Prior to this commit, the virtualbox synced folder option
`SharedFoldersEnableSymlinksCreate` was always enabled. This commit
introduces a config option and an environment variable which allows
users to configure the option globally or per synced_folder in their
Vagrantfile.
Prior to this commit, when the `--global` flag was used with the
`vagrant box outdated` command, it would ignore box providers and not
inform the user of all outdated boxes. This commit fixes that by
displaying each box within the users environment, and includes the
provider of the box in the message.
As of `net-ssh` version 4.2.0, the key :paranoid has been deprecated in
favor of using :verify_host_key. This commit updates Vagrants ssh config
to use the new key, and deprecates the use of :paranoid.
+ This disambuguates calls to the Hyper-V functions for the Hyper-V provider.
The ambiguity of some commands - such as `Get-VM` - causes the Hyper-V provider
to fail on systems where VMware PowerCLI is installed. This change ensures that
all calls to Hyper-V specific cmdlets or functions are prepended by `Hyper-V\`.
This ensures the correct cmdlet calls are being made.
+ Resolves #8862.
Provides simple nfs service name detection via systemd or sys-v. Defaults
are provided if no match is found. Service name is defined via method
allowing derivative guests to only need to provide an updated name.
This fixes an issue when the interface being configured is the
interface through which ssh traffic is forwarded.
In a complex scenario, one needs to disable the default interface for
NAT, and use other interface for ssh. In this case, when vagrant run
`ifconfig #{ifname} inet delete`, the second ifconfig that is supposed
to restore interface settings will never be called. This might be a rare
need, but it is also strongly recommended to use `netstart` when
reconfiguring interfaces after updating `hostname.if(5)`.
The issue can be triggered when ssh connection has issues between two
`ifconfig` commands.
This bug (invalid method call) hasn't been caught by unit tests because
Vagrant::Plugin::V2::Config catches all invalid/bad configuration calls
and save them for generating error messages during the "validate" stage.
This way, the `ask_sudo_pass=(value)` method was not interrupted and the
`@ask_become_pass` attribute was (surprisingly) correctly set (allowing
the related unit tests to pass).
In order to avoid similar problem to happen again, the deprecation
message output is now fully verified.
This commit ensures that we actually break when the download was
successful. Before it tried to download again for every iteration of the
loop. In addition the number of iterations have been increased. I've
experienced timeouts on third retry. Increasing to 5.
This commit adds better messaging to the user if the parallel flag is
used without the force flag. It also makes the state checking based on
the delta between the initial and final states of the guests due to the
fact that there is no guarantee what the "destroyed" state id will be
between providers.
On Debian installations, wget is installed even into the most minimal
environment. Even Python support on Debian cannot be guaranteed if
Standard System Utilities was not selected at installation time (or if
debootstrap was used), which is why the retrieved bootstrap-salt.sh
script takes care of installing it prior to installing Salt.
This commit requires the winssh communicator class wihtin the public_key
capability for Windows. Prior to this commit users could run into a
situation where Vagrant would check if the machine could speak in WinSSH
and fail on an uninitialized constant.
This commit removes some duplicated code within the Solaris11 guest
implemnentation and instead relies on the Solaris guest for the majority
of its guest capabilities.
It should be valid to allow paths with spaces for the synced folder
guest path but since the guest path is used to generate the ID (if one
isn't provided), this will err out in VirtualBox because it doesn't
allow spaces for the --name argument. We should simply convert ' ' to
'_' as we do with other special characters.
Fixes#8991.
1. When remote executing scripts one should always call powershell with
1a. "-NonInteractive", in order to prevent interactive prompts from leading to an endless waiting time for the script to return
1b. "-NoProfile", in order to prevent the loading of unknown custom profiles before execution of the script which could have unintended side effects
2. During my tests I constantly ran into 408 timeouts when downloading the salt binaries. I've prevented that by adding a simple retry mechanism and an error exit in case of multiple failures. Without this change the bootstrap script never returned (and neither did vagrant up)
Output format of ui.info method (bold text) makes reading long script outputs really heavy on the eyes. ui.detail is a better match for this type of output.
Reverting the changes done in 7d2f7dab97
because they don't work and or update vagrant to invoke running the
vbox cli tool for every single forwarded port instead of forwarding them
all in one command.
Issue: https://github.com/mitchellh/vagrant/issues/8468
A lot of vboxmanage commands are flakey and frequently cause
bringing multiple machines up at once to fail, especially when
the host system is under heavy load. Most commands are also safe
to retry and just result in a no-op, so we can simply add
'retryable' to a lot of existing calls. For the others we need to
do a little bit of cleanup or reevaluate the parameters before
trying again.
- Keep the Programming Errors with corresponding Exception class and
en.yml message template. Fix the alphabetical order in errors.rb by
the way.
- Fix English wording in the documentation and en.yml messages
- Use StandardError for unknown error rescuing.
Thanks @chrisroberts!
Vagrant will verify that the current Ansible version does support the
requested compatibility mode (only applicable if not "auto", of course).
As mentioned in the documentation, there is no sanity checks between
`version` option and `compatibility_mode` option.
With this change, the host-based provisioner is also improved to
execute only once the "ansible" command (and store the gathered
information for multiple usages like version requirement and
compatibility checks). On the other hand, the guest-based provisioner
can still potentially execute "ansible" twice (once in the
AnsibleInstalled cap, and via "gather_ansible_version" function via
Base::set_compatibility_mode).
Before this change, only the ansible_local provisioner supported this
option (for ansible version requirement, and pip installation). Now, the
ansible host-based provisioner can also require a exact ansible version.
