- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
To use multiple working threads. This entailed adding KiCad typedefs:
*) Add typedefs for MUTEX and MUTLOCK which mask the actual choices for the project.
*) Add FOOTPRINT_LIST::DisplayErrors( wxWindow* ) which is a single strategy for
showing aggregated load errors. Although what's there is only scaffolding
and needs a volunteer who knows HTML pretty well.
*) Ensure all callers of ReadFootprintFiles() use the new DisplayErrors() function.
*) Push utf8.cpp and utf8.h into common library for open use.
* Pcbnew: catch exceptions when saving changes to footprint library table.
* Pcbnew: update footprint viewer library list if open when footprint library
table changes.
* CvPcb: update library list when footprint library table changes.
* Minor coding policy fixes.
This response file is not expanded under mingw3 2 (mingw/gcc bug?), and the list of include paths, found in this file, is not taken in account.
Now, under mingw32+msys, when not cross-compiling, the response file is disabled.
Cvpcb, Pcbnew: fix a list of libs which should be added only when cross-compiling:
Previously, they were always added, which creates an issue with mingw/msy/ gcc 2.8.
Now they are added only when cross-compiling (this issue was noticeable only with msys+mingw version 2.8)
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
*) Set environment variable KISYSMOD before loading FP_LIB_TABLE so that
FP_LIB_TABLE::ROW::SetFullURI() can do substitution up front.
*) De-emphasize the lib path in some of the footprint frames but keep it
so the footprint editor can export a current library to another.
You can even export a GITHUB library to a pretty library for local
installation.
*) Start the PLUGIN options editor.
*) Enhance cursor positioning in DIALOG_FP_LIB_TABLE.
* Add save table and set project path environment variable code to
FP_LIB_TABLE object.
* Add code to Pcbnew and CvPcb to set project path environment variable.
* Create empty footprint table in Pcbnew when new board created.
* Save current project specific footprint library table to path on file save
as or empty project path.
* Fix a bug in Pcbnew in file save function that would silently overwrite
an existing board file.
* Disable selecting the current library in the module editor when there are
no libraries defined.
* Catch exceptions and report errors when writing footprint library tables.
* Fix Boost build CMakeFile to fix bug when bootstrapping a Boost build in
MSys.
* Add code to CvPcb to handle assigning component footprints from the
footprint library table instead of the search path method.
* Add code to CvPcb to allow editing of the footprint library table.
* CvPcb footprint and component panes display fully qualified FPID names.
* Make CvPcb library pane display footprint library table nicknames instead
of library file names.
* Add code to FP_LIB_TABLE object to test the paths in the table against the
list of libraries loaded from the project file.
* Add code to FP_LIB_TABLE to convert assigned footprints in a NETLIST from
legacy format to footprint library table format.
* Split out COMPONENT_NET, COMPONENT, and NETLIST objects from netlist_reader
files and create new pcb_netlist files.
* Fix minor wxListView scroll bar sizing issues.
* Add new token and code to save and load FPID nickname in board file.
* Add new token and code to save and load FPID nickname in s-expression net
list file.
* Add WX_STRING_REPORT object to dump strings to a wxString object.
* Use FPID instead of wxString in MODULE object.
* Use FPID instead of wxString when loading and saving files.
* Use FPID in COMPONENT object.
* Add wxString helper functions and comparison operators to FPID.
* Add fp_lib token to pcb and netlist file formats.
* Add code to load and save FPIDs to pcb file format.
* Fix segfault when deleting invalid footprint library tables in Pcbnew
in non footprint library table build.
* Fix bug when counting the number of mod files in
EDA_APP::SetFootprintLibTablePath();
* Remove defined CMAKE_INSTALL_PREFIX for Windows from main CMakeList.txt.
* Move footprint library path detection code from pcbnew.cpp to EDA_APP
object.
* Add CMAKE_INSTALL_PREFIX to config.h.cmake.
* Simplify and fix search path list code.
* Add CMAKE_INSTALL_PREFIX to the list of search paths in case KiCad was
installed using `make install`.
* Add default global footprint library table to CMake install.
* Add method to set footprint library table to PCB_BASE_FRAME object.
* Remove unused function EDA_APP::GetLibraryFile().
* Minor FP_LIB_TABLE object improvements.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Fixed status bar update bug that caused the selected footprint information
to be overwritten.
* Remove unnecessary SetFocus() calls in list control OnChar() handlers.
* Change filtering from single selection to logically and each filter type.
* Remove clear filtering button and logic.
* Filter buttons now behave as true toggle buttons.
* Improve list control pane focus following when using arrow keys to change
list pane.
* Remove unused parameters from list box constructors.
* Make tab key behave like right arrow key when moving focus to next list
pane.
