:29 +00:00
f412d8d461
CADSTAR: Fix potential nullptr dereferencing bug
...
Don't assume the footprint will have the pad index that the file references.
2022-02-05 19:22:05 +00:00
71bcc9883a
Fix typoed test condition for TH no hole pads PVS V501
...
(cherry picked from commit b9f1aaf029
2022-02-05 18:32:08 +00:00
be958e3fdb
Avoid potential divide by zero in footprint spreading PVS V609
...
(cherry picked from commit 8588bea4b2
2022-02-05 18:31:00 +00:00
b2c99dd953
Fix some leaking objects identified by PVS Studio V773
...
(cherry picked from commit a7ebfc31f9
2022-02-05 18:30:24 +00:00
471c0c4c1d
More wide-string declarations.
2022-02-05 13:29:00 +00:00
9e5e46514d
More wide-string declarations.
2022-02-05 13:29:00 +00:00
ba70f202ce
Fix a compil issue.
2022-02-05 11:16:56 +01:00
4657614e4f
More wxString wide literals.
2022-02-04 23:12:09 +00:00
2365c1e96f
Add duplicated items to parent group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10155
(cherry picked from commit 42917874dd
2022-02-04 18:14:25 +00:00
430c4862b6
Log an undo item when filling zones.
...
If we wanted to put it into the parent's undo item, then the *parent*
would need to not start a new undo record. Not starting one in the
zone filler tries to add it to the *previous* change, not to the parent
change.
Fixes https://gitlab.com/kicad/code/kicad/issues/10091
(cherry picked from commit 4cc1ced2f3
2022-02-04 18:14:25 +00:00
4c81307391
Allow dialogs to force evaluation of UNIT_BINDER
...
When setting previous values, we don't get the "OnFocus" event, so the
evaluation would not get triggered by simply repeating (using the
keyboard)
Fixes https://gitlab.com/kicad/code/kicad/issues/10752
2022-02-04 10:03:23 -08:00
50d3a507d0
Mark some limits as constexpr
...
gcc doesn't need it and computes during compile regardless, but experimenting in godbolt, both clang and MSVC actually do need it or else it's partially computed at runtime
(cherry picked from commit ca7840334c
2022-02-04 12:50:54 +00:00
69b69aa431
Update text variables when they change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10734
2022-02-04 00:34:20 +00:00
0a13f15a9d
Ensure we can version scripting properly
...
Adds Version() and FullVersion() calls to support reporting version to
scripts and scripting window
Fixes https://gitlab.com/kicad/code/kicad/issues/10079
2022-02-03 15:54:07 -08:00
ef94f31204
Update error message to match new arc dialog
...
We now provide arc end points and interior angle, so we cannot check for
null radius in the same fashion. Instead, the starpoint==endpoint
indicates a zero radius
Fixes https://gitlab.com/kicad/code/kicad/issues/10714
2022-02-03 14:31:58 -08:00
7601a3385f
Convert strings to wide when using wxString routines
...
WxString does not allocate space for wide strings needed during
conversion unless the string is explicitly wide. This can cause buffer
over/underflow
Fixes https://gitlab.com/kicad/code/kicad/issues/10605
2022-02-03 13:08:07 -08:00
901685f01b
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
2022-02-03 10:34:14 -08:00
b883eee911
Use superclass's copy c'tor from within subclass copy c'tor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10481
(cherry picked from commit 8c758aeeb5
2022-02-03 15:00:39 +00:00
2425444947
Map zone layers before checking their visibility.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10509
(cherry picked from commit 09d0f6e17c
2022-02-03 15:00:39 +00:00
66e12af548
Expand text vars in titleblock before exporting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10197
(cherry picked from commit 407660201e
2022-02-03 15:00:39 +00:00
ea38056e33
Resolve textvars in plot directory.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10405
(cherry picked from commit e5d5ee07f0
2022-02-03 15:00:39 +00:00
c805144c08
Support (and save/recall) zoom in/out in Custom Rules editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5796
(cherry picked from commit 0036f44e37
2022-02-03 15:00:39 +00:00
6d84acfacd
Handle invalid pads more gracefully
...
Pads generated outside of KiCad may have self-intersecting polygons that
simplify to multiple sets. We handle this by adding multiple primitives
for such polygons and limiting our fracture calls to only polygons that
have holes
Fixes https://gitlab.com/kicad/code/kicad/issues/10712
2022-02-02 13:36:24 -08:00
169881dcf1
EAGLE plugin: use specified RATIO value for text size calculation
...
(cherry picked from commit 61b2b0ff0c
2022-02-02 08:48:25 -08:00
3d11ce5139
export D356 netlist: fix incorrect id for pads type connectors.
...
these pads are similar to SMD pads and should have the same id.
Fixes #10694
https://gitlab.com/kicad/code/kicad/issues/10694
2022-02-01 08:45:02 +01:00
833ce19221
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-31 16:09:14 -08:00
42dfdf8c38
PCB_CONTROL::unfilledZoneCheck(): skip rule areas: they are not filled by definition.
...
Fixes #10691
https://gitlab.com/kicad/code/kicad/issues/10691
2022-01-31 17:04:05 +01:00
26dfc4477f
PCB_TARGET: add missing TransformShapeWithClearanceToPolygon() method.
...
From Master branch.
2022-01-29 20:07:14 +01:00
38a4894d92
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-29 07:07:03 -08:00
c2707f3cc0
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
2022-01-28 17:07:11 -08:00
8753051db6
Don't count zero-length as duplicate
...
We were checking for duplicate tracks by looking to see if the two
tracks had two shared points. A null track always matched this case,
which removed the valid track. We solve this by avoiding null tracks in
the duplicate checker. They are removed separately in the null track
stage.