Resolve#8914
Note: this has been added as part of #6570 resolution, since the
introduction of the `compatibility_mode` auto-detection made both
provisioners made capable to detect ansible version.
Pending: optimize the code to avoid duplicated executions of "ansible
--version" command.
With this change, it is now possible to get rid of many deprecation
messages successively introduced in Ansible 1.9, and 2.0. More
interesting, the generated inventory will contain the recommended
variable names (e.g. `ansible_host` instead of `ansible_ssh_host`)
when the compatibility mode is set to '2.0'.
Details:
- Add `compatibility_mode` option to control the Ansible parameters
format to be used. The value corresponds to the minimal version
supported. For the moment, possible values are '1.8' (corresponding to
Vagrant's former behaviour) or '2.0'.
Note that a dynamic inventory generated in compatibility mode '2.0'
is not supported by Ansible 1.x. On the other hand, Ansible 2.x so far
supports inventory format generated by the compatibility mode '1.8'.
- Add compatibility mode auto-detection, based on the available Ansible
version. This is the default behaviour in order to bring a maximum of
user friendliness. The drawback of this approach is to let potential
compatibility breaking risks, for `ansible` provisioner setups that
already integrate Ansible 2.x **AND** rely on the existence of
the generated `_ssh` variable names. Thanks to the vagrant warnings
(and its release notes), I argue that it is worth to offer
auto-detection by default, which offers a sweet transition to most
users.
- Add `become`, `become_user` and `ask_become_pass` options and their
backwards compatible aliases. The legacy options are now deprecated.
Note that we intentionally didn't provide a '1.9' compatibility mode,
as it would add extra-complexity for practically no added-value.
To my knowledge, the Ansible 2.x series haven't introduced yet any major
changes or deprecations that would motivate to introduce a higher
version compatibility mode (to be confirmed/verified).
Resolve GH-6570
Still Pending:
- Optimization: Reduce the number of `ansible` command executions.
Currently two exec calls will be performed when the compatibility
mode auto-detection is enabled (i.e. by default). We could make the
provisioner a little bit smarter to only execute `ansible` only once
in any situation (by combining "presence" and "version" checks).
- User-friendliness: Add better validator on `compatibility_mode`
option, and shows a warning or an error instead of the silent
fallback on the auto-detection modus.
- Test coverage: All the added behaviours are not fully covered yet.
Prior to this commit, if you set up multiple folders to export with NFS
on linux with the exact same hostpath, the template used to write
/etc/exports would end up placing the same path with the same IP in
/etc/exports and cause an error preventing the folders from being
properly mounted. This commit fixes that by first looking at which
folders are being exported and if there are any duplicates. If so,
remove the duplicates and only export 1 hostpath folder. If these
duplicate folders have differing nfs linux options, an exception must be
thrown because we cannot assume which options the user intended to
export with.
The patterns "all" is a special keyword that target all hosts in the
inventory. Therefore it makes sense to accept "all:vars" as a group
variable name. Note that "*:vars" pattern is not valid in an Ansible
inventory.
See http://docs.ansible.com/ansible/latest/intro_patterns.html#patternsFix#7730
This commit aligns how the file provisioner should work on all host
machines. It ensures that a `/.` is only applied if the user intended
to upload a folder to a destination under a different name. It ensures
that if uploading to a windows guest with a different destination folder
name, it does not nest the source folder under that name so that it
works the same as it does on linux platforms. It also updates the
behavior of the winrm upload communicator by allowing an array of paths
to be uploaded instead of a single file or folder to allow for this new
functionality for windows guests.
This commit introduces the salt_arg option that allows a user to pass
additional command line flags to the `salt` tool when provisioning with
a master setup.
It also adds additional config validation to ensure that both
`salt_args` and `salt_call_args` is an array.
Prior to this commit, if the ssh-config command was invoked within
cygwin or msys2, it would show a regular windows style path for private
keys rather than a path that could be used within msys2 or cygwin. This
commit updates that behavior by converting all of the private key paths
to the proper msys2 or cygwin path if the platform is windows and the
command was invoked from one of those two shells.
Prior to this commit, when the guest capability attempted to expand a
path with spaces it would quote the path passed in. However if the path
also had a relative path those quotes would end up making `printf`
ignore it and not properly expand the path fully. This commit updates
that to first escape the quotes of a path and then pass in the new path
to be expanded.
Prior to this commit, when using a global id to bring up a vagrant vm,
vagrant would fail during the "install provider" step due to the fact
that the global vagrant machine was not configured for the local vagrant
environment. Since this global vm exists elsewhere, we disable the
install provider step so that vagrant can just bring up the global
vagrant machine.
Prior to this commit, there was no way to add additional ssh arguments
within a Vagrantfile for a given vagrant machine. This commit introduces
a new option extra_args that allows users to pass in a single argument
or an array of flags that will be added onto the ssh command.
Prior to this commit, the `vagrant validate` command would only validate
the first machine in a vagrant file. This commit improves that by
validating all known machines in the environment. If one is not found,
it will properly throw an exception instead of a stacktrace.
Prior to this commit, if a user passed in a script that was frozen,
the shell provisioner would fail to modify the script to replace line
endings for windows because the string was immutable. This commit fixes
that by dup'ing the string so that it can have its line endings replaced
Prior to this commit, if a user set the `destination` path to include a
space, the `shell_expand_guest_path` function would remove that space
and return a partial path. This commit updates that to quote the path to
be expanded to preserve the entire path.
