haskal
/
vagrant
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
vagrant/CHANGELOG.md

2060 lines
99 KiB
Markdown
Raw Blame History

## 1.6.0 (unreleased)
BACKWARDS INCOMPATIBILITIES:
- providers/virtualbox: Shared folders backed by VirtualBox are now
"transient". They will be removed if you reboot outside of Vagrant.
Always use `vagrant reload`.
FEATURES:
- **New guest: Windows**. Vagrant now fully supports Windows as a guest
VM. WinRM can be used for communication (or SSH), and the shell
provisioner, Chef, and Puppet all work with Windows VMs.
- **New command: global-status**. This command shows the state of every
created Vagrant environment on the system for that logged in user.
- **New command: rdp**. This command connects to the running machine
via the Remote Desktop Protocol.
- **New command: version**. This outputs the currently installed version
as well as the latest version of Vagrant available.
- **New provider: Docker**. This provider will back your development
environments with Docker containers. If you're not on Linux, it will
automatically spin up a VM for you on any provider. You can even
specify a specific Vagrantfile to use as the Docker container host.
- Control Vagrant environments from any directory. Using the UUIDs given
in `vagrant global-status`, you can issue commands from anywhere on
your machine, not just that environment's directory. Example:
`vagrant destroy UUID` from anywhere.
- Can now specify a `post_up_message` in your Vagrantfile that is shown
after a `vagrant up`. This is useful for putting some instructions of how
to use the development environment.
- Can configure provisioners to run "once" or "always" (defaults to "once"),
so that subsequent `vagrant up` or `reload` calls will always run a
provisioner. [GH-2421]
- Multi-machine environments can specify an "autostart" option (default
to true). `vagrant up` starts all machines that have enabled autostart.
IMPROVEMENTS:
- core: Vagrant locks machine access to one Vagrant process at a time.
This will protect against two simultaneous `up` actions happening
on the same environment.
- commands/box/remove: Warns if the box appears to be in use by an
environment. Can be forced with `--force`.
- commands/destroy: Exit codes changes. 0 means everything succeeded.
1 means everything was declined. 2 means some were declined. [GH-811]
- commands/destroy: Doesn't require box to exist anymore. [GH-1629]
- commands/init: force flag. [GH-3564]
- commands/rsync-auto: Picks up and syncs provisioner folders if
provisioners are backed by rsync.
- commands/rsync-auto: Detects when new synced folders were added and warns
user they won't be synced until `vagrant reload`.
- commands/ssh-config: Works without a target in multi-machine envs [GH-2844]
- guests/freebsd: Support for virtio interfaces. [GH-3082]
- guests/openbsd: Support for virtio interfaces. [GH-3082]
- provisioners/ansible: Support for Ansible Vault. [GH-3338]
BUG FIXES:
- core: Adding a box from a network share on Windows works again. [GH-3279]
- commands/rsync-auto: Interrupt exits properly. [GH-3552]
- commands/rsync-auto: Run properly on Windows. [GH-3547]
- providers/virtualbox: VirtalBox detection works properly again on
Windows when the `VBOX_INSTALL_PATH` has multiple elements. [GH-3549]
- provisioners/salt: Always copy keys and configs on provision. [GH-3536]
- provisioners/salt: Install args should always be present with bootstrap.
- provisioners/salt: Overwrite keys properly on subsequent provisions [GH-3575]
- synced\_folders/nfs: Acquires a process-level lock so exports don't
collide with Vagrant running in parallel.
- synced\_folders/rsync: Add UserKnownHostsFile option to not complain. [GH-3511]
- synced\_folders/rsync: Proxy command is used properly if set. [GH-3553]
- synced\_folders/rsync: Owner/group settings are respected. [GH-3544]
PLUGIN AUTHOR CHANGES:
- **New host capability:** "rdp\_client". This capability gets the RDP connection
info and must launch the RDP client on the system.
- core: The "Call" middleware now merges the resulting middleware stack
into the current stack, rather than running it as a separate stack.
The result is that ordering is preserved.
- core: The "Message" middleware now takes a "post" option that will
output the message on the return-side of the middleware stack.
- core: Forwarded port collision repair works when Vagrant is run in
parallel with other Vagrant processes. [GH-2966]
- provider: Providers can now specify that boxes are optional. This lets
you use the provider without a `config.vm.box`. Useful for providers like
AWS or Docker.
- provider: A new class-level `usable?` method can be implemented on the
provider implementation. This returns or raises an error when the
provider is not usable (i.e. VirtualBox isn't installed for VirtualBox)
- synced\_folders: New "disable" method for removing synced folders from
a running machine.
## 1.5.4 (April 21, 2014)
IMPROVEMENTS:
- commands/box/list: Doesn't parse Vagrantfile. [GH-3502]
- providers/hyperv: Implement the provision command. [GH-3494]
BUG FIXES:
- core: Allow overriding of the default SSH port. [GH-3474]
- commands/box/remove: Make output nicer. [GH-3470]
- commands/box/update: Show currently installed version. [GH-3467]
- command/rsync-auto: Works properly on Windows.
- guests/coreos: Fix test for Docker daemon running.
- guests/linux: Fix test for Docker provisioner whether Docker is
running.
- guests/linux: Fix regression where rsync owner/group stopped
working. [GH-3485]
- provisioners/docker: Fix issue where we weren't waiting for Docker
to properly start before issuing commands. [GH-3482]
- provisioners/shell: Better validation of master config path, results
in no more stack traces at runtime. [GH-3505]
## 1.5.3 (April 14, 2014)
IMPROVEMENTS:
- core: 1.5 upgrade code gives users a chance to quit. [GH-3212]
- commands/rsync-auto: An initial sync is done before watching folders. [GH-3327]
- commands/rsync-auto: Exit immediately if there are no paths to watch.
[GH-3446]
- provisioners/ansible: custom vars/hosts files can be added in
.vagrant/provisioners/ansible/inventory/ directory [GH-3436]
BUG FIXES:
- core: Randomize some filenames internally to improve the parallelism
of Vagrant. [GH-3386]
- core: Don't error if network problems cause box update check to
fail [GH-3391]
- core: `vagrant` on Windows cmd.exe doesn't always exit with exit
code zero. [GH-3420]
- core: Adding a box from a network share has nice error on Windows. [GH-3279]
- core: Setting an ID on a provisioner now works. [GH-3424]
- core: All synced folder paths containing symlinks are fully
expanded before sharing. [GH-3444]
- core: Windows no longer sees "process not started" errors rarely.
- commands/box/repackage: Works again. [GH-3372]
- commands/box/update: Update should check for updates from latest
version. [GH-3452]
- commands/package: Nice error if includes contain symlinks. [GH-3200]
- commands/rsync-auto: Don't crash if the machine can't be communicated
to. [GH-3419]
- communicators/ssh: Throttle connection attempt warnings if the warnings
are the same. [GH-3442]
- guests/coreos: Docker provisioner works. [GH-3425]
- guests/fedora: Fix hostname setting. [GH-3382]
- guests/fedora: Support predictable network interface names for
public/private networks. [GH-3207]
- guests/linux: Rsync folders have proper group if owner not set. [GH-3223]
- guests/linux: If SMB folder mounting fails, the password will no
longer be shown in plaintext in the output. [GH-3203]
- guests/linux: SMB mount works with passwords with symbols. [GH-3202]
- providers/hyperv: Check for PowerShell features. [GH-3398]
- provisioners/docker: Don't automatically generate container name with
a forward slash. [GH-3216]
- provisioners/shell: Empty shell scripts don't cause errors. [GH-3423]
- synced\_folders/smb: Only set the chmod properly by default on Windows
if it isn't already set. [GH-3394]
- synced\_folders/smb: Sharing folders with odd characters like parens
works properly now. [GH-3405]
## 1.5.2 (April 2, 2014)
IMPROVEMENTS:
- **New guest:** SmartOS
- core: Change wording from "error" to "warning" on SSH retry output
to convey actual meaning.
- commands/plugin: Listing plugins now has machine-readable output. [GH-3293]
- guests/omnios: Mount NFS capability [GH-3282]
- synced\_folders/smb: Verify PowerShell v3 or later is running. [GH-3257]
BUG FIXES:
- core: Vagrant won't collide with newer versions of Bundler [GH-3193]
- core: Allow provisioner plugins to not have a config class. [GH-3272]
- core: Removing a specific box version that doesn't exist doesn't
crash Vagrant. [GH-3364]
- core: SSH commands are forced to be ASCII.
- core: private networks with DHCP type work if type parameter is
a string and not a symbol. [GH-3349]
- core: Converting to cygwin path works for folders with spaces. [GH-3304]
- core: Can add boxes with spaces in their path. [GH-3306]
- core: Prerelease plugins installed are locked to that prerelease
version. [GH-3301]
- core: Better error message when adding a box with a malformed version. [GH-3332]
- core: Fix a rare issue where vagrant up would complain it couldn't
check version of a box that doesn't exist. [GH-3326]
- core: Box version constraint can't be specified with old-style box. [GH-3260]
- commands/box: Show versions when listing. [GH-3316]
- commands/box: Outdated check can list local boxes that are newer. [GH-3321]
- commands/status: Machine readable output contains the target. [GH-3218]
- guests/arch: Reload udev rules after network change. [GH-3322]
- guests/debian: Changing host name works properly. [GH-3283]
- guests/suse: Shutdown works correctly on SLES [GH-2775]
- hosts/linux: Don't hardcode `exportfs` path. Now searches the PATH. [GH-3292]
- providers/hyperv: Resume command works properly. [GH-3336]
- providers/virtualbox: Add missing translation for stopping status. [GH-3368]
- providers/virtualbox: Host-only networks set cableconnected property
to "yes" [GH-3365]
- provisioners/docker: Use proper flags for 0.9. [GH-3356]
- synced\_folders/rsync: Set chmod flag by default on Windows. [GH-3256]
- synced\_folders/smb: IDs of synced folders are hashed to work better
with VMware. [GH-3219]
- synced\_folders/smb: Properly remove existing folders with the
same name. [GH-3354]
- synced\_folders/smb: Passwords with symbols now work. [GH-3242]
- synced\_folders/smb: Exporting works for non-english locale Windows
machines. [GH-3251]
## 1.5.1 (March 13, 2014)
IMPROVEMENTS:
- guests/tinycore: Will now auto-install rsync.
- synced\_folders/rsync: rsync-auto will not watch filesystem for
excluded paths. [GH-3159]
BUG FIXES:
- core: V1 Vagrantfiles can upgrade provisioners properly. [GH-3092]
- core: Rare EINVAL errors on box adding are gone. [GH-3094]
- core: Upgrading the home directory for Vagrant 1.5 uses the Vagrant
temp dir. [GH-3095]
- core: Assume a box isn't metadata if it exceeds 20 MB. [GH-3107]
- core: Asking for input works even in consoles that don't support
hiding input. [GH-3119]
- core: Adding a box by path in Cygwin on Windos works. [GH-3132]
- core: PowerShell scripts work when they're in a directory with
spaces. [GH-3100]
- core: If you add a box path that doesn't exist, error earlier. [GH-3091]
- core: Validation on forwarded ports to make sure they're between
0 and 65535. [GH-3187]
- core: Downloads with user/password use the curl `-u` flag. [GH-3183]
- core: `vagrant help` no longer loads the Vagrantfile. [GH-3180]
- guests/darwin: Fix an exception when configuring networks. [GH-3143]
- guests/linux: Only chown folders/files in rsync if they don't
have the proper owner. [GH-3186]
- hosts/linux: Unusual sed delimiter to avoid conflicts. [GH-3167]
- providers/virtualbox: Make more internal interactions with VBoxManage
retryable to avoid spurious VirtualBox errors. [GH-2831]
- providers/virtualbox: Import progress works again on Windows.
- provisioners/ansible: Request SSH info within the provision method,
when we know its available. [GH-3111]
- synced\_folders/rsync: owner/group settings work. [GH-3163]
## 1.5.0 (March 10, 2014)
BREAKING CHANGES:
- provisioners/ansible: the machine name (taken from Vagrantfile) is now
set as default limit to ensure that vagrant provision steps only
affect the expected machine.