This also fixes a GTK-specific tree issue where we require the
BeforeReset()/AfterReset() calls instead of Cleared() to prevent GTK
from dereferencing a parent after freeing
Fixes https://gitlab.com/kicad/code/kicad/issues/10624
2022-01-28 16:34:00 -08:00
8ae304dcca
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
2022-01-28 15:18:42 -08:00
796893de56
Fix negative arc angles in PCAD import
2022-01-28 10:18:17 -08:00
3f6a4296d9
Pcbnew, export svg: Fix incorrect saving of layer set.
...
From Master branch
2022-01-27 13:07:40 +01:00
60ae18893e
PCB_POINT_EDITOR: fix missing init of PAD pos0 after changing
...
(From Master branch)
2022-01-22 10:43:23 +01:00
d6c4215a1f
pcbnew: EAGLE importer does map value to wrong layer if nothing is defined in original EAGLE footprint
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10311
(cherry picked from commit 55b782d66e
2022-01-21 13:16:41 -08:00
c02cadec2a
Exclude rules which match no enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10227
(cherry picked from commit 0967cc82e2
2022-01-21 15:06:18 +00:00
b608ebd058
Don't findnext on an empty string; show the dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10313
(cherry picked from commit 60fc75e239
2022-01-21 15:05:27 +00:00
6d7659fb20
Flip arc endpoints when mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10550
(cherry picked from commit 7f6bc28f87
2022-01-21 15:02:15 +00:00
dd7029ea07
Always use the project directory for default save
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10478
2022-01-20 11:51:16 -08:00
da28ade004
Footprint editor: use most recently used path on footprint import.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10418
(cherry picked from commit c154e85ebd
2022-01-16 09:48:21 -05:00
2306d00c89
Do not check key states for non-key events in TryBefore
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10127
2022-01-13 22:28:45 -05:00
20bbf9b179
PNS: Do not clear layer pairs when importing new sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10225
2022-01-13 20:37:37 -05:00
cf4d46b24d
PNS: Do not allow smart pads when in 90-degree mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10386
2022-01-13 20:21:19 -05:00
739c14eaa2
FOOTPRINT::GetProperty() swig extension
...
(cherry picked from commit 33a4c9b08e
2022-01-13 13:10:44 -08:00
adfbfc27af
Footprint editor: fix Eagle plugin footprint library layer mapping bug.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10354
(cherry picked from commit a77b5649cc
2022-01-12 20:52:55 -05:00
57d58fe335
Handle Unicode clipboard data in pcbnew and symbol editor
...
Fixes #10323
(cherry picked from commit 8373180cbb
2022-01-12 09:23:24 -08:00
b2ecf097ed
Include Footprints within Groups when re annotating duplicates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10329
(cherry picked from commit de7158b80e
2022-01-11 20:52:01 +00:00
8dca61ce9c
Fix copy-paste error
2022-01-11 06:08:15 -08:00
bd7841bf96
Handle arcs in global track width changes
...
Also add defensive code against invalid indices
Fixes https://gitlab.com/kicad/code/kicad/issues/10325
2022-01-10 17:19:49 -08:00
a74d1d9962
Keep ratsnest setting when pasting
...
Paste items should copy the global ratsnest visibility setting
Fixes https://gitlab.com/kicad/code/kicad/issues/10346
2022-01-10 12:48:03 -08:00
4d899d7820
Remove default hotkey for toggle zone display
...
It is too easy to accidentally hide your zones and the 'A' hotkey is
intuitively mapped to Add Footprint, to match Add Symbol in eeschema.
This won't change current hotkey customizations but will help prevent
future user error. Users can still map the action to a hotkey if the
new toggle is useful to their workflow
2022-01-10 11:48:26 -08:00
4907b90215
Fix FP circle validity check
...
Radius is encoded by m_endX
Fixes https://gitlab.com/kicad/code/kicad/issues/10337
2022-01-10 10:54:23 -08:00
bbf00e0461
Pcbnew: honor footprint exclude from BOM setting.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10297
(cherry picked from commit f379c49084
2022-01-09 11:30:06 -05:00
76f21d950d
Ensure LIB_TREE cleans up while frame still exists
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10266
2022-01-08 17:32:17 -05:00
bfca928900
Plot pads in layer color
...
v6 pads are not allowed to be a different color from the rest of the
copper layer, so don't query the GAL layer for a color
Fixes https://gitlab.com/kicad/code/kicad/issues/10293
2022-01-07 08:55:59 -08:00
4bcfa8df1f
Template for vector<VECTOR2I> in swig
2022-01-06 23:48:52 -05:00
78e737b9d8
DRC scripting: load project from board if possible
...
s_SettingsManager is not always initialized when the WriteDRCReport is
run. We should first attempt to extract the project from the actual
board being checked. Failing that, we fall back to the static settings manager and then exit if we don't have a project associated.
Fixes https://gitlab.com/kicad/code/kicad/issues/10221
2022-01-06 11:50:21 -08:00
362eedc510
pcbnew: EAGLE plugin is case sensitive to >VALUE / >NAME
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10253
(cherry picked from commit 82f147ecef
2022-01-05 08:07:41 -05:00
11402e2db1
pcbnew: fixing eagle_plugin with empty class names
...
Fixes #10229
https://gitlab.com/kicad/code/kicad/issues/10229
(cherry picked from commit a5307c6f59
2022-01-05 07:22:01 -05:00
f9d8ec6137
Handle footprint shapes in polygon creation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10259
2022-01-04 21:31:22 -05:00
e9b91b6fab
Fix creating polygons from footprint rule areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10257
2022-01-04 21:28:04 -05:00
873353d8d7
Prevent clipping by default
...