Prior to this commit, if a file provisioner block was ran twice with a
folder on a remote host, due to how scp works, it would first copy over
that folder, and then on the second action it would copy an identical
folder nested within the first one. While this is 'intended' behavior
with scp, it is unexpected behavior for the file provisioner. This
commit updates the file provisioner to first ensure that the directory
to be copied exists on the remote host prior to copying, and then the
destination dir has been changed to the directory that the destination
will be copied to, rather than the exact directly that includes the
folder from the host to prevent the nested folder behavior.
This adds a prompt for a token description, which is now supported in
Vagrant Cloud. Pressing enter on the prompt uses the default description
of `"Vagrant login"`.
$ vagrant login
In a moment we will ask for your username and password to HashiCorp's
Vagrant Cloud. After authenticating, we will store an access token locally on
disk. Your login details will be transmitted over a secure connection, and
are never stored on disk locally.
If you do not have an Vagrant Cloud account, sign up at
https://www.vagrantcloud.com
Vagrant Cloud Username: justincampbell
Password (will be hidden):
Token description (Defaults to "Vagrant login"):
You are now logged in.
$
Which created a token with the default description of "Vagrant login":
Entering a description:
Token description (Defaults to "Vagrant login"): Justin's MacBook Pro
Prior to this commit, if a state was reached where the action_box_add
command needed a force flag, it would fail requesting the user to
provide that flag to override adding a new box. However that flag did
not exist on the box update command, and could not be passed onto the
action_box_add action. This commit updates that to include a force flag,
and if used, pass that value onto the action_box_add action.
Prior to this commit, because of how the bootstrap salt shell file
worked, if github could not be resolved, the installer script would fail
silently with an exit code 0 because `sh` would evalute without any
errors and the curl exit code would be ignored. This commit splits out
the installer to first attempt to save the bash installer, and if it
exists, execute it.
Powershell helper script now returns error when guest IP address
cannot be discovered. When reading addresses from a network
device both IPv4 and IPv6 are stored and the IPv4 address has
precedence on returned address.
When preparing the NFS settings on VirtualBox the guest IP addresses
are pulled from VirtualBox directly and any static addresses are
pulled as well. This can lead to aquiring a host IP and machine IP
but results in a failure of NFS mount because the IPs are not on
the same network. This filters the machine IP result to validate
it is within the host adapter IP range.
Prior to this commit, the puppet provisioner would use the manifest dir
flag when running `puppet apply`. Not only is this flag redundant due to
how puppet apply works, but it is also deprecated in Puppet 4 and
removed in Puppet 5. This commit simply removes the flag when invoking
`puppet apply`.
Prior to this commit, rsync-auto would not properly rsync realtive dirs
outside the cwd if defined in the Vagrantfile. This commit updates that
to ensure that the command looks at the Vagrant config to ensure that
folder was intended to be rsync'd to the machine even if outside the
current working dir.
Prior to this commit, when users invoked the `rsync-auto` command using
the docker provider with boot2docker, vagrant would rsync all known
containers using the boot2docker vm rather than the current working dir.
This commit updates that behavior to ensure that only the current
working dirs vagrant machines will be rsynced.
* ALT Linux platforms is an original rpm based distribution
forked as Mandrake Russian Edition Spring at 2001 year
* Distributions of ALT Linux use etcnet (https://www.altlinux.org/Etcnet) as
internal network configuration system needs for configure_networks support
Prior to this commit, if a user attempted to configure
`/etc/default/docker` through vagrant prior to installation, the package
manager would not override an existing configuration and installing
docker would then fail. This commit fixes this by introducing a
`post_install_provisioner` that allows users to define a provisioner
block that will run after docker has been installed, allowing users to
configure `/etc/default/docker` how they want.
This commit adds a variety of fixes for SmartOS guest support:
- Host name setting now works in the global zone and in non-global zones
- NFS now works in the global zone and the non-global zone.
- Tests are updated and moved to the (apparently) more modern style
This commit allows the user to configure two additional options that
were previously not configurable: Compression and DSAAuthentication.
Each config option is set as a boolean, and if left out of the config
will default to its previous behavior which is included and set to
"yes". If the user explicitly sets it to false, it will not be included
as an ssh option.
While neither the FreeBSD provisioner nor the SUSE provisioner support
installing Ansible using pip their ansible_install methods still get
called with that fourth argument. The result being these errors when
Vagrant tries to install Ansible.
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/freebsd/ansible_install.rb:10:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
/opt/vagrant/embedded/gems/gems/vagrant-1.9.5/plugins/provisioners/ansible/cap/guest/suse/ansible_install.rb:9:in `ansible_install': wrong number of arguments (4 for 3) (ArgumentError)
The Arch provider, it too without pip support, already catches the
pip_args argument this way.
Prior to this commit, Vagrant had no way internally to determine if a
provisioner object was unique if the `name` property was not set.
Because of this, when vagrant went to merge configs it would duplicate
an existing unnamed provisioner since it had no way of determining if a
user actually had added the same provisioner twice. This commit fixes
that by introducing an id which will default to `name` if its set, but
if not will be set by `SecureRandom.uuid`.
Prior to this commit, the ssh communicator would use the default cipher
list in Net::SSH to negociate which ciphers it should use between hosts.
Due to a bug in Net::SSH and the position of the `none` cipher in its
default cipher list, if a host supported the none cipher, but also
only supported other ciphers that came after none in the default list,
it would accept none and attempt to use that cipher instead of the other
supported ciphers. This commit fixes that behavior by copying the
default cipher list from Net::SSH and placing none last in the list so
that other ciphers can be used in the negotiation before attempting to
use the unsecure none cipher.
