It was failing to create files below the machines\default\hyperv folder, rather it was creating folders named 'hypervSnapshots', 'hypervVirtual Hard Disks', and 'hypervVirtual Machines'. This was causing the files to not be removed when destroying the vm, and an error when subsequently bringing it up again.
/etc/issue is far from being a reliable source for OS detection as it
can be changed by a user without affecting any OS functionality. As
newer Debian systems run systemd by default, check for /etc/os-release
and fallback to lsb_release for older Debian versions. Check #7625 for
a similar issue. Even lsb_release is not manatory, therefore keep the
current code of parsing /etc/issue to avoid regressions.
- Remove `ansible-galaxy` detection, since this command was introduced
in Ansible 1.4.2 (December 2013). Checking for `ansible-playbook`
presence should therefore be enough for any "modern" Ansible setup.
- Look for the command defined by the new `playbook_command` option.
Related to GH-7881 and GH-7536
Note that error messages were not adapted, and only mention
a generic "Ansible Software" when executed commands are failing.
We assume that people using the `playbook_command` option are
advanced users that will know all the components to be considered.
Add failing networking interface list sorting test with example
provided by #7883. Update sorting logic to properly handle different
types and differing array lengths.
Fixes#7883
The ansible-playbook command is currently hardcoded for the ansible and
ansible_local provisioners. This patch adds the config option
playbook_command to allow the user to change the command.
Implemented the differencing disk for vmcx.
This means the disk is now copied by Hyper-V (Powershell) instead of Ruby for new machines.
This does mean EFI Firmware now does work for machines since it is quite a feep copy. Compare-VM will report incompatibilities should they be found.
Changes introduced in #7207 removed the logic to handle the
`minion_id` configuration. This commit addresses that regression
by including the `--id #{@config.minion_id}` flag everywhere that
`--local` is used (as it had done before).
I'm not totally in love with the `get_masterless` abstraction here,
so if someone has a better suggestion I'll happily change it.
Fixes#7454
- Honour `ssh.proxy_command` setting (even when the Docker provider is
used via a proxy host). Silly configurations may lead to silly
behaviors, but let's apply the settings...
- Remove condition on `provider_config.connect_via_ssh`, which is
a provider specific parameter (from vagrant-libvirt provider).
- Add a simple unit test
Changes introduced in 982af05 caused the RDP configuration file to be written
with all settings on one line instead of one setting per line. The Microsoft
Remote Desktop client for OS X rejects these configuration files as being
malformed. This patch restores the configuration to one line per setting and
adds tests to guard against regression.
Fixes#7629.
nfs-server.service seems to load kernel modules it needs itself, while nfsd appears in `/proc/filesystems` only after the kernel module has been loaded, so vagrant fails to detect NFS server until it's started first time after the system has booted. This checks if the NFS service actually exists and hopes that it'll figure the stuff out itself.
`list-unit-files` is utilized rather than `list-units` because systemd seems to not list units that are disabled: https://lists.fedoraproject.org/pipermail/devel/2011-November/159117.html
BSD-based guests do not support VirtualBox shared folders. This is a
common source of confusion in Vagrant. This new error clearly explains
that this is not a bug in Vagrant and provides instructions on how to
disable them.
lsb_release command is included in lsb-release package. Sometimes this is
not installed; ex: Docker official Ubuntu image.
/etc/os-release is included in base-files package,
so this is more reliable than lsb_release.
Use the version of Hyper-V instead of Powershell to determine which
exception is thrown by Get-VM. Also fixing an invalid catch statement,
since Powershell can not use variables to match thrown exceptions in
catch.
This adds a new environmental variable `VAGRANT_BOX_UPDATE_CHECK_DISABLE`,
which instructs Vagrant to not check for box updates when running
regular Vagrant commands. This behaves the same as the existing
`config.vm.box_update_check` configuration option, but can be set
globally. Vagrantfile-supplied options will take precedence.