The text bbox inflation from fb4343bchttps://gitlab.com/kicad/code/kicad/issues/10033
2022-01-04 12:11:23 -08:00
dec310f7f8
altium: Fix board outline import with arcs using SHAPE_LINE_CHAIN instead of a hack
2022-01-04 19:57:26 +01:00
ca8cf14dff
Fix missing FOOTPRINT cast in swig
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10236
2022-01-04 10:49:29 -08:00
ed9a3deb57
Fix pad snapping in renumber pads
...
Snap shouldn't be looking for other items in this routine or using the
grid
Fixes https://gitlab.com/kicad/code/kicad/issues/10238
2022-01-03 17:18:03 -08:00
1874ad2f7e
Catch errors from `load()`
...
Loading footprints may throw in some cases. We need to catch these
nicely without breaking out of the full loading process
Fixes https://gitlab.com/kicad/code/kicad/issues/10213
2022-01-03 15:30:20 -08:00
45182febaf
Exit router and invoke edit tool when attempting to drag an arc track
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10208
2022-01-02 16:10:26 -05:00
134b09004b
Fix highlighting color logic when net colors are active
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10157
2022-01-02 12:11:24 -05:00
c52421869a
Fix saving of existing appearance presets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10166
2022-01-02 11:59:19 -05:00
bd75cffff3
Prevent ops on empty selection
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10164
2022-01-01 15:28:47 -08:00
cbdfb5d396
Remove the unused updateui in the selection filter base
...
(cherry picked from commit e75d283007
2021-12-30 17:18:38 +00:00
11c967b259
pcbnew: Add via height support in drc length
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10135
2021-12-30 14:34:44 +00:00
0ec440805d
Tune connectivity progress reporter
...
We don't need quite as many updates, this helps speed a little
See https://gitlab.com/kicad/code/kicad/-/issues/10154
2021-12-30 09:16:19 -05:00
67fe8904c0
Add win32 VERSION_INFO resource blocks for the DLLs
...
(cherry picked from commit 3f711b8958
2021-12-29 04:56:26 +00:00
cc84344499
fix in pcbnew/python/swig/units.i ... added error handling
...
Added error handling in unit conversions for the pcbnew python bindings.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10081
2021-12-28 07:21:35 +00:00
b7ec594c0a
Use the correct parent for the root node placeholders of board setup
...
(cherry picked from commit 38842647b8
2021-12-28 01:16:05 +00:00
ceb4d08ce9
Fix race condition with ShowEventCounters on Windows
...
(cherry picked from commit 3dd8c57bdd
2021-12-26 13:33:18 +00:00
b95032901e
pcbnew print: minor fix: option edge.cut on all layers not stored. Fixes #10046 https://gitlab.com/kicad/code/kicad/issues/10046
2021-12-23 18:36:42 +01:00
753e08a944
Use ChangeValue() instead of SetValue() in some wxTextCtrl (It avoids generating unused events)
2021-12-23 18:36:42 +01:00
da5f2366f9
PANEL_SETUP_BOARD_STACKUP: fix a typo that prevent displaying a color swatch. Fixes #10027 https://gitlab.com/kicad/code/kicad/issues/10027
2021-12-23 18:36:24 +01:00
93c48b9d46
Hot-update units in track editing dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10099
(cherry picked from commit 4e8a7fc911
2021-12-23 17:01:44 +00:00
1b033d56a7
Improve clean up tracks & vias algorithm for neck-downs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10098
(cherry picked from commit d5a5928e5a
2021-12-23 17:01:39 +00:00
ad583eab13
Add hot-updating of units in common wxGrids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10020
(cherry picked from commit 6e2460ad37
2021-12-23 17:01:34 +00:00
0d3246e3ab
Don't commit zone refill if there were no changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10085
(cherry picked from commit 77239591c0
2021-12-23 17:01:31 +00:00
76fd029cd6
Don't leave stranded symbols/footprints in editors when doc closes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10026
(cherry picked from commit 9af33cdfe8
2021-12-23 17:01:25 +00:00
1dc78c4adc
Tidy up pad & parent footprint selection corner cases.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9923
(cherry picked from commit d9dba2edb2
2021-12-23 17:01:19 +00:00
9cb36e5bc5
Restore units to a bunch of wxGrids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10063
(cherry picked from commit 8b52e969d6
2021-12-23 17:01:10 +00:00
b6ff44cccf
Fix failure to remove hover selection after rotate operation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10058
(cherry picked from commit f696c4ddfc
2021-12-23 17:01:06 +00:00
e9e742816d
Scale markers somewhat proportionally to zoom.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10048
(cherry picked from commit a1c8e36c99
2021-12-23 17:01:01 +00:00
bd0fbea044
Handle 360° arcs on import as circles
...
KiCad breaks a bit when dealing with 360° arcs, so convert them to
circles on import. The break happens when converting to polygons for
viewing, the arc is passed from start->mid->end format to
center->start->angle format. At 360°, the angle is normalized to 0
2021-12-18 18:44:20 +00:00
a17a58203b
Preserve legacy dimension information.
2021-12-17 23:31:37 +00:00
699ba78b74
Fix legacy (pre-sexpr) board importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10025
2021-12-17 17:21:31 +00:00
1610195a09
Coverity fix
2021-12-15 23:17:04 -05:00
57af990066
router: fix layer switch issue when starting a track on via without fixed segments
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9915
2021-12-16 00:55:17 +01:00
20dcf43fdd
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10009
2021-12-15 23:39:24 +00:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
97c2627de6
router: added missing case items (fixes regression in component dragging)
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10010
2021-12-15 23:18:55 +01:00
24fe5bc2a8
Fix DRC thread locking
2021-12-15 06:05:40 -08:00
dadaf26ff1
Board Setup: Ensure board editor layers page always gets updated
...