This commit adds some better handling around the snapshot restore and
delete commands for the virtualbox provider. If a user attempts to restore from
a vm that does not exist, instead of exiting 0 it will raise an
exception saying the virtual machine has not been created yet.
Addtionally, if a user attempts to restore from a snapshot id that does
not exist, instead of printing a complicated exception from the
virtualbox cli tool, it prints a more useful error message telling the
user that the snapshot does not exist.
Prior to this commit, if a user ran the `vagrant ssh -c CMD` command, it
would not allow the user to configure pseudo-terminal allocation. This
commit introduces a -t flag for the `vagrant ssh` command which defaults
to true if not specified.
This commit adds/changes the following for SmartOS guests:
- modifies the "Halt" capability to use /usr/sbin/poweroff in preference
to /usr/sbin/shutdown with parameters, and modifies the associated
test.
- adds an "InsertPublicKey" capability and tests.
- adds a "RemovePublicKey" capability and tests.
With this commit applied, the vast majority of typical Vagrant workflow
is available to SmartOS global zone guests (provided NFS mounts are used
rather than VMWare shared folders).
Prior to this commit, if a user attempted to use the `vagrant snapshot
save` or `vagrant snapshot list` commands on a vm whose provider did not
support snapshots, it would simply print a warning. This commit changes
that behavior by instead raising an error.
Prior to this commit, the vagrant snapshot plugin would save snapshots
with existing names which lead to duplicate snapshot names being saved.
This commit fixes that by checking to see if the given snapshot name
already exists and if so, fails telling the user the given snapshot name
already exists. If a user passes a --force flag, vagrant will first
delete the existing snapshot, and take a new one with the given name.
Before the patch this error will happen if the original directory already exists
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
The following SSH command responded with a non-zero exit status.
Vagrant assumes that this means the command failed!
mkdir '/cygdrive/c/inetpub/wwwroot'
Stdout from the command:
Stderr from the command:
mkdir: cannot create directory ‘/cygdrive/c/inetpub/wwwroot’: File exists
-------------------------------------------------------------------------------------------------
After the patch, this is result
-------------------------------------------------------------------------------------------------
==> windows: Rsyncing folder: /vhosts/oxfamshop.com.au/ => /cygdrive/c/inetpub/wwwroot
==> windows: - Exclude: [".vagrant/", ".git/", "target/", "node_modules/"]
==> windows: Showing rsync output...
==> windows: rsync[stdout] -> sending incremental file list
==> windows: rsync[stdout] ->
==> windows: rsync[stdout] -> sent 500855 bytes received 6635 bytes 78075.38 bytes/sec
==> windows: rsync[stdout] -> total size is 175357552 speedup is 345.54
-------------------------------------------------------------------------------------------------
Enables proper setup of VMs started from within WSL rootfs paths. Updates
setup for Windows access when working within the WSL to auto-detect settings
instead of relying on user defined environment variables.
This makes the behavior of the docker and hyperv provider consistent with the
virtualbox provider by raising an error on ssh actions if the machine is not
created or not running.
Fixes#8508
Reduce the total number of commands run to configure interfaces. If
a service reload/restart is required, only execute it once instead
of once per device. When nm is managing a device, the explicit up
is not required.
Properly detects NetworkManager on guest as well as devices controlled
by NetworkManager. Provides configuration option to enable/disbale
NetworkManager control on devices.
Fix the error
```homestead-7: Creating and registering the VM...
An error occurred while executing a PowerShell script. This error
is shown below. Please read the error message and see if this is
a configuration error with your system. If it is not, then please
report a bug.
Script: import_vm_vmcx.ps1
Error:
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:18 char:37
+ [string]$differencing_disk=$null
+ ~
Missing ')' in function parameter list.
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:20 char:1
+ )
+ ~
Unexpected token ')' in expression or statement.
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : MissingEndParenthesisInFunctionParameterList
```
In some cases the SSH connection may be aborted while waiting
for setup. This includes aborted connections in the list of
applicable exceptions to retry on while waiting for the connection
to become available.
Fixes#8520
Prevent sending empty data strings to defined blocks handling
stderr and stdout output. These can occur when the garbage
marker is identified and collected data pruned, but no remaining
data is left to send.
Fixes#8259
With the introduction of `pip_args` option, you can easily extend the
`:pip` installation mode behaviour. But some interesting/advanced usages
are still not possible because of the auto-generated parts ("ansible"
package, version selection, and the `--upgrade` flag).
By adding this "pip_args_only" install mode, it will be for instance
possible to:
- install unofficial releases, like release candidates published at
https://releases.ansible.com/
- install more pip packages (e.g. via a `requirements.txt` file), with
hash validation, etc.
Note that there is no config validation that requires `pip_args` option
to be defined when the :pip_args_only mode is selected. This would be
more elegant, and user friendly to raise a configuration error, but this
can wait. At least, running with an empty `pip_args` won't lead to any
command crash, since the rather dummy "pip install" shows an helper
notice and terminates with a zero (0) exit code.
This change is thought as a complement to the changes originally
proposed in pull request GH-8170.
With this new option, it is now possible to pass additional arguments to
pip command when the `install_mode` is "pip".
(@gildegoma reworded the original commit message of pull request GH-8170)
Issue #8159
while using:
$ vagrant package --base ${VIRTUALBOXNAME}
this error occurs:
/usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:59:in `package_base': uninitialized constant VagrantPlugins::CommandPackage::Command::SecureRandom (NameError)
Did you mean? SecureRandom
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/plugins/commands/package/command.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/cli.rb:42:in `execute'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/lib/vagrant/environment.rb:274:in `cli'
from /usr/share/rubygems-integration/all/gems/vagrant-1.9.0/bin/vagrant:118:in `<top (required)>'
from /usr/bin/vagrant:22:in `load'
from /usr/bin/vagrant:22:in `<main>'
`/etc/init.d/network restart` already restart NM and shutdown interfaces.
