Commit Graph

330 Commits

Author SHA1 Message Date
Seth Hillbrand 5b2be906b8 Removing CLIPPER poly support 2021-07-03 19:37:50 +00:00
Seth Hillbrand 4f4deece6d ADDED support for reading/writing arcs in polys
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
Marek Roszko eff75b630f Get rid of anonymous struct typedefs
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
Wayne Stambaugh 507a88524a KiCad internal library header file housekeeping. 2021-07-01 13:46:38 -04:00
Wayne Stambaugh 175b474c3e Coverity issue fixes.
Fixes issues #280412, #314755, #329615, #332459, #332157, #332167,
2021-06-30 18:08:49 -04:00
jean-pierre charras 17737af130 Fix some issues related to SHAPE_ARC:
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
jean-pierre charras bcb5618315 Fix incorrect calculation in TransformCircleToPolygon(), only noticeable
when the allowed aError is (unusually) large.
2021-06-28 18:51:37 +02:00
jean-pierre charras fa49b54f93 Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
jean-pierre charras 9a865b1989 Fix a typo and a minor compil warning 2021-06-28 14:37:35 +02:00
jean-pierre charras 310adedf85 Add GetCircleToSegmentError() to geometry/geometry_utils.
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
jean-pierre charras 3c81403424 Refinements in Arc to Polygon transform: slightly better shapes of arc ends.
Note also the transform is still not good: the same parameters are applied
to convert inner arc, outer arc and middle arc of a thick arc to segments.
But these parameters depend on arc radius (or circle radius) value.
2021-06-26 14:20:55 +02:00
jean-pierre charras 31d7a0a8d1 TransformArcToPolygon(): slightly better approximation of arc.
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
jean-pierre charras 1d6ad4a52a SHAPE_ARC::ConvertToPolyline(): fix ugly approximation for some arcs.
Arcs with small radius can be approximated with very few segments.
However, if the thickness is large, relative to the radius, the approximation
must be based on the external radius, not the arc radius.
The difference can be significant.
This is especially noticeable for these graphic arcs in filled zones.
2021-06-23 18:30:02 +02:00
jean-pierre charras 0ff1f6f69c Try to fix a include order (Windows only, to fix aCI/CD error) 2021-06-16 20:04:32 +02:00
jean-pierre charras aeb479b46f Fix an issue with pythons scripts running outside Kicad (Windows specific).
When running a python script is run from a console, outside Kicad, a wxWidgets
alert was always show (even in release mode)
This is due to calling wxStandardPaths::Get() with no wxApp open( i.e. wxTheApp == O)
The fix uses a dummy wxApp in this case.
2021-06-16 10:18:39 +02:00
Seth Hillbrand a04d6401c1 Transform arcs more accurately
Segment approximation for arcs leaves small "indents" where the rounded
edges of two segments don't quite meet.

This gives closer approximation by calculating the inner and outer joint
points based on the radius, eliminating the indents.
2021-06-11 14:26:38 -07:00
luz paz f968fc8719 Fix source comment / documentation typos 2021-06-09 19:32:58 +00:00
david-beinder 053bd66650 Fix localization of OS unsupported message, disallow bug reports from W7 2021-06-09 19:01:54 +00:00
Marek Roszko ffa87e69c6 Remove/replace some stdint.h includes 2021-06-08 21:17:57 -04:00
Marek Roszko 69d7a23e1c Start cleaning out wx/wx.h in cpp files 2021-06-07 18:20:47 -04:00
Michal Schulz f923649801 If NSError contains recovery suggestion string, append it to error message as it was until now. However, if recovery string is NIL, do not append it at all.
This MR fixes the "error message\n\n(null)".
2021-06-06 14:24:08 +00:00
Jeff Young 53a75a4961 Fix actual-clearance handling in arc collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/8407
2021-06-03 18:33:59 +01:00
Jeff Young 976e756b02 Formatting. 2021-06-03 18:33:59 +01:00
Seth Hillbrand 059f79dfdb Re-remove KiROUND from header
Moves routines requiring KiROUND (and util.h by extension) to the cpp
file
2021-06-03 08:44:17 -07:00
Marek Roszko 29783f125b Eliminate one wxRect constructor in BOX2
The only usage auto converted to BOX2D anyway...
2021-06-03 01:27:15 -04:00
Seth Hillbrand cf1c75ecd4 Handle rounding errors in seg length calculation
SQRT needs to be passed through KiROUND before returning otherwise,
truncation errrors will accumulate between routing and DRC

Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-02 16:42:35 -07:00
Marek Roszko c294d28275 Split POLY_GRID_PARTITION to a cpp file
Not entirely a lightweight class
2021-06-02 18:31:30 -04:00
Marek Roszko 13abb9f947 Shift some seg functions to the cpp file 2021-06-02 18:31:30 -04:00
jean-pierre charras b6de4da686 Fix compatibility with wxWidgets 3.0.x
Fixes #8533
https://gitlab.com/kicad/code/kicad/issues/8533
2021-06-02 10:02:20 +02:00
Marek Roszko 0b4a680dbb Hotglue wxLogDebug into math/util.h without the global include 2021-06-02 00:26:16 -04:00
Marek Roszko cf2bb5692a Remove the wxLog calls from math/util.h for now
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
Jeff Young 46d746c9da Performance optimizations. 2021-06-01 23:11:54 +01:00
Tomasz Wlostowski 2d8264124d geometry: SHAPE_LINE_CHAIN::PathLength() now can accept the maximum index of the segment to calculate the length to 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski 7553b7b092 geometry: add minimum distance threshold parameter to SHAPE_LINE_CHAIN::Find()/FindSegment() 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski b3fb7190df geometry: SEG::Contains() should use Distance(), not SquaredDistance() for correct rounding 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski e7fe8c4ddb geometry: rework SHAPE_LINE_CHAIN::Intersect() to explicitly indicate touching vertices and remove references to SEGs from INTERSECTION structure 2021-05-29 00:13:24 +02:00
Jon Evans f30ebbde33 Fix accuracy of tuning path calculation when measuring arcs
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8401
2021-05-10 21:22:51 -04:00
Ian McInerney 30c92fc5d1 Disable OSX automatic window tabbing 2021-05-09 12:59:57 +01:00
Tomasz Wlostowski dc70df6036 kiplatform: check for null window handle in IsWindowActive(). 2021-04-27 14:13:16 +02:00
Jon Evans 715c61ac9f PNS: Fix yet more arc edge cases
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
Jon Evans 1c431d9929 PNS: Fix some off-by-one errors with arc dragging 2021-04-11 22:12:53 -04:00
Jon Evans f5ef60c2f2 PNS: Fix shoving segment after arc 2021-04-11 18:06:21 -04:00
Jon Evans a26fc6d65d PNS: Fix several issues with arc dragging
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
jean-pierre charras 258fd07939 Fix a compil issue (at least on msys2) 2021-04-11 17:32:40 +02:00
Jon Evans 7ba110bd77 PNS: Fix dragging of segments with arcs in line 2021-04-11 10:18:57 -04:00
Thomas Pointhuber a30894e5a1 Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG 2021-04-11 13:27:25 +00:00
Jeff Young e04c820442 Formatting. 2021-04-09 14:02:13 +01:00
Roberto Fernandez Bautista b7bd7246af SHAPE_LINE_CHAIN::Split: Add integers before incrementing the iterator
Partially Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
Roberto Fernandez Bautista 235688e459 Less restrictive Arc Track Dragging tool
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.

Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
Marcus A. Romer 1632707d9b Replace tabs with spaces 2021-04-05 01:13:39 +00:00
Jon Evans 2c05d99d9f SHAPE_POLY_SET: Fix segment collision testing
It appears as though there was an optimization to skip testing segments if
one of their endpoints (and only the A point) was inside.  Unclear the reason
for this, but I'm going to assume that it was intended to optimize the case
where both points are inside (like the point case above it).
2021-04-04 20:12:45 -04:00
Jon Evans 5bc1e55272 SHAPE_LINE_CHAIN: Don't crash if inserting point at the end 2021-04-04 19:38:54 -04:00
Jon Evans bd6539885b Fix SHAPE_POLY_SET::SquaredDistanceToPolygon ignoring aNearest if unlucky 2021-04-04 19:38:54 -04:00
Jon Evans 3c1a8f8c88 Fix MSW build, take 2 2021-04-02 20:16:25 -04:00
Jon Evans 80eee2decb Fix MSW build 2021-04-02 20:13:10 -04:00
Ian McInerney 8ea18c0639 Don't steal focus from other windows on GTK
Before, it was possible for the canvas to steal the
focus if the cursor was only moved over it and not
clicked. Now, the canvas will only take the focus if
the frame is active.

Fixes https://gitlab.com/kicad/code/kicad/issues/7233
2021-04-03 00:17:28 +01:00
Jeff Young b6f2941a06 Another try a allowing touching courtyards.
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
Ian McInerney 41f88dbabc Refactor platform-specific init into two phases
The first phase is for the environment before the OS
apps are created, and the second phase is for after
the OS app is created but before all of our processing.

Fixes https://gitlab.com/kicad/code/kicad/issues/7992
2021-03-23 19:11:08 +00:00
Jon Evans cdb352bb24 Allow finding kicad_3dsg when running from build dir
This might also come in handy later when we use more dynamic libs
2021-03-21 09:16:47 -04:00
Jon Evans f1c599fa4d Tweak PCB selection behavior to reduce unintuitive behavior
We were discarding shapes too aggressively for having a
larger area than a shape underneath.

Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
Roberto Fernandez Bautista e4b99b9bb5 Fix SHAPE_ARC::Collide and add Unit Tests 2021-03-20 16:11:43 +00:00
Marek Roszko 917e368db3 Add missing header that broke msvc builds 2021-03-20 10:28:35 -04:00
Jon Evans 61c9645220 Fix Windows build 2021-03-19 18:36:16 -04:00
Ian McInerney 008f0d55c3 Add an interceptor for GTK error messages to hide them
wxWidgets seems to cause GTK to spam messages to the terminal,
and we have no control over that. So lets hide the messages
so no one complains about them. If people really want to see
them, they can add the KICAD_SHOW_GTK_MESSAGES build flag to CMake
and they can watch them scroll past.
2021-03-19 22:05:00 +00:00
Ian McInerney 3036683a2c Move platform-specific init tasks into KIPLATFORM 2021-03-19 21:26:07 +00:00
Seth Hillbrand 48bd564639 Add Dark mode detection to MacOS 2021-03-16 21:58:42 +00:00
Jon Evans a9f86c6f3d Enable icon themes for Windows
Windows 10 "dark mode" is not supported and likely won't be,
but high-contrast mode and manual color theme editing is still
possible.
2021-03-14 15:39:47 -04:00
Dominik Wernberger e2aa7be4b3 Added a lot of consts and refactored a few lines 2021-03-08 12:49:48 -08:00
Mikolaj Wielgus 0f22b54cd8 Clip the leader lines properly when using circular text frame
Fixes https://gitlab.com/kicad/code/kicad/issues/7810
2021-03-07 21:19:19 +00:00
Tomasz Wlostowski 87ea540953 Fix whitespace errors 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski f7f5e67f56 geometry: SHAPE_LINE_CHAIN::Simplify() now correctly simplifies last 3 colinear vertices 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski baacb9c85a geometry: fix MTV calculation for simple polygons 2021-02-25 17:18:23 +01:00
Seth Hillbrand 507ca9bc73 Add DPI scaling to KIPLATFORM
GTK needs to check current scaling but wx doesn't provide this
functionality in 3.0, so we can bypass by going straight to the source.
2021-02-22 17:38:27 -08:00
Jeff Young e89f9db438 Footprint disallow layer checking needs to be based on courtyards.
Fixes https://gitlab.com/kicad/code/kicad/issues/7620
2021-02-20 14:13:36 +00:00
Jon Evans 079203c345 Change Linux documents path to XDG_DATA_HOME
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7543
2021-02-17 20:25:50 -05:00
Roberto Fernandez Bautista 2d66abdc89 CADSTAR PCB Archive Importer: More improvements to loading of zones
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
Jon Evans 1ba7bebce6 Handle lack of a Documents directory 2021-02-09 20:15:30 -05:00
Marek Roszko 872184fe8b Revert "Bump minimum required CMake version to 3.10"
This reverts commit a475f45753.
2021-02-09 18:46:13 -05:00
Jon Evans 9728ceab0d Fall back to explicit documents path if XDG special dirs are missing
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7452
2021-02-08 20:21:39 -05:00
Simon Richter a475f45753 Bump minimum required CMake version to 3.10
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
Jeff Young 90b3d0c96d Implement TransformShapeWithClearanceToPolygon for DIMENSIONs.
Fixes https://gitlab.com/kicad/code/kicad/issues/6890
2021-02-03 23:34:17 +00:00
Marek Roszko 06a515339c Correct pointless and bad buffer sizing in RegisterApplicationRestart 2021-02-01 15:36:07 -05:00
Seth Hillbrand 73886aecb1 Ensure partially triangulated polys are not valid
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
Marek Roszko a47e8af0d0 Fix up naming of the kiplatform helpers 2021-01-27 19:12:20 -05:00
Marek Roszko 299830350c Fix macos build error 2021-01-27 19:12:19 -05:00
Marek Roszko 34bcf1883d Blindly implement the macos fetch of cache dir 2021-01-27 19:12:19 -05:00
Marek Roszko daf9c4f319 Centralize the 3d cache path 2021-01-27 19:12:19 -05:00
Marek Roszko 8622565480 Add GetUserConfigDir 2021-01-27 19:12:18 -05:00
Marek Roszko 2bbc25a630 Use g_get_user_special_dir for documents dir on gtk 2021-01-27 19:12:18 -05:00
Marek Roszko 28c6967dbc Start trying to shuffle around path management 2021-01-27 19:12:18 -05:00
Wayne Stambaugh 6ab1144ea3 Fix broken Doxygen comment specifiers.
Please note, ///> is not a valid Doxygen comment specifier.  ///< is the
correct specifier to use for single line or short Doxygen comments.
2021-01-25 07:42:36 -05:00
Roberto Fernandez Bautista 99d203feae Clarify CIRCLE::ConstructFromTanTanPt
Remove unused bool aAlternateSolution and add doxygen comments
2021-01-24 16:41:11 +00:00
Roberto Fernandez Bautista 48823c0723 Formatting fixes and fix qa_kimath following rebase 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 19620cebe7 qa tests: fix test_circle 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 6ed5ed52b8 qa tests for CIRCLE geometry library 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista b6a50d2f74 qa tests for SEG perpendicularity and parallelism 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 6e7ae93cc8 EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 2b5c1bae97 CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent 2021-01-24 16:41:10 +00:00
Seth Hillbrand b8dfcb34c4 Revert "Use less-sophisticated arc editing math."
This reverts commit 3b424d3868.  And fixes
issue with rouding causing arc errors
2021-01-18 12:44:27 -08:00
Mikolaj Wielgus 00a9910149 Fix misplaced parenthesis in VECTOR2<T>::Resize()
Fixes https://gitlab.com/kicad/code/kicad/issues/7045
2021-01-16 09:41:14 +00:00