kicad/Documentation/development/testing.md

Testing KiCad

[TOC]

Unit tests

KiCad has a limited number of unit tests, which can be used to check that certain functionality works.

Tests are registered using CTest, part of CMake. CTest gathers all the disparate test programs and runs them. Most C++ unit tests are written using the Boost Unit Test framework, but this is not required to add a test to the testing suite.

The test CMake targets generally start with qa_, the names of the tests within CTest are the same but without the qa_ prefix.

Running tests

You can run all tests after building with make test or ctest. The latter option allows many CTest options which can be useful, especially in automated or CI environments.

Running specific tests

To run a specific test executable, you can just run with ctest or run the executable directly. Running directly is often the simplest way when working on a specific test and you want access to the test executable's arguments. For example:

# run the libcommon tests
cd /path/to/kicad/build
qa/common/qa_common [parameters]

For Boost unit tests, you can see the options for the test with <test> --help. Common useful patterns:

• <test> -t "Utf8/*" runs all tests in the Utf8 test suite.
• <test> -t "Utf8/UniIterNull" runs only a single test in a specific suite.
• <test> -l all adds more verbose debugging to the output.
• <test> --list_content lists the test suites and test cases within the test program. You can use these for arguments to -l.

You can rebuild just a specific test with CMake to avoid rebuilding everything when working on a small area, e.g. make qa_common.

Writing Boost tests

Boost unit tests are straightforward to write. Individual test cases can be registered with:

BOOST_AUTO_TEST_CASE( SomeTest )
{
    BOOST_CHECK_EQUAL( 1, 1 );
}

There is a range of functions like BOOST_CHECK, which are documented here. Using the most specific function is preferred, as that allows Boost to provide more detailed failures: BOOST_CHECK( foo == bar ) only reports a mismatch, BOOST_CHECK_EQUAL( foo, bar ) will show the values of each.

To output debug messages, you can use BOOST_TEST_MESSAGE in the unit tests, which will be visible only if you set the -l parameter to message or higher. This colours the text differently to make it stand out from other testing messages and standard output.

You can also use std::cout, printf, wxLogDebug and so on for debug messages inside tested functions (i.e. where you don't have access to the Boost unit test headers). These will always be printed, so take care to remove them before committing, or they'll show up when KiCad runs normally!

Expected failures

Sometimes, it is helpful to check in tests that do not pass. However, it is bad practise to intentionally check in commits that break builds (which is what happens if you cause make test to fail).

Boost provides a method of declaring that some specific tests are allowed to fail. This syntax is not consistently available in all supported Boost versions, so you should use the following construct:

#include <unit_test_utils/unit_test_utils.h>

// On platforms with older boosts, the test will be excluded entirely
#ifdef HAVE_EXPECTED_FAILURES

// Declare a test case with 1 "allowed" failure (out of 2, in this case)
BOOST_AUTO_TEST_CASE( SomeTest, *boost::unit_test::expected_failures( 1 ) )
{
    BOOST_CHECK_EQUAL( 1, 1 );

    // This check fails, but does not cause a test suite failure
    BOOST_CHECK_EQUAL( 1, 2 );

    // Further failures *would* be a test suit failure
}

#endif

When run, this produces output somewhat like this:

qa/common/test_mytest.cpp(123): error: in "MyTests/SomeTest": check 1 == 2 has failed [1 != 2
*** No errors detected

And the unit test executable returns 0 (success).

Checking in a failing test is a strictly temporary situation, used to illustrate the triggering of a bug prior to fixing it. This is advantageous, not only from a "project history" perspective, but also to ensure that the test you write to catch the bug in question does, in fact, catch the bug in the first place.

Python modules

The Pcbnew Python modules have some test programs in the qa directory. You must have the KICAD_SCRIPTING_MODULES option on in CMake to build the modules and enable this target.

The main test script is qa/test.py and the test units are in qa/testcases. All the test units can by run using ctest python, which runs test.py.

You can also run an individual case manually, by making sure the modules are built, adding them to PYTHONPATH and running the test from the source tree:

make pcbnew_python_module
export PYTHONPATH=/path/to/kicad/build/pcbnew
cd /path/to/kicad/source/qa
python2 testcase/test_001_pcb_load.py

Diagnosing segfaults

Although the module is Python, it links against a C++ library (the same one used by KiCad Pcbnew), so it can segfault if the library has a defect.