In start() :
```
if [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]; then
nmcli connection reload
fi
```
In stop() :
```
for i in $vpninterfaces $xdslinterfaces $bridgeinterfaces $vlaninterfaces $remaining; do
unset DEVICE TYPE
(. ./ifcfg-$i
if [ -z "$DEVICE" ] ; then DEVICE="$i"; fi
if ! check_device_down $DEVICE; then
action $"Shutting down interface $i: " ./ifdown $i boot
[ $? -ne 0 ] && rc=1
fi
)
done
```
Where $remaining include all "others" interfaces including eth*
This reverts commit 166d10d4e1.
RHEL-7 / Current Fedora versions tend to use NetworkManager for
configuring the networks, and `service network restart` might fail.
If the `NetworkManager` service is running, we should restart it,
otherwise we try restarting `network`.
Allows checksum validation on downloaded files via Util::Downloader
using MD5 and/or SHA1 checksums. This also integrates checksum validation
support with the shell provisioner for downloaded remote files.
Usage: vagrant box prune [options]
Options:
-p, --provider PROVIDER The specific provider type for the boxes to destroy.
-n, --dry-run Only print the boxes that would be removed.
--name NAME The specific box name to check for outdated versions.
-f, --force Destroy without confirmation even when box is in use.
-h, --help Print this help
If a `name` is specified as an option, it will be used as the id instead
of inferring it from the `guestpath`. If `guestpath` is nil, the `name`
needs to be specified so the folder can be mounted with a name.
This also fixes the synced folder code to allow `guestpath` to be nil.
It was allowed in a previous version for the purpose of preventing a
directory from being auto mounted (#936), but seems to have become an
error at some point after that.
An example of modifying the default /vagrant folder so it doesn't
auto-mount anymore:
config.vm.synced_folder ".", nil, name: "/vagrant"
An example of sharing another folder, but not auto-mounting it:
config.vm.synced_folder ".", nil, name: "foobar"
Fixes#6835.
The `pkg_add` command will return `0` when a package requested for
installation is not found. This adds a validation check to ensure
the rsync package is actually installed on the guest.
When configuring network devices force NetworkManager to reload new
configuration files as they appear. This prevents NetworkManager from
attempting to continue managing devices on initial start up.
With this new option defined, the `ansible-galaxy` and
`ansible-playbook` commands generated by the Ansible provisioners will
be executed with the ANSIBLE_CONFIG environment variable set
accordingly.
Resolve GH-7195
This commit also fix the following open issues:
- Implement the pending RSpec examples about path existence checks
performed by the ansible (remote) provisioner.
- In verbose mode, the ansible remote provisioner now correctly displays
the Ansible Galaxy parameters ("role_file" and "roles_path") with
single quotes (which is safer for potential copy-paste usage).
Additional Notes:
- Test coverage for `ansible_local` provisioner is still not
implemented. See GH-6633.
- Test coverage for galaxy from host is not implemented yet (due to
general issue with mocking both command executions, see
https://github.com/mitchellh/vagrant/pull/6529#r45278451
It was failing to create files below the machines\default\hyperv folder, rather it was creating folders named 'hypervSnapshots', 'hypervVirtual Hard Disks', and 'hypervVirtual Machines'. This was causing the files to not be removed when destroying the vm, and an error when subsequently bringing it up again.
/etc/issue is far from being a reliable source for OS detection as it
can be changed by a user without affecting any OS functionality. As
newer Debian systems run systemd by default, check for /etc/os-release
and fallback to lsb_release for older Debian versions. Check #7625 for
a similar issue. Even lsb_release is not manatory, therefore keep the
current code of parsing /etc/issue to avoid regressions.
- Remove `ansible-galaxy` detection, since this command was introduced
in Ansible 1.4.2 (December 2013). Checking for `ansible-playbook`
presence should therefore be enough for any "modern" Ansible setup.
- Look for the command defined by the new `playbook_command` option.
Related to GH-7881 and GH-7536
Note that error messages were not adapted, and only mention
a generic "Ansible Software" when executed commands are failing.
We assume that people using the `playbook_command` option are
advanced users that will know all the components to be considered.
Add failing networking interface list sorting test with example
provided by #7883. Update sorting logic to properly handle different
types and differing array lengths.
Fixes#7883
The ansible-playbook command is currently hardcoded for the ansible and
ansible_local provisioners. This patch adds the config option
playbook_command to allow the user to change the command.
Implemented the differencing disk for vmcx.
This means the disk is now copied by Hyper-V (Powershell) instead of Ruby for new machines.
This does mean EFI Firmware now does work for machines since it is quite a feep copy. Compare-VM will report incompatibilities should they be found.
Changes introduced in #7207 removed the logic to handle the
`minion_id` configuration. This commit addresses that regression
by including the `--id #{@config.minion_id}` flag everywhere that
`--local` is used (as it had done before).
I'm not totally in love with the `get_masterless` abstraction here,
so if someone has a better suggestion I'll happily change it.
Fixes#7454
- Honour `ssh.proxy_command` setting (even when the Docker provider is
used via a proxy host). Silly configurations may lead to silly
behaviors, but let's apply the settings...
- Remove condition on `provider_config.connect_via_ssh`, which is
a provider specific parameter (from vagrant-libvirt provider).
