Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
In .gbrjob file, one can specify the thickness and color of some layers.
Currently, there is no way to enter these parameters.
This commit prepare a better support of .gbrjob files.
Oblong holes (slots) use now a aperture attribute similar to round holes.
(The previous attribute "slot" is now deprecated)
However they have a specific aperture, and a comment is added in drill files for these apertures.
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
Footprint library nicknames are case sensitive but the comparison for
the library tree control was case insensitive.
Also make the footprint name comparisons case sensitive as well. While
not strictly necessary, the plan is to start using the name defined in
the footprint file instead of the file name which will allow for case
sensitivity.
Fixes lp:1833701
https://bugs.launchpad.net/kicad/+bug/1833701
(cherry picked from commit d8fff5c820)
A few files snuck in with CRLF for the line endings. These make it hard
to look at diffs as every line appears to have changed. This commit
makes only line ending changes, so can be ignored
Use the wxTextValidator style flag to allow the user to clear the library
identifier string. Use wxTextValidator::SetStyle( wxFILTER_EMPTY ) to
prevent empty library identifier strings which is the current behavior.
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
Especially, small round rect pads have a ugly shape because the number of segments is
small and the 90 deg arcs are not very well approximated.
The minimal seg count for 90 deg arcs is now 4 (16 segm/circle) for pads.
Fixes: lp:1833005
https://bugs.launchpad.net/kicad/+bug/1833005
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Delete the copy ctor and assignment operator to start with, but
even then the separate apps each have their own statically allocated
copy of the common actions. So we need to update all of them, which
also means having the kicad manager frame's set of actions on hand).
This changelist also adds a Clear Hotkey Assignment function since
the hotkeys set is now likely to be sparse with respect to the
actions.
* rename WS_DRAW_ITEM_POLYGON to WS_DRAW_ITEM_POLYPOLYGONS (better name)
* use SHAPE_POLY_SET instead of std::vector(<wxPoint> to manage the set of polygons.
It also remove duplicate code related to HitTest and bounding box.
* fix HitTest and WS_DRAW_ITEM_POLYGON highlight.
Make the Show method accept any stream, default is current behaviour (stderr).
Can be used, therefore, also for stdout or even stringsteam.
Print a suitable timescale depending on the time recorded, from ns to s.
The function to pop a dialog is not really part of PROF_COUNTER,
if wanted, it can be done by the called.
This removes WX as a dep for PROF_COUNTER and profile,
which now used std::chrono only.
Also remove the print-to-stderr-with-delta function, as it's
unused too, and the delta times can be collected directly now
as std::chrono::durations if needed.
SCOPED_TIMER is a QA-only simpler version of PROF_COUNTER.
Extend PROF_COUNTER to allow access to the std::chrono::duration
for more flexibility.
Wrap PROF_COUNTER in SCOPED_PROF_COUNTER for RAII duration
output (for the same effect as SCOPED_TIMER).
These options were used to support the legacy canvas when drawing on
MacOS and GTK3. With the move to 100% GAL, they are extraneous. This
moves all DC over to "COPY" as we only use this for printing support in
Eeschema at the moment, so there is a single draw command (no erasing)
for the canvas.
This mixes the de-emphasized layers into the background color rather
than merely a black color. This also keeps some of the original layer
color.
Fixes: lp:1831316
* https://bugs.launchpad.net/kicad/+bug/1831316
Fixes a few commit issues based on the std:: rework. Add an option to
delete tracks fully in pads and makes merge tracks smarter
Fixes: lp:1787190
* https://bugs.launchpad.net/kicad/+bug/1787190
Due to an interaction with old (<1.59) versions of Boost, the ostream
operator<< for wxPoint and wxSize is requried to use
BOOST_CHECK_EQUAL_COLLECTIONS (the print_log_value<T> function is not
used by this macro until 1.59).
Because these functions are available in Debug builds, unit tests that
use such functions will break when compiled as Release or
RelWithDebugInfo.
The change here is to not disable these functions in Release builds.
Also, the functions are moved to common.h, to go with other generic
WX "polyfill" functions. Although they might be commonly used by the
EDA_ITEM::Show functions, they are not specifically related to that
class.
Fixes: lp:1830612
* https://bugs.launchpad.net/kicad/+bug/1830612
Also fixes the post-duplicate move to start at the cursor pos.