We need to update it even if we move to a different page, as when moving
back to the physical stackup page it will reset the layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9991
2021-12-15 10:39:44 +00:00
40d44c94cd
Fix single-threaded loads/connectivity
...
We cannot set thread counts to hardware_concurrency()-1 without
considering that single core machines will get a thread count of 0.
2021-12-14 17:18:46 -08:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
aa64b739eb
Board stackup: Ensure that m_choiceCopperLayers is updated
...
Need to do a full synchronisation with the board to ensure that the
drop down and other UI elements are reset
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9991
2021-12-14 18:00:07 +00:00
78ff9a857a
Jerry-rig HTML-format alpha parsing
...
On wx3.0, the HTML format #RRGGBBAA cannot handle the alpha channel.
Instead, we route this through a COLOR4D routine when we need to use
these colors
Fixes https://gitlab.com/kicad/code/kicad/issues/9963
2021-12-13 16:04:40 -08:00
348c2bc612
Fix another wxUpdateUIEvent retrigger loop.
2021-12-13 18:43:30 -05:00
755607b8f8
Fix a few wxUpdateUIEvent retrigger loops.
2021-12-13 15:46:13 -05:00
4c565fd222
Top layers includes a whole bunch of layers...
...
... and the first isn't particularly meaningful. Use GetActiveLayer
instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/9972
2021-12-13 18:23:18 +00:00
8e5f929724
Fix default reference text copy for new footprints
2021-12-13 14:42:14 +00:00
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
88fc6d25a7
Correctly handle deleting multiple selections in some grids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9952
2021-12-12 17:28:17 +00:00
779629ad33
Fix deadlock
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9959
2021-12-12 07:20:03 -08:00
c360bbba20
Browse footprint libraries now remember window-size and position
...
(resolveCanvasType() saves the settings, so it must come after they are loaded)
Fixes #9935
https://gitlab.com/kicad/code/kicad/issues/9935
2021-12-12 09:02:15 +01:00
f2639e2928
Reverse sort order for net id in inspector
2021-12-11 23:12:47 +00:00
758ce43d9c
Lock Connectivity Data when resetting
...
When we reset m_connAlgo, we need to lock the data mutex otherwise,
yields to the system may sometimes issue calls back to invalid data
until m_connAlgo has finished rebuilding
Fixes https://gitlab.com/kicad/code/kicad/issues/9922
2021-12-11 15:11:10 -08:00
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
84e0feeee6
LibTree selection should follow footprint after Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:45:21 +00:00
4f60d7ac78
Don't use lib tree target if lib tree isn't shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:34:22 +00:00
62e6f542ed
Init zone type when creating in convert tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9918
2021-12-09 18:20:30 -05:00
196571d004
Fix edge case in re-enabling auto track width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9887
2021-12-09 18:07:05 -05:00
9884f40952
Update call signature for SwitchLayer
...
We don't use DC anymore
2021-12-09 10:14:11 -08:00
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
f2d6251979
PCB_EDIT_FRAME: very minor fix: make the frame title translatable in stand alone mode
2021-12-09 14:39:27 +01:00
48e95dcf7e
Disable custom track/via width when re-enabling connected width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9887
2021-12-08 21:13:34 -05:00
a9168860e0
Reduce excessive epsilon in polygon search algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9903
2021-12-08 21:04:23 -05:00
622d0fc896
Re-add code to refresh plugins at each frame load
...
Should now be safe
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9781
2021-12-08 20:48:35 -05:00
587ee890d9
Move where flag is cleared to catch more cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:46:53 -05:00
44e01dcd0a
Skip newly-added footprints in connectivity
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:39:12 -05:00
e9847cf2bd
Exclude vias from first 'U' step.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9902
2021-12-08 23:16:33 +00:00
1f9e75f676
Pad with hole same size or larger than pad isn't flashed.
...
... even if it's marked as being on copper layers.
Also changes the default hole clearance to 0.25mm.
Fixes https://gitlab.com/kicad/code/kicad/issues/9901
2021-12-08 23:16:33 +00:00
df1e74d418
Clean up dead code from last commit.
2021-12-08 23:16:33 +00:00
7ffd43a6f4
Regularize the promotion of pads to footprints in non-free-pad mode.
...
Also regularizes some of the other selection filtering options.
This also fixes an invalidated iterator (and subsequent segfault) in
the old code.
Fixes https://gitlab.com/kicad/code/kicad/issues/9896
2021-12-08 13:08:54 +00:00
1160bd94b0
Scale vertex lineweights in DXF import
...
DXF lineweights are always in 100th of mm, so scale the set weights on
import
Fixes https://gitlab.com/kicad/code/kicad/issues/9854
2021-12-07 16:23:44 -08:00
63f67b7e5b
Fix loading netclasses from legacy boards via Python
2021-12-07 18:55:08 -05:00
9c619d8f4e
Allow some navigation tools when selecting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9565
2021-12-07 23:00:39 +00:00
a7193e0932
Do not warp cursor to last location when footprint/text placement is activated from toolbar/menu.
...
Also makes the footprint appear instantly after closing the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9840
2021-12-07 22:48:56 +00:00
fbdb2bd91f
Fix broken refactor from 0e65fe5
...
'auto' here was utilizing a copy constructor to avoid assigning a new
value to the underlying shared pointer
2021-12-07 12:38:05 -08:00
c613f5e2f1
Convert DXF arcs in fp space
...