- Add a simple unit test
Changes introduced in 982af05 caused the RDP configuration file to be written
with all settings on one line instead of one setting per line. The Microsoft
Remote Desktop client for OS X rejects these configuration files as being
malformed. This patch restores the configuration to one line per setting and
adds tests to guard against regression.
Fixes#7629.
nfs-server.service seems to load kernel modules it needs itself, while nfsd appears in `/proc/filesystems` only after the kernel module has been loaded, so vagrant fails to detect NFS server until it's started first time after the system has booted. This checks if the NFS service actually exists and hopes that it'll figure the stuff out itself.
`list-unit-files` is utilized rather than `list-units` because systemd seems to not list units that are disabled: https://lists.fedoraproject.org/pipermail/devel/2011-November/159117.html
BSD-based guests do not support VirtualBox shared folders. This is a
common source of confusion in Vagrant. This new error clearly explains
that this is not a bug in Vagrant and provides instructions on how to
disable them.
lsb_release command is included in lsb-release package. Sometimes this is
not installed; ex: Docker official Ubuntu image.
/etc/os-release is included in base-files package,
so this is more reliable than lsb_release.
Use the version of Hyper-V instead of Powershell to determine which
exception is thrown by Get-VM. Also fixing an invalid catch statement,
since Powershell can not use variables to match thrown exceptions in
catch.
This adds a new environmental variable `VAGRANT_BOX_UPDATE_CHECK_DISABLE`,
which instructs Vagrant to not check for box updates when running
regular Vagrant commands. This behaves the same as the existing
`config.vm.box_update_check` configuration option, but can be set
globally. Vagrantfile-supplied options will take precedence.
Fixes GH-7479
The change to this file 10 days ago removed a newline character at the end of each key added to it. This mean that when another key was added, it continued on the same line as the one before and thus wasn't being detected when an ssh connection came in with a key file.
With regards to https://github.com/mitchellh/vagrant/issues/7455 this is an (ugly) fix.
I'm sure someone knows a better command to concat a file and a string and append it to the `authorized_keys` file. But this does fix the problem.
This commit include the following changes:
- systematically set ANSIBLE_ROLES_PATH environment variable when
galaxy_roles_path is defined.
- slightly refactor to introduce the concept of "provisioning working
directory" (possible usage in the future for resolving GH-7195)
- fix a bug in ansible-galaxy execution by the ansible_local provisioner
if the paths contains blank characters.
Fix#7269
These changes have been validated against the following guest systems:
- Debian 7 and 8
- Ubuntu 12.04, 14.04 and 16.04
- Fedora 21 and 23
- CentOS 7
- OracleLinux 7
- Scientific Linux 7
At the moment, the pip setup (via get-pip.py script) is not working for
RHEL6-like systems (CentOS 6.6, OracleLinux 6.5, Scientific Linux 6),
because Python 2.6 has been deprecated and is no longer supported by
Python core team. I consider this limitation with low priority in
Vagrant context.
The `:pip` install_mode is currently not implemented for the following
platforms:
- OpenSUSE
- ArchLinux
- FreeBSD
Known Issue: By using get-pip.py script, any previous pip installation
will be most probably overrided. This could be an issue for Python
developers who would prefer to keep their base box setup untouched. In
future iteration, it could be possible to choose to reinstall/upgrade
pip or not. issue for Python developers who would prefer to keep their
base box setup untouched. In future iteration, it could be possible to
choose to reinstall/upgrade pip or not.
Resolve GH-6654
Resolve GH-7167 as the `version` option is now considered to select the
version of Ansible to be installed.
Currently the code tries to detect if Arch uses systemd via checking
comm= of PID 1. As access to proc filesystem might be restricted due to
hideproc set and systemd is default for all Arch Linux installations
since October 2012, let's just ditch that check.
Previously this was very complicated trying to flip between Ruby and
bash. This commit uses a single bash command that decides between yum
and dnf in the script itself.
This commit refactors the freebsd networking to:
1. Use predictable network naming
2. Properly handle DHCP vs static networks on up and reload [GH-5852]
3. Perform all networking configuration in a single command to prevent
partial configuration.
This updates the guest capabilities to run in as few communicator
commands as possible. Additionally, it fixes a number of issues around
hostname and idempotency.
This patch was tested against:
- puphpet/debian75-x64
- debian/jessie64
- debian/wheezy64
with custom networking, custom hostname, and rsync shared folders.
This commit does a few things:
1. Make the hostname update idempotent with `grep -w`
2. Add the given hostname to `/etc/hosts` as recommended by the docs
3. Add missing tests
This commit updates the procedure for configuring arch networks to occur
in a single command. Previously, each network was configured
independently. If, for some reason, one of the networks destroyed the
SSH connection, the box would be irrecoverable. This commit does not
alleviate that behavior, but attempts to mitigate it by running all
network-related configuration commands in a single communicator (SSH)
session.
The new procedure looks like this:
1. Upload a temp file to /tmp/vagrant-network-id... for each interface
on the guest.
2. Compile a commands array (of bash) to execute after all network
configurations have been uploaded.
3. Concatenate all the commands together in a single communicator
session.
This was tested against `terrywant/archlinux` using the following Vagrantfile:
```ruby
Vagrant.configure(2) do |config|
config.vm.box = "terrywang/archlinux"
config.vm.hostname = "banana-ramama.example.com"
config.vm.network "private_network", type: "dhcp"
config.vm.network "private_network", ip: "33.33.33.10"
config.vm.provision "file", source: "Vagrantfile", destination: "/tmp/vf"
config.vm.provision "shell", inline: "echo hi"
end
```
This commit updates the procedure for changing the hostname on arch
guests to occur in a single command. Previously, setting the hostname
and adding the value of the hostname to the /etc/hosts file was done in
two different uploads. This reduces the cycle to a single upload, making
provisioning a bit faster.
