cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
caa18c8e16
Fix bugs in diffPair hole-to-hole logic and add rule resolution.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
2021-02-25 14:23:02 +00:00
fa89263c8f
Push hole-to-hole min processing down a level.
...
Also removes adding the track width to the via gap, which was
never right.
Fixes https://gitlab.com/kicad/code/kicad/issues/7173
2021-02-24 21:42:00 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
c0a9742b3a
Apply 0ef63aca47 to diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-12 03:43:41 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
fe8524b9bb
Update DIFF_PAIR_PLACER to new callbacks
...
Needs to handle changes to PNS_ROUTER. This does not implement
springback or backspace in DIFF_PAIR_PLACER, only allows committing
lines as before
Fixes https://gitlab.com/kicad/code/kicad/issues/3988
2020-03-04 17:23:04 -06:00
8c19b4b6ae
pcbnew: Adding arcs to PNS
...
This is allows ARCs in tracks to be synchronized with
the PNS router. Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
1d09f84303
router: Take track width in dp from dp
...
Fixes and issue where forces were calculated using the current track
width even in differential placer mode where the tracks are specified by
the differential pair width.
Fixes: lp:1814480
* https://bugs.launchpad.net/kicad/+bug/1814480
2019-02-04 03:48:08 +01:00
1d230bbee9
very minor fixes to help I18n translations (remove trailing spaces)
2018-12-20 20:19:45 +01:00
bdc64ff0b3
router: DP_GATEWAYS::FilterByOrientation() should have exactly opposite filtering condition!
...
Fixes: lp:1797914
* https://bugs.launchpad.net/kicad/+bug/1797914
2018-10-18 14:29:19 +02:00
eea949ce0a
router: don't cross DP lines when length tuning, fix swap pair polarity bug
...
Fixes: lp:1798500
* https://bugs.launchpad.net/kicad/+bug/1798500
Fixes: lp:1798221
* https://bugs.launchpad.net/kicad/+bug/1798221
2018-10-18 13:48:43 +02:00
57ceec5606
pcbnew: Allow DRC violations when requested in dp
2018-10-02 14:39:53 -07:00
101b68b610
pcbnew: Keep dp placer on initial layer
...
Changing the layer after starting the differential pair placer should
not change the inital track layer.
Fixes: lp:1779800
* https://bugs.launchpad.net/kicad/+bug/1779800
2018-07-03 08:23:16 -07:00
f6f726acab
router: allow placing tracks/diff pairs without continuing routing by Shift+L-Click
...
Fixes: lp:1777688
* https://bugs.launchpad.net/kicad/+bug/1777688
2018-06-19 19:30:03 +02:00
44c1f5785b
pcbnew: Set dp clearance based on netclass
...
Minimum differential pair clearance should be limited to the netclass
differential pair spacing. This also cleans up some unused code that
was left over from previous work on differential pair clearances.
Fixes: lp:1673632
* https://bugs.launchpad.net/kicad/+bug/1673632
2018-06-18 14:23:25 -07:00
2bd0a027a2
Improved error messages for diff-pair routing.
...
Fixes: lp:1542592
* https://bugs.launchpad.net/kicad/+bug/1542592
2018-05-19 01:52:22 +01:00
b43dc7954c
fix code after renaming files
2018-01-30 15:34:09 +01:00
20b4226a25
Router recognizes busses of differential pairs
...
Fixes: lp:1443330
* https://bugs.launchpad.net/kicad/+bug/1443330
2017-06-30 11:16:24 +02:00
96a3145543
use unique_ptr at client <-> pns-router border, to document the pns router is taking ownership
...
add overloads for NODE::Add( ... ) taking pointers to specific item types (retain old private add-Functions, they will come in handy later)
LINE overloads now take by reference, to document their special treatment.
updated code throughout affected by these changes
2016-09-06 16:06:06 +02:00
6c749e0ba8
Remove PNS_ prefix from most types inside namespace PNS
2016-09-06 16:06:06 +02:00
4cf44d9725
Rename pns item kind constants in preparation for renaming pns classes
2016-09-06 16:06:06 +02:00
de6281e977
Move PNS router code into namespace PNS
...
update copyright messages
2016-09-06 16:06:06 +02:00
ca499b80e1
Fixed wxLogTrace() calls in PNS
...
Fixes: lp:1616702
* https://bugs.launchpad.net/kicad/+bug/1616702
2016-08-25 09:24:55 +02:00
78050c05e2
Changed PNS logging routine to wxLogTrace
2016-08-17 16:00:21 +02:00
7e94e5282a
Changed PNS debug output to use wxLogTrace
2016-08-15 17:16:54 +02:00
0ef866ee74
Code formatting
2016-08-15 17:16:53 +02:00
a53ea81794
P&S: factor out Kicad-dependend PNS_ROUTER::SnapToItem() to the PNS_TOOL_BASE class
2016-08-15 17:16:51 +02:00
a2ac1cd087
P&S: cleaner placement of DP segments/vias. Speed improvements too.
2016-08-15 17:16:49 +02:00
7e0caf7abe
[pns] Make the placer algo draw debugging stuff by relying on a new PNS_DEBUG_DECORATOR, this removes a reversed dependency b/w PNS_ROUTER and PNS_ALGO Tom: some rework of the patch
2016-08-15 17:16:48 +02:00
9c8bdcc894
P&S refactor: removed most of Kicad-dependent code from PNS internal classes
2016-08-15 17:16:47 +02:00
1b2fd6a382
Replace BOOST_FOREACH with C++11 range based for.
2016-06-29 16:07:55 -04:00
a30c8d7848
Coverity fixes.
2016-05-11 11:18:27 +02:00
b4fd9f3ed5
router: pick similar starting shapes for the diff pairs, not the very nearest one
2015-10-07 19:26:33 +02:00
2607497b37
Code formatting.
2015-10-05 18:28:41 +02:00
f13208dc04
router: Display an error message when trying to place diff pair tracks that violate design rules.
2015-09-30 13:37:19 +02:00
f752f7875e
Code formatting.
2015-09-30 11:18:19 +02:00
b4135e0a33
router: fixed snapping to target while placing diff pair
2015-08-21 16:35:34 +02:00
Jon Evans
Jeff Young
Dominik Wernberger
Seth Hillbrand
Seth Hillbrand
jean-pierre charras
Tomasz Włostowski
hauptmech
decimad
Maciej Suminski
Christian Gagneraud
Simon Richter