Also fixes the fact that duplicate wasn't getting its hotkey.
Fixes: lp:1830596
* https://bugs.launchpad.net/kicad/+bug/1830596
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
Sometimes we want to inflate a polygon without adding rounded edges.
This add the option using the jtMiter setting.
This is used in the Eagle parser to expand the Eagle zones for KiCad.
Eagle Zones are drawn on the polygon edge, so they extend out from the
outline. KiCad zones are drawn inside the polygon. We need to both
increase the zone size and decrease the minimum pen width to account for
this.
Fixes: lp:1817312
* https://bugs.launchpad.net/kicad/+bug/1817312
This commit redirected too many menuitem IDs to the tool manager.
Only some context menu items have to be redirected, not all inside ACTION_EVENT events.
This hack is not perfect. It needs a better handling of ACTION_EVENT handling.
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Remove the axis numbering code from ARRAY_OPTIONS
and place in a new class, ARRAY_AXIS. This keeps
the logic for the array item numbering separate from
the logic for the array item geometry.
This simplifies the logic in the ARRAY_OPTIONS class, which
no longer has to deal with the numbering of each axis.
Replace INCREMENTAL_TEXT_CTRL with wxSpinCtrlDouble because it looks
and works better.
Remove INCREMENTAL_TEXT_CTRL header and source files because the only
place they were used was in GAL_OPTIONS_PANEL.
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
Provide a toolkit-agnostic interface for "busy indicators", which
allows the 3D viewer to show a busy cursor, without the canvases
having to to know how a wxCursore works.
The motivation here is to decouple the 3D renderers from the WX
GUI system, as they can then be used when when there is not an
active window (e.g. for offscreen rendering).
Otherwise, attempting to use a wxBusyCursor without a GUI
available is an instant segfault.
Prevent user from pasting text with carriage return and/or line feed
characters in field value edit control in the schematic symbol and symbol
library properties dialogs.
Make all objects derived from GRID_CELL_TEXT_BUTTON use validators
correctly.
Add validators to FIELDS_GRID_TABLE object for field values other than
the mandatory fields.
Create a validator to check that a string is a valid LIB_ID.
Fixes lp:1828214
https://bugs.launchpad.net/kicad/+bug/1828214
This is mainly the solder paste layer that shows this issue.
This is due to the fact SHAPE_POLY_SET::Inflate does not work fine with polygons with linked holes.
SHAPE_POLY_SET::InflateWithLinkedHoles it added to fix this issue.
Fixes: lp:1828287
https://bugs.launchpad.net/kicad/+bug/1828287
It was confusing that the primary frames registered their tools
differently than the other frames. In addition, since the other
frames also added their own tools, foo_actions::RegisterAllTools()
didn't really register all tool but rather those used by the
principal frame (PCB_EDIT_FRAME, SCH_EDIT_FRAME, etc.)
Force the symbol library links whenever the symbol library table has been
modified. This will use the cache as a fallback when a library has been
removed that contains links in the schematic rather than display.
Fix the SCH_COMPONENT symbol resolver when falling back to the cache. The
resolver was using the LIB_ID ':' notation which was failing. Replacing
':' with '_' fixed this issue. This was also an issue when generating the
symbol message panel information.
Convert wxLogDebug to wxLogTrace in symbol resolver code path. Add new
trace type KICAD_SYM_RESOLVE.
Fixes lp:1821606
https://bugs.launchpad.net/kicad/+bug/1821606
This allows a const BITMAP_BASE to expose const image
data. This is currently done with const_casts, which is
"OK", only as long as the source image is not declared
const, in which case it's undefined behaviour.
Also immediately dereference the pointer to a reference
if it's not checked to make the non-null requirements
explicit at the point of access.
When utilizing the standard iterator container, we may have polygons
with an empty outline (these are generated by gerbview to pcbnew). This
should register as the end of the iterator to prevent dereferencing
The wire image undo/redo option required special handling and was only
used in a single location. Replacing with single change handling
reduces the code complexity
Give the user the option of cancelling a file open if there are
segment zones; otherwise they're converted to polygon fills.
Fixes: lp:1823087
* https://bugs.launchpad.net/kicad/+bug/1823087
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
This allows setting the config dir at build time, providing packagers a
method of controlling where the configuration files are placed.