Additionally, this changes the behavior of the /etc/hosts file to:
1. Not remove localhost as an alias of 127.0.0.1
2. Prepend our custom hostname before localhost
The resulting /etc/hosts file will look something like:
127.0.0.1 my-host.example.com my-host
127.0.0.1 localhost.mydomain localhost
Tested against `terrywang/archlinux` using the following Vagrantfile:
```ruby
Vagrant.configure(2) do |config|
config.vm.box = "terrywang/archlinux"
config.vm.hostname = "banana-ramama.example.com"
config.vm.network "private_network", type: "dhcp"
config.vm.network "private_network", ip: "33.33.33.10"
config.vm.provision "file", source: "Vagrantfile", destination: "/tmp/vf"
config.vm.provision "shell", inline: "echo hi"
end
```
With this change, the presence of Ansible configuration files (like
playbook file, inventory path, galaxy role file, etc.) is no longer
performed by the `config` classes, but by the `provisioner` classes
(at the beginning of the provision command).
This change fixes several issues:
- Resolve#6984 as `provision` method are only executed when remote
(ssh) communication with the guest machine is possible.
- Resolve#6763 in a better way than 4e451c6 initially did.
- Improve the general provisioner speed since the `config` checks are
actually triggered by many vagrant actions (e.g. `destroy`,...), and
can also be triggered multiple times during a vagrant run (e.g. on
callback request made by the machine provider).
Unlike the former `config`-based checks, the provision action won't
collect all the invalid options, but only report the first invalid
option found and abort the execution.
Some unit tests were not implemented yet to save my scarce "open source
contribution time" for other important issues, but they should be done
at last via GH-6633.
Vagrant's environment (which includes the known list of boxes and
versions) is established at the start of the Vagrant run. This means
that box downloads which occur during the run are not contained in the
set until the next run. This causes duplicate box downloads to raise an
error in multi-machine Vagrantfiles.
This commit fixes that issue by pre-processing the machines by provider
and version, creating a unique set of boxes to update.
Fixes GH-6042
This adds a new core command, `docker-exec`, which allows the user to
exec into an already-running container.
- Fixes#6566
- Fixes#5193
- Fixes#4904
- Fixes#4057
- Fixes#4179
- Fixes#4903
We know that the vm does not exist if we get VBOX_E_OBJECT_NOT_FOUND.
For any other error, this may well be VirtualBox getting confused and it is probably
worth retrying...
This commit changes the way ports are aggregated in the Docker provider.
Previously ports were aggregated by their "number", but that is not a
truly unique representation. Instead, the protocol is now taken into
account when generating the port map.
Fixes GH-5527
This adds two new SSH configuration options:
- `keys_only`
- `paranoid`
These values were previously hard-coded, but can now be user-specified.
Fixes GH-4275
Changes:
- Add "config" unit tests for `ansible_local` (guest)
- Share some "config" examples between both ansible provisioners
- Move `config_host.rb` specific examples to `config/host.rb`
- Add a requirement to "../helpers" in `config/guest.rb` in order to be
able to run the related unit tests
References:
- This is the first part of GH-6633 resolution
- This change is a handy prerequisite for GH-6570
Not addressed yet:
- FIXME (guest.rb): Some test-double stubs are currently not working as
expected, and the related checks are commented out for the moment
(no idea why, but this is not urgent to be fixed because of GH-7335
rejection. See also GH-6984)
- FIXME (shared.rb): The guest-based config should actually NOT return
an error when the extra_vars file cannot be found, but only display a
a warning (similarly to the changes done for GH-6763, see 4e451c6)
This fixes a fairly large tempfile leak. Vagrant uses a template
renderer to write network configuration files locally to disk. Then,
that temporarily file is uploaded to the remote host and moved into
place. Since Vagrant is such a short-lived process, GC never came along
and cleaned up those tempfiles, resulting in many temporary files being
created through regular Vagrant usage.
The Util::Tempfile class uses a block to ensure the temporary file is
deleted when the block finishes. This API required small tweaks to the
usage, but provides more safety to ensure the files are deleted.
This commit basically grepped the code base for all uses of Dir.mktmpdir
and Tempfile.new/open and ensures the value is unique within the
code base and also prefixed with `vagrant-`.
Previously, most invocations of these commands simply used "vagrant",
thus making them indistinguishable when trying to identify leaks.
Previously, there was no one gesture that would start a VM if it was not
running and run the appropriate provisioners regardless of its original
state. `vagrant up` did nothing if the VM was running, while
`vagrant provision` did nothing if the VM was not running.
Change the semantics of `vagrant up`, via the start actions of the providers,
to go through the provisioning logic even if the VM is already running.
The semantics of `run: "once"` vs `run: "always"` are respected.
Tested with the VirtualBox provider but not the others.
Resolves#4421
This commit separates the scratch and output directory creation from the
main package middleware into its own PackageSetupFolders middleware.
Additionally, the validation that ensures an output file does not exist
is moved into a validation function that can be shared across multiple
methods.
This refactor permits a pre-flight check to ensure box packaging would
be successful before actually stopping the VM.
Fixes GH-7351
Vagrant was not behaving correctly in configurations where there was
a static IP on a VirtualBox `intnet` interface and a DHCP `:hostonly`
interface configured.
Since `machine_ip` attempted to get static addresses `||` dynamic
addresses, it would simply use the static machine address and
continue.