Fixes GH-7479
The change to this file 10 days ago removed a newline character at the end of each key added to it. This mean that when another key was added, it continued on the same line as the one before and thus wasn't being detected when an ssh connection came in with a key file.
With regards to https://github.com/mitchellh/vagrant/issues/7455 this is an (ugly) fix.
I'm sure someone knows a better command to concat a file and a string and append it to the `authorized_keys` file. But this does fix the problem.
This commit include the following changes:
- systematically set ANSIBLE_ROLES_PATH environment variable when
galaxy_roles_path is defined.
- slightly refactor to introduce the concept of "provisioning working
directory" (possible usage in the future for resolving GH-7195)
- fix a bug in ansible-galaxy execution by the ansible_local provisioner
if the paths contains blank characters.
Fix#7269
These changes have been validated against the following guest systems:
- Debian 7 and 8
- Ubuntu 12.04, 14.04 and 16.04
- Fedora 21 and 23
- CentOS 7
- OracleLinux 7
- Scientific Linux 7
At the moment, the pip setup (via get-pip.py script) is not working for
RHEL6-like systems (CentOS 6.6, OracleLinux 6.5, Scientific Linux 6),
because Python 2.6 has been deprecated and is no longer supported by
Python core team. I consider this limitation with low priority in
Vagrant context.
The `:pip` install_mode is currently not implemented for the following
platforms:
- OpenSUSE
- ArchLinux
- FreeBSD
Known Issue: By using get-pip.py script, any previous pip installation
will be most probably overrided. This could be an issue for Python
developers who would prefer to keep their base box setup untouched. In
future iteration, it could be possible to choose to reinstall/upgrade
pip or not. issue for Python developers who would prefer to keep their
base box setup untouched. In future iteration, it could be possible to
choose to reinstall/upgrade pip or not.
Resolve GH-6654
Resolve GH-7167 as the `version` option is now considered to select the
version of Ansible to be installed.
Currently the code tries to detect if Arch uses systemd via checking
comm= of PID 1. As access to proc filesystem might be restricted due to
hideproc set and systemd is default for all Arch Linux installations
since October 2012, let's just ditch that check.
Previously this was very complicated trying to flip between Ruby and
bash. This commit uses a single bash command that decides between yum
and dnf in the script itself.
This commit refactors the freebsd networking to:
1. Use predictable network naming
2. Properly handle DHCP vs static networks on up and reload [GH-5852]
3. Perform all networking configuration in a single command to prevent
partial configuration.
This updates the guest capabilities to run in as few communicator
commands as possible. Additionally, it fixes a number of issues around
hostname and idempotency.
This patch was tested against:
- puphpet/debian75-x64
- debian/jessie64
- debian/wheezy64
with custom networking, custom hostname, and rsync shared folders.
This commit does a few things:
1. Make the hostname update idempotent with `grep -w`
2. Add the given hostname to `/etc/hosts` as recommended by the docs
3. Add missing tests
This commit updates the procedure for configuring arch networks to occur
in a single command. Previously, each network was configured
independently. If, for some reason, one of the networks destroyed the
SSH connection, the box would be irrecoverable. This commit does not
alleviate that behavior, but attempts to mitigate it by running all
network-related configuration commands in a single communicator (SSH)
session.
The new procedure looks like this:
1. Upload a temp file to /tmp/vagrant-network-id... for each interface
on the guest.
2. Compile a commands array (of bash) to execute after all network
configurations have been uploaded.
3. Concatenate all the commands together in a single communicator
session.
This was tested against `terrywant/archlinux` using the following Vagrantfile:
```ruby
Vagrant.configure(2) do |config|
config.vm.box = "terrywang/archlinux"
config.vm.hostname = "banana-ramama.example.com"
config.vm.network "private_network", type: "dhcp"
config.vm.network "private_network", ip: "33.33.33.10"
config.vm.provision "file", source: "Vagrantfile", destination: "/tmp/vf"
config.vm.provision "shell", inline: "echo hi"
end
```
This commit updates the procedure for changing the hostname on arch
guests to occur in a single command. Previously, setting the hostname
and adding the value of the hostname to the /etc/hosts file was done in
two different uploads. This reduces the cycle to a single upload, making
provisioning a bit faster.