Fixes: lp:1780601
* https://bugs.launchpad.net/kicad/+bug/1780601
This allows us to make the various netlist and pcb update routines
more atomic and less reliant on carefully sequenced asynchronous
messages.
This is also a prelude to adding support for footprint testing
without a netlist.
For legacy boards, the setting is picked up from the board outline
thickness. If the board outline has mixed thicknesses, then the
max is used and a warning is displayed.
Fixes: lp:1797787
* https://bugs.launchpad.net/kicad/+bug/1797787
Statically constructing wxCursors as used for the probe
and tune cursors crashes the qa_eagle_plugin test
instantly.
Fix this by introducing a new class CURSOR_STORE,
which allows to abstract the platform wierdness of wxCursors
and allow the simulator to laziliy init its own cursors
at runtime.
This code isn't properly tested, as these cursors are never
actually used. However, it does allow the eeschema unit test
to run.
Fixes: lp:1781191
* https://bugs.launchpad.net/kicad/+bug/1781191
They don't really help any, and they confuse some users into
thinking they need angle brackets around real values.
Fixes: lp:1821601
* https://bugs.launchpad.net/kicad/+bug/1821601
Save/restore default netclass.
Read layers back in with correct syntax ('.' between keyword and layer name).
Write layers to project file.
Read/write layer enablement bits.
Don't set solder paste margin min to 0 (most of them are negative).
Fixes: lp:1811990
* https://bugs.launchpad.net/kicad/+bug/1811990
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
First, add automatic detection of toolkit DPI scaling options. For now, this
is, in order,
* Check the GDK_SCALE option under GTK+ (users can set this to force the scaling)
* Check the value from WX's GetContentScalingFactor(). This will start to work
correctly from WX 3.1 and GTK+ 3.10.
Then, add a user-settable override in the main prefs panel, next to the icon
scaling. This is independent of the icon scaling options.
DPI handling is performed in a standalone class, so they can be shared between
the prefs UI and the OpenGL backend easily. Also means Cairo could use the same
interface in future.
Also adjust the OpenGL grid drawing code to use the computed scale factor,
which avoids over-thick grids in scaled environments (the user can manually
thicken the grid if wanted).
Fixes: lp:1797308
* https://bugs.launchpad.net/kicad/+bug/1797308
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
Disable the text update event for the orientation cutom value field before
updating it when the radio buttons are selected. This allows to use the
conventional EVT_TEXT handler, rather than KEYDOWN, which has two effects:
* Tabbing though the dialog no longer sets custom orientation
* Click-driven clipboard actions trigger the update correctly.
Introduce a helper function in validators.h to assist in updating
validated fields without triggering further events.
Fixes: lp:1819006
* https://bugs.launchpad.net/kicad/+bug/1819006
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
The folder button handler works will for footprint libraries but we
needed a specific class for the schematic libraries as well.
Fixes: lp:1818346
* https://bugs.launchpad.net/kicad/+bug/1818346
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
Introduce a shortcut method to set tab ordering and use it in
the dialogs that override the tab traversal orders:
* Eeschema sheet properties
* Pcbnew Move exact
* Pcbnew Move relative
Also set some initial focus fields in the same dialogs.
Tidy a few includes.
Fixes: lp:1816009
* https://bugs.launchpad.net/kicad/+bug/1816009
GTK3 provides for additional input devices via xinput2. These include
touchscreens and continuous scroll devices. But wxWidgets does not have
specialized handlers for these events, so they double up for some
devices. Until wxWidgets allows us to handle these events, we specify
that the input handler should be the old-style GDK_CORE.
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
The extra wx/gal debug statements are called on initialization but are
not used. Removing the printf prevents statements outputting that may
confuse end users
When re-drawing or re-caching all items, we need to search the full
rtree, including for those items that live outside of the limits of
BBOX2I. This forces the maximum BBOX2I to the full RTree limits
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
* Make LIB_TABLE_BASE::GetCount() return unsigned. This is more
consistent with the behaviour of STL containers (especially the
boost::ptr_vector this is really accessing). Sadly
wxGridTableBase() forces an int, so a cast is still required
at the WX interface.