This commit corrects this behaviour by collecting all static and
dynamic addresses into the `machine_ip` array instead of just one or
the other.
The result of this is a correctly generated `/etc/exports` on the
host machine, allowing NFS mounts to work correctly in this type of
environment.
Call it with "--no-pager"
Without it, if the user has a pager (more/less/etc.) configured and
call vagrant up with NFS shares, systemctl would use the pager, and
that would probably require an unnecessary key press from the user.
With this change, the `raw_arguments` and `raw_ssh_args` options are:
- STILL automatically converted as an Array when they are set a String
(no behaviour change)
- rejected if they are not of Array data type otherwise
Additional Notes:
- the 'as_array' tiny helper has been removed since it was no longer
used.
- there is for now no deeper validation (i.e. verifying that the Array
elements are only *String* objects)
With cb80286a4a, the helper function
stringify_ansible_playbook_command was also applied on the
`raw_arguments` content, which is not wanted. Given that users have used
the `raw_arguments` option as a workaround to avoid the bug GH-6726,
this new change ensure that any `--extra-vars` option passed as a raw
argument won't be additonally enquoted by the ansible_local
provisioner.
This change also improves the ansible remote provisioner verbose output,
but has no impact on its behaviour, which was already correct.
Note that this refactoring introduces some code duplications that are not
very elegant (see ansible_playbook_command_for_shell_execution in
host.rb and execute_ansible_playbook_from_host in base.rb). I hope we
can find a better implementation later, but it is good enough for now
since all these parts are covered by corresponding unit tests (the
`ansible_local` stuff being tested via the verbose output of the ansible
remote provisioner).
The rationale here is to make it so existing Vagrantfile
configurations remain unchanged.
While benh57's solution worked for me, I had to add a
".to_yaml" to the VagrantFile line that implemented puppet.facter
and this would mean existing Vagrant configurations that use Puppet
would produce an error if that was not present.
Additionally, without this change, the Vagrant file also needed a
"require('yaml')" declaration to make the ".to_yaml" conversion
possible.
When updating the inventory, write to a temp file and replace the
original once writing is complete, to allow for an atomic replacement
of the contents.
Ensures that ansible reading an inventory file will get either the old
or new contents, but never the truncated version of the file that
appears should you open it with 'w' mode set to replace the contents.
Solves the 'provided hosts list is empty' error, which is emitted by
ansible should it manage to be reading the inventory file just as it
was truncated, but before the new contents were flushed to disk.
Partially-Fixes: #6526
Ubuntu versions prior to 16.04 always returned a successful exit status,
even if one tried to down an interface that does not exist. This
behavior changed in Ubuntu 16.04 to return an error. This commit
preserves the old behavior.
Fixes GH-7155
Overcomes exception Net::SFTP::StatusException (2, "no such file") when using: "vagrant push" via sftp and a file parent directory does not exist. Function "upload" does not create the directory before uploading a file ('mkdir: true' seems to have no effect as zero directories are created while files are uploaded normally).
Chris Roberts
Chris Roberts
Lachlan Arthur
Brian Cain
Graham Clinch
Bas van der Vlies
winky
eyJhb
Andrew Pennebaker
Michael T Lombardi
Zachary Flower
Gilles Cornu
Tomoyuki Sakurai
Andrew Hardy
Alexander von Gluck IV
Matthias Haag
Justin Campbell
Benjamin Schiborr
Adam Bolte
Vít Ondruch
Bryce Shurts
Jonathan LaBroad
Ben Hines
Erik Lattimore
Björn Brala
Bryce Shurts
Mikhail Bulash
Jehiah Czebotar
Samuel Clark
nico.vanelslande
Chris Roberts
Antonio Terceiro
Dimitrios Kouzis-Loukas
Peter Parkkali
Rui Lopes
Taliesin Sisson
Artem Sidorenko
Eugenio Marzo
Max Khon
Evgeny Sinelnikov
Caleb Marble
James Nugent
Yufan Lou
Richard Gareau
Andreas Olsson
Richard Mayes
Harry Weppner
Tim Aslat
Brian Dwyer
Arjan Weurding
Dafydd Jones
Martin Nowak
BJ Dierkes
Anand Suresh
Mikhail Zholobov
knbnnate
Gökhan Şengün
Simon Detheridge
James Carr
Patrick Lang
Tobias
Hasyimi Bahrudin
Paul Stengel
Satoshi Matsumoto
Raymond P. Burkholder
Michaël Faille
Matt Wrock
Alvaro Miranda Aguilera
ephemeralsnow
Latchezar Tzvetkoff
jklippel
Jonathan A. Sternberg
Aurelien Pupier
Aron Griffis
Azul
Brian Retford
Jake Ballard
Reto Gantenbein
Daniel Gonzalez
Mark Peek
guessi
Theron Boerner
David Wittman
Rutger Swarts
Dmitry Vasilets
Rudinei Goi Roecker
AJ
Zack Train
Charlie Sharpsteen
tfanning
Jose Luis Duran
Seth Vargo
Alexander Kurilo
hendrenj
Colin Shea
Indrek Ardel
Hanno Heinrichs
Yuya.Nishida
Rory Plaire
Jonathan
James Wilson
Eugene Zamriy
Torsten Juergeleit
Renat Zaripov
Bartłomiej Piotrowski
David O'Rourke
Luca Invernizzi
Ray Ruvinskiy
Thom May
Jon Topper
till
Eric Pulvino
Kierran McPherson
penz
Peter Carrero
Michael Sarahan
Darragh Bailey
Phivos Stylianides
