Reverting the changes done in 7d2f7dab97
because they don't work and or update vagrant to invoke running the
vbox cli tool for every single forwarded port instead of forwarding them
all in one command.
Issue: https://github.com/mitchellh/vagrant/issues/8468
A lot of vboxmanage commands are flakey and frequently cause
bringing multiple machines up at once to fail, especially when
the host system is under heavy load. Most commands are also safe
to retry and just result in a no-op, so we can simply add
'retryable' to a lot of existing calls. For the others we need to
do a little bit of cleanup or reevaluate the parameters before
trying again.
Powershell helper script now returns error when guest IP address
cannot be discovered. When reading addresses from a network
device both IPv4 and IPv6 are stored and the IPv4 address has
precedence on returned address.
When preparing the NFS settings on VirtualBox the guest IP addresses
are pulled from VirtualBox directly and any static addresses are
pulled as well. This can lead to aquiring a host IP and machine IP
but results in a failure of NFS mount because the IPs are not on
the same network. This filters the machine IP result to validate
it is within the host adapter IP range.
This commit adds some better handling around the snapshot restore and
delete commands for the virtualbox provider. If a user attempts to restore from
a vm that does not exist, instead of exiting 0 it will raise an
exception saying the virtual machine has not been created yet.
Addtionally, if a user attempts to restore from a snapshot id that does
not exist, instead of printing a complicated exception from the
virtualbox cli tool, it prints a more useful error message telling the
user that the snapshot does not exist.
Enables proper setup of VMs started from within WSL rootfs paths. Updates
setup for Windows access when working within the WSL to auto-detect settings
instead of relying on user defined environment variables.
This makes the behavior of the docker and hyperv provider consistent with the
virtualbox provider by raising an error on ssh actions if the machine is not
created or not running.
Fixes#8508
Fix the error
```homestead-7: Creating and registering the VM...
An error occurred while executing a PowerShell script. This error
is shown below. Please read the error message and see if this is
a configuration error with your system. If it is not, then please
report a bug.
Script: import_vm_vmcx.ps1
Error:
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:18 char:37
+ [string]$differencing_disk=$null
+ ~
Missing ')' in function parameter list.
At C:\Program Files
(x86)\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.9.4\plugins\providers\hyper v\scripts\import_vm_vmcx.ps1:20 char:1
+ )
+ ~
Unexpected token ')' in expression or statement.
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : MissingEndParenthesisInFunctionParameterList
```
It was failing to create files below the machines\default\hyperv folder, rather it was creating folders named 'hypervSnapshots', 'hypervVirtual Hard Disks', and 'hypervVirtual Machines'. This was causing the files to not be removed when destroying the vm, and an error when subsequently bringing it up again.
Implemented the differencing disk for vmcx.
This means the disk is now copied by Hyper-V (Powershell) instead of Ruby for new machines.
This does mean EFI Firmware now does work for machines since it is quite a feep copy. Compare-VM will report incompatibilities should they be found.
Use the version of Hyper-V instead of Powershell to determine which
exception is thrown by Get-VM. Also fixing an invalid catch statement,
since Powershell can not use variables to match thrown exceptions in
catch.
This adds a new core command, `docker-exec`, which allows the user to
exec into an already-running container.
- Fixes#6566
- Fixes#5193
- Fixes#4904
- Fixes#4057
- Fixes#4179
- Fixes#4903
We know that the vm does not exist if we get VBOX_E_OBJECT_NOT_FOUND.
For any other error, this may well be VirtualBox getting confused and it is probably
worth retrying...
This commit changes the way ports are aggregated in the Docker provider.
Previously ports were aggregated by their "number", but that is not a
truly unique representation. Instead, the protocol is now taken into
account when generating the port map.
Fixes GH-5527
This commit basically grepped the code base for all uses of Dir.mktmpdir
and Tempfile.new/open and ensures the value is unique within the
code base and also prefixed with `vagrant-`.
Previously, most invocations of these commands simply used "vagrant",
thus making them indistinguishable when trying to identify leaks.
Previously, there was no one gesture that would start a VM if it was not
running and run the appropriate provisioners regardless of its original
state. `vagrant up` did nothing if the VM was running, while
`vagrant provision` did nothing if the VM was not running.
Change the semantics of `vagrant up`, via the start actions of the providers,
to go through the provisioning logic even if the VM is already running.
The semantics of `run: "once"` vs `run: "always"` are respected.
Tested with the VirtualBox provider but not the others.
Resolves#4421
This commit separates the scratch and output directory creation from the
main package middleware into its own PackageSetupFolders middleware.