DEPRECATIONS:
- provisioners/chef-solo: The "nfs" setting has been replaced by
`synced_folder_type`. The "nfs" setting will be removed in the next
version.
- provisioners/puppet: The "nfs" setting has been replaced by
`synced_folder_type`. The "nfs" setting will be removed in the next
version.
FEATURES:
- **New provider:** Hyper-V. If you're on a Windows machine with Hyper-V
enabled, Vagrant can now manage Hyper-V virtual machines out of the box.
- **New guest:** Funtoo (change host name and networks supported)
- **New guest:** NetBSD
- **New guest:** TinyCore Linux. This allows features such as networking,
halting, rsync and more work with Boot2Docker.
- **New synced folder type:** rsync - Does a one-time one-directional sync
to the guest machine. New commands `vagrant rsync` and `vagrant rsync-auto`
can resync the folders.
- **New synced folder type:** SMB- Allows bi-directional folder syncing
using SMB on Windows hosts with any guest.
- Password-based SSH authentication. This lets you use almost any off-the-shelf
virtual machine image with Vagrant. Additionally, Vagrant will automatically
insert a keypair into the machine.
- Plugin versions can now be constrained to a range of versions. Example:
`vagrant plugin install foo --plugin-version "> 1.0, < 1.1"`
- Host-specific operations now use a "host capabilities" system much like
guests have used "guest capabilities" for a few releases now. This allows
plugin developers to create pluggable host-specific capabilities and makes
further integrating Vagrant with new operating systems even easier.
- You can now override provisioners within sub-VM configuration and
provider overrides. See documentation for more info. [GH-1113]
- providers/virtualbox: Provider-specific configuration `cpus` can be used
to set the number of CPUs on the VM [GH-2800]
- provisioners/docker: Can now build images using `docker build`. [GH-2615]
IMPROVEMENTS:
- core: Added "error-exit" type to machine-readable output which contains
error information that caused a non-zero exit status. [GH-2999]
- command/destroy: confirmation will re-ask question if bad input. [GH-3027]
- guests/solaris: More accurate Solaris >= 11, < 11 detection. [GH-2824]
- provisioners/ansible: Generates a single inventory file, rather than
one per machine. See docs for more info. [GH-2991]
- provisioners/ansible: SSH forwarding support. [GH-2952]
- provisioners/ansible: Multiple SSH keys can now be attempted [GH-2952]
- provisioners/ansible: Disable SSH host key checking by default,
which improves the experience. We believe this is a sane default
for ephemeral dev machines.
- provisioners/chef-solo: New config `synced_folder_type` replaces the
`nfs` option. This can be used to set the synced folders the provisioner
needs to any type. [GH-2709]
- provisioners/chef-solo: `roles_paths` can now be an array of paths in
Chef 11.8.0 and newer. [GH-2975]
- provisioners/docker: Can start a container without daemonization.
- provisioners/docker: Started containers are given names. [GH-3051]
- provisioners/puppet: New config `synced_folder_type` replaces the
`nfs` option. This can be used to set the synced folders the provisioner
needs to any type. [GH-2709]
- commands/plugin: `vagrant plugin update` will now update all installed
plugins, respecting any constraints set.
- commands/plugin: `vagrant plugin uninstall` can now uninstall multiple
plugins.
- commands/plugin: `vagrant plugin install` can now install multiple
plugins.
- hosts/redhat: Recognize Korora OS. [GH-2869]
- synced\_folders/nfs: If the guest supports it, NFS clients will be
automatically installed in the guest.
BUG FIXES:
- core: If an exception was raised while attempting to connect to SSH
for the first time, it would get swallowed. It is properly raised now.
- core: Plugin installation does not fail if your local gemrc file has
syntax errors.
- core: Plugins that fork within certain actions will no longer hang
indefinitely. [GH-2756]
- core: Windows checks home directory permissions more correctly to
warn of potential issues.
- core: Synced folders set to the default synced folder explicitly won't
be deleted. [GH-2873]
- core: Static IPs can end in ".1". A warning is now shown. [GH-2914]
- core: Adding boxes that have directories in them works on Windows.
- core: Vagrant will not think provisioning is already done if
the VM is manually deleted outside of Vagrant.
- core: Box file checksums of large files works properly on Windows.
[GH-3045]
- commands/box: Box add `--force` works with `--provider` flag. [GH-2757]
- commands/box: Listing boxes with machine-readable output crash is gone.
- commands/plugin: Plugin installation will fail if dependencies conflict,
rather than at runtime.
- commands/ssh: When using `-c` on Windows, no more TTY errors.
- commands/ssh-config: ProxyCommand is included in output if it is
set. [GH-2950]
- guests/coreos: Restart etcd after configuring networks. [GH-2852]
- guests/linux: Don't chown VirtualBox synced folders if mounting
as readonly. [GH-2442]
- guests/redhat: Set hostname to FQDN, per the documentation for RedHat.
[GH-2792]
- hosts/bsd: Don't invoke shell for NFS sudo calls. [GH-2808]
- hosts/bsd: Sort NFS exports to avoid false validation errors. [GH-2927]
- hosts/bsd: No more checkexports NFS errors if you're sharing the
same directory. [GH-3023]
- hosts/gentoo: Look for systemctl in `/usr/bin` [GH-2858]
- hosts/linux: Properly escape regular expression to prune NFS exports,
allowing VMware to work properly. [GH-2934]
- hosts/opensuse: Start NFS server properly. [GH-2923]
- providers/virtualbox: Enabling internal networks by just setting "true"
works properly. [GH-2751]
- providers/virtualbox: Make more internal interactions with VBoxManage
retryable to avoid spurious VirtualBox errors. [GH-2831]
- providers/virtualbox: Config validation catches invalid keys. [GH-2843]
- providers/virtualbox: Fix network adapter configuration issue if using
provider-specific config. [GH-2854]
- providers/virtualbox: Bridge network adapters always have their
"cable connected" properly. [GH-2906]
- provisioners/chef: When chowning folders, don't follow symlinks.
- provisioners/chef: Encrypted data bag secrets also in Chef solo are
now uploaded to the provisioning path to avoid perm issues. [GH-2845]
- provisioners/chef: Encrypted data bag secret is removed from the
machine before and after provisioning also with Chef client. [GH-2845]
- provisioners/chef: Set `encrypted_data_bag_secret` on the VM to `nil`
if the secret is not specified. [GH-2984]
- provisioners/chef: Fix loading of the custom configure file. [GH-876]
- provisioners/docker: Only add SSH user to docker group if the user
isn't already in it. [GH-2838]
- provisioners/docker: Configuring autostart works properly with
the newest versions of Docker. [GH-2874]
- provisioners/puppet: Append default module path to the module paths
always. [GH-2677]
- provisioners/salt: Setting pillar data doesn't require `deep_merge`
plugin anymore. [GH-2348]
- provisioners/salt: Options can now set install type and install args.
[GH-2766]
- provisioners/salt: Fix case when salt would say "options only allowed
before install arguments" [GH-3005]
- provisioners/shell: Error if script is encoded incorrectly. [GH-3000]
- synced\_folders/nfs: NFS entries are pruned on every `vagrant up`,
if there are any to prune. [GH-2738]
## 1.4.3 (January 2, 2014)
BUG FIXES:
- providers/virtualbox: `vagrant package` works properly again. [GH-2739]
## 1.4.2 (December 31, 2013)
IMPROVEMENTS:
- guests/linux: emit upstart event when NFS folders are mounted. [GH-2705]
- provisioners/chef-solo: Encrypted data bag secret is removed from the
machine after provisioning. [GH-2712]
BUG FIXES:
- core: Ctrl-C no longer raises "trap context" exception.
- core: The version for `Vagrant.configure` can now be an int. [GH-2689]
- core: `Vagrant.has_plugin?` tries to use plugin's gem name before
registered plugin name [GH-2617]
- core: Fix exception if an EOFError was somehow raised by Ruby while
checking a box checksum. [GH-2716]
- core: Better error message if your plugin state file becomes corrupt
somehow. [GH-2694]
- core: Box add will fail early if the box already exists. [GH-2621]
- hosts/bsd: Only run `nfsd checkexports` if there is an exports file.
[GH-2714]
- commands/plugin: Fix exception that could happen rarely when installing
a plugin.
- providers/virtualbox: Error when packaging if the package already exists
_before_ the export is done. [GH-2380]
- providers/virtualbox: NFS with static IP works even if VirtualBox
guest additions aren't installed (regression). [GH-2674]
- synced\_folders/nfs: sudo will only ask for password one at a time
when using a parallel provider [GH-2680]
## 1.4.1 (December 18, 2013)
IMPROVEMENTS:
- hosts/bsd: check NFS exports file for issues prior to exporting
- provisioners/ansible: Add ability to use Ansible groups in generated
inventory [GH-2606]
- provisioners/docker: Add support for using the provisioner with RedHat
based guests [GH-2649]
- provisioners/docker: Remove "Docker" prefix from Client and Installer
classes [GH-2641]
BUG FIXES:
- core: box removal of a V1 box works
- core: `vagrant ssh -c` commands are now executed in the context of
a login shell (regression). [GH-2636]
- core: specifying `-t` or `-T` to `vagrant ssh -c` as extra args
will properly enable/disable a TTY for OpenSSH. [GH-2618]
- commands/init: Error if can't write Vagrantfile to directory. [GH-2660]
- guests/debian: fix `use_dhcp_assigned_default_route` to work properly.
[GH-2648]
- guests/debian,ubuntu: fix change\_host\_name for FQDNs with trailing
dots [GH-2610]
- guests/freebsd: configuring networks in the guest works properly
[GH-2620]
- guests/redhat: fix configure networks bringing down interfaces that
don't exist. [GH-2614]
- providers/virtualbox: Don't override NFS exports for all VMs when
coming up. [GH-2645]
- provisioners/ansible: Array arguments work for raw options [GH-2667]
- provisioners/chef-client: Fix node/client deletion when node\_name is not
set. [GH-2345]
- provisioners/chef-solo: Force remove files to avoid cases where
a prompt would be shown to users. [GH-2669]
- provisioners/puppet: Don't prepend default module path for Puppet
in case Puppet is managing its own paths. [GH-2677]
## 1.4.0 (December 9, 2013)
FEATURES:
- New provisioner: Docker. Install Docker, pull containers, and run
containers easier than ever.
- Machine readable output. Vagrant now has machine-friendly output by
using the `--machine-readable` flag.
- New plugin type: synced folder implementation. This allows new ways of
syncing folders to be added as plugins to Vagrant.
- The `Vagrant.require_version` function can be used at the top of a Vagrantfile
to enforce a minimum/maximum Vagrant version.
- Adding boxes via `vagrant box add` and the Vagrantfile both support
providing checksums of the box files.
- The `--debug` flag can be specified on any command now to get debug-level
log output to ease reporting bugs.
- You can now specify a memory using `vb.memory` setting with VirtualBox.
- Plugin developers can now hook into `environment_plugins_loaded`, which is
executed after plugins are loaded but before Vagrantfiles are parsed.
- VirtualBox internal networks are now supported. [GH-2020]
IMPROVEMENTS:
- core: Support resumable downloads [GH-57]
- core: owner/group of shared folders can be specified by integers. [GH-2390]
- core: the VAGRANT\_NO\_COLOR environmental variable may be used to enable
`--no-color` mode globally. [GH-2261]
- core: box URL and add date is tracked and shown if `-i` flag is
specified for `vagrant box list` [GH-2327]
- core: Multiple SSH keys can be specified with `config.ssh.private_key_path`
[GH-907]
- core: `config.vm.box_url` can be an array of URLs. [GH-1958]
- commands/box/add: Can now specify a custom CA cert for verifying
certs from a custom CA. [GH-2337]
- commands/box/add: Can now specify a client cert when downloading a
box. [GH-1889]
- commands/init: Add `--output` option for specifing output path, or
"-" for stdin. [GH-1364]
- commands/provision: Add `--no-parallel` option to disable provider
parallelization if the provider supports it. [GH-2404]
- commands/ssh: SSH compression is enabled by default. [GH-2456]
- commands/ssh: Inline commands specified with "-c" are now executed
using OpenSSH rather than pure-Ruby SSH. It is MUCH faster, and
stdin works!
