vagrant/CHANGELOG.md at 4e547becab47cb3f4ca17d12e19c8de1ef3b4082

22 KiB

Raw Blame History

0.9.0 (unreleased)

config.vm.customize now takes a command to send to VBoxManage, so any arbitrary command can be sent. The older style of passing a block no longer works and Vagrant will give a proper error message if it notices this old-style being used.
Logging. The entire Vagrant source has had logging sprinkled throughout to make debugging issues easier. To enable logging, set the VAGRANT_LOG environmental variable to the log level you wish to see. By default, logging is silent.
system renamed to guest throughout the source. Any config.vm.system configurations must be changed to config.vm.guest
Removed Thor as a dependency for the command line interfaces. This resulted in general speed increases across all command line commands.
Linux uses shutdown -h instead of halt to hopefully more consistently power off the system. [GH-575]
Tweaks to SSH to hopefully be more reliable in coming up.
Helpful error message when SCP is unavailable in the guest. [GH-568]
Error message for improperly packaged box files. [GH-198]
Copy insecure private key to user-owned directory so even sudo installed Vagrant installations work. [GH-580]
Provisioner stdout/stderr is now color coded based on stdout/stderr. stdout is green, stderr is red. [GH-595]
"--no-provision" once again works for certain commands. [GH-591]
Resuming a VM from a saved state will show an error message if there would be port collisions. [GH-602]

0.8.10 (December 10, 2011)

Revert the SSH tweaks made in 0.8.8. It affected stability

0.8.8 (December 1, 2011)

Mount shared folders shortest to longest to avoid mounting subfolders first. [GH-525]
Support for basic HTTP auth in the URL for boxes.
Solaris support for host only networks. [GH-533]
vagrant init respects Vagrant::Environment cwd. [GH-528]
vagrant commands will not output color when stdout is not a TTY.
Fix issue where box_url set with multiple VMs could cause issues. [GH-564]
Chef provisioners no longer depend on a "v-root" share being available. [GH-556]
NFS should work for FreeBSD hosts now. [GH-510]
SSH executed methods respect config.ssh.max_tries. [GH-508]
vagrant box add now respects the "no_proxy" environmental variable. [GH-502]
Tweaks that should make "Waiting for VM to boot" slightly more reliable.
Add comments to Vagrantfile to make it detected as Ruby file for vi and emacs. [GH-515]
More correct guest addition version checking. [GH-514]
Chef solo support on Windows is improved. [GH-542]
Put encrypted data bag secret into /tmp by default so that permissions are almost certainly guaranteed. [GH-512]

0.8.7 (September 13, 2011)

Fix regression with remote paths from chef-solo. [GH-431]
Fix issue where Vagrant crashes if .vagrant file becomes invalid. [GH-496]
Issue a warning instead of an error for attempting to forward a port <= 1024. [GH-487]

0.8.6 (August 28, 2011)

Fix issue with download progress not properly clearing the line. [GH-476]
NFS should work properly on Fedora. [GH-450]
Arguments can be specified to the shell provisioner via the args option. [GH-475]
Vagrant behaves much better when there are "inaccessible" VMs. [GH-453]

0.8.5 (August 15, 2011)

Note: 0.8.3 and 0.8.4 was yanked due to RubyGems encoding issue.

Fix SSH exec! to inherit proper $PATH. [GH-426]
Chef client now accepts an empty (nil) run list again. [GH-429]
Fix incorrect error message when running provision on halted VM. [GH-447]
Checking guest addition versions now ignores OSE. [GH-438]
Chef solo from a remote URL fixed. [GH-431]
Arch linux support: host only networks and changing the host name. [GH-439] [GH-448]
Chef solo roles_path and data_bags_path can only be be single paths. [GH-446]
Fix virtualbox_not_detected error message to require 4.1.x. [GH-458]
Add shortname (hostname -s) for hostname setting on RHEL systems. [GH-456]
vagrant ssh -c output no longer has a prefix and respects newlines from the output. [GH-462]

0.8.2 (July 22, 2011)

Fix issue with SSH disconnects not reconnecting.
Fix chef solo simply not working with roles/data bags. [GH-425]
Multiple chef solo provisioners now work together.
Update Puppet provisioner so no deprecation warning is shown. [GH-421]
Removed error on "provisioner=" in config, as this has not existed for some time now.
Add better validation for networking.

