Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
Move the camera out to its own so that everything else is board-
related, and then rename BOARD_ADAPTER.
At some point the flags should probably be moved out too, and they
can have the EDA_3D_SETTINGS name.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
* Make the events generated by the selection of context menu items
have the position where the menu was opened
* Ensure that TC_COMMAND type events have their position set to
be the cursor position where the event originated
This allows rapid debugging of the coroutine memory issues. It moves
the default stack size to 256 * 4096 = 2^20, which will utilize full
pages on all architectures.
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
Our coroutine system can make debugging memory issues harder by not
following a standard stack allocation system. We can get around this by
using valgrind's built-in stack instrumentation. Each coroutine
registers a stack allocation allowing memcheck to recognize when
accesses are bounded.
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Delete the copy ctor and assignment operator to start with, but
even then the separate apps each have their own statically allocated
copy of the common actions. So we need to update all of them, which
also means having the kicad manager frame's set of actions on hand).
This changelist also adds a Clear Hotkey Assignment function since
the hotkeys set is now likely to be sparse with respect to the
actions.
It was confusing that the primary frames registered their tools
differently than the other frames. In addition, since the other
frames also added their own tools, foo_actions::RegisterAllTools()
didn't really register all tool but rather those used by the
principal frame (PCB_EDIT_FRAME, SCH_EDIT_FRAME, etc.)
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.
This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.
The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
Many operations on the selection involved getting an item by index or
dereference. The std::set needed to iterate from the beginning of the
set to find the item in its red-black tree. Using a deque that we keep
sorted, we get index access in O(1) and item search in O(lg N).
Getting the position of a non-position TOOL_EVENT will
now result in a wxCHECK, and a null-position (0,0) will
be returned. The new interface HasPosition() can be used
to determine if a call to a position function is safe to
make from the caller.
Fixes the underlying danger behind lp:1796045, which has
already been neutralised by a4966adb6, which avoids calling
the Position() functions when the TOOL_EVENT is not known
to be a position.
Fixes: lp:1796045
* https://bugs.launchpad.net/kicad/+bug/1796045
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
Jeff Young
Fabien Corona
Jon Evans
Seth Hillbrand
Wayne Stambaugh
Marek Roszko
Ian McInerney
Tomasz Wlostowski
Johannes Pfister
Alexander Shuklin
Seth Hillbrand
Michael Kavanagh
jean-pierre charras
Thomas Figueroa
John Beard