- communicators/ssh: new configuration `config.ssh.pty` is a boolean for
whether you want ot use a PTY for provisioning.
- guests/linux: emit upstart event `vagrant-mounted` if upstart is
available. [GH-2502]
- guests/pld: support changing hostname [GH-2543]
- providers/virtualbox: Enable symlinks for VirtualBox 4.1. [GH-2414]
- providers/virtualbox: default VM name now includes milliseconds with
a random number to try to avoid conflicts in CI environments. [GH-2482]
- providers/virtualbox: customizations via VBoxManage are retried, avoiding
VirtualBox flakiness [GH-2483]
- providers/virtualbox: NFS works with DHCP host-only networks now. [GH-2560]
- provisioners/ansible: allow files for extra vars [GH-2366]
- provisioners/puppet: client cert and private key can now be specified
for the puppet server provisioner. [GH-902]
- provisioners/puppet: the manifests path can be in the VM. [GH-1805]
- provisioners/shell: Added `keep_color` option to not automatically color
output based on stdout/stderr. [GH-2505]
- provisioners/shell: Arguments can now be an array of args. [GH-1949]
- synced\_folders/nfs: Specify `nfs_udp` to false to disable UDP based
NFS folders. [GH-2304]
BUG FIXES:
- core: Make sure machine IDs are always strings. [GH-2434]
- core: 100% CPU spike when waiting for SSH is fixed. [GH-2401]
- core: Command lookup works on systems where PATH is not valid UTF-8 [GH-2514]
- core: Human-friendly error if box metadata.json becomes corrupted. [GH-2305]
- core: Don't load Vagrantfile on `vagrant plugin` commands, allowing
Vagrantfiles that use plugins to work. [GH-2388]
- core: global flags are ignored past the "--" on the CLI. [GH-2491]
- core: provisoining will properly happen if `up` failed. [GH-2488]
- guests/freebsd: Mounting NFS folders works. [GH-2400]
- guests/freebsd: Uses `sh` by default for shell. [GH-2485]
- guests/linux: upstart events listening for `vagrant-mounted` won't
wait for jobs to complete, fixing issues with blocking during
vagrant up [GH-2564]
- guests/redhat: `DHCP_HOSTNAME` is set to the hostname, not the FQDN. [GH-2441]
- guests/redhat: Down interface before messing up configuration file
for networking. [GH-1577]
- guests/ubuntu: "localhost" is preserved when changing hostnames.
[GH-2383]
- hosts/bsd: Don't set mapall if maproot is set in NFS. [GH-2448]
- hosts/gentoo: Support systemd for NFS startup. [GH-2382]
- providers/virtualbox: Don't start new VM if VirtualBox has transient
failure during `up` from suspended. [GH-2479]
- provisioners/chef: Chef client encrypted data bag secrets are now
uploaded to the provisioning path to avoid perm issues. [GH-1246]
- provisioners/chef: Create/chown the cache and backup folders. [GH-2281]
- provisioners/chef: Verify environment paths exist in config
validation step. [GH-2381]
- provisioners/puppet: Multiple puppet definitions in a Vagrantfile
work correctly.
- provisioners/salt: Bootstrap on FreeBSD systems work. [GH-2525]
- provisioners/salt: Extra args for bootstrap are put in the proper
location. [GH-2558]
## 1.3.5 (October 15, 2013)
FEATURES:
- VirtualBox 4.3 is now supported. [GH-2374]
- ESXi is now a supported guest OS. [GH-2347]
IMPROVEMENTS:
- guests/redhat: Oracle Linux is now supported. [GH-2329]
- provisioners/salt: Support running overstate. [GH-2313]
BUG FIXES:
- core: Fix some places where "no error message" errors were being
reported when in fact there were errors. [GH-2328]
- core: Disallow hyphens or periods for starting hostnames. [GH-2358]
- guests/ubuntu: Setting hostname works properly. [GH-2334]
- providers/virtualbox: Retryable VBoxManage commands are properly
retried. [GH-2365]
- provisioners/ansible: Verbosity won't be blank by default. [GH-2320]
- provisioners/chef: Fix exception raised during Chef client node
cleanup. [GH-2345]
- provisioners/salt: Correct master seed file name. [GH-2359]
## 1.3.4 (October 2, 2013)
FEATURES:
- provisioners/shell: Specify the `binary` option as true and Vagrant won't
automatically replace Windows line endings with Unix ones. [GH-2235]
IMPROVEMENTS:
- guests/suse: Support installing CFEngine. [GH-2273]
BUG FIXES:
- core: Don't output `\e[0K` anymore on Windows. [GH-2246]
- core: Only modify `DYLD_LIBRARY_PATH` on Mac when executing commands
in the installer context. [GH-2231]
- core: Clear `DYLD_LIBRARY_PATH` on Mac if the subprocess is executing
a setuid or setgid script. [GH-2243]
- core: Defined action hook names can be strings now. They are converted
to symbols internally.
- guests/debian: FQDN is properly set when setting the hostname. [GH-2254]
- guests/linux: Fix poor chown command for mounting VirtualBox folders.
- guests/linux: Don't raise exception right away if mounting fails, allow
retries. [GH-2234]
- guests/redhat: Changing hostname changes DHCP_HOSTNAME. [GH-2267]
- hosts/arch: Vagrant won't crash on Arch anymore. [GH-2233]
- provisioners/ansible: Extra vars are converted to strings. [GH-2244]
- provisioners/ansible: Output will show up on a task-by-task basis. [GH-2194]
- provisioners/chef: Propagate disabling color if Vagrant has no color
enabled. [GH-2246]
- provisioners/chef: Delete from chef server exception fixed. [GH-2300]
- provisioners/puppet: Work with restrictive umask. [GH-2241]
- provisioners/salt: Remove bootstrap definition file on each run in
order to avoid permissions issues. [GH-2290]
## 1.3.3 (September 18, 2013)
BUG FIXES:
- core: Fix issues with dynamic linker not finding symbols on OS X. [GH-2219]
- core: Properly clean up machine directories on destroy. [GH-2223]
- core: Add a timeout to waiting for SSH connection and server headers
on SSH. [GH-2226]
## 1.3.2 (September 17, 2013)
IMPROVEMENTS:
- provisioners/ansible: Support more verbosity levels, better documentation.
[GH-2153]
- provisioners/ansible: Add `host_key_checking` configuration. [GH-2203]
BUG FIXES:
- core: Report the proper invalid state when waiting for the guest machine
to be ready
- core: `Guest#capability?` now works with strings as well
- core: Fix NoMethodError in the new `Vagrant.has_plugin?` method [GH-2189]
- core: Convert forwarded port parameters to integers. [GH-2173]
- core: Don't spike CPU to 100% while waiting for machine to boot. [GH-2163]
- core: Increase timeout for individual SSH connection to 60 seconds. [GH-2163]
- core: Call realpath after creating directory so NFS directory creation
works. [GH-2196]
- core: Don't try to be clever about deleting the machine state
directory anymore. Manually done in destroy actions. [GH-2201]
- core: Find the root Vagrantfile only if Vagrantfile is a file, not
a directory. [GH-2216]
- guests/linux: Try `id -g` in addition to `getent` for mounting
VirtualBox shared folders [GH-2197]
- hosts/arch: NFS exporting works properly, no exceptions. [GH-2161]
- hosts/bsd: Use only `sudo` for writing NFS exports. This lets NFS
exports work if you have sudo privs but not `su`. [GH-2191]
- hosts/fedora: Fix host detection encoding issues. [GH-1977]
- hosts/linux: Fix NFS export problems with `no_subtree_check`. [GH-2156]
- installer/mac: Vagrant works properly when a library conflicts from
homebrew. [GH-2188]
- installer/mac: deb/rpm packages now have an epoch of 1 so that new
installers don't appear older. [GH-2179]
- provisioners/ansible: Default output level is now verbose again. [GH-2194]
- providers/virtualbox: Fix an issue where destroy middlewares weren't
being properly called. [GH-2200]
## 1.3.1 (September 6, 2013)
BUG FIXES:
- core: Fix various issues where using the same options hash in a
Vagrantfile can cause errors.
- core: `VAGRANT_VAGRANTFILE` env var only applies to the project
Vagrantfile name. [GH-2130]
- core: Fix an issue where the data directory would be deleted too
quickly in a multi-VM environment.
- core: Handle the case where we get an EACCES cleaning up the .vagrant
directory.
- core: Fix exception on upgrade warnings from V1 to V2. [GH-2142]
- guests/coreos: Proper IP detection. [GH-2146]
- hosts/linux: NFS exporting works properly again. [GH-2137]
- provisioners/chef: Work even with restrictive umask on user. [GH-2121]
- provisioners/chef: Fix environment validation to be less restrictive.
- provisioners/puppet: No more "shared folders cannot be found" error.
[GH-2134]
- provisioners/puppet: Work with restrictive umask on user by testing
for folders with sudo. [GH-2121]
## 1.3.0 (September 5, 2013)
BACKWARDS INCOMPATIBILITY:
- `config.ssh.max_tries` is gone. Instead of maximum tries, Vagrant now
uses a simple overall timeout value `config.vm.boot_timeout` to wait for
the machine to boot up.
- `config.vm.graceful_halt_retry_*` settings are gone. Instead, a single
timeout is now used to wait for a graceful halt to work, specified
by `config.vm.graceful_halt_timeout`.
- The ':extra' flag to shared folders for specifying arbitrary mount
options has been replaced with the `:mount_options` flag, which is now
an array of mount options.
- `vagrant up` will now only run provisioning by default the first time
it is run. Subsequent `reload` or `up` will need to explicitly specify
the `--provision` flag to provision. [GH-1776]
FEATURES:
- New command: `vagrant plugin update` to update specific installed plugins.
- New provisioner: File provisioner. [GH-2112]
- New provisioner: Salt provisioner. [GH-1626]
- New guest: Mac OS X guest support. [GH-1914]
- New guest: CoreOS guest support. Change host names and configure networks on
CoreOS. [GH-2022]
- New guest: Solaris 11 guest support. [GH-2052]
- Support for environments in the Chef-solo provisioner. [GH-1915]
- Provisioners can now define "cleanup" tasks that are executed on
`vagrant destroy`. [GH-1302]
- Chef Client provisioner will now clean up the node/client using
`knife` if configured to do so.
- `vagrant up` has a `--no-destroy-on-error` flag that will not destroy
the VM if a fatal error occurs. [GH-2011]
- NFS: Arbitrary mount options can be specified using the
`mount_options` option on synced folders. [GH-1029]
- NFS: Arbitrary export options can be specified using
`bsd__nfs_options` and `linux__nfs_options`. [GH-1029]
- Static IP can now be set on public networks. [GH-1745]
- Add `Vagrant.has_plugin?` method for use in Vagrantfile to check
if a plugin is installed. [GH-1736]
- Support for remote shell provisioning scripts [GH-1787]
IMPROVEMENTS:
- core: add `--color` to any Vagrant command to FORCE color output. [GH-2027]
- core: "config.vm.host_name" works again, just an alias to hostname.
- core: Reboots via SSH are now handled gracefully (without exception).
