Jeff Young
f480cbf93f
Treat internal copper layers as side-specific.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-25 12:08:57 +01:00
Jeff Young
4778122aa0
Flip anything on a side-specific layer, rather than physical layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-24 16:54:33 +01:00
Jeff Young
cef7cd8f7c
Move default font to RENDER_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12723
2022-10-22 21:32:42 +01:00
Jeff Young
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
Jeff Young
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
Jeff Young
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
Jeff Young
e866dfe137
Avoid trying to draw empty pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
2022-10-09 20:28:54 +01:00
Jeff Young
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
Jeff Young
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
Marek Roszko
61e11d6896
Strip out Mils2Iu
2022-09-16 21:09:27 -04:00
Marek Roszko
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
Jeff Young
aa0863cdf4
Don't mirror text on non-physical layers when in flip board view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10037
2022-09-16 00:46:14 +01:00
dsa-t
bd8b737c44
GAL: Do better job at reserving vertices.
2022-09-14 16:07:47 +00:00
Jeff Young
281b9d405a
ADDED ability to specify where pad number (& net name) go on custom shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
Jeff Young
9523586bf1
Remove atrophied PCB NO_CONNECTS layer and its colour.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12316
2022-09-08 00:28:31 +01:00
Jeff Young
16b4f96405
Centralize no-connect- and free-pad processing.
...
Also makes the track-net-names less squirrelly around the viewport
edges.
2022-09-06 13:59:52 +01:00
Jeff Young
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
Jeff Young
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
jean-pierre charras
a306246558
Fix a few (minor) compil and Coverity warnings.
2022-08-25 20:21:00 +02:00
Jeff Young
ae86c6f3a7
Don't include text in locked-item-shadow-calc for footprints.
...
And make shadow margins consistent for all objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/11545
2022-08-24 10:30:20 +01:00
Jeff Young
6cfbf895fc
Make sure parent pos is factored in for polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11945
2022-08-16 17:28:56 +01:00
Jeff Young
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
Jeff Young
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
Jeff Young
e10158ff10
ADDED show pin names on footprint pads when assigning to symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4576
2022-07-24 23:41:41 +01:00
Jeff Young
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
jean-pierre charras
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041
moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
Jeff Young
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
Mike Williams
f8b157a1fb
PCB: Bitmaps should respect layer opacity and highlighting options
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12045
2022-07-20 14:59:19 -04:00
Seth Hillbrand
c8a383a48e
Get via font fill/color correct when highlighted
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11802
2022-07-15 11:40:46 -07:00
Mike Williams
99f8b21ed1
PCB: Add bitmap layer per board layer
2022-07-14 11:23:23 +00:00
Mike Williams
3669cb4673
PCB Editor: Add User Background Images
2022-07-14 11:23:23 +00:00
Jeff Young
231ac567b8
Bug fixes for printing vias.
...
Blind/buried and microvias didn't get their layers trimmed properly,
nor did through vias with dropped pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/11851
2022-06-19 11:58:21 +01:00
Jeff Young
fa11e1c097
Take text height into account as well as thickness for knockout margin.
...
Also centralizes calculation so all clients will get the same answer.
Fixes https://gitlab.com/kicad/code/kicad/issues/11636
2022-05-20 12:29:01 +01:00
jean-pierre charras
57e59a4959
Pcbnew, on line DRC when moving footprints: add visible collisions between courtyards
2022-05-20 12:58:05 +02:00
Jeff Young
cc86d3da2a
Give up trying to find a one-size-fits-all boudningBox for text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11636
2022-05-18 17:14:57 +01:00
Jeff Young
492259a1d4
Outline font bug fixes for PCBNew dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11583
2022-05-06 18:14:25 +01:00
jean-pierre charras
1d5be1adeb
Cairo GAL: fix incorrect size and thickness of text drawn by GAL::BitmapText()
2022-04-08 18:40:26 +02:00
Jeff Young
90af5a36d2
Show hole clearance lines around NPTH pads.
...
Also make the clearance line NONPLATED_HOLES colour, not the PADS_TH
colour.
2022-04-04 10:28:33 +01:00
Jeff Young
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
Jeff Young
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
Jeff Young
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
Jeff Young
e03b06927d
Fix rotation problems for knockout fp text, and implement 3D rendering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11086
2022-03-12 14:17:52 +00:00
jean-pierre charras
0440aa3d83
Extend layer LAYER_LOCKED_ITEM_SHADOW to draw shadow markers on other locked items:
...
tracks, texts, graphics.
2022-03-09 18:50:31 +01:00
jean-pierre charras
016af235db
Pcbnew: add a GAL layer (LAYER_LOCKED_ITEM_SHADOW) to draw markers on locked footprints
2022-03-09 17:54:58 +01:00
Jeff Young
40fd8860fe
Plotting (and some bug fixes) for knockout text.
2022-03-08 18:06:41 +00:00
Jeff Young
293021c58c
ADDED: knockout pcb and fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7055
2022-03-08 13:22:20 +00:00
Jeff Young
bf0f2aa4a8
Adjust bitmap text spacing a bit so it's closer to the stroke font.
...
This helps the text better match the highlighting when it gets small
enough that we switch to the bitmap font for performance.
2022-03-07 20:30:50 +00:00
Jeff Young
513486b0ec
Overhaul show no-net indicators logic.
...
It doesn't appear that it was ever finished the first time around.
Fixes https://gitlab.com/kicad/code/kicad/issues/11020
2022-03-02 18:28:39 +00:00
Jeff Young
69a6033905
Hysteresis for track netnames.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10416
2022-02-28 21:11:01 +00:00
Jeff Young
5544dd8018
Don't call GetLayer() on a multi-layer object.
2022-02-21 00:08:43 +00:00