Additionally, the validation that ensures an output file does not exist
is moved into a validation function that can be shared across multiple
methods.
This refactor permits a pre-flight check to ensure box packaging would
be successful before actually stopping the VM.
Fixes GH-7351
Vagrant was not behaving correctly in configurations where there was
a static IP on a VirtualBox `intnet` interface and a DHCP `:hostonly`
interface configured.
Since `machine_ip` attempted to get static addresses `||` dynamic
addresses, it would simply use the static machine address and
continue.
This commit corrects this behaviour by collecting all static and
dynamic addresses into the `machine_ip` array instead of just one or
the other.
The result of this is a correctly generated `/etc/exports` on the
host machine, allowing NFS mounts to work correctly in this type of
environment.
If the master VM is removed, but the master_id file exists, Vagrant
would still attempt to clone using the master_id rather then
importing re-importing first.
Fixes#6742
Fixed error remains in other versions:
return [] if e.extra_data[:stdout].include?("does not have")
should be
return [] if e.extra_data[:stderr].include?("does not have")
Many methods are the same in different version_X, and should be moved to Base class.
Added support for Port forwarding in an IP aliased environment. The change
makes the following forwarding rule(s) possible.
Ex: eth0 is ip aliased to have a range of IP addresses 10.20.30.0/24.
In the Vagrant file, we can now have an entry like the following and
it will just work! Note the host port 8081 is the same for both .1 and .2.
Vagrant.configure("2") do |config|
config.vm.network "forwarded_port", guest: 80, host: 8080
config.vm.network "forwarded_port", guest: 81, host: 8081, host_ip: 10.20.30.1
config.vm.network "forwarded_port", guest: 82, host: 8081, host_ip: 10.20.30.2
end
Set the IPv6 adapter IP to be <prefix>::1. Otherwise, guest to host
communication over IPv6 is not routed correctly. This means that
consumers should not specify <prefix>::1 IP addresses to VirtualBox,
which should be a reasonable restriction.
Fixes#6658
Vagrant should only consider the host-only interfaces used by the
virtual machine in the IPv6 fixup code. There may be other interfaces
present on the system with IPv6 addresses that for various reasons
would fail the routing check (for example, an interface with no
machines attached).
The patch changes the behavior to not scan all of the host-only
interfaces and adds a unit test for the behavior (that the correct IP
is validated).
Lastly, there is a small fix here that may not be an issue for most
people where the IPv6 prefix was asummed to be a multiple of 16 for
the purposes of constructing the UDP probe datagram. This assumption
has been removed.
Fixes#6586
VirtualBox has a bug where the IPv6 route is lost on every other
configuration of a host-only network. This is also triggered when a VM
is booted.
To fix this, we test the route-ability of all IPv6 networks, and
reconfigure if necessary. This is very fast but we still only do this if
we have any IPv6 networks.
This fixes error for Win 10 Enterprise:
An error occurred while executing a PowerShell script. This error
is shown below. Please read the error message and see if this is
a configuration error with your system. If it is not, then please
report a bug.
Script: get_vm_status.ps1
Error:
C:\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.7.4\plugins\providers\hyperv\scripts\get_vm_status.ps1 : Unable to
find type [Microsoft.HyperV.PowerShell.VirtualizationOperationFailedException].
At line:1 char:1
+ &('C:\HashiCorp\Vagrant\embedded\gems\gems\vagrant-1.7.4\plugins\prov ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (Microsoft.Hyper...FailedException:TypeName) [get_vm_status.ps1], Ru
ntimeException
+ FullyQualifiedErrorId : TypeNotFound,get_vm_status.ps1
Björn Brala
Jehiah Czebotar
Brian Cain
Samuel Clark
nico.vanelslande
Dimitrios Kouzis-Loukas
Chris Roberts
Chris Roberts
Richard Gareau
Richard Mayes
Harry Weppner
Arjan Weurding
Mikhail Zholobov
Patrick Lang
Paul Stengel
Brian Retford
Jake Ballard
Theron Boerner
tfanning
Indrek Ardel
Rory Plaire
Seth Vargo
David O'Rourke
Ray Ruvinskiy
Jon Topper
till
Eric Pulvino
John Julien
Matt Wrock
Marchenko Alexandr
Evgeniy N
Kevin Blair
Pravinchandar Raajendiran
Mitchell Hashimoto
Luke Bakken
Timur Alperovich
Mitchell Hashimoto
Tristan Rivoallan
Markus Perl
caleblloyd
tomfanning
Manuel Pöter
Mike Averto
Adrian Guenter