- core: Mark `disabled` as true on forwarded port to disable. [GH-1922]
- core: NFS exports are now namespaced by user ID, so pruning NFS won't
remove exports from other users. [GH-1511]
- core: "vagrant -v" no longer loads the Vagrantfile
- commands/box/remove: Fix stack trace that happens if no provider
is specified. [GH-2100]
- commands/plugin/install: Post install message of a plugin will be
shown if available. [GH-1986]
- commands/status: cosmetic improvement to better align names and
statuses [GH-2016]
- communicators/ssh: Support a proxy_command. [GH-1537]
- guests/openbsd: support configuring networks, changing host name,
and mounting NFS. [GH-2086]
- guests/suse: Supports private/public networks. [GH-1689]
- hosts/fedora: Support RHEL as a host. [GH-2088]
- providers/virtualbox: "post-boot" customizations will run directly
after boot, and before waiting for SSH. [GH-2048]
- provisioners/ansible: Many more configuration options. [GH-1697]
- provisioners/ansible: Ansible `inventory_path` can be a directory now. [GH-2035]
- provisioners/ansible: Extra verbose option by setting `config.verbose`
to `extra`. [GH-1979]
- provisioners/ansible: `inventory_path` will be auto-generated if not
specified. [GH-1907]
- provisioners/puppet: Add `nfs` option to puppet provisioner. [GH-1308]
- provisioners/shell: Set the `privileged` option to false to run
without sudo. [GH-1370]
BUG FIXES:
- core: Clean up ".vagrant" folder more effectively.
- core: strip newlines off of ID file values [GH-2024]
- core: Multiple forwarded ports with different protocols but the same
host port can be specified. [GH-2059]
- core: `:nic_type` option for private networks is respected. [GH-1704]
- commands/up: provision-with validates the provisioners given. [GH-1957]
- guests/arch: use systemd way of setting host names. [GH-2041]
- guests/debian: Force bring up eth0. Fixes hangs on setting hostname.
[GH-2026]
- guests/ubuntu: upstart events are properly emitted again. [GH-1717]
- hosts/bsd: Nicer error if can't read NFS exports. [GH-2038]
- hosts/fedora: properly detect later CentOS versions. [GH-2008]
- providers/virtualbox: VirtualBox 4.2 now supports up to 36
network adapters. [GH-1886]
- provisioners/ansible: Execute ansible with a cwd equal to the
path where the Vagrantfile is. [GH-2051]
- provisioners/all: invalid config keys will be properly reported. [GH-2117]
- provisioners/ansible: No longer report failure on every run. [GH-2007]
- provisioners/ansible: Properly handle extra vars with spaces. [GH-1984]
- provisioners/chef: Formatter option works properly. [GH-2058]
- provisioners/chef: Create/chown the provisioning folder before
reading contents. [GH-2121]
- provisioners/puppet: mount synced folders as root to avoid weirdness
- provisioners/puppet: Run from the correct working directory. [GH-1967]
with Puppet. [GH-2015]
- providers/virtualbox: Use `getent` to get the group ID instead of
`id` in case the name doesn't have a user. [GH-1801]
- providers/virtualbox: Will only set the default name of the VM on
initial `up`. [GH-1817]
## 1.2.7 (July 28, 2013)
BUG FIXES:
- On Windows, properly convert synced folder host path to a string
so that separator replacement works properly.
- Use `--color=false` for no color in Puppet to support older
versions properly. [GH-2000]
- Make sure the hostname configuration is a string. [GH-1999]
- cURL downloads now contain a user agent which fixes some
issues with downloading Vagrant through proxies. [GH-2003]
- `vagrant plugin install` will now always properly show the actual
installed gem name. [GH-1834]
## 1.2.6 (July 26, 2013)
BUG FIXES:
- Box collections with multiple formats work properly by converting
the supported formats to symbols. [GH-1990]
## 1.2.5 (July 26, 2013)
FEATURES:
- `vagrant help <command>` now works. [GH-1578]
- Added `config.vm.box_download_insecure` to allow the box_url setting
to point to an https site that won't be validated. [GH-1712]
- VirtualBox VBoxManage customizations can now be specified to run
pre-boot (the default and existing functionality, pre-import,
or post-boot. [GH-1247]
- VirtualBox no longer destroys unused network interfaces by default.
This didn't work across multi-user systems and required admin privileges
on Windows, so it has been disabled by default. It can be enabled using
the VirtualBox provider-specific `destroy_unused_network_interfaces`
configuration by setting it to true. [GH-1324]
IMPROVEMENTS:
- Remote commands that fail will now show the stdout/stderr of the
command that failed. [GH-1203]
- Puppet will run without color if the UI is not colored. [GH-1344]
- Chef supports the "formatter" configuration for setting the
formatter. [GH-1250]
- VAGRANT_DOTFILE_PATH environmental variable reintroduces the
functionality removed in 1.1 from "config.dotfile_name" [GH-1524]
- Vagrant will show an error if VirtualBox 4.2.14 is running.
- Added provider to BoxNotFound error message. [GH-1692]
- If Ansible fails to run properly, show an error message. [GH-1699]
- Adding a box with the `--provider` flag will now allow a box for
any of that provider's supported formats.
- NFS mounts enable UDP by default, resulting in higher performance.
(Because mount is over local network, packet loss is not an issue)
[GH-1706]
BUG FIXES:
- `box_url` now handles the case where the provider doesn't perfectly
match the provider in use, but the provider supports it. [GH-1752]
- Fix uninitialized constant error when configuring Arch Linux network. [GH-1734]
- Debian/Ubuntu change hostname works properly if eth0 is configured
with hot-plugging. [GH-1929]
- NFS exports with improper casing on Mac OS X work properly. [GH-1202]
- Shared folders overriding '/vagrant' in multi-VM environments no
longer all just use the last value. [GH-1935]
- NFS export fsid's are now 32-bit integers, rather than UUIDs. This
lets NFS exports work with Linux kernels older than 2.6.20. [GH-1127]
- NFS export allows access from all private networks on the VM. [GH-1204]
- Default VirtualBox VM name now contains the machine name as defined
in the Vagrantfile, helping differentiate multi-VM. [GH-1281]
- NFS works properly on CentOS hosts. [GH-1394]
- Solaris guests actually shut down properly. [GH-1506]
- All provisioners only output newlines when the provisioner sends a
newline. This results in the output looking a lot nicer.
- Sharing folders works properly if ".profile" contains an echo. [GH-1677]
- `vagrant ssh-config` IdentityFile is only wrapped in quotes if it
contains a space. [GH-1682]
- Shared folder target path can be a Windows path. [GH-1688]
- Forwarded ports don't auto-correct by default, and will raise an
error properly if they collide. [GH-1701]
- Retry SSH on ENETUNREACH error. [GH-1732]
- NFS is silently ignored on Windows. [GH-1748]
- Validation so that private network static IP does not end in ".1" [GH-1750]
- With forward agent enabled and sudo being used, Vagrant will automatically
discover and set `SSH_AUTH_SOCK` remotely so that forward agent
works properly despite misconfigured sudoers. [GH-1307]
- Synced folder paths on Windows containing '\' are replaced with
'/' internally so that they work properly.
- Unused config objects are finalized properly. [GH-1877]
- Private networks work with Fedora guests once again. [GH-1738]
- Default internal encoding of strings in Vagrant is now UTF-8, allowing
detection of Fedora to work again (which contained a UTF-8 string). [GH-1977]
## 1.2.4 (July 16, 2013)
FEATURES:
- Chef solo and client provisioning now support a `custom_config_path`
setting that accepts a path to a Ruby file to load as part of Chef
configuration, allowing you to override any setting available. [GH-876]
- CFEngine provisioner: you can now specify the package name to install,
so CFEngine enterprise is supported. [GH-1920]
IMPROVEMENTS:
- `vagrant box remove` works with only the name of the box if that
box exists only backed by one provider. [GH-1032]
- `vagrant destroy` returns exit status 1 if any of the confirmations
are declined. [GH-923]
- Forwarded ports can specify a host IP and guest IP to bind to. [GH-1121]
- You can now set the "ip" of a private network that uses DHCP. This will
change the subnet and such that the DHCP server uses.
- Add `file_cache_path` support for chef_solo. [GH-1897]
BUG FIXES:
- VBoxManage or any other executable missing from PATH properly
reported. Regression from 1.2.2. [GH-1928]
- Boxes downloaded as part of `vagrant up` are now done so _prior_ to
config validation. This allows Vagrantfiles to references files that
may be in the box itself. [GH-1061]
- Chef removes dna.json and encrypted data bag secret file prior to
uploading. [GH-1111]
- NFS synced folders exporting sub-directories of other exported folders now
works properly. [GH-785]
- NFS shared folders properly dereference symlinks so that the real path
is used, avoiding mount errors [GH-1101]
- SSH channel is closed after the exit status is received, potentially
eliminating any SSH hangs. [GH-603]
- Fix regression where VirtualBox detection wasn't working anymore. [GH-1918]
- NFS shared folders with single quotes in their name now work properly. [GH-1166]
- Debian/Ubuntu request DHCP renewal when hostname changes, which will
fix issues with FQDN detecting. [GH-1929]
- SSH adds the "DSAAuthentication=yes" option in case that is disabled
on the user's system. [GH-1900]
## 1.2.3 (July 9, 2013)
FEATURES:
- Puppet provisioner now supports Hiera by specifying a `hiera_config_path`.
- Added a `working_directory` configuration option to the Puppet apply
provisioner so you can specify the working directory when `puppet` is
called, making it friendly to Hiera data and such. [GH-1670]
- Ability to specify the host IP to bind forwarded ports to. [GH-1785]
IMPROVEMENTS:
- Setting hostnames works properly on OmniOS. [GH-1672]
- Better VBoxManage error detection on Windows systems. This avoids
some major issues where Vagrant would sometimes "lose" your VM. [GH-1669]
- Better detection of missing VirtualBox kernel drivers on Linux
systems. [GH-1671]
- More precise detection of Ubuntu/Debian guests so that running Vagrant
within an LXC container works properly now.
- Allow strings in addition to symbols to more places in V1 configuration
as well as V2 configuration.
- Add `ARPCHECK=0` to RedHat OS family network configuration. [GH-1815]
- Add SSH agent forwarding sample to initial Vagrantfile. [GH-1808]
- VirtualBox: Only configure networks if there are any to configure.
This allows linux's that don't implement this capability to work with
Vagrant. [GH-1796]
- Default SSH forwarded port now binds to 127.0.0.1 so only local
connections are allowed. [GH-1785]
- Use `netctl` for Arch Linux network configuration. [GH-1760]
- Improve fedora host detection regular expression. [GH-1913]
- SSH shows a proper error on EHOSTUNREACH. [GH-1911]
BUG FIXES:
- Ignore "guest not ready" errors when attempting to graceful halt and
carry on checks whether the halt succeeded. [GH-1679]
- Handle the case where a roles path for Chef solo isn't properly
defined. [GH-1665]
- Finding V1 boxes now works properly again to avoid "box not found"
errors. [GH-1691]
- Setting hostname on SLES 11 works again. [GH-1781]
- `config.vm.guest` properly forces guests again. [GH-1800]
- The `read_ip_address` capability for linux properly reads the IP
of only the first network interface. [GH-1799]
- Validate that an IP is given for a private network. [GH-1788]
- Fix uninitialized constant error for Gentoo plugin. [GH-1698]
## 1.2.2 (April 23, 2013)
FEATURES:
- New `DestroyConfirm` built-in middleware for providers so they can
more easily conform to the `destroy` action.
IMPROVEMENTS:
- No longer an error if the Chef run list is empty. It is now
a warning. [GH-1620]
- Better locking around handling the `box_url` parameter for
parallel providers.
- Solaris guest is now properly detected on SmartOS, OmniOS, etc. [GH-1639]
- Guest addition version detection is more robust, attempting other
routes to get the version, and also retrying a few times. [GH-1575]
BUG FIXES:
- `vagrant package --base` works again. [GH-1615]
- Box overrides specified in provider config overrides no longer
fail to detect the box. [GH-1617]
- In a multi-machine environment, a box not found won't be downloaded
multiple times. [GH-1467]
- `vagrant box add` with a file path now works correctly on Windows
when a drive letter is specified.
- DOS line endings are converted to Unix line endings for the
shell provisioner automatically. [GH-1495]
## 1.2.1 (April 17, 2013)
FEATURES:
- Add a `--[no-]parallel` flag to `vagrant up` to enable/disable
parallelism. Vagrant will parallelize by default.
