* Replace all occurrences of the word "part" with "unit" when referring to
multiple unit components for improved consistency.
* Replace "shared by" with "common to" when referring to objects (lines, arcs,
pins, etc.) that are common to all units.
* Improve wording in library component properties dialog.
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* Change edit pin per part flag to only have effect when editing
component with multiple parts or alternate body styles.
* Move global edit pin pert part variable into library editor frame
object.
* Note that this only fixes the bug when the component does not have
multiple parts or alternate body styles.
* Move the hierarchical label connected test into the NETLIST_OBJECT class.
* ERC pin type strings can now be translated.
* Remove unused EDA_DRAW_PANEL attribute from all ERC test functions.
* Add get marker count method to SCH_SCREENS object.
* Redundant header removal.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Disable save library command when user does not have permission to write
the active library.
* Append the active library file name displayed in the title bar with read
only when the user does not have write permission.
* Test the selected folder permissions when user chooses the save library
as command.
* The obligatory coding style policy fixes.
* Add in help menu a direct link to the new doc Getting_Started_in_KiCad.pdf, written by contributors (useful for beginners)
* Fix other very minor issues in CvPcb.
* Update howto doc about translation
* Remove most (not all) variables that were initialized but never used that
cause GCC 4.6 to generate a warning.
* Fix bug in schematic library editor best zoom calculation.
* Create library collector class.
* Add clarification menu to library editor when multiple items are found
at the current position.
* Add get clarification menu text to all objects derived from LIB_ITEM.
* Add get menu bitmap for all objects derived from LIB_ITEM.
* Improve LIB_PIN bounding box calculation.
* Rename LIB_ITEM::DoGenCopy to doClone to match behavior defined in base
class EDA_ITEM.
* Minor class renaming for improved code consistency.
* Added less than operator to EDA_ITEM.
Also fix a minor zoom page issue in Libedit.
wxMSW, version 2.8.x must be patched.
Some zoom values smaller than 3 to 5 create artifacts on screen, mainly values < 1.
(corresponding to draw scale factor > 1 )
* see http://trac.wxwidgets.org/ticket/9554
This is fixed in version 2.9.x
Workaround: ( that is not a full fix, but remaining artifacts are acceptable )
edit file edit file <wxWidgets>/src/msw/dc.cpp
>> search for line
static const int VIEWPORT_EXTENT = 1000;
>> and replace by
static const int VIEWPORT_EXTENT = 10000;
* Change EDA_ITEM set flag function to set flag bits using logical or
instead of assignment.
* Add clear flag function to EDA_ITEM to clear flag bit using inverted
logical and.
* Factor change schematic text type code out of switch statement into
a single function call.
* Schematic text orientation function renaming improvements.
* Lots of small coding policy changes to updated files.
* Merge three separate rotate code paths into a single rotate item function.
* Reduce three separate rotate command IDs into a single rotate command ID.
* Move pin rotate code into pin object.
* Merge two duplicate case statement and delete pin code paths into a
single delete function.
* Make all delete commands use new delete function.
* Fix a few set tool ID calls to use default cursor instead of arrow
cursor.
* Make EDA_DRAW_FRAME current tool ID member variable private.
* Added global no tool selected ID to replace application specific no
tool selected IDs.
* Change SetToolID to prevent setting the tool ID to anything less than
the new global no tool selected ID and assert on debug builds.
* Change command and update user interface command event handlers to use
new global no tool selected ID.
* Fixed schematic library editor add pin hot key handler.
* CVPcb now uses wxUpdateUIEvent instead of set toolbars.
* Removed duplicate event handlers in CVPcb that were factored into
EDA_DRAW_FRAME.
* Fix definition of GeneralControle() in CVPcb that prevented it from being
called.
* Remove rarely used and scary refresh code GeneralControle() method in all
main frame windows.
* Factor zoom menu and tool bar command IDs down to EDA_DRAW_FRAME.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Fix bug that prevented component from being replaced in library when
the component root name was changed.
* Fix drawing bug when changing text or field item string while move in
progress.
* Fix drawing bug when rotating text item while move in progress.
* Prevent undo or redo when editing a component draw item.
* Fix assert bug when replacing component in library when the component
root name was changed.
* Fix bug in field editor caused by new root alias implementation that
prevented any field from being changed.
* Fix minor spacing issues with EESchema find dialog.
* Deprecate remaining internal linked list code from component library
objects.
* Rename pin object files to match new library object file naming
scheme.
* Move LIB_TEXT object definition into it's own header file.
* All library component object editing is now performed with the ojbect
except LIB_PIN (coming soon).
* Added TRANFORM class to handle coordinate transforms.
* Remove old transform matrix functions.
* More file renaming to align them with the other component library
object file names.
* Fix hot key bugs in library editor to disable edit keys while an item
is being edited.
* Fixed bug when cancelling rotation of text and field objects while
being moved.
* Use C++ map in component library instead of boost::ptr_vector.
* Drop Boost pointer containers for standard C++ containers.
* Moved duplicate name user interface elements from library object to
library editor.
* Added code to support direct addition and replacement of component
alias objects into libraries.
* Removed temporary strings used to add and remove alias objects.
* Libraries only store alias objects, components now accessed thru alias.
* Simplify library API for adding, removing, and replacing components.
* Updated edit component in library dialog and library editor to reflect
component library object changes.
* Fixed bug in library viewer when displaying alias name.
* Made a few header files compile stand alone per the new coding policy.
* Remove some dead code and the usual code formatting fixes.
* Some bugs fixed
* Starting enhancements in Libedit: menubar and commands to "plot" current component in PNG or SVF file (SVG file not fully working, must be refined)
jean-pierre charras
Dick Hollenbeck
Wayne Stambaugh
Lorenzo Marcantonio
Andrey Fedorushkov
Jacobo Aragunde Perez
Hauptmech
charras