Once the arcs are set in pcbnew, they have integer representation and
can accumulate rounding errors. So we convert the start/end points in
the importer to ensure that the connected points in a DXF remain
connected
Fixes https://gitlab.com/kicad/code/kicad/issues/9827
2021-12-07 10:53:35 -08:00
84cdc9701f
Partially reverts d877f041
...
Based on discussion in https://gitlab.com/kicad/code/kicad/-/merge_requests/1029
we will keep the original behavior. The new routines to get stock paths
are still useful (possibly in scripting) and are kept
2021-12-06 16:14:40 -08:00
73b39e836d
Set modify bit when editing page layout.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9891
2021-12-06 23:08:33 +00:00
2446844cd3
Fix bugs in free-pad logic.
...
Don't promote pads to parent footprint selection when NOT in free
pad mode during move.
Implement move algorithm in rotate.
Fixes https://gitlab.com/kicad/code/kicad/issues/9893
2021-12-06 22:53:45 +00:00
d00810c0fb
Pcbnew: make search field focused by default in Find dialog
2021-12-06 19:08:23 +00:00
04b0435c45
Snap to pads when placing via
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9873
2021-12-06 15:54:49 +00:00
95087c6de5
Fix clearance outlines for router head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9885
2021-12-06 15:51:53 +00:00
34a0d1947a
pcbnew Flip: Filter selection for free pads, select footprint instead
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9875
2021-12-06 14:34:26 +00:00
18ba6b4de8
Fix PCB_TEXT hit test, take two
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9866
2021-12-06 01:05:37 +01:00
d0e9d4868c
Fix PCB_TEXT hit test when bounding box is rotated
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9866
2021-12-06 00:52:07 +01:00
014bad7b28
Add profile counters for PCB mouse and paint events
2021-12-05 15:16:08 -05:00
5ba215c8ea
Use actual width when previewing PNS lines
2021-12-05 13:41:39 -05:00
7de9e48b57
PNS: Fix tuning calculations through locked segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9727
2021-12-05 13:35:28 -05:00
8caf62803d
Avoid unnecessary newlines and extra spaces when saving polygon shapes
...
Also minor formatting / code style fixes.
2021-12-03 22:04:55 +00:00
c186d1f319
Force refresh AUI manager after reloading python scripts.
...
Because the tools in the Htoolbar can have changed, the AUI manager need refresh.
2021-12-03 09:30:24 +01:00
01eebd0b9d
Do not call callLoadPlugins() every time a SCRIPTING_TOOL is created.
...
(i.e. from board editor and from fp editor)
Once is enough.
Once plugins are loaded, calling LoadPlugins() from fpeditor disable plugins
in board editor
Fixes #9846
https://gitlab.com/kicad/code/kicad/issues/9846
2021-12-03 08:12:06 +01:00
65c0e0cd18
resolveCanvasType saves the settings, so it must come after they are loaded
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9799
2021-12-03 01:43:53 +00:00
d877f04198
fixe paths
2021-12-02 20:23:00 +00:00
f8d61d689b
Fix annoying wxWidgets assert.
2021-12-02 16:56:47 +00:00
46a8d23378
Remove narrowing implicit cast
2021-12-02 16:35:35 +01:00
5cb2641142
Fix nullptr dereference in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9844
2021-12-02 13:20:44 +00:00
0e65fe5d8d
Coding standards and commenting.
2021-12-01 23:15:37 +00:00
a596a1f2e2
ROUTER_TOOL needs to handle pads not handled by router itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9839
2021-12-01 22:25:02 +00:00
3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
58189dca7a
Always focus on center of small things.
2021-12-01 19:44:30 +00:00
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
c4a6a61743
Don't truncate values on import
...
Leads to off-by-one errors when converting to internal values
Fixes https://gitlab.com/kicad/code/kicad/issues/9827
2021-11-30 16:10:56 -08:00
515aed7408
Make Clone functions for NETINFO_ITEM and PCB_MARKER
2021-12-01 00:47:22 +01:00
5dcd6f89d3
Don't register DRC error on internal approximation
...
Users can set the internal approximation of curves, which will create
small errors off of ideal locations. This will cause DRC errors on some
items such as rounded rect pads when elements are routed at the minimum
ideal distance. Users could already tune this value using the Advanced
Config values but we'd rather the user not depend on that.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9833
2021-11-30 15:28:20 -08:00
3af65936c1
Don't consider heatsink, castellated or fiducial pads for THT vs SMD.
...
Also fixes a bug where the Footprint Checker's marker list wasn't cleared
correctly from the last run.
Fixes https://gitlab.com/kicad/code/kicad/issues/9821
2021-11-29 16:45:42 +00:00
3218665861
Revert "Sync action plugins every time PCB frame is created"
...
This reverts commit 69566b25b1https://gitlab.com/kicad/code/kicad/-/issues/9798
2021-11-28 16:16:14 -05:00
3886e681ae
PAD Copy CTOR: fix missing copy of m_pinType member.
2021-11-28 14:34:26 +01:00
f5246acf37
PCB_PAINTER: draw PAD do not always replace netname by "x".
...
When a pad net is edited inside the board editor, its netname is no longer
its corresponding pin netname.
Fixes #9795
https://gitlab.com/kicad/code/kicad/issues/9795
2021-11-28 14:34:26 +01:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
b0d7c1a810
Don't leave orphaned nets in pads after editing in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9789
2021-11-27 12:34:41 +00:00
b8b8c0d34c
dialog text properties: fix a focus issue.
...