IMPROVEMENTS:
- Get rid of arbitrary 4 second sleep when connecting via SSH. The
issue it was attempting to work around may be gone now.
BUG FIXES:
- Chef solo run list properly set. [GH-1608]
- Follow 30x redirects when downloading boxes. [GH-1607]
- Chef client config defaults are done properly. [GH-1609]
- VirtualBox mounts shared folders with the proper owner/group. [GH-1611]
- Use the Mozilla CA cert bundle for cURL so SSL validation works
properly.
## 1.2.0 (April 16, 2013)
BACKWARDS INCOMPATIBILITIES:
- WINDOWS USERS: Vagrant now defaults to using the 'USERPROFILE' environmental
variable for the home directory if it is set. This means that the default
location for the Vagrant home directory is now `%USERPROFILE%/.vagrant.d`.
On Cygwin, this will cause existing Cygwin users to "lose" their boxes.
To work around this, either set `VAGRANT_HOME` to your Cygwin ".vagrant.d"
folder or move your ".vagrant.d" folder to `USERPROFILE`. The latter is
recommended for long-term support.
- The constant `Vagrant::Environment::VAGRANT_HOME` was removed in favor of
`Vagrant::Environment#default_vagrant_home`.
FEATURES:
- Providers can now parallelize! If they explicitly support it, Vagrant
will run "up" and other commands in parallel. For providers such AWS,
this means that your instances will come up in parallel. VirtualBox
does not support this mode.
- Box downloads are now done via `curl` rather than Ruby's built-in
HTTP library. This results in massive speedups, support for SSL
verification, FTP downloads, and more.
- `config.vm.provider` now takes an optional second parameter to the block,
allowing you to override any configuration value. These overrides are
applied last, and therefore override any other configuration value.
Note that while this feature is available, the "Vagrant way" is instead
to use box manifests to ensure that the "box" for every provider matches,
so these sorts of overrides are unnecessary.
- A new "guest capabilities" system to replace the old "guest" system.
This new abstraction allows plugins to define "capabilities" that
certain guest operating systems can implement. This allows greater
flexibility in doing guest-specific behavior.
- Ansible provisioner support. [GH-1465]
- Providers can now support multiple box formats by specifying the
`box_format:` option.
- CFEngine provisioner support.
- `config.ssh.default` settings introduced to set SSH defaults that
providers can still override. [GH-1479]
IMPROVEMENTS:
- Full Windows support in cmd.exe, PowerShell, Cygwin, and MingW based
environments.
- By adding the "disabled" boolean flag to synced folders you can disable
them altogether. [GH-1004]
- Specify the default provider with the `VAGRANT_DEFAULT_PROVIDER`
environmental variable. [GH-1478]
- Invalid settings are now caught and shown in a user-friendly way. [GH-1484]
- Detect PuTTY Link SSH client on Windows and show an error. [GH-1518]
- `vagrant ssh` in Cygwin won't output DOS path file warnings.
- Add `--rtcuseutc on` as a sane default for VirtualBox. [GH-912]
- SSH will send keep-alive packets every 5 seconds by default to
keep connections alive. Can be disabled with `config.ssh.keep_alive`. [GH-516]
- Show a message on `vagrant up` if the machine is already running. [GH-1558]
- "Running provisioner" output now shoes the provisioner shortcut name,
rather than the less-than-helpful class name.
- Shared folders with the same guest path will overwrite each other. No
more shared folder IDs.
- Shell provisioner outputs script it is running. [GH-1568]
- Automatically merge forwarded ports that share the same host
port.
BUG FIXES:
- The `:mac` option for host-only networks is respected. [GH-1536]
- Don't preserve modified time when untarring boxes. [GH-1539]
- Forwarded port auto-correct will not auto-correct to a port
that is also in use.
- Cygwin will always output color by default. Specify `--no-color` to
override this.
- Assume Cygwin has a TTY for asking for input. [GH-1430]
- Expand Cygwin paths to Windows paths for calls to VBoxManage and
for VirtualBox shared folders.
- Output the proper clear line text for shells in Cygwin when
reporting dynamic progress.
- When using `Builder` instances for hooks, the builders will be
merged for the proper before/after chain. [GH-1555]
- Use the Vagrant temporary directory again for temporary files
since they can be quite large and were messing with tmpfs. [GH-1442]
- Fix issue parsing extra SSH args in `vagrant ssh` in multi-machine
environments. [GH-1545]
- Networks come back up properly on RedHat systems after reboot. [GH-921]
- `config.ssh` settings override all detected SSH settings (regression). [GH-1479]
- `ssh-config` won't raise an exception if the VirtualBox machine
is not created. [GH-1562]
- Multiple machines defined in the same Vagrantfile with the same
name will properly merge.
- More robust hostname checking for RedHat. [GH-1566]
- Cookbook path existence for Chef is no longer an error, so that
things like librarian and berkshelf plugins work properly. [GH-1570]
- Chef solo provisioner uses proper SSH username instead of hardcoded
config. [GH-1576]
- Shell provisioner takes ownership of uploaded files properly so
that they can also be manually executed later. [GH-1576]
## 1.1.6 (April 3, 2013)
BUG FIXES:
- Fix SSH re-use connection logic to drop connection if an
error occurs.
## 1.1.5 (April 2, 2013)
IMPROVEMENTS:
- More robust SSH connection close detection.
- Don't load `vagrant plugin` installed plugins when in a Bundler
environment. This happens during plugin development. This will make
Vagrant errors much quieter when developing plugins.
- Vagrant will detect Bundler environments, make assumptions that you're
developing plugins, and will quiet its error output a bit.
- More comprehensive synced folder configuration validation.
- VBoxManage errors now show the output from the command so that
users can potentially know what is wrong.
BUG FIXES:
- Proper error message if invalid provisioner is used. [GH-1515]
- Don't error on graceful halt if machine just shut down very
quickly. [GH-1505]
- Error message if private key for SSH isn't owned by the proper
user. [GH-1503]
- Don't error too early when `config.vm.box` is not properly set.
- Show a human-friendly error if VBoxManage is not found (exit
status 126). [GH-934]
- Action hook prepend/append will only prepend or append once.
- Retry SSH on Errno::EACCES.
- Show an error if an invalid network type is used.
- Don't share Chef solo folder if it doesn't exist on host.
## 1.1.4 (March 25, 2013)
BUG FIXES:
- Default forwarded port adapter for VirtualBox should be 1.
## 1.1.3 (March 25, 2013)
IMPROVEMENTS:
- Puppet apply provisioner now retains the default module path
even while specifying custom module paths. [GH-1207]
- Re-added DHCP support for host-only networks. [GH-1466]
- Ability to specify a plugin version, plugin sources, and
pre-release versions using `--plugin-version`, `--plugin-source`,
and `--plugin-prerelease`. [GH-1461]
- Move VirtualBox guest addition checks to after the machine
boots. [GH-1179]
- Removed `Vagrant::TestHelpers` because it doesn't really work anymore.
- Add PLX linux guest support. [GH-1490]
BUG FIXES:
- Attempt to re-establish SSH connection on `Net::SSH::Disconnect`
- Allow any value that can convert to a string for `Vagrant.plugin`
- Chef solo `recipe_url` works properly again. [GH-1467]
- Port collision detection works properly in VirtualBox with
auto-corrected ports. [GH-1472]
- Fix obscure error when temp directory is world writable when
adding boxes.
- Improved error handling around network interface detection for
VirtualBox [GH-1480]
## 1.1.2 (March 18, 2013)
BUG FIXES:
- When not specifying a cookbooks_path for chef-solo, an error won't
be shown if "cookbooks" folder is missing.
- Fix typo for exception when no host-only network with NFS. [GH-1448]
- Use UNSET_VALUE/nil with args on shell provisioner by default since
`[]` was too truthy. [GH-1447]
## 1.1.1 (March 18, 2013)
IMPROVEMENTS:
- Don't load plugins on any `vagrant plugin` command, so that errors
are avoided. [GH-1418]
- An error will be shown if you forward a port to the same host port
multiple times.
- Automatically convert network, provider, and provisioner names to
symbols internally in case people define them as strings.
- Using newer versions of net-ssh and net-scp. [GH-1436]
BUG FIXES:
- Quote keys to StringBlockEditor so keys with spaces, parens, and
so on work properly.
- When there is no route to host for SSH, re-establish a new connection.
- `vagrant package` once again works, no more nil error. [GH-1423]
- Human friendly error when "metadata.json" is missing in a box.
- Don't use the full path to the manifest file with the Puppet provisioner
because it exposes a bug with Puppet path lookup on VMware.
- Fix bug in VirtualBox provider where port forwarding just didn't work if
you attempted to forward to a port under 1024. [GH-1421]
- Fix cross-device box adds for Windows. [GH-1424]
- Fix minor issues with defaults of configuration of the shell
provisioner.
- Fix Puppet server using "host_name" instead of "hostname" [GH-1444]
- Raise a proper error if no hostonly network is found for NFS with
VirtualBox. [GH-1437]
## 1.1.0 (March 14, 2013)
BACKWARDS INCOMPATIBILITIES:
- Vagrantfiles from 1.0.x that _do not use_ any plugins are fully
backwards compatible. If plugins are used, they must be removed prior
to upgrading. The new plugin system in place will avoid this issue in
the future.
- Lots of changes introduced in the form of a new configuration version and
format, but this is _opt-in_. Old Vagrantfile format continues to be supported,
as promised. To use the new features that will be introduced throughout
the 1.x series, you'll have to upgrade at some point.
FEATURES:
- Groundwork for **providers**, alternate backends for Vagrant that
allow Vagrant to power systems other than VirtualBox. Much improvement
and change will come to this throughout the 1.x lifecycle. The API
will continue to change, features will be added, and more. Specifically,
a revamped system for handling shared folders gracefully across providers
will be introduced in a future release.
- New plugin system which adds much more structure and stability to
the overall API. The goal of this system is to make it easier to write
powerful plugins for Vagrant while providing a backwards-compatible API
so that plugins will always _load_ (though they will almost certainly
not be _functional_ in future versions of Vagrant).
- Plugins are now installed and managed using the `vagrant plugin` interface.
- Allow "file://" URLs for box URLs. [GH-1087]
- Emit "vagrant-mount" upstart event when NFS shares are mounted. [GH-1118]
- Add a VirtualBox provider config `auto_nat_dns_proxy` which when set to
false will not attempt to automatically manage NAT DNS proxy settings
with VirtualBox. [GH-1313]
- `vagrant provision` accepts the `--provision-with` flag [GH-1167]
- Set the name of VirtualBox machines with `virtualbox.name` in the
VirtualBox provider config. [GH-1126]
- `vagrant ssh` will execute an `ssh` binary on Windows if it is on
your PATH. [GH-933]
- The environmental variable `VAGRANT_VAGRANTFILE` can be used to
specify an alternate Vagrantfile filename.
IMPROVEMENTS / BUG FIXES:
- Vagrant works much better in Cygwin environments on Windows by
properly resolving Cygwin paths. [GH-1366]
- Improve the SSH "ready?" check by more gracefully handling timeouts. [GH-841]
- Human friendly error if connection times out for HTTP downloads. [GH-849]
- Detect when the VirtualBox installation is incomplete and error. [GH-846]
- Detect when kernel modules for VirtualBox need to be installed on Gentoo
systems and report a user-friendly error. [GH-710]
- All `vagrant` commands that can take a target VM name can take one even
if you're not in a multi-VM environment. [GH-894]
- Hostname is set before networks are setup to avoid very slow `sudo`
speeds on CentOS. [GH-922]
- `config.ssh.shell` now includes the flags to pass to it, such as `-l` [GH-917]
- The check for whether a port is open or not is more complete by
catching ENETUNREACH errors. [GH-948]
- SSH uses LogLevel FATAL so that errors are still shown.
- Sending a SIGINT (Ctrl-C) very early on when executing `vagrant` no
longer results in an ugly stack trace.
- Chef JSON configuration output is now pretty-printed to be
human readable. [GH-1146]
that SSHing succeeds when booting a machine.