* Make LIB_TABLE_BASE::At() return a reference. First, this is more
consistent with normal STL indexing operator[]'s, and secondly, it
allows an idiomatic const index method (so you can access const
LIB_TABLE_ROWs from a const LIB_TABLE_BASE).
The motivation is to allow use of this class and LIB_TABLE_ROW
in a test program, where the LIB_TABLE_BASE is const.
Some basic tests on LIB_TABLE and LIB_TABLE_ROW that demonstrate
the behaviour of fallbacks and various access methods.
Also add a few LIB_TABLE_BASE comments and changed some NULLs to
nullptr.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
Circles and Squares are handled correctly. Octagons are converted to
circles. Pad 1 is identified by the "1" string in the Eagle name.
Fixes: lp:1784126
* https://bugs.launchpad.net/kicad/+bug/1784126
Uses existing grouping in SVG output. Sets schematic components as a
grouped element in SVG as well as pcbnew elements per layer.
Fixes: lp:1011754
* https://bugs.launchpad.net/kicad/+bug/1011754
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The CONFIG_SAVE_RESTORE_WINDOW class does not need to be tied
to the array dialog, put it in common/widgets.
Also do a refactor and tidy-up of the the class, use a union for (slightly)
better type-safety and syntax (a variant would be better but that's C++17).
Also enable integral field save/restore from text boxes.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
ClipperLib::Path is std::vector<IntPoint>. Iterating this with
"for( auto point : path)" could result in 'n' IntPoint copy-constructions.
It does seem GCC 8, at least, manages to optimise these constructions
out.
Replace with the "standard" for( const auto& point : path) idiom.
When prompting for a new footprint library, we need to treat the input
as a file for creation rather than a directory for selection.
Otherwise, users cannot specify the name of their new footprint library
independently of the existing directory names.
Fixes: lp:1812135
* https://bugs.launchpad.net/kicad/+bug/1812135
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
CHANGED: By default dialog closes on Esc key immediately and if dialog
has a grid control there is no way to close a cell editor with canceling
changes. New behavior is next: if dialog has a grid and the grid has an
active cell editor Esc key closes cell editor, otherwise Esc key closes
the dialog.
When removing steiner points, there is the possibility that the test
point is also removed. In this case, it is no longer a member of the
linked list and will break the output.
The test for re-fracturing a broken polygon can also result in multiple
polygons, rather than only 0 or 1. Skipping the extra polygons will
result in a limited tesselation.
Fixes: lp:1812393
* https://bugs.launchpad.net/kicad/+bug/1812393
This issue created memory leak and not working wxComboboxes (for instance after modifying the language selection).
Now, these wxComboboxes are created only once, never recreated.
Also: minor cosmetic enhancement in footprint editor main toolbar
(the save footprint icon is modified if the footprint is saved to the board or to the library)
The config was saving a canvas type EDA_DRAW_FRAME member not always accurately initialized.
And the last canvas opened frame setup was saved, not necessary a frame having a canvas type that can be set by user.
This is a broken feature especially because the footprint viewer has a fixed canvas setting.
The canvas type might change without the frame being notified. If this
happens, the user is presented with repeated notifications of OpenGL
issues. Howver, switching canvas is not an error and should be
presented to the user as an info message to clarify that the system is
still working but it has changed how it renders the screen.
Fixes: lp:1795240
* https://bugs.launchpad.net/kicad/+bug/1795240
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
The application warps the cursor when initiating some actions (dragging,
selecting modules or Find and Move). This warping should not also
trigger the autopan action.
Fixes: lp:1810787
* https://bugs.launchpad.net/kicad/+bug/1810787
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode. This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.
This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
wxChoice centers the selection on GTK. So when switching from a
mid-list item to an item at the top, the list is always cut off for
choice lists located on the top toolbar. Using a combobox provides a
drop-down that allows easier access to all elements in the box.
Fixes: lp:1808569
* https://bugs.launchpad.net/kicad/+bug/1808569
It avoid including these extensions in a translatable string, thus avoid breaking filter
if the translation is incorrect (It happens sometimes).
See wildcards_and_files_ext.cpp for use.
This make the use of legacy canvas on GTK3 a default-off
advanced config. Legacy is substantially broken on GTK3
and is of basically no use at all to general users on this
platform.