You can run the tests in GDB to trace this:

$ gdb

(gdb) file python2
(gdb) run testcases/test_001_pcb_load.py

If the test segfaults, you will get a familiar backtrace, just like if you were running pcbnew under GDB.

Fuzz testing

It is possible to run fuzz testing on some parts of KiCad. To do this for a generic function, you need to be able to pass some kind of input from the fuzz testing tool to the function under test.

For example, to use the AFL fuzzing tool, you will need:

• A test executable that can:
  • Receive input from stdin to be run by afl-fuzz.
  • Optional: process input from a filename to allow afl-tmin to minimise the input files.
• To compile this executable with an AFL compiler, to enable the instrumentation that allows the fuzzer to detect the fuzzing state.

For example, the qa_pcb_parse_input executable can be compiled like this:

mkdir build
cd build
cmake -DCMAKE_CXX_COMPILER=/usr/bin/afl-clang-fast++ -DCMAKE_C_COMPILER=/usr/bin/afl-clang-fast ../kicad_src
make qa_pcb_parse_input

You may need to disable core dumps and CPU frequency scaling on your system (AFL will warn you if you should do this). For example, as root:

# echo core >/proc/sys/kernel/core_pattern
# echo performance | tee cpu*/cpufreq/scaling_governor

To fuzz:

afl-fuzz -i fuzzin -o fuzzout -m500 qa/pcb_parse_input/qa_pcb_parse_input

where:

• -i is a directory of files to use as fuzz input "seeds"
• -o is a directory to write the results (including inputs that provoke crashes or hangs)
• -t is the maximum time that a run is allowed to take before being declared a "hang"
• -m is the memory allowed to use (this often needs to be bumped, as KiCad code tends to use a lot of memory to initialise)

The AFL TUI will then display the fuzzing progress, and you can use the hang- or crash-provoking inputs to debug code as needed.

Run-time debugging

KiCad can be debugged at run-time, either under a full debugger such as GDB, or using simple methods like logging debug to the console.

Printing debug

If you are compiling KiCad yourself, you can simply add debugging statements to relevant places in the code, for example:

wxLogDebug( "Value of variable: %d", my_int );

This produces debug output that can only be seen when compiling in Debug mode.

You can also use std::cout and printf.

Ensure you do not leave this kind of debugging in place when submitting code.

Printing trace

Some parts of the code have "trace" that can be enabled selectively according to a "mask", for example:

wxLogTrace( "TRACEMASK", "My trace, value: %d", my_int );

This will not be printed by default. To show it, set the WXTRACE environment variable when you run KiCad to include the masks you wish to enable:

$ WXTRACE="TRACEMASK,OTHERMASK" kicad

When printed, the debug will be prefixed with a timestamp and the trace mask:

11:22:33: Trace: (TRACEMASK) My trace, value: 42

If you add a trace mask, define and document the mask as a variable in include/trace_helpers.h. This will add it to the trace mask documentation.

Some available masks:

• Core KiCad functions:
  • KICAD_KEY_EVENTS
  • KicadScrollSettings
  • KICAD_FIND_ITEM
  • KICAD_FIND_REPLACE
  • KICAD_NGSPICE
  • KICAD_PLUGINLOADER
  • GAL_PROFILE
  • GAL_CACHED_CONTAINER
  • PNS
  • CN
  • SCROLL_ZOOM - for the scroll-wheel zooming logic in GAL
• Plugin-specific (including "standard" KiCad formats):
  • 3D_CACHE
  • 3D_SG
  • 3D_RESOLVER
  • 3D_PLUGIN_MANAGER
  • KI_TRACE_CCAMERA
  • PLUGIN_IDF
  • PLUGIN_VRML
  • KICAD_SCH_LEGACY_PLUGIN
  • KICAD_GEDA_PLUGIN
  • KICAD_PCB_PLUGIN

Advanced configuration

There are some advance configuration options, which are mostly used for development or testing purposes.

To set these options, you can create the file kicad_advanced and set the keys as desired (the advanced config documentation for a current list. You should never need to set these keys for normal usage - if you do, that's a bug.