- VMs in the "guru meditation" state can be destroyed now using
`vagrant destroy`.
- Fix issue where changing SSH key permissions didn't properly work. [GH-911]
- Fix issue where Vagrant didn't properly detect VBoxManage on Windows
if VBOX_INSTALL_PATH contained multiple paths. [GH-885]
- Fix typo in setting host name for Gentoo guests. [GH-931]
- Files that are included with `vagrant package --include` now properly
preserve file attributes on earlier versions of Ruby. [GH-951]
- Multiple interfaces now work with Arch linux guests. [GH-957]
- Fix issue where subprocess execution would always spin CPU of Ruby
process to 100%. [GH-832]
- Fix issue where shell provisioner would sometimes never end. [GH-968]
- Fix issue where puppet would reorder module paths. [GH-964]
- When console input is asked for (destroying a VM, bridged interfaces, etc.),
keystrokes such as ctrl-D and ctrl-C are more gracefully handled. [GH-1017]
- Fixed bug where port check would use "localhost" on systems where
"localhost" is not available. [GH-1057]
- Add missing translation for "saving" state on VirtualBox. [GH-1110]
- Proper error message if the remote end unexpectedly resets the connection
while downloading a box over HTTP. [GH-1090]
- Human-friendly error is raised if there are permission issues when
using SCP to upload files. [GH-924]
- Box adding doesn't use `/tmp` anymore which can avoid some cross-device
copy issues. [GH-1199]
- Vagrant works properly in folders with strange characters. [GH-1223]
- Vagrant properly handles "paused" VirtualBox machines. [GH-1184]
- Better behavior around permissions issues when copying insecure
private key. [GH-580]
## 1.0.7 (March 13, 2013)
- Detect if a newer version of Vagrant ran and error if it did,
because we're not forward-compatible.
- Check for guest additions version AFTER booting. [GH-1179]
- Quote IdentityFile in `ssh-config` so private keys with spaces in
the path work. [GH-1322]
- Fix issue where multiple Puppet module paths can be re-ordered [GH-964]
- Shell provisioner won't hang on Windows anymore due to unclosed
tempfile. [GH-1040]
- Retry setting default VM name, since it sometimes fails first time. [GH-1368]
- Support setting hostname on Suse [GH-1063]
## 1.0.6 (December 21, 2012)
- Shell provisioner outputs proper line endings on Windows [GH-1164]
- SSH upload opens file to stream which fixes strange upload issues.
- Check for proper exit codes for Puppet, since multiple exit codes
can mean success. [GH-1180]
- Fix issue where DNS doesn't resolve properly for 12.10. [GH-1176]
- Allow hostname to be a substring of the box name for Ubuntu [GH-1163]
- Use `puppet agent` instead of `puppetd` to be Puppet 3.x
compatible. [GH-1169]
- Work around bug in VirtualBox exposed by bug in OS X 10.8 where
VirtualBox executables couldn't handle garbage being injected into
stdout by OS X.
## 1.0.5 (September 18, 2012)
- Work around a critical bug in VirtualBox 4.2.0 on Windows that
causes Vagrant to not work. [GH-1130]
- Plugin loading works better on Windows by using the proper
file path separator.
- NFS works on Fedora 16+. [GH-1140]
- NFS works with newer versions of Arch hosts that use systemd. [GH-1142]
## 1.0.4 (September 13, 2012)
- VirtualBox 4.2 driver. [GH-1120]
- Correct `ssh-config` help to use `--host`, not `-h`.
- Use "127.0.0.1" instead of "localhost" for port checking to fix problem
where "localhost" is not properly setup. [GH-1057]
- Disable read timeout on Net::HTTP to avoid `rbuf_fill` error. [GH-1072]
- Retry SSH on `EHOSTUNREACH` errors.
- Add missing translation for "saving" state. [GH-1110]
## 1.0.3 (May 1, 2012)
- Don't enable NAT DNS proxy on machines where resolv.conf already points
to localhost. This allows Vagrant to work once again with Ubuntu
12.04. [GH-909]
## 1.0.2 (March 25, 2012)
- Provisioners will still mount folders and such if `--no-provision` is
used, so that `vagrant provision` works. [GH-803]
- Nicer error message if an unsupported SSH key type is used. [GH-805]
- Gentoo guests can now have their host names changed. [GH-796]
- Relative paths can be used for the `config.ssh.private_key_path`
setting. [GH-808]
- `vagrant ssh` now works on Solaris, where `IdentitiesOnly` was not
an available option. [GH-820]
- Output works properly in the face of broken pipes. [GH-819]
- Enable Host IO Cache on the SATA controller by default.
- Chef-solo provisioner now supports encrypted data bags. [GH-816]
- Enable the NAT DNS proxy by default, allowing your DNS to continue
working when you switch networks. [GH-834]
- Checking for port forwarding collisions also checks for other applications
that are potentially listening on that port as well. [GH-821]
- Multiple VM names can be specified for the various commands now. For
example: `vagrant up web db service`. [GH-795]
- More robust error handling if a VM fails to boot. The error message
is much clearer now. [GH-825]
## 1.0.1 (March 11, 2012)
- Installers are now bundled with Ruby 1.9.3p125. Previously they were
bundled with 1.9.3p0. This actually fixes some IO issues with Windows.
- Windows installer now outputs a `vagrant` binary that will work in msys
or Cygwin environments.
- Fix crashing issue which manifested itself in multi-VM environments.
- Add missing `rubygems` require in `environment.rb` to avoid
possible load errors. [GH-781]
- `vagrant destroy` shows a nice error when called without a
TTY (and hence can't confirm). [GH-779]
- Fix an issue with the `:vagrantfile_name` option to `Vagrant::Environment`
not working properly. [GH-778]
- `VAGRANT_CWD` environmental variable can be used to set the CWD to
something other than the current directory.
- Downloading boxes from servers that don't send a content-length
now works properly. [GH-788]
- The `:facter` option now works for puppet server. [GH-790]
- The `--no-provision` and `--provision-with` flags are available to
`vagrant reload` now.
- `:openbsd` guest which supports only halting at the moment. [GH-773]
- `ssh-config -h` now shows help, instead of assuming a host is being
specified. For host, you can still use `--host`. [GH-793]
## 1.0.0 (March 6, 2012)
- `vagrant gem` should now be used to install Vagrant plugins that are
gems. This installs the gems to a private gem folder that Vagrant adds
to its own load path. This isolates Vagrant-related gems from system
gems.
- Plugin loading no longer happens right when Vagrant is loaded, but when
a Vagrant environment is loaded. I don't anticipate this causing any
problems but it is a backwards incompatible change should a plugin
depend on this (but I don't see any reason why they would).
- `vagrant destroy` now asks for confirmation by default. This can be
overridden with the `--force` flag. [GH-699]
- Fix issue with Puppet config inheritance. [GH-722]
- Fix issue where starting a VM on some systems was incorrectly treated
as failing. [GH-720]
- It is now an error to specify the packaging `output` as a directory. [GH-730]
- Unix-style line endings are used properly for guest OS. [GH-727]
- Retry certain VirtualBox operations, since they intermittently fail.
[GH-726]
- Fix issue where Vagrant would sometimes "lose" a VM if an exception
occurred. [GH-725]
- `vagrant destroy` destroys virtual machines in reverse order. [GH-739]
- Add an `fsid` option to Linux NFS exports. [GH-736]
- Fix edge case where an exception could be raised in networking code. [GH-742]
- Add missing translation for the "guru meditation" state. [GH-745]
- Check that VirtualBox exists before certain commands. [GH-746]
- NIC type can be defined for host-only network adapters. [GH-750]
- Fix issue where re-running chef-client would sometimes cause
problems due to file permissions. [GH-748]
- FreeBSD guests can now have their hostnames changed. [GH-757]
- FreeBSD guests now support host only networking and bridged networking. [GH-762]
- `VM#run_action` is now public so plugin-devs can hook into it.
- Fix crashing bug when attempting to run commands on the "primary"
VM in a multi-VM environment. [GH-761]
- With puppet you can now specify `:facter` as a dictionary of facts to
override what is generated by Puppet. [GH-753]
- Automatically convert all arguments to `customize` to strings.
- openSUSE host system. [GH-766]
- Fix subprocess IO deadlock which would occur on Windows. [GH-765]
- Fedora 16 guest support. [GH-772]
## 0.9.7 (February 9, 2012)
- Fix regression where all subprocess IO simply didn't work with
Windows. [GH-721]
## 0.9.6 (February 7, 2012)
- Fix strange issue with inconsistent childprocess reads on JRuby. [GH-711]
- `vagrant ssh` does a direct `exec()` syscall now instead of going through
the shell. This makes it so things like shell expansion oddities no longer
cause problems. [GH-715]
- Fix crashing case if there are no ports to forward.
- Fix issue surrounding improper configuration of host only networks on
RedHat guests. [GH-719]
- NFS should work properly on Gentoo. [GH-706]
## 0.9.5 (February 5, 2012)
- Fix crashing case when all network options are `:auto_config false`.
[GH-689]
- Type of network adapter can be specified with `:nic_type`. [GH-690]
- The NFS version can be specified with the `:nfs_version` option
on shared folders. [GH-557]
- Greatly improved FreeBSD guest and host support. [GH-695]
- Fix instability with RedHat guests and host only and bridged networks.
[GH-698]
- When using bridged networking, only list the network interfaces
that are up as choices. [GH-701]
- More intelligent handling of the `certname` option for puppet
server. [GH-702]
- You may now explicitly set the network to bridge to in the Vagrantfile
using the `:bridge` parameter. [GH-655]
## 0.9.4 (January 28, 2012)
- Important internal changes to middlewares that make plugin developer's
lives much easier. [GH-684]
- Match VM names that have parens, brackets, etc.
- Detect when the VirtualBox kernel module is not loaded and error. [GH-677]
- Set `:auto_config` to false on any networking option to not automatically
configure it on the guest. [GH-663]
- NFS shared folder guest paths can now contain shell expansion characters
such as `~`.
- NFS shared folders with a `:create` flag will have their host folders
properly created if they don't exist. [GH-667]
- Fix the precedence for Arch, Ubuntu, and FreeBSD host classes so
they are properly detected. [GH-683]
- Fix issue where VM import sometimes made strange VirtualBox folder
layouts. [GH-669]
- Call proper `id` command on Solaris. [GH-679]
- More accurate VBoxManage error detection.
- Shared folders can now be marked as transient using the `:transient`
flag. [GH-688]
## 0.9.3 (January 24, 2012)
- Proper error handling for not enough arguments to `box` commands.
- Fix issue causing crashes with bridged networking. [GH-673]
- Ignore host only network interfaces that are "down." [GH-675]
- Use "printf" instead of "echo" to determine shell expanded files paths
which is more generally POSIX compliant. [GH-676]
## 0.9.2 (January 20, 2012)
- Support shell expansions in shared folder guest paths again. [GH-656]
- Fix issue where Chef solo always expected the host to have a
"cookbooks" folder in their directory. [GH-638]
- Fix `forward_agent` not working when outside of blocks. [GH-651]
- Fix issue causing custom guest implementations to not load properly.
- Filter clear screen character out of output on SSH.
- Log output now goes on `stderr`, since it is utility information.
- Get rid of case where a `NoMethodError` could be raised while
determining VirtualBox version. [GH-658]
- Debian/Ubuntu uses `ifdown` again, instead of `ifconfig xxx down`, since
the behavior seems different/wrong.
- Give a nice error if `:vagrant` is used as a JSON key, since Vagrant
uses this. [GH-661]
- If there is only one bridgable interface, use that without asking
the user. [GH-655]
- The shell will have color output if ANSICON is installed on Windows. [GH-666]
## 0.9.1 (January 18, 2012)
- Use `ifconfig device down` instead of `ifdown`. [GH-649]
- Clearer invalid log level error. [GH-645]
- Fix exception raised with NFS `recover` method.
- Fix `ui` `NoMethodError` exception in puppet server.