0.8.1 (July 20, 2011)

Repush of 0.8.0 to fix a Ruby 1.9.2 RubyGems issue.

0.8.0 (July 20, 2011)

VirtualBox 4.1 support only. Previous versions of VirtualBox are supported by earlier versions of Vagrant.
Performance optimizations in virtualbox gem. Huge speed gains.
:chef_server provisioner is now :chef_client. [GH-359]
SSH connection is now cached after first access internally, speeding up vagrant up, reload, etc. quite a bit.
Actions which modify the VM now occur much more quickly, greatly speeding up vagrant up, reload, etc.
SUSE host only networking support. [GH-369]
Show nice error message for invalid HTTP responses for HTTP downloader. [GH-403]
New :inline option for shell provisioner to provide inline scripts as a string. [GH-395]
Host only network now properly works on multiple adapters. [GH-365]
Can now specify owner/group for regular shared folders. [GH-350]
ssh_config host name will use VM name if given. [GH-332]
ssh -e flag changed to -c to align with ssh standard behavior. [GH-323]
Forward agent and forward X11 settings properly appear in ssh_config output. [GH-105]
Chef JSON can now be set with chef.json = instead of the old merge technique. [GH-314]
Provisioner configuration is no longer cleared when the box needs to be downloaded during an up. [GH-308]
Multiple Chef provisioners no longer overwrite cookbook folders. [GH-407]
package won't delete previously existing file. [GH-408]
Vagrantfile can be lowercase now. [GH-399]
Only one copy of Vagrant may be running at any given time. [GH-364]
Default home directory for Vagrant moved to ~/.vagrant.d [GH-333]
Specify a forwarded_port_destination for SSH configuration and SSH port searching will fall back to that if it can't find any other port. [GH-375]

0.7.8 (July 19, 2011)

Make sure VirtualBox version check verifies that it is 4.0.x.

0.7.7 (July 12, 2011)

Fix crashing bug with Psych and Ruby 1.9.2. [GH-411]

0.7.6 (July 2, 2011)

Run Chef commands in a single command. [GH-390]
Add nfs option for Chef to mount Chef folders via NFS. [GH-378]
Add translation for aborted state in VM. [GH-371]
Use full paths with the Chef provisioner so that restart cookbook will work. [GH-374]
Add "--no-color" as an argument and no colorized output will be used. [GH-379]
Added DEVICE option to the RedHat host only networking entry, which allows host only networking to work even if the VM has multiple NICs. [GH-382]
Touch the network configuration file for RedHat so that the sed works with host only networking. [GH-381]
Load prerelease versions of plugins if available.
Do not load a plugin if it depends on an invalid version of Vagrant.
Encrypted data bag support in Chef server provisioner. [GH-398]
Use the -H flag to set the proper home directory for sudo. [GH-370]

0.7.5 (May 16, 2011)

config.ssh.port can be specified and takes highest precedence if specified. Otherwise, Vagrant will still attempt to auto-detect the port. [GH-363]
Get rid of RubyGems deprecations introduced with RubyGems 1.8.x
Search in pre-release gems for plugins as well as release gems.
Support for Chef-solo data_bags_path [GH-362]
Can specify path to Chef binary using binary_path [GH-342]
Can specify additional environment data for Chef using binary_env [GH-342]

0.7.4 (May 12, 2011)

Chef environments support (for Chef 0.10) [GH-358]
Suppress the "added to known hosts" message for SSH [GH-354]
Ruby 1.8.6 support [GH-352]
Chef proxy settings now work for chef server [GH-335]