* Make list pane focus wrap around to next or previous control.
* Simplify component list filtering code.
* Improve status bar updating.
* Tell Bazaar to ignore .downloads-by-cmake instead of downloads-by-cmake.
* Add third list control with library names.
* Add button to toolbar to select filter by library name.
* Add bitmap for filter by library name toolbar button.
* Remove custom UI colors from list controls.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO::
ReadFootprintFiles() which I created in bug fix lp:593989.
* Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD
environment variable is defined as an empty string.
* Add error dialog when libraries cannot be found in system search path
when loading footprint using the select footprint dialog.
* Add footprint library name column to the EDA_LIST_DIALOG when selecting
footprints from the list.
* Allow reading all columns from the selected row in EDA_LIST_DIALOG.
* Remove redundant sort from EDA_LIST_DIALOG constructor
* Add library name member variable and accessors to FOOTPRINT_INFO.
* Make headers translatable for Eeschema select component from list dialog.
* Add some helper methods to FPID for identifying the FPID type and validity.
* Remove a bunch of trailing whitespace and add missing license comments.
Adds "kicad_pcb" to the list of file-extensions for PCBnew in its Info.plist
to make Launch Services recognize the file associations.
Change 8 bit string to UTF8 so fancy mew in "um" can be shown.
* All items shapes are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
This seems to me like the defacto standard for this menu command.
* Added a default filename for save as. Currently it's set to
"Unnamed file" using _() so its translatable.
* Changed the save dialog in PCBnew to use the path of the "original"
file as a base for the new file.
* Fix both legacy and s-expression netlist readers when footprints are
assigned in the netlist.
* Add some helper functions to NETLIST for detecting when footprints are set
or not set and when they have been changed while loading the .cmp file.
* Rename a few functions to improve their readability.
* Tweak the NETLIST_READER code to allow for component footprint names that
are not found in any library to generate a warning instead of an error and
update the board accordingly.
* Don't display undo warning in netlist dialog when dry run option selected.
* Rename netlist_reader_common.cpp to netlist_reader.cpp
* Rename netlist_reader_firstformat.cpp to legacy_netlist_reader.cpp
* Rename netlist_reader_kicad.cpp to kicad_netlist_reader.cpp
* Remove cvpcb/read_write_cmpfile.cpp and move the single function it
contained into cvframe.cpp
* Remove cvpcb/loadcmp.cpp and move the single function it contained into
class_DisplayFootprintsFrame.cpp.
* Remove cvpcb/readschematicnetlist.cpp and move the single function it
contained into cvframe.cpp.
* Remove cvpcb/setvisu.cpp and move the few functions it contained into
the appropriate source file.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
New classes:
- VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.)
- VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes).
- EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL).
- GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries.
- WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc.
- PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods.
- STROKE_FONT - Implements stroke font drawing using GAL methods.
Most important changes to Kicad original code:
* EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects.
* EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime.
* There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew)
* Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom.
* Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime.
* Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods.
* Removed tools/class_painter.h, as now it is extended and included in source code.
Build changes:
* GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL.
* When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required.
* GAL-related code is compiled into a static library (common/libgal).
* Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad
Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS).
More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
the crosshair after zooming.
This method is only used when the ALT key is held while using the mousewheel or
if it's permanently enabled in the options dialog next to the middle mouse
button panning option.
Pcbnew: in netlist dialog: The user now can choose between the netlist and the .cmp file to import footprints names.
Therfore no need to delete the .cmp file when exists to use only the netlist.
This is useful for users who use CvPcb only once to fill footprints fields in schematic, and after edit/modify the footprints fields in schematic outside CvPcb.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
their type, by using the more abstract PLUGIN::Footprint*() functions.
This is an intermediate phase only, other changes will be necessary as library table support comes in.
Encapsulate usage of library path searching, since that will go away as library table support comes in.
Add FOOTPRINT_EDIT_FRAME::{get,set}LibPath() and FOOTPRINT_EDIT_FRAME::{get,set}LibNickName() functions
to provide this encapsulation.
fix a compil warning.
CvPcb: fix regressions :
Shows now a void field instead of the dummy footprint name $nonane (whenthere is no footprint selected in netlist).
The active footprint selection changes only if a new component is selected from the component file,
and does not change just when the next component is automatically selected, after a footprint selection.
Speed up delete association and auto associe.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
Lorenzo Marcantonio
jean-pierre charras
Dick Hollenbeck
Maciej Suminski
Wayne Stambaugh
Marco Serantoni
Fabrizio Tappero
Brian Sidebotham
Michal Jahelka
Felix Morgner
Emmeran
Alexander Lunef
marco.
Jerry Jacobs
Joe Ferner