- Fix `vagrant box help` on Ruby 1.8.7. [GH-647]
## 0.9.0 (January 17, 2012)
- VirtualBox 4.0 support backported in addition to supporting VirtualBox 4.1.
- `config.vm.network` syntax changed so that the first argument is now the type
of argument. Previously where you had `config.vm.network "33.33.33.10"` you
should now put `config.vm.network :hostonly, "33.33.33.10"`. This is in order
to support bridged networking, as well.
- `config.vm.forward_port` no longer requires a name parameter.
- Bridged networking. `config.vm.network` with `:bridged` as the option will
setup a bridged network.
- Host only networks can be configured with DHCP now. Specify `:dhcp` as
the IP and it will be done.
- `config.vm.customize` now takes a command to send to `VBoxManage`, so any
arbitrary command can be sent. The older style of passing a block no longer
works and Vagrant will give a proper error message if it notices this old-style
being used.
- `config.ssh.forwarded_port_key` is gone. Vagrant no longer cares about
forwarded port names for any reason. Please use `config.ssh.guest_port`
(more below).
- `config.ssh.forwarded_port_destination` has been replaced by
`config.ssh.guest_port` which more accurately reflects what it is
used for. Vagrant will automatically scan forwarded ports that match the
guest port to find the SSH port.
- Logging. The entire Vagrant source has had logging sprinkled throughout
to make debugging issues easier. To enable logging, set the VAGRANT_LOG
environmental variable to the log level you wish to see. By default,
logging is silent.
- `system` renamed to `guest` throughout the source. Any `config.vm.system`
configurations must be changed to `config.vm.guest`
- Puppet provisioner no longer defaults manifest to "box.pp." Instead, it
is now "default.pp"
- All Vagrant commands that take a VM name in a Multi-VM environment
can now be given a regular expression. If the name starts and ends with a "/"
then it is assumed to be a regular expression. [GH-573]
- Added a "--plain" flag to `vagrant ssh` which will cause Vagrant to not
perform any authentication. It will simply `ssh` into the proper IP and
port of the virtual machine.
- If a shared folder now has a `:create` flag set to `true`, the path on the
host will be created if it doesn't exist.
- Added `--force` flag to `box add`, which will overwite any existing boxes
if they exist. [GH-631]
- Added `--provision-with` to `up` which configures what provisioners run,
by shortcut. [GH-367]
- Arbitrary mount options can be passed with `:extra` to any shared
folders. [GH-551]
- Options passed after a `--` to `vagrant ssh` are now passed directly to
`ssh`. [GH-554]
- Ubuntu guests will now emit a `vagrant-mounted` upstart event after shared
folders are mounted.
- `attempts` is a new option on chef client and chef solo provisioners. This
will run the provisioner multiple times until erroring about failing
convergence. [GH-282]
- Removed Thor as a dependency for the command line interfaces. This resulted
in general speed increases across all command line commands.
- Linux uses `shutdown -h` instead of `halt` to hopefully more consistently
power off the system. [GH-575]
- Tweaks to SSH to hopefully be more reliable in coming up.
- Helpful error message when SCP is unavailable in the guest. [GH-568]
- Error message for improperly packaged box files. [GH-198]
- Copy insecure private key to user-owned directory so even
`sudo` installed Vagrant installations work. [GH-580]
- Provisioner stdout/stderr is now color coded based on stdout/stderr.
stdout is green, stderr is red. [GH-595]
- Chef solo now prompts users to run a `reload` if shared folders
are not found on the VM. [GH-253]
- "--no-provision" once again works for certain commands. [GH-591]
- Resuming a VM from a saved state will show an error message if there
would be port collisions. [GH-602]
- `vagrant ssh -c` will now exit with the same exit code as the command
run. [GH-598]
- `vagrant ssh -c` will now send stderr to stderr and stdout to stdout
on the host machine, instead of all output to stdout.
- `vagrant box add` path now accepts unexpanded shell paths such as
`~/foo` and will properly expand them. [GH-633]
- Vagrant can now be interrupted during the "importing" step.
- NFS exports will no longer be cleared when an expected error occurs. [GH-577]
## 0.8.10 (December 10, 2011)
- Revert the SSH tweaks made in 0.8.8. It affected stability
## 0.8.8 (December 1, 2011)
- Mount shared folders shortest to longest to avoid mounting
subfolders first. [GH-525]
- Support for basic HTTP auth in the URL for boxes.
- Solaris support for host only networks. [GH-533]
- `vagrant init` respects `Vagrant::Environment` cwd. [GH-528]
- `vagrant` commands will not output color when stdout is
not a TTY.
- Fix issue where `box_url` set with multiple VMs could cause issues. [GH-564]
- Chef provisioners no longer depend on a "v-root" share being
available. [GH-556]
- NFS should work for FreeBSD hosts now. [GH-510]
- SSH executed methods respect `config.ssh.max_tries`. [GH-508]
- `vagrant box add` now respects the "no_proxy" environmental variable.
[GH-502]
- Tweaks that should make "Waiting for VM to boot" slightly more
reliable.
- Add comments to Vagrantfile to make it detected as Ruby file for
`vi` and `emacs`. [GH-515]
- More correct guest addition version checking. [GH-514]
- Chef solo support on Windows is improved. [GH-542]
- Put encrypted data bag secret into `/tmp` by default so that
permissions are almost certainly guaranteed. [GH-512]
## 0.8.7 (September 13, 2011)
- Fix regression with remote paths from chef-solo. [GH-431]
- Fix issue where Vagrant crashes if `.vagrant` file becomes invalid. [GH-496]
- Issue a warning instead of an error for attempting to forward a port
<= 1024. [GH-487]
## 0.8.6 (August 28, 2011)
- Fix issue with download progress not properly clearing the line. [GH-476]
- NFS should work properly on Fedora. [GH-450]
- Arguments can be specified to the `shell` provisioner via the `args` option. [GH-475]
- Vagrant behaves much better when there are "inaccessible" VMs. [GH-453]
## 0.8.5 (August 15, 2011)
Note: 0.8.3 and 0.8.4 was yanked due to RubyGems encoding issue.
- Fix SSH `exec!` to inherit proper `$PATH`. [GH-426]
- Chef client now accepts an empty (`nil`) run list again. [GH-429]
- Fix incorrect error message when running `provision` on halted VM. [GH-447]
- Checking guest addition versions now ignores OSE. [GH-438]
- Chef solo from a remote URL fixed. [GH-431]
- Arch linux support: host only networks and changing the host name. [GH-439] [GH-448]
- Chef solo `roles_path` and `data_bags_path` can only be be single paths. [GH-446]
- Fix `virtualbox_not_detected` error message to require 4.1.x. [GH-458]
- Add shortname (`hostname -s`) for hostname setting on RHEL systems. [GH-456]
- `vagrant ssh -c` output no longer has a prefix and respects newlines
from the output. [GH-462]
## 0.8.2 (July 22, 2011)
- Fix issue with SSH disconnects not reconnecting.
- Fix chef solo simply not working with roles/data bags. [GH-425]
- Multiple chef solo provisioners now work together.
- Update Puppet provisioner so no deprecation warning is shown. [GH-421]
- Removed error on "provisioner=" in config, as this has not existed
for some time now.
- Add better validation for networking.
## 0.8.1 (July 20, 2011)
- Repush of 0.8.0 to fix a Ruby 1.9.2 RubyGems issue.
## 0.8.0 (July 20, 2011)
- VirtualBox 4.1 support _only_. Previous versions of VirtualBox
are supported by earlier versions of Vagrant.
- Performance optimizations in `virtualbox` gem. Huge speed gains.
- `:chef_server` provisioner is now `:chef_client`. [GH-359]
- SSH connection is now cached after first access internally,
speeding up `vagrant up`, `reload`, etc. quite a bit.
- Actions which modify the VM now occur much more quickly,
greatly speeding up `vagrant up`, `reload`, etc.
- SUSE host only networking support. [GH-369]
- Show nice error message for invalid HTTP responses for HTTP
downloader. [GH-403]
- New `:inline` option for shell provisioner to provide inline
scripts as a string. [GH-395]
- Host only network now properly works on multiple adapters. [GH-365]
- Can now specify owner/group for regular shared folders. [GH-350]
- `ssh_config` host name will use VM name if given. [GH-332]
- `ssh` `-e` flag changed to `-c` to align with `ssh` standard
behavior. [GH-323]
- Forward agent and forward X11 settings properly appear in
`ssh_config` output. [GH-105]
- Chef JSON can now be set with `chef.json =` instead of the old
`merge` technique. [GH-314]
- Provisioner configuration is no longer cleared when the box
needs to be downloaded during an `up`. [GH-308]
- Multiple Chef provisioners no longer overwrite cookbook folders. [GH-407]
- `package` won't delete previously existing file. [GH-408]
- Vagrantfile can be lowercase now. [GH-399]
- Only one copy of Vagrant may be running at any given time. [GH-364]
- Default home directory for Vagrant moved to `~/.vagrant.d` [GH-333]
- Specify a `forwarded_port_destination` for SSH configuration and
SSH port searching will fall back to that if it can't find any
other port. [GH-375]
## 0.7.8 (July 19, 2011)
- Make sure VirtualBox version check verifies that it is 4.0.x.
## 0.7.7 (July 12, 2011)
- Fix crashing bug with Psych and Ruby 1.9.2. [GH-411]
## 0.7.6 (July 2, 2011)
- Run Chef commands in a single command. [GH-390]
- Add `nfs` option for Chef to mount Chef folders via NFS. [GH-378]
- Add translation for `aborted` state in VM. [GH-371]
- Use full paths with the Chef provisioner so that restart cookbook will
work. [GH-374]
- Add "--no-color" as an argument and no colorized output will be used. [GH-379]
- Added DEVICE option to the RedHat host only networking entry, which allows
host only networking to work even if the VM has multiple NICs. [GH-382]
- Touch the network configuration file for RedHat so that the `sed` works
with host only networking. [GH-381]
- Load prerelease versions of plugins if available.
- Do not load a plugin if it depends on an invalid version of Vagrant.
- Encrypted data bag support in Chef server provisioner. [GH-398]
- Use the `-H` flag to set the proper home directory for `sudo`. [GH-370]
## 0.7.5 (May 16, 2011)
- `config.ssh.port` can be specified and takes highest precedence if specified.
Otherwise, Vagrant will still attempt to auto-detect the port. [GH-363]
- Get rid of RubyGems deprecations introduced with RubyGems 1.8.x
- Search in pre-release gems for plugins as well as release gems.
- Support for Chef-solo `data_bags_path` [GH-362]
- Can specify path to Chef binary using `binary_path` [GH-342]
- Can specify additional environment data for Chef using `binary_env` [GH-342]
## 0.7.4 (May 12, 2011)
- Chef environments support (for Chef 0.10) [GH-358]
- Suppress the "added to known hosts" message for SSH [GH-354]
- Ruby 1.8.6 support [GH-352]
- Chef proxy settings now work for chef server [GH-335]
## 0.7.3 (April 19, 2011)
- Retry all SSH on Net::SSH::Disconnect in case SSH is just restarting. [GH-313]
- Add NFS shared folder support for Arch linux. [GH-346]
- Fix issue with unknown terminal type output for sudo commands.
- Forwarded port protocol can now be set as UDP. [GH-311]
- Chef server file cache path and file backup path can be configured. [GH-310]
- Setting hostname should work on Debian now. [GH-307]
## 0.7.2 (February 8, 2011)
- Update JSON dependency to 1.5.1, which works with Ruby 1.9 on
Windows.
- Fix sudo issues on sudo < 1.7.0 (again).
- Fix race condition in SSH, which specifically manifested itself in
the chef server provisioner. [GH-295]
- Change sudo shell to use `bash` (configurable). [GH-301]
- Can now set mac address of host only network. [GH-294]
- NFS shared folders with spaces now work properly. [GH-293]
- Failed SSH commands now show output in error message. [GH-285]
## 0.7.1 (January 28, 2011)
- Change error output with references to VirtualBox 3.2 to 4.0.