0.7.3 (April 19, 2011)

Retry all SSH on Net::SSH::Disconnect in case SSH is just restarting. [GH-313]
Add NFS shared folder support for Arch linux. [GH-346]
Fix issue with unknown terminal type output for sudo commands.
Forwarded port protocol can now be set as UDP. [GH-311]
Chef server file cache path and file backup path can be configured. [GH-310]
Setting hostname should work on Debian now. [GH-307]

0.7.2 (February 8, 2011)

Update JSON dependency to 1.5.1, which works with Ruby 1.9 on Windows.
Fix sudo issues on sudo < 1.7.0 (again).
Fix race condition in SSH, which specifically manifested itself in the chef server provisioner. [GH-295]
Change sudo shell to use bash (configurable). [GH-301]
Can now set mac address of host only network. [GH-294]
NFS shared folders with spaces now work properly. [GH-293]
Failed SSH commands now show output in error message. [GH-285]

0.7.1 (January 28, 2011)

Change error output with references to VirtualBox 3.2 to 4.0.
Internal SSH through net-ssh now uses IdentitiesOnly thanks to upstream net-ssh fix.
Fix issue causing warnings to show with forwardx11 enabled for SSH. [GH-279]
FreeBSD support for host only networks, NFS, halting, etc. [GH-275]
Make SSH commands which use sudo compatible with sudo < 1.7.0. [GH-278]
Fix broken puppet server provisioner which called a nonexistent method.
Default SSH host changed from localhost to 127.0.0.1 since localhost is not always loopback.
New shell provisioner which simply uploads and executes a script as root on the VM.
Gentoo host only networking no longer fails if alrady setup. [GH-286]
Set the host name of your guest OS with config.vm.host_name [GH-273]
vagrant ssh-config now outputs the configured config.ssh.host

0.7.0 (January 19, 2011)

VirtualBox 4.0 support. Support for VirtualBox 3.2 is dropped, since the API is so different. Stay with the 0.6.x series if you have VirtualBox 3.2.x.
Puppet server provisioner. [GH-262]
Use numeric uid/gid in mounting shared folders to increase portability. [GH-252]
HTTP downloading follows redirects. [GH-163]
Downloaders have clearer output to note what they're doing.
Shared folders with no guest path are not automounted. [GH-184]
Boxes downloaded during vagrant up reload the Vagrantfile config, which fixes a problem with box settings not being properly loaded. [GH-231]
config.ssh.forward_x11 to enable the ForwardX11 SSH option. [GH-255]
Vagrant source now has a contrib directory where contributions of miscellaneous addons for Vagrant will be added.
Vagrantfiles are now loaded only once (instead of 4+ times) [GH-238]
Ability to move home vagrant dir (~/.vagrant) by setting VAGRANT_HOME environmental variable.
Removed check and error for the "OSE" version of VirtualBox, since with VirtualBox 4 this distinction no longer exists.
Ability to specify proxy settings for chef. [GH-169]
Helpful error message shown if NFS mounting fails. [GH-135]
Gentoo guests now support host only networks. [GH-240]
RedHat (CentOS included) guests now support host only networks. [GH-260]
New Vagrantfile syntax for enabling and configuring provisioners. This change is not backwards compatible. [GH-265]
Provisioners are now RVM-friendly, meaning if you installed chef or puppet with an RVM managed Ruby, Vagrant now finds then. [GH-254]
Changed the unused host only network destroy mechanism to check for uselessness after the VM is destroyed. This should result in more accurate checks.
Networks are no longer disabled upon halt/destroy. With the above change, its unnecessary.
Puppet supports module_path configuration to mount local modules directory as a shared folder and configure puppet with it. [GH-270]
ssh-config now outputs 127.0.0.1 as the host instead of localhost.

