called inside the board editor.
Fix also a broken behavior: the current action was not cancelled, and if it is
called during a move items (when typing the 'T' key), items were broken.
The actual bug is the fact it is called also in fp editor and footprint wizard frame,
because it is part of EDIT_TOOL action list, common to fp editor, and should not.
But a full change is much more costly than just a filter.
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
Also removes a bunch of old implementations of pad locking and
filtering which are no longer needed. (They're now handled by the
uniform locking code.)
Also removes some of the auto-promotion logic. Rotating a footprint
when a pad was selected is going to be surprising whether the pad
is locked or not.
Fixes https://gitlab.com/kicad/code/kicad/issues/8322
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
This simple commit makes the Pcbnew copy to clipboard operation snap the
obtained cursor position to grid before the anchors are calculated. This
is also the way the move operation has been apparently working so far.
To be clear, this will not remove all cases where the copy reference
point is not aligned to the grid (see the linked Gitlab issue for
details about the problem). This will still occur for zone outlines that
are not axis-aligned. But such behavior has been so far also present in
the moving operation, so this may be as designed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7507
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
After a rotation or flip the reference point has to be restored to the
previous value to prevent the dragged item from warping to the cursor.
Before this change, the reference point was only cleared, causing odd
behavior when a rotation or flip was performed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7112
Check for footprint editor
Promote pad edits to footprint edits iff
- Pad is locked
- Footprint is not
Otherwise, handle the pad normally and prompt for locked items if found
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints. The less common action of
editing pads in layout can be accomplished after unlocking the pads
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.
Note that we will get an update at the end of the move
because OnModify does it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
CHANGED: If you flip or rotate an item or selection of items, move
the mouse, press 'M' and start moving the mouse, the selection jumps
to where the mouse is. This MR fixes that so it doesn't happen.
This bug was reported against the 5.1.x branch but also affects the
5.99 branch. This MR is for the 5.99 branch.
Fixes https://gitlab.com/kicad/code/kicad/issues/4069
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
This unifies everything under a single architecture with a "don't
show again" dialog. Since everything now goes through the same
path it should be reasonably easy to make it do whatever we want
in the future.
Right now it presents 3 options: modify only unlocked items, override
locks and modify all items, or cancel command.
1) Make them easier to select.
2) Mirror text when flipping to other side of board.
3) Flip around a more "known" point (the text position isn't really
here nor there).
Fixes https://gitlab.com/kicad/code/kicad/issues/6219
The Wait() function will return a null TOOL_EVENT when the tool
stack is shutting down, so we can't just always pass the event,
instead we must check for null and end the looping if a null
event appears.
It's only needed in PlaceModule() and creates problems here. Also
adds a comment regarding the encapsulation leak that makes all this
hard to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/5932
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
ADDED memberOf() function for DRC rule expressions.
Also fixes a bug in several of the pickers where the event wasn't
being correctly passed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
david-beinder
Ian McInerney
Jeff Young
jean-pierre charras
Fabien Corona
Roberto Fernandez Bautista
Marek Roszko
Jon Evans
Mikolaj Wielgus
Jonathan Haas
Dominik Wernberger
Seth Hillbrand
Michael Kavanagh
PJM
Wayne Stambaugh
Mario Luzeiro