Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
This makes sure that the declaration is always the same within a single
module, so all users have the same idea of whether the symbol is imported.
In all dynamically linked objects, all users should be aware that the
symbol is imported, while in the statically linked bitmap2component
program, no import/export decorations should be used.
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
and is being ignored. Bitmap2component does not have an icon resource on
Windows. Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
declaration for the resource file so added them.
In polygon calculations (combining polygons, fracture) the mode of calculation (fast or strictly simple polygon option) as no more a default value, because choosing the best mode is better to optimize the calculation time.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
* Many path related fixes.
* Fix execution of external applications.
* Update mac-osx.txt.
* Add top-level links for standalone applications inside OSX bundle.
* Fix document icons for Eeschema and pl_editor.
* Create individual bundles for standalone applications inside the main application bundle.
* Add usual 'site-packages' to python path in OSX bundle.
* Fix name of OSX bundle plugin folder.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
* Create GetNewConfig() and GetKicadConfigPath() to unify configuration file
creation and location.
* Move Windows configuration out of the registry into configuration files.
* Move Linux configuration files from $HOME to $HOME/.config/kicad to eliminate
configuration file pollution in the users $HOME folder.
* Fix a bug in the configuration file where the Eeschema hot keys are saved.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
Remove or move old .ico and .pgn files and add new icons (.ico files and .png files) in bitmaps_png/icons and bitmaps_xpm/icons
.png files and .ico are used to build desktop shortcuts
Handle variable size bitmaps in kicad.
* Break classes_body_item.cpp(.h) into more reasonable size bites.
* Rename classes_body_item.cpp(.h) to lib_draw_item.cpp(.h)
* Fix some unsatisfied header file dependencies.
* Add stubs to component library draw item base classe to handle editing
internally.
* Lots of code cleaning.
Seth Hillbrand
John Beard
Maciej Suminski
jean-pierre charras
Jeff Young
Jon Evans
Michael Kavanagh
Simon Richter
Wayne Stambaugh
Tomasz Włostowski
Simon Wells
Wayne Stambaugh
unknown
unknown
Bernhard Stegmaier
Moses McKnight
unknown
Dick Hollenbeck
Marco Serantoni
Lorenzo Marcantonio
marco.
Vladimir Ur
Andrey Fedorushkov