If the program starts with legacy canvas in the config,
it is forced into a GAL mode, as otherwise it could happen
that the user is stuck and unable to get into pcbnew to change
the setting.
Fixes: lp:1803156
* https://bugs.launchpad.net/kicad/+bug/1803156
This can be used for "advanced" options which are for developers
to use for feature-flags and other configuration. Run time config
has some advantages over preprocessor defines:
* Can be changed without recompilation
* Sensitive to XDG_CONFIG_DIR, so flipping configs is easy
* Better compiler coverage (less conditionally compiled code means
less chance to break a different configuration). Also better
analysis coverage.
* Type safe config params
* Centralised documentation: it's in doxygen, in one place
No advanced config should be required by a general users. If a general
user does use one of these configs, it's probably because:
* There is a bug and one of these configs is a workaround
* A config in here is generally useful and should be moved into the
relevant application config and given UI.
For now, the config is read-only, and is read from the
"kicad_advanced" config file in the normal config dir.
Rather than depend on proper unlocking for each exit, we move the
connectivity lock mutex into an RAII-type configuration that
automatically unlocks on exit.
The fracture() call may result in zero polygons remaining, which will
cause failure in our tesselation routine, so we need to check whether
this is a valid POLYGON before re-tesselating.
Tesselation can fail for a number of reasons. When this happens, we set
the triangulationValid flag to false to prevent using the broken
triangulation. This will fall back to the slow OpenGL triangulation
when DrawPolygon is called.
Use TesselatePolygon() to draw polygons in Gerbview instead of GLU tesselation, much slower.
Add helper methods in GAL to know if the current GAL engine is Cairo, OpenGL or something else,
useful to optimize drawing code.
Append the appropriate file extension to the file name if the file name
does not have a file extension. This is a know issue with the GTK+ file
dialog.
Make the last 3D viewer screenshot last file used code more coherent.
Add the 3D viewer main frame trace string to the trace environment
variables doxygen group.
Doxygen comment and other minor code cleaning.
Fixes lp:1804980
https://bugs.launchpad.net/bugs/1804980
GTK3 smooth scrolling is enabled by wxWidgets but not to the exclusion
of normal scroll up/down events. wxWidgets maps these both to the same
scroll handler and will fire them both if they are not handled before
being queued. Testing timestamps allows us to mark and ignore the
dupes.
This is set to GTK3 only for now as it isn't listed as a problem for
other platforms. But it shouldn't cause issues if it is enabled
elsewhere in the future.
This adds a check for contiguous board outlines to the DRC. It also
uses the calculated outline to ensure that traces are not crossing the
outlines.
Fixes: lp:1648055
* https://bugs.launchpad.net/kicad/+bug/1648055
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
This syncs the "All" checkbox with the state of the report options such
that selecting "All" automatically selects the other boxes and
deselecting a box results in the "All" box also being unselected. This
allows a single click filtering of report messages.
Fixes: lp:1796992
* https://bugs.launchpad.net/kicad/+bug/1796992
This makes using Scrollbars more easy to use, especially for "small" page sizes like A or B.
Note also the working/drawing area size is bigger than the page size (3 times)
Factor out save current canvas view to image file code from symbol editor
code so it can be used anywhere.
Add ability to save to any image format supported by wxBitmapType. See
https://docs.wxwidgets.org/3.0/gdicmn_8h.html#a90a1eb6d85b5044a99b706fd979f27f5.
Currently only PNG output is implemented.
Please note that there is a minor bug that appears to be due to the
scroll bars which causes unfilled areas on the right and bottom edges
of the image. This always existed in the save symbol editor view
image but it was not as noticeable because by default the background
color is white. It is very noticeable in the footprint editor with
a black background.
The usual smattering of coding policy and comment fixes.
Fixes lp:1802127
https://bugs.launchpad.net/kicad/+bug/1802127
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
Jeff Young
jean-pierre charras
Thomas Figueroa
Seth Hillbrand
Wayne Stambaugh
Ian McInerney
Steven A. Falco
John Beard
Jon Evans
MaPePeR
Michael Kavanagh
Jean-Samuel Reynaud
Tomasz Włostowski
Jiaxun Yang
Baranovskiy Konstantin
Fabián Inostroza
Maciej Suminski