New strategy isolates all draw/don't draw decisions to the ViewGetLOD
routines, and all dimmed/not dimmed to PCB_RENDER_SETTINGS::GetColor.
The actual drawing in PCB_PAINTER is more-or-less conditon free.
Also adds new layers for pad and via hole walls so that they can be
controlled for high-contrast mode.
Also changes the drawing paradigm so that the pads are drawn even when
not on the high contrast layer, just in low contrast. The hole wall
is drawn in high contrast. This actually makes things clearer to the
user (although to be honest was done to keep from having to re-render
pads when the high contrast layer changes since we have two separate
layers now that we can adjut colours on).
Fixes https://gitlab.com/kicad/code/kicad/issues/7328
In theory, the WM should now choose the closest size icon for its
purpose, making it easier to distinguish in space-constrained settings
Fixes https://gitlab.com/kicad/code/kicad/issues/6798
- remove outdated code or comment coming from old drawing code using wxDC
- move zoom values lists to zoom_defines.h
- fix incorrect zoom max and min values (gal scaling factor limits).
The accelerator strings really shouldn't be part of the translation,
and some translations have cause the accelerator keys to be incorrectly
handled. It is simpler to make it separate and just join them to the
translated string.
Make all accelerator modifiers use lowercased Ctrl instead of CTRL
to be the same as the other modifiers.
Fixes https://gitlab.com/kicad/code/kicad/issues/5992
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
* Create a new inspection tool to hold the measure tool and
the other inspection items
* Move some control functions from the frame to a tool and
rearrange the code to be cleaner.
To avoid issues with broken Gerber readers use aperture macros with shapes
without rotation when more than one primitive is required.
In many gerber readers, rotation of a set of primitives is broken
(do not follow Gerber requirements)
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
ADDED: Make middle mouse button double click do a 'Zoom to Fit'
in Eeschema, Pcbnew, and Gerbview. Ctrl-MMB does a 'Zoom to Objects'
in Eeschema.
Fixes https://gitlab.com/kicad/code/kicad/issues/1988
ViewGetLOD() returns the minimal value of a zoom to show an item.
However a zoom is a double, and using int as minimal value does not
allows setting a correct value in some cases.
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
We probably don't need it, but some code attempts to dereference
it so safer to have one then to start checking everywhere for
dereferences.
Fixes https://gitlab.com/kicad/code/kicad/issues/5353
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
EDA_ITEM is a child of VIEW_ITEM, so a static_cast is not appropriate,
since in some cases it could be called with a non-EDA_ITEM argument.
This was triggering an ASAN heap-buffer-overflow in GerbView.
This Merge Request creates a function called 'findKnownGerbersLoaded()'. That function in turn
calls the existing 'findNumAltiumGerbersLoaded()' and two new functions:
findNumX2GerbersLoaded()
findNumKiCadGerbersLoaded()
This approach allows a single call to detect Altium/Protel Gerbers, X2 Gerbers, and Gerbers using
KiCad naming conventions.
If it's desired to add detection of Gerbers from other EDA programs, new functions can be written
and then called from 'findKnownGerbersLoaded()'.
Fixes issue https://gitlab.com/kicad/code/kicad/-/issues/4872
Adds the ability to flip (mirror) the display, just like "Flip
Board View" does in Pcbnew.
Also added this to vertical toolbar since it's handy to not
have to go into the menu system to flip the display back and
forth.
Fixes issue https://gitlab.com/kicad/code/kicad/-/issues/2501
This API doesn't transfer ownership, so no smart pointers are required --
this just needlessly tightens requirements on the user of the interface.
(Fixes five instances of MSVC C26410 warning)
The 'Select Layer:' dialog pops up directly over the dialog with the loaded
Gerbers and hides all Gerber file names. This is just an aid so users remember
exactly which Gerber layer they're working on without having to move the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4893
This moves the program-specific code (e.g. BIU files) into
the program tests.
Also, create title_block.cpp to break a dependency that pulled
in eda_text.cpp when using the TITLE_BLOCK object.
The issue for the grid color was due to the fact there are 2 places to
store the color: the color settings and the m_gridColor GERBVIEW_FRAME member.
The worksheet color (color set to RED after a color change in layer render)
is a bit strange: looks like LAYER_GERBVIEW_WORKSHEET and LAYER_WORKSHEET
are both used to draw the worksheet.
ADDED new rectangle graphics tool for PCBNew and Footprint Editor.
Also adds rectangle tool to both Footprint Editor and PCBNew Place
menus.
The Aux Origin tool can come back once we have multi-select toobar
buttons.
Also collapses an unnecessary level out of the auxOrigin and gridOrigin
settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/2246
The m_auxiliaryToolBar manage controls, not tools, and controls need specific
management after a wxToolbar->Clear() call.
wxToolbar->Clear() does not delete controls, but stop their management.
Seth Hillbrand
Marek Roszko
Simon Richter
Jeff Young
jean-pierre charras
Jon Evans
Wayne Stambaugh
Michael Kavanagh
Dominik Wernberger
Ian McInerney
PJM
Peter Montgomery
Tomasz Wlostowski