- Internal SSH through net-ssh now uses `IdentitiesOnly` thanks to
upstream net-ssh fix.
- Fix issue causing warnings to show with `forwardx11` enabled for SSH. [GH-279]
- FreeBSD support for host only networks, NFS, halting, etc. [GH-275]
- Make SSH commands which use sudo compatible with sudo < 1.7.0. [GH-278]
- Fix broken puppet server provisioner which called a nonexistent
method.
- Default SSH host changed from `localhost` to `127.0.0.1` since
`localhost` is not always loopback.
- New `shell` provisioner which simply uploads and executes a script as
root on the VM.
- Gentoo host only networking no longer fails if alrady setup. [GH-286]
- Set the host name of your guest OS with `config.vm.host_name` [GH-273]
- `vagrant ssh-config` now outputs the configured `config.ssh.host`
## 0.7.0 (January 19, 2011)
- VirtualBox 4.0 support. Support for VirtualBox 3.2 is _dropped_, since
the API is so different. Stay with the 0.6.x series if you have VirtualBox
3.2.x.
- Puppet server provisioner. [GH-262]
- Use numeric uid/gid in mounting shared folders to increase portability. [GH-252]
- HTTP downloading follows redirects. [GH-163]
- Downloaders have clearer output to note what they're doing.
- Shared folders with no guest path are not automounted. [GH-184]
- Boxes downloaded during `vagrant up` reload the Vagrantfile config, which
fixes a problem with box settings not being properly loaded. [GH-231]
- `config.ssh.forward_x11` to enable the ForwardX11 SSH option. [GH-255]
- Vagrant source now has a `contrib` directory where contributions of miscellaneous
addons for Vagrant will be added.
- Vagrantfiles are now loaded only once (instead of 4+ times) [GH-238]
- Ability to move home vagrant dir (~/.vagrant) by setting VAGRANT_HOME
environmental variable.
- Removed check and error for the "OSE" version of VirtualBox, since with
VirtualBox 4 this distinction no longer exists.
- Ability to specify proxy settings for chef. [GH-169]
- Helpful error message shown if NFS mounting fails. [GH-135]
- Gentoo guests now support host only networks. [GH-240]
- RedHat (CentOS included) guests now support host only networks. [GH-260]
- New Vagrantfile syntax for enabling and configuring provisioners. This
change is not backwards compatible. [GH-265]
- Provisioners are now RVM-friendly, meaning if you installed chef or puppet
with an RVM managed Ruby, Vagrant now finds then. [GH-254]
- Changed the unused host only network destroy mechanism to check for
uselessness after the VM is destroyed. This should result in more accurate
checks.
- Networks are no longer disabled upon halt/destroy. With the above
change, its unnecessary.
- Puppet supports `module_path` configuration to mount local modules directory
as a shared folder and configure puppet with it. [GH-270]
- `ssh-config` now outputs `127.0.0.1` as the host instead of `localhost`.
## 0.6.9 (December 21, 2010)
- Puppet provisioner. [GH-223]
- Solaris system configurable to use `sudo`.
- Solaris system registered, so it can be set with `:solaris`.
- `vagrant package` include can be a directory name, which will cause the
contents to be recursively copied into the package. [GH-241]
- Arbitrary options to puppet binary can be set with `config.puppet.options`. [GH-242]
- BSD hosts use proper GNU sed syntax for clearing NFS shares. [GH-243]
- Enumerate VMs in a multi-VM environment in order they were defined. [GH-244]
- Check for VM boot changed to use `timeout` library, which works better with Windows.
- Show special error if VirtualBox not detected on 64-bit Windows.
- Show error to Windows users attempting to use host only networking since
it doesn't work yet.
## 0.6.8 (November 30, 2010)
- Network interfaces are now up/down in distinct commands instead of just
restarting "networking." [GH-192]
- Add missing translation for chef binary missing. [GH-203]
- Fix default settings for Opscode platform and comments. [GH-213]
- Blank client name for chef server now uses FQDN by default, instead of "client" [GH-214]
- Run list can now be nil, which will cause it to sync with chef server (when
chef server is enabled). [GH-214]
- Multiple NFS folders now work on linux. [GH-215]
- Add translation for state "stuck" which is very rare. [GH-218]
- virtualbox gem dependency minimum raised to 0.7.6 to verify FFI < 1.0.0 is used.
- Fix issue where box downloading from `vagrant up` didn't reload the box collection. [GH-229]
## 0.6.7 (November 3, 2010)
- Added validation to verify that a box is specified.
- Proper error message when box is not found for `config.vm.box`. [GH-195]
- Fix output of `vagrant status` with multi-vm to be correct. [GH-196]
## 0.6.6 (October 14, 2010)
- `vagrant status NAME` works once again. [GH-191]
- Conditional validation of Vagrantfile so that some commands don't validate. [GH-188]
- Fix "junk" output for ssh-config. [GH-189]
- Fix port collision handling with greater than two VMs. [GH-185]
- Fix potential infinite loop with root path if bad CWD is given to environment.
## 0.6.5 (October 8, 2010)
- Validations on base MAC address to avoid situation described in GH-166, GH-181
from ever happening again.
- Properly load sub-VM configuration on first-pass of config loading. Solves
a LOT of problems with multi-VM. [GH-166] [GH-181]
- Configuration now only validates on final Vagrantfile proc, so multi-VM
validates correctly.
- A nice error message is given if ".vagrant" is a directory and therefore
can't be accessed. [GH-172]
- Fix plugin loading in a Rails 2.3.x project. [GH-176]
## 0.6.4 (October 4, 2010)
- Default VM name is now properly the parent folder of the working directory
of the environment.
- Added method to `TestHelpers` to assist with testing new downloaders.
- `up --no-provision` works again. This disables provisioning during the
boot process.
- Action warden doesn't do recovery process on `SystemExit` exceptions,
allowing the double ctrl-C to work properly again. [related to GH-166]
- Initial Vagrantfile is now heavily commented with various available
options. [GH-171]
- Box add checks if a box already exists before the download. [GH-170]
- NFS no longer attempts to clean exports file if VM is not created,
which was causing a stack trace during recovery. [related to GH-166]
- Basic validation added for Chef configuration (both solo and server).
- Top config class is now available in all `Vagrant::Config::Base`
subclasses, which is useful for config validation.
- Subcommand help shows proper full command in task listing. [GH-168]
- SSH gives error message if `ssh` binary is not found. [GH-161]
- SSH gives proper error message if VM is not running. [GH-167]
- Fix some issues with undefined constants in command errors.
## 0.6.1, 0.6.2, 0.6.3 (September 27, 2010)
A lot of quick releases which all were to fix issues with Ruby 1.8.7
compatibility.
## 0.6.0 (September 27, 2010)
- VM name now defaults to the name of the containing folder, plus a timestamp.
This should make it easier to identify VMs in the VirtualBox GUI.
- Exposed Vagrant test helpers in `Vagrant::TestHelpers` for plugins to easily
test themselves against Vagrant environments.
- **Plugins** have landed. Plugins are simply gems which have a `vagrant_init.rb`
file somewhere in their load path. Please read the documentation on
vagrantup.com before attempting to create a plugin (which is very easy)
for more information on how it all works and also some guidelines.
- `vagrant package` now takes a `--vagrantfile` option to specify a
Vagrantfile to package. The `--include` approach for including a Vagrantfile
no longer works (previously built boxes will continue to work).
- `vagrant package` has new logic with regards to the `--include` option
depending on if the file path is relative or absolute (they can be
intermixed):
* _Relative_ paths are copied directly into the box, preserving
their path. So `--include lib/foo` would be in the box as "lib/foo"
* _Absolute_ paths are simply copied files into the root of the
box. So `--include /lib/foo` would be in the box as "foo"
- "vagrant_main" is no longer the default run list. Instead, chef
run list starts empty. It is up to you to specify all recipes in
the Vagrantfile now.
- Fixed various issues with certain action middleware not working if
the VM was not created.
- SSH connection is retried 5 times if there is a connection refused.
Related to GH-140.
- If `http_proxy` environmental variable is set, it will be used as the proxy
box adding via http.
- Remove `config.ssh.password`. It hasn't been used for a few versions
now and was only kept around to avoid exceptions in Vagrantfiles.
- Configuration is now validated so improper input can be found in
Vagrantfiles.
- Fixed issue with not detecting Vagrantfile at root directory ("/").
- Vagrant now gives a nice error message if there is a syntax error
in any Vagrantfile. [GH-154]
- The format of the ".vagrant" file which stores persisted VMs has
changed. This is **backwards incompatible**. Will provide an upgrade
utility prior to 0.6 launch.
- Every [expected] Vagrant error now exits with a clean error message
and a unique exit status, and raises a unique exception (if you're
scripting Vagrant).
- Added I18n gem dependency for pulling strings into clean YML files.
Vagrant is now localizable as a side effect! Translations welcome.
- Fixed issue with "Waiting for cleanup" message appearing twice in
some cases. [GH-145]
- Converted CLI to use Thor. As a tradeoff, there are some backwards
incompatibilities:
* `vagrant package` - The `--include` flag now separates filenames
by spaces, instead of by commas. e.g. `vagrant package --include x y z`
* `vagrant ssh` - If you specify a command to execute using the `--execute`
flag, you may now only specify one command (before you were able to
specify an arbitrary amount). e.g. `vagrant ssh -e "echo hello"`
* `vagrant ssh-config` has become `vagrant ssh_config` due to a limitation
in Thor.
## 0.5.4 (September 7, 2010)
- Fix issue with the "exec failed" by running on Tiger as well.
- Give an error when downloading a box which already exists prior
to actually downloading the box.
## 0.5.3 (August 23, 2010)
- Add erubis as a dependency since its rendering of `erb` is sane.
- Fixed poorly formatted Vagrantfile after `vagrant init`. [GH-142]
- Fixed NFS not working properly with multiple NFS folders.
- Fixed chef solo provision to work on Windows. It was expanding a linux
path which prepended a drive letter onto it.
## 0.5.2 (August 3, 2010)
- `vagrant up` can be used as a way to resume the VM as well (same as
`vagrant resume`). [GH-134]
- Sudo uses "-E" flag to preserve environment for chef provisioners.
This fixes issues with CentOS. [GH-133]
- Added "IdentitiesOnly yes" to options when `vagrant ssh` is run to
avoid "Too Many Authentication Failures" error. [GH-131]
- Fix regression with `package` not working. [GH-132]
- Added ability to specify box url in `init`, which populates the
Vagrantfile with the proper `config.vm.box_url`.
## 0.5.1 (July 31, 2010)
- Allow specifying cookbook paths which exist only on the VM in `config.chef.cookbooks_path`.
This is used for specifying cookbook paths when `config.chef.recipe_url` is used. [GH-130]
See updated chef solo documentation for more information on this.
- No longer show "Disabling host only networks..." if no host only networks
are destroyed. Quiets `destroy`, `halt`, etc output a bit.
- Updated getting started guide to be more up to date and generic. [GH-125]
- Fixed error with doing a `vagrant up` when no Vagrantfile existed. [GH-128]
- Fixed NFS erroring when NFS wasn't even enabled if `/etc/exports` doesn't
exist. [GH-126]
- Fixed `vagrant resume` to properly resume a suspended VM. [GH-122]
- Fixed `halt`, `destroy`, `reload` to where they failed if the VM was
in a saved state. [GH-123]
- Added `config.chef.recipe_url` which allows you to specify a URL to
a gzipped tar file for chef solo to download cookbooks. See the
[chef-solo docs](http://wiki.opscode.com/display/chef/Chef+Solo#ChefSolo-RunningfromaURL) for more information.
[GH-121]
- Added `vagrant box repackage` which repackages boxes which have
been added. This is useful in case you want to redistribute a base
box you have but may have lost the actual "box" file. [GH-120]
## Previous
The changelog began with version 0.5.1 so any changes prior to that
can be seen by checking the tagged releases and reading git commit
messages.
Reference in New Issue View Git Blame Copy Permalink