Fixes #9792
https://gitlab.com/kicad/code/kicad/issues/9792
2021-11-27 10:08:30 +01:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
6f0a4ccdee
Formatting.
2021-11-26 18:14:29 +00:00
69566b25b1
Sync action plugins every time PCB frame is created
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9781
2021-11-26 09:58:48 -05:00
99ec2b1801
Don't hide original object when highlight is only part of it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9772
2021-11-25 23:42:13 +00:00
da458535c4
PNS: Avoid flickering clearances on new items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:38:04 -05:00
63718323bc
PNS: Holes need to be moved with solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9773
2021-11-25 15:31:18 -05:00
8026863d4c
Use progress reporting in more places when loading a board
...
Prevents application-not-responding events while opening large designs
2021-11-25 11:19:03 -05:00
b4342d813b
Fix SHAPE_LINE_CHAIN::Slice when end is an arc followed by a point
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9770
2021-11-25 10:05:33 -05:00
ade8fe4333
When dragging footprints pads with holes also need to be taken along.
...
Otherwise (aside from not colliding with their dragged location) we
won't update their locations and then if they happen to be the first
pad in the footprint we'll try to update the footprint's location post-
drag with the pad offset (which will be {0,0}.
This is easily reproducible with the test document in the bug in the
"fixes" statement.
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
f9e1429c60
Naming conventions.
2021-11-25 14:54:12 +00:00
5985a21b74
Offset internal items by drag amount.
...
Some tools move only preview items while keeping the real items
hidden. Those tools must use this new offset parameter.
Other tools move the real items. Those tools can ignore this
parameter (which will default to {0,0}).
Fixes https://gitlab.com/kicad/code/kicad/issues/9391
2021-11-25 14:54:12 +00:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
6ecdbbb1da
Remove some duplicate work when loading a board
2021-11-24 22:04:16 -05:00
06f206104d
Pcbnew: fix chamfered rectangular pad definitions in GenCAD exporter.
...
The pad comparison function was never updated when chamfered rectangular
and custom pads were added so if more that one variant of either of those
pad types existed in a design, only the first one would get generated and
assign to every pad of that type.
The custom pad primitive comparison has not be implemented so the exported
designs may be broken for custom pads.
2021-11-24 12:54:44 -05:00
c0fdac2774
DIALOG_TRACK_VIA_PROPERTIES: Do not use wxcombobox selection as temporary variable.
...
Fixes #9746
https://gitlab.com/kicad/code/kicad/issues/9746
2021-11-24 17:36:10 +01:00
b6ea9afb4f
DIALOG_PAD_PROPERTIES: fix 2 issues: missing initial value for roundrect corner radius
...
and missing resize pad display panel (minor cosmetic issue).
Fixes #9755
https://gitlab.com/kicad/code/kicad/issues/9755
Fixes #9703
https://gitlab.com/kicad/code/kicad/issues/9703
2021-11-24 09:44:13 +01:00
f97c7c78c8
Connect ruler tool with axes preferences
...
Adds "UpdatePreferences" action that is called when the preferences are
updated, allowing running tools to act on changes that may affect them
Fixes https://gitlab.com/kicad/code/kicad/issues/9737
2021-11-23 12:52:21 -08:00
1c3e1df3ca
Not all holes are round.
...
We currently only need this to work for vias as we're a long way
from being able to support it for pads, so just check the hole
shape.
Fixes https://gitlab.com/kicad/code/kicad/issues/9735
2021-11-23 14:36:05 +00:00
e56e61ffb5
router: fix typo in the DP tuning fix patch
2021-11-23 00:21:38 +01:00
126563c839
Fix initilization project / ordering
...
We cannot resolve the Canvas type without the canvas being initialized.
But saving settings sometimes requests canvas access. This protects the
calls against failure by checking for canvas before saving
canvas-specific settings
Fixes https://gitlab.com/kicad/code/kicad/issues/9729
2021-11-22 11:47:42 -08:00
5060c73625
Reject broken footprint files
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9721
2021-11-22 16:48:05 +01:00
89228e1ebe
router: increase parallelity detection threshold for AssembleDiffPair()
...
Partially fixes the misrecognized diff pairs issue.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8567
2021-11-22 01:35:12 +01:00
8777ce3d4e
TEMP_SELECTED is in m_flags, not m_status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 23:52:45 +00:00
e60386f028
router: disable 'limit corner count' optimization for via dragging
...
It seems to be completely preventing optimization instead of preventing over-optimization in case the head is a dragged via.
To be investigated in more details in V7.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
ccf9a72078
router: fix ghost dots issue in router preview items
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8665
2021-11-22 00:05:17 +01:00
3f2d86adec
Make OpenGL default for all apps
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9699
2021-11-21 12:33:07 -08:00
bbafce6ab3
PNS: Don't clip the line in the middle of an arc - just start again
...
In shove mode, returning an empty line results in keeping the current
head, which should be okay for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2021-11-21 19:53:03 +00:00
4e0ad07eb0
PNS::Shove Add margin when generating hulls for arc segments
...
Partially fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
There is still a case where if the shover does not find a solution,
we try clipping the arc and it still collides.
2021-11-21 17:13:21 +00:00
90157db537
PCB_PARSER: add timeout for of 100 ms for refreshing the progress window.
...
The previously used line number threshold was causing (on some systems) severe slowdown in loading
due to relatively long redraw time of the progress bar window.
2021-11-21 17:33:59 +01:00
b1878fcc54
ClipVertexRange: fix fallout of NextShape API change
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9711
2021-11-21 11:03:22 -05:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
cf1d5f5724
Teach selectConnectedTracks() about layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 13:53:43 +00:00
229706b48a
Formatting.