0.6.9 (December 21, 2010)

Puppet provisioner. [GH-223]
Solaris system configurable to use sudo.
Solaris system registered, so it can be set with :solaris.
vagrant package include can be a directory name, which will cause the contents to be recursively copied into the package. [GH-241]
Arbitrary options to puppet binary can be set with config.puppet.options. [GH-242]
BSD hosts use proper GNU sed syntax for clearing NFS shares. [GH-243]
Enumerate VMs in a multi-VM environment in order they were defined. [GH-244]
Check for VM boot changed to use timeout library, which works better with Windows.
Show special error if VirtualBox not detected on 64-bit Windows.
Show error to Windows users attempting to use host only networking since it doesn't work yet.

0.6.8 (November 30, 2010)

Network interfaces are now up/down in distinct commands instead of just restarting "networking." [GH-192]
Add missing translation for chef binary missing. [GH-203]
Fix default settings for Opscode platform and comments. [GH-213]
Blank client name for chef server now uses FQDN by default, instead of "client" [GH-214]
Run list can now be nil, which will cause it to sync with chef server (when chef server is enabled). [GH-214]
Multiple NFS folders now work on linux. [GH-215]
Add translation for state "stuck" which is very rare. [GH-218]
virtualbox gem dependency minimum raised to 0.7.6 to verify FFI < 1.0.0 is used.
Fix issue where box downloading from vagrant up didn't reload the box collection. [GH-229]

0.6.7 (November 3, 2010)

Added validation to verify that a box is specified.
Proper error message when box is not found for config.vm.box. [GH-195]
Fix output of vagrant status with multi-vm to be correct. [GH-196]

0.6.6 (October 14, 2010)

vagrant status NAME works once again. [GH-191]
Conditional validation of Vagrantfile so that some commands don't validate. [GH-188]
Fix "junk" output for ssh-config. [GH-189]
Fix port collision handling with greater than two VMs. [GH-185]
Fix potential infinite loop with root path if bad CWD is given to environment.

0.6.5 (October 8, 2010)

Validations on base MAC address to avoid situation described in GH-166, GH-181 from ever happening again.
Properly load sub-VM configuration on first-pass of config loading. Solves a LOT of problems with multi-VM. [GH-166] [GH-181]
Configuration now only validates on final Vagrantfile proc, so multi-VM validates correctly.
A nice error message is given if ".vagrant" is a directory and therefore can't be accessed. [GH-172]
Fix plugin loading in a Rails 2.3.x project. [GH-176]

0.6.4 (October 4, 2010)

Default VM name is now properly the parent folder of the working directory of the environment.
Added method to TestHelpers to assist with testing new downloaders.
up --no-provision works again. This disables provisioning during the boot process.
Action warden doesn't do recovery process on SystemExit exceptions, allowing the double ctrl-C to work properly again. [related to GH-166]
Initial Vagrantfile is now heavily commented with various available options. [GH-171]
Box add checks if a box already exists before the download. [GH-170]
NFS no longer attempts to clean exports file if VM is not created, which was causing a stack trace during recovery. [related to GH-166]
Basic validation added for Chef configuration (both solo and server).
Top config class is now available in all Vagrant::Config::Base subclasses, which is useful for config validation.
Subcommand help shows proper full command in task listing. [GH-168]
SSH gives error message if ssh binary is not found. [GH-161]
SSH gives proper error message if VM is not running. [GH-167]
Fix some issues with undefined constants in command errors.

0.6.1, 0.6.2, 0.6.3 (September 27, 2010)

A lot of quick releases which all were to fix issues with Ruby 1.8.7 compatibility.