Additionally, this changes the behavior of the /etc/hosts file to:
1. Not remove localhost as an alias of 127.0.0.1
2. Prepend our custom hostname before localhost
The resulting /etc/hosts file will look something like:
127.0.0.1 my-host.example.com my-host
127.0.0.1 localhost.mydomain localhost
Tested against `terrywang/archlinux` using the following Vagrantfile:
```ruby
Vagrant.configure(2) do |config|
config.vm.box = "terrywang/archlinux"
config.vm.hostname = "banana-ramama.example.com"
config.vm.network "private_network", type: "dhcp"
config.vm.network "private_network", ip: "33.33.33.10"
config.vm.provision "file", source: "Vagrantfile", destination: "/tmp/vf"
config.vm.provision "shell", inline: "echo hi"
end
```
With this change, the presence of Ansible configuration files (like
playbook file, inventory path, galaxy role file, etc.) is no longer
performed by the `config` classes, but by the `provisioner` classes
(at the beginning of the provision command).
This change fixes several issues:
- Resolve#6984 as `provision` method are only executed when remote
(ssh) communication with the guest machine is possible.
- Resolve#6763 in a better way than 4e451c6 initially did.
- Improve the general provisioner speed since the `config` checks are
actually triggered by many vagrant actions (e.g. `destroy`,...), and
can also be triggered multiple times during a vagrant run (e.g. on
callback request made by the machine provider).
Unlike the former `config`-based checks, the provision action won't
collect all the invalid options, but only report the first invalid
option found and abort the execution.
Some unit tests were not implemented yet to save my scarce "open source
contribution time" for other important issues, but they should be done
at last via GH-6633.
Vagrant's environment (which includes the known list of boxes and
versions) is established at the start of the Vagrant run. This means
that box downloads which occur during the run are not contained in the
set until the next run. This causes duplicate box downloads to raise an
error in multi-machine Vagrantfiles.
This commit fixes that issue by pre-processing the machines by provider
and version, creating a unique set of boxes to update.
Fixes GH-6042
This adds a new core command, `docker-exec`, which allows the user to
exec into an already-running container.
- Fixes#6566
- Fixes#5193
- Fixes#4904
- Fixes#4057
- Fixes#4179
- Fixes#4903
We know that the vm does not exist if we get VBOX_E_OBJECT_NOT_FOUND.
For any other error, this may well be VirtualBox getting confused and it is probably
worth retrying...
This commit changes the way ports are aggregated in the Docker provider.
Previously ports were aggregated by their "number", but that is not a
truly unique representation. Instead, the protocol is now taken into
account when generating the port map.
Fixes GH-5527
This adds two new SSH configuration options:
- `keys_only`
- `paranoid`
These values were previously hard-coded, but can now be user-specified.
Fixes GH-4275
Bjorn Brala
Chris Roberts
Brian Retford
Jake Ballard
Chris Roberts
Reto Gantenbein
Gilles Cornu
Daniel Gonzalez
Mark Peek
guessi
Theron Boerner
David Wittman
Matt Wrock
Rutger Swarts
Dmitry Vasilets
Rudinei Goi Roecker
AJ
Zack Train
Charlie Sharpsteen
tfanning
Jose Luis Duran
Seth Vargo
Alexander Kurilo
hendrenj
Colin Shea
Indrek Ardel
Hanno Heinrichs
Yuya.Nishida
Rory Plaire
Satoshi Matsumoto
Jonathan
James Wilson
Eugene Zamriy
Torsten Juergeleit
Renat Zaripov
Bartłomiej Piotrowski
David O'Rourke
nico.vanelslande