2021-11-21 13:53:43 +00:00
c40e921cb3
router: remeber to make a shove lockpoint when placing a lone via
...
Note to self: works around a possible bug in CommitPlacement()/RewindToLastLockedNode()
fixes: https://gitlab.com/kicad/code/kicad/-/issues/9695
2021-11-21 00:18:20 +01:00
c1703212dc
"Document" properties go in File menu; Edit menu is for item props.
2021-11-20 22:44:43 +00:00
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
1f4858c314
Show holes in router preview items for vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9658
2021-11-20 12:21:24 +00:00
766a09c338
Remove autocomplete when we lose focus
...
Prevents the excess dropdown from persisting over windows
Fixes https://gitlab.com/kicad/code/kicad/issues/9651
2021-11-19 17:24:16 -08:00
7529eb1812
SWIG out connected item vector for use
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8566
2021-11-19 13:39:06 -08:00
c01649fc6e
Make it easier to open legacy files.
2021-11-19 13:36:14 +00:00
d76c6bc884
Add NewBoard API to allow standalone BOARD creation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9687
2021-11-18 21:43:05 -05:00
c5ddb8de26
Hide confusing lowercase version of GetCenter from SWIG
2021-11-18 21:21:22 -05:00
1d2fd6d271
Change persistent 45° state to only drawing
...
Move/edit points have a lossy state that holds only for the time in
which the tool is active. It reverts back to non-constrained after
completion of the move/point edit
Fixes https://gitlab.com/kicad/code/kicad/issues/9574
2021-11-17 15:38:28 -08:00
e57ef66971
Fix build error with wxWidgets 3.0.
2021-11-17 12:28:23 -05:00
ffae6c8f56
Fix hole table grow issue.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9666
2021-11-17 12:49:53 +00:00
a699cccaaf
Fix two string issues
...
Comp -> Compatible
Update string reference to changed string
2021-11-16 10:38:56 -08:00
ed478f5ec0
Revert to ERROR_INSIDE for complex pad shape hulls in PNS
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9544
2021-11-15 19:15:05 -05:00
a4e9beeeac
Coverity issue fix.
2021-11-15 14:02:28 -05:00
ab2eae6f48
Implement a more nuanced firstFocus for Track & Via Properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9645
2021-11-15 13:02:41 +00:00
9d587e3e6e
Import Eagle rects, polys and circles with 0 width as filled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9639
2021-11-14 23:50:05 +00:00
66d9e7073f
More discrete borders for Kicad mgr, PCM and appearances panels.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9616
2021-11-14 15:01:44 +00:00
591fbf6383
altium: use arc angle to determine winding direction
2021-11-14 14:45:07 +01:00
80c5b1efb1
File formatting improvements and fixes.
...
Symbol library IDs included the library nickname which is incorrect
and meaningless since it will be overwritten by the symbol library
table code. This is not a file format change as there are no behavioral
differences.
2021-11-13 12:57:18 -05:00
53f5d616aa
Coverity issue fixes.
2021-11-13 11:38:31 -05:00
eb3d8dbcc8
DIALOG_FOOTPRINT_PROPERTIES: fix an issue when a layer selector widget is selected.
...
When resisting the dialog, the widget was not moved.
Fixes #9617
https://gitlab.com/kicad/code/kicad/issues/9617
2021-11-13 11:12:08 +01:00
2c870acaac
Fix arc exporting to GenCAD.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9597
2021-11-12 18:07:31 +00:00
381da21609
Don't inc/dec to netclass track width value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9622
2021-11-12 17:50:34 +00:00
879254abff
Remove track min width from the status bar.
...
It presents an over-simplified picture. Better to use Inspect >
Constraints Resolution....
Fixes https://gitlab.com/kicad/code/kicad/issues/9623
2021-11-12 17:31:50 +00:00
fd6a75b779
Do not call TransformToPoly for negative sized PADs
2021-11-12 15:40:08 +00:00
b46b27fe8c
Altium import: Avoid illegal filenames when writing embedded 3D models
2021-11-12 14:49:22 +00:00
a9b4465703
Altium import: Use UTF16 string table for PCB texts
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7948
2021-11-12 14:49:22 +00:00
992fc83870
Pcbnew: fix GenCAD exporter bug.
...
The chamfered rectangle pad coordinate export was in the absolute board
position instead of relative to the footprint origin which GenCAD expects.
This fixes KSC ticket #413 .
2021-11-11 17:31:52 -05:00
8ec3ce99ae
PNS: Update shover when autocompleting on item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9598
2021-11-10 18:17:56 -05:00
13f081549c
CADSTAR PCB: Use all User layers when mapping documentation layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9577
2021-11-10 21:47:22 +00:00
ad2e780a2c
CADSTAR PCB: Correctly load pads with holes
...
If the THROUGH_HOLE attribute isn't set, it just means that the pads
are only present on one side of the board, but there can still be a
plated / non-plated hole.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9579
2021-11-10 21:21:32 +00:00
f6c160eb50
Apply a big hammer for python script refreshing.
...
While not ideal, this should tide us over until we have a commit
architecture for python scripts.
Fixes https://gitlab.com/kicad/code/kicad/issues/7065
2021-11-09 18:47:47 -05:00
0dcbfa2b69
Always use UUIDs for implicit keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9580
2021-11-09 17:57:47 +00:00
c0a6014114
Save actual control values; GetOriginalText is only for eval.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9575
2021-11-09 13:53:03 +00:00
0631c8fc74
Fix logic bug when updating circular pad points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9576
2021-11-09 13:14:24 +00:00
18d9f6e323
Reduce auto.
