On some platforms like MSVC, NaN prints as "-nan(ind)". This
is a bit needlessly ugly, so print "NaN" on all platforms
consistently.
This fixes a test failure on MSVC.
Also provide a utility function to get this path, and
a way to override at run time to quickly sub in alternative
data.
The test itself is still broken, as this plugin won't accept
a call to Load() without a KiWay.
Redesignate the eagle test as eeschema tests and build
more like the other unit tests.
Enable as a test in Ctest now that the test executes without
crashing.
The loading of the file with the hardocded part is still
not enabled, as this needs more infrastructure to support it.
Before Boost 1.64, there was no test logging function
for std::nullptr_t.
Add a logging struct to Boost to deal with this, and some
macros to assist in similar cases. These macros are bit
untidy-looking, but due to GCC bug #56480, we can't use
namespace aliasing to solve this. From Boost 1.64 onwards,
these namespaces are not needed at all.
Remove some code added to work around lack of nullptr printing
in the past.
These macros, and the nullptr printer, can be removed when
the Boost min version is 1.64 or greater.
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
Add some tests of the filename splitting of WX_FILENAME objects.
Interestingly, the result of GetFuillPath on an empty path is
likely wrong as it will imply an absolute path from /. But this is
probably not a used code path. Document the current behaviour as passing
the test.
This unit tests covers the code reported by Coverity 183884 and 183894
(improper use of negative). The find_last_of can return "npos" (-1), but
it's stored as a size_t. This is correct according the WX docs,
and the substr() method it is passed to can handle npos too.
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
The using the "first available" numbering option, force an
artifical linear numbering scheme starting at '1'.
Start the pad name provider at the 0'th pad index.
Also adds a few related tests and adjusts tests affected by
this change to reflect that the offset still applies.
This can be expanded in future to be more general by skipping
pad (which would allow a custom start and numbering scheme
while still avoiding duplication), but for now,
this does what the UI says and avoids string changes in 5.1rc.
Fixes: lp:1814918
* https://bugs.launchpad.net/kicad/+bug/1814918
Fixes: lp:1814917
* https://bugs.launchpad.net/kicad/+bug/1814917
* Make LIB_TABLE_BASE::GetCount() return unsigned. This is more
consistent with the behaviour of STL containers (especially the
boost::ptr_vector this is really accessing). Sadly
wxGridTableBase() forces an int, so a cast is still required
at the WX interface.
* Make LIB_TABLE_BASE::At() return a reference. First, this is more
consistent with normal STL indexing operator[]'s, and secondly, it
allows an idiomatic const index method (so you can access const
LIB_TABLE_ROWs from a const LIB_TABLE_BASE).
The motivation is to allow use of this class and LIB_TABLE_ROW
in a test program, where the LIB_TABLE_BASE is const.
Some basic tests on LIB_TABLE and LIB_TABLE_ROW that demonstrate
the behaviour of fallbacks and various access methods.
Also add a few LIB_TABLE_BASE comments and changed some NULLs to
nullptr.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
SEG collisions and distances are a fundamental part of SHAPE collision testing
and are therefore critical for DRC correctness.
Also a few Collinear tests.
This function was incorrectly processing refdeses like "U1000".
Change the algorithm to a simpler STL-compatible one and
update the tests.
Fixes: lp:1813669
* https://bugs.launchpad.net/kicad/+bug/1813669
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The current module cannot be queried for existing pads as we
add them (because we never commit, until we finish the whole array).
Instead, pre-gather the names and check as we add, skipping any existing
names.
Note: this will not prevent arrays becoming "mis-ordered", but there
is not a lot we can do to prevent all possible errors.
Fixes: 1808706
* https://bugs.launchpad.net/kicad/+bug/1808706
The same principle could be used to skip existing ref-des'es on PCBs.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
Move into own include directory for clarity. Also allows qa_utils
to use its own private headers in qa/qa_utils without exposing them
through the target_include_directories directive.
This test assumed points on a edge are counted as colliding.
This is not true: points on an edge are NOT counted at inside
the poly_set.
THe test does still consider points on a *hole* edge as collisions.
The API to SHAPE_POLY_SET is unclear on if this is correct.
Several pcbnew_tools utilities read a file from the command line.
Instead of replicating this code, centralise the code in
qa_pcbnew_utils, which allows simpler reuse.
THe utilities are:
* polygon_triangulation
* polygon_generator
* drc_tool
pcb_parser keeps its own function, as that is the focus of the tool,
and its likely to have its own instrumention.
This also adds the ability to read from stdin for the above tools,
which means fuzz testers could theoretically work with them, and it
also can make life easier if you can pipe a board to the executable
directly.
The "refactor" element of qa_shape_poly_set_refactor has been
previously removed, so these tests are now just regular tests on
libcommon classes. These can therefore be moved to qa_common
and the qa_shape_poly_set_refactor unit test suit can finally be
totally removed.
This adds a simple unit test to qa_common to check coroutines
produce expected events in the right order.
This is an automated analogue to the user-facing tool in
qa/common_tools.
This program has been disabled for some time, but it's not
broken (even if the CMake was!).
Merging into the pcbnew_tools QA program reduces the CMake burden
and puts this tool in the same place as the others.
This means all the current Pcbnew utilities are all in a single
executable.
The tool is now run by:
$ qa/pcbnew_tools/qa_pcbnew_tools pcb_parser <same arguments as before>
Add a tool that allows a user to run DRC functions
on a given KiCad PCB file.
The first available functions are the courtyard functions.
Also move most of the utility program logic into qa_util for
better reusability.
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
This reverts commit decc7ed888.
This compilation options (-fpermissive) is no longer needed,
as the code that caused the warnings on GCC <7 is no longer
present.
The reason this error was GCC bug #56480 [1], which disallowed
the following (valid, in C++11) syntax:
template<> struct namespace_a::namespace_b::a_struct<TYPE>
{...}
And instead insisted on:
namespace namespace_a {
namespace namespace_b {
template<> struct a_struct<TYPE>
{...}
}
}
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
An unhappy conjunction of GCC bug #56480 [1] and Boost having
different namespaces for the print_log_value make it quite
ugly to support this method.
For the limited purposes of the unit tests, a free function in
the unit_test_utils header (in the absence of any implementation
in the main libraries) will do, even if it is a little intrusive.
From Boost 1.64 onwards, the customisation point boost_test_print_type
is avaiable, and anyt print functions should be transitioned over to
that method when the minimum Boost version is 1.64 or higher.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480
Seth Hillbrand
John Beard
Michael Kavanagh
Wayne Stambaugh
jean-pierre charras
Tomasz Włostowski
Jeff Young