Commit Graph

163 Commits

Author SHA1 Message Date
Jeff Young ce2937a399 Move rest of DRC tests to kicad. 2020-09-11 23:14:12 +01:00
Jeff Young 5424d6fa09 Move new clearance tests into kicad. 2020-09-11 21:26:57 +01:00
Seth Hillbrand 965a32077d Fix compile error 2020-09-11 08:40:36 -07:00
Jeff Young cc86630f11 Start pulling new DRC engine into Kicad. 2020-09-11 16:04:11 +01:00
Jeff Young 6b4a6f4d3e Restore min seg limit for rounded-corner pads.
It suffered from a cacophony of errors, starting with an errant
comment that made it later look like a bug.  Sigh.
2020-09-11 14:41:45 +01:00
Jeff Young e2bc7557cc Clean up arc/circle polygonization.
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle.  However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.

2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
 anyway.  (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".

3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers.  Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.

4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.

5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards.  It's now only exposed as a RAII object which  automatically
cleans up when it goes out of scope.

6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.

Fixes https://gitlab.com/kicad/code/kicad/issues/5567
2020-09-11 11:23:49 +01:00
Jeff Young fc1665ff28 ADDED Clearance Inspector. 2020-09-10 20:58:38 +01:00
Jeff Young e782794f96 Flesh out object properties and DRC Rule syntax help. 2020-09-05 17:44:59 +01:00
Jeff Young f1f8f746f4 Also resolve worksheet textVar refs in DRC.
Fixes https://gitlab.com/kicad/code/kicad/issues/5506
2020-09-04 21:55:10 +01:00
Jeff Young ec576b5dfa DRC checks need to be done on current layer.
Don't be fooled by the name "segment".  It might be a via which is
on multiple layers....

Fixes https://gitlab.com/kicad/code/kicad/issues/5503
2020-09-04 15:05:03 +01:00
Jeff Young 007580c4b8 ADDED pad:pin checks for DRC "Test footprints against schematic". 2020-09-04 14:07:42 +01:00
Jeff Young d1006138fd ADDED holeWallPlatingThickness to AdvancedCfg.
Used for zone filling and DRC hole collision testing.  Allows us to
calculate the actual hole size from the finish hole size.

Fixes https://gitlab.com/kicad/code/kicad/issues/5468
2020-09-03 16:00:07 +01:00
Jeff Young 38e9217d54 Consolidate all DRC epsilon/threshold values to a single advancedCfg setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5464
2020-09-03 15:03:09 +01:00
Jeff Young 9a8dd6312b Fix formatting. 2020-09-03 15:03:09 +01:00
Jeff Young 4e885990b8 Don't keepout a keepout's own footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/5371
2020-08-28 11:05:58 +01:00
Jeff Young aa84bd6283 Use the right sign when dealing with the clearance epsilon.
Fixes https://gitlab.com/kicad/code/kicad/issues/5313
2020-08-22 20:03:46 +01:00
Jeff Young f95651841e Report all extra footprints, even if they're duplicates.
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
Jeff Young 93ef18d775 Fix typo where two footprint warning messages were transposed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5303
2020-08-22 16:20:18 +01:00
Ian McInerney ade7f529b8 Switch shared_ptr creation to using make_shared 2020-08-16 12:37:50 +01:00
Jeff Young ec5040aff5 Fix missing 'else' and EOF processing, both of which cause crashes. 2020-08-14 22:11:04 +01:00
Jeff Young 519bc80394 Replace error reporting in DRC rule compiler. 2020-08-13 18:47:41 +01:00
Tomasz Wlostowski e907e43bd9 pcbnew/drc: post-rebase fixes 2020-08-13 14:50:59 +02:00
Tomasz Wlostowski d937fadd6f Migrate RC_ITEM to use shared_ptr 2020-08-13 14:50:59 +02:00
Jeff Young 0c9d08249f Fix crash where dummy edge doesn't have a valid parent. 2020-08-13 00:07:59 +01:00
Jeff Young 393bb0fd83 Fix assert where geometry routine wasn't ready to handle layers.
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
Jeff Young 463100d67f Remove a long-standing hack to keep divots out of adjacent zones.
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
Seth Hillbrand 2c8d20207e Allow micro-via to begin/end in middle layers
Microvias can be drilled through adjacent layer pairs, not just F_Cu and
B_Cu
2020-08-10 03:27:27 +00:00
Seth Hillbrand 41edf5c5bf Updating DRC to handle vias with differing layers 2020-08-10 03:27:27 +00:00
Seth Hillbrand 5fc6b74c89 ADDED: Remove unused pads
This option removes copper layers from pads and vias where they are not
connected to other board elements.  This allows the inner layers to be
more closely routed if the via landing pad is not needed.

Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
jean-pierre charras 9b3ff5af47 Fix a few I18N issues.
Especially keywords should not be included in translated strings.
2020-08-09 20:38:35 +02:00
Mark Roszko c6e388db14 Implement an app progress indicator in the taskbar
ADDED: Progress indicator in the taskbar

This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.

Note, this requires wxWidgets 3.1+
2020-08-09 10:55:00 +00:00
Jeff Young 02bf5d27df Fix crash when a DRC rule specifies an empty zone as a keepout. 2020-08-08 16:25:30 +01:00
Jeff Young db501c2002 Fix issue with doing DRC on a multi-layer zone.
Testing for an intersection of layers between the zone and the
item (track in this case) isn't enough: we need to test for the
presence of the item on each layer of the zone.

Fixes https://gitlab.com/kicad/code/kicad/issues/5102
2020-08-07 22:40:18 +01:00
Jeff Young 1671c3356d Fix typo where "continue" got put on wrong side of closing brace.
Fixes https://gitlab.com/kicad/code/kicad/issues/5100
2020-08-07 22:40:18 +01:00
Jeff Young e5b50d90a7 Update DRC rules to new layer and disallow grammars.
Also adds support for hooking rules up to named zones.

Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
Jeff Young f27661fa39 Be more flexible with user input; more multibyte safety. 2020-08-06 19:38:06 +01:00
Jeff Young 9c9fdb2569 More performant (and more correct) deletion of DRC markers.
Fixes https://gitlab.com/kicad/code/kicad/issues/5057
2020-08-04 11:45:07 +01:00
Jeff Young c56599ab07 Allow ERC/DRC markers to be deleted without deleting exclusions.
Fixes https://gitlab.com/kicad/code/kicad/issues/4953
2020-08-02 22:45:48 +01:00
Jeff Young 6d319e5bf7 Both pads must have nets to be shorting.
Fixes https://gitlab.com/kicad/code/kicad/issues/5047
2020-08-02 17:05:13 +01:00
Jeff Young fdb23d1a2d Add DRC check for items (pads for now) shorting two nets.
Fixes https://gitlab.com/kicad/code/kicad/issues/4955
2020-07-30 21:42:23 +01:00
Jeff Young 577c1be391 Report all DRC rule errors, not just the first. 2020-07-30 14:27:42 +01:00
Jeff Young 5a1b1c544a Add layer to rule grammar. 2020-07-30 14:27:42 +01:00
Tomasz Wlostowski 89a953e039 Migrated GetEffectiveShape(s) to SHAPE_COMPOUND 2020-07-29 23:14:03 +02:00
Jeff Young 0fecb5f277 Be more explicit about string/character conversions.
This *may* fix the bug where a layer name isn't displayed correctly
in the error dialog.  But probably not.
2020-07-28 20:44:40 +01:00
Jeff Young bf445c1a95 Performance enhancements.
1) cache pad polygon outlines
   huge improvement in connectivity performance and a decent
   improvement in DRC performance
2) don't pre-allocate CONTEXT stack
   significant improvement in DRC rule performance
2) don't keep re-encoding strings
   decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
Jeff Young f97c50bfde Give excluded DRC items their own layer.
(And fix a bug with the new mulit-layer zones and rule-based keepouts
at the same time which prevented me from testing it.)

Fixes https://gitlab.com/kicad/code/kicad/issues/4954
2020-07-24 01:28:25 +01:00
Jeff Young 6529e339a9 Don't store context in the uCode. (It's not thread-safe.)
Although it does give some pretty funny results when filling zones.
2020-07-23 22:21:13 +01:00
Jeff Young a6b6084a60 Add preflighting for DRC rule function calls. 2020-07-22 14:33:32 +01:00
Jeff Young c52df811ae Add expression eval to constraint min/max/opt values.
Also adds error reporting for above.
2020-07-21 23:43:10 +01:00
Jeff Young 095937563b Hook libeval compiler up to rule parser
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
  board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
  don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
2020-07-20 22:11:53 +01:00