2021-11-09 13:14:24 +00:00
59807d8d26
A better solution to discarding pending shove operations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9553
2021-11-09 00:00:54 -05:00
0234ae3003
Add CloneFrom API for BOARD_DESIGN_SETTINGS in SWIG
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6885
2021-11-08 23:01:24 -05:00
75d75799f7
Move to getters/setters for aux and grid origin
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8836
2021-11-08 22:36:40 -05:00
6cc6f06a9a
Millimetres -> Millimeters
2021-11-08 15:56:51 -08:00
6569337d27
Haching -> Hatching
2021-11-08 15:56:51 -08:00
2f1a3827cf
Solder paster -> Solder paste
2021-11-08 15:56:51 -08:00
6af031be05
Use double-quotes for rule expressions.
...
The Mac double-quote bug is now fixed and strings inside expressions
are single quoted making single-quoting the entire expression pretty
hard to visually parse.
2021-11-08 20:53:59 +00:00
b1e8241ebe
Update pin type as well as function from existing when updating fp.
2021-11-08 20:53:59 +00:00
d0014a307d
Reduce the artificial gravity for selecting vias by a bit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9563
2021-11-08 20:53:59 +00:00
81fc7c71d1
Handle blind/buried vias in Eagle import
...
Don't sanitize layers before setting type
Fixes https://gitlab.com/kicad/code/kicad/issues/9557
2021-11-08 12:46:54 -08:00
7fd669b6a8
Use green soldermask and white silkcreen when unspecified
...
Also - unspecify colour of soldermask by default
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9538
2021-11-07 15:35:14 +00:00
dbad85d405
Remove instances of "auto".
2021-11-07 14:12:44 +00:00
97e9348ee1
Fix typo "verical" -> "vertical"
2021-11-06 20:39:19 +00:00
8f0b61715b
Fix tooltip about Edge.Cuts (not) being plotted on all layers, remove period
2021-11-05 23:38:14 +00:00
6aa7602c32
CADSTAR PCB: Reverse anticlockwise arcs before adding to the chain
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9533
2021-11-05 17:13:02 +00:00
8314251fa1
CADSTAR PCB: Force white silkscreen and green soldermask
...
We don't know the actual colour from the design, but this is the most
common used in the industry.
2021-11-05 17:13:02 +00:00
93e163b98d
Do not replace delimiter " by ' inside a command string.
...
Fixes #9528
https://gitlab.com/kicad/code/kicad/issues/9528
2021-11-05 13:24:38 +01:00
792a8dca9d
Fix errant wxassert about expand and center align
2021-11-04 22:55:40 -04:00
393c84e67a
Fix sketch mode rendering of beziers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9522
2021-11-04 12:57:16 +00:00
cf6b18ec7e
Remove escaped double-quotes
...
For some reason, escaped double quotes in wxString::Format cause issues
on Mac. We can replace them with single quotes in most places without
loss of clarity
2021-11-03 17:03:14 -07:00
b022b314a4
Account for pad hole is BBox
...
The bounding box is used for hit testing. If the hole is arbitrarily
larger than the pad, we need to allow the user to properly select it
2021-11-03 14:33:44 -07:00
ffd1139cfe
Make sure a pad is at least as big as its hole in the RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9516
2021-11-03 18:53:26 +00:00
762cd5a32f
Add PLACE_FILE_EXPORTER to swig to call in python
2021-11-03 16:32:05 +00:00
6b432e895a
DIALOG_COPPER_ZONE_BASE: fix incorrect max value of zone priority.
2021-11-03 11:49:38 +01:00
64f77b3596
PNS: Add support for 90-degree corner modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6902
2021-11-03 02:14:23 +00:00
522359ccbf
Improve comments.
2021-11-02 20:07:34 +00:00
3c78bf4ef8
One active point at a time.
2021-11-01 16:17:33 +00:00
f4cd57f815
Reserve production strings
2021-11-01 07:14:38 -07:00
153594b9ea
PNS: Actually implement the AbortRouting API
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9425
2021-10-31 16:06:57 -04:00
22ba640c2b
Remove locking from footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9496
2021-10-31 16:33:03 +00:00
e3ef101ec9
Add missing view controls for FP Editor Appearance Manager.
2021-10-31 16:33:03 +00:00
b2db24f275
CADSTAR PCB: Don't invert Text Angle for mirrored text
...
It matches the original cadstar when we don't invert
2021-10-30 18:14:23 +01:00
d4537b6f53
Coverity issue fix.
...
Remove uninitialized member variable as it was unused rather than
initialize it which would have made Coverity happy.
2021-10-30 11:52:06 -04:00
5f8e0ef1e0
Patch up arc hit-testing and printing for 6.0
...
This could use another look when we're not so near release. We
really shouldn't need to special case eeWinding vs. not eeWinding.
Fixes https://gitlab.com/kicad/code/kicad/issues/9491
2021-10-30 15:10:07 +01:00
08700e3522
Router: show corner style in message panel
2021-10-30 09:08:52 -04:00
Mikolaj Wielgus
jean-pierre charras
Jeff Young
Seth Hillbrand
Graham Keeth
木 王
Roberto Fernandez Bautista
Marek Roszko
Steffen Mauch
Wayne Stambaugh
Jon Evans
qu1ck
dana
Thomas Pointhuber
Erwan Rouault
Jacob Mealey
Tomasz Wlostowski
Mike Williams
Simon Schaak
dsa-t
Konstantin Baranovskiy
Jonathan Haas
Ian McInerney
Franck Bourdonnec
david-beinder
Mark Hämmerling
Asuki Kono
Johannes Pfister