0.6.0 (September 27, 2010)

VM name now defaults to the name of the containing folder, plus a timestamp. This should make it easier to identify VMs in the VirtualBox GUI.
Exposed Vagrant test helpers in Vagrant::TestHelpers for plugins to easily test themselves against Vagrant environments.
Plugins have landed. Plugins are simply gems which have a vagrant_init.rb file somewhere in their load path. Please read the documentation on vagrantup.com before attempting to create a plugin (which is very easy) for more information on how it all works and also some guidelines.
vagrant package now takes a --vagrantfile option to specify a Vagrantfile to package. The --include approach for including a Vagrantfile no longer works (previously built boxes will continue to work).
vagrant package has new logic with regards to the --include option depending on if the file path is relative or absolute (they can be intermixed):
- Relative paths are copied directly into the box, preserving their path. So --include lib/foo would be in the box as "lib/foo"
- Absolute paths are simply copied files into the root of the box. So --include /lib/foo would be in the box as "foo"
"vagrant_main" is no longer the default run list. Instead, chef run list starts empty. It is up to you to specify all recipes in the Vagrantfile now.
Fixed various issues with certain action middleware not working if the VM was not created.
SSH connection is retried 5 times if there is a connection refused. Related to GH-140.
If http_proxy environmental variable is set, it will be used as the proxy box adding via http.
Remove config.ssh.password. It hasn't been used for a few versions now and was only kept around to avoid exceptions in Vagrantfiles.
Configuration is now validated so improper input can be found in Vagrantfiles.
Fixed issue with not detecting Vagrantfile at root directory ("/").
Vagrant now gives a nice error message if there is a syntax error in any Vagrantfile. [GH-154]
The format of the ".vagrant" file which stores persisted VMs has changed. This is backwards incompatible. Will provide an upgrade utility prior to 0.6 launch.
Every [expected] Vagrant error now exits with a clean error message and a unique exit status, and raises a unique exception (if you're scripting Vagrant).
Added I18n gem dependency for pulling strings into clean YML files. Vagrant is now localizable as a side effect! Translations welcome.
Fixed issue with "Waiting for cleanup" message appearing twice in some cases. [GH-145]
Converted CLI to use Thor. As a tradeoff, there are some backwards incompatibilities:
- vagrant package - The --include flag now separates filenames by spaces, instead of by commas. e.g. vagrant package --include x y z
- vagrant ssh - If you specify a command to execute using the --execute flag, you may now only specify one command (before you were able to specify an arbitrary amount). e.g. vagrant ssh -e "echo hello"
- vagrant ssh-config has become vagrant ssh_config due to a limitation in Thor.

0.5.4 (September 7, 2010)

Fix issue with the "exec failed" by running on Tiger as well.
Give an error when downloading a box which already exists prior to actually downloading the box.

0.5.3 (August 23, 2010)

Add erubis as a dependency since its rendering of erb is sane.
Fixed poorly formatted Vagrantfile after vagrant init. [GH-142]
Fixed NFS not working properly with multiple NFS folders.
Fixed chef solo provision to work on Windows. It was expanding a linux path which prepended a drive letter onto it.

0.5.2 (August 3, 2010)

vagrant up can be used as a way to resume the VM as well (same as vagrant resume). [GH-134]
Sudo uses "-E" flag to preserve environment for chef provisioners. This fixes issues with CentOS. [GH-133]
Added "IdentitiesOnly yes" to options when vagrant ssh is run to avoid "Too Many Authentication Failures" error. [GH-131]
Fix regression with package not working. [GH-132]
Added ability to specify box url in init, which populates the Vagrantfile with the proper config.vm.box_url.

0.5.1 (July 31, 2010)

Allow specifying cookbook paths which exist only on the VM in config.chef.cookbooks_path. This is used for specifying cookbook paths when config.chef.recipe_url is used. [GH-130] See updated chef solo documentation for more information on this.
No longer show "Disabling host only networks..." if no host only networks are destroyed. Quiets destroy, halt, etc output a bit.
Updated getting started guide to be more up to date and generic. [GH-125]
Fixed error with doing a vagrant up when no Vagrantfile existed. [GH-128]
Fixed NFS erroring when NFS wasn't even enabled if /etc/exports doesn't exist. [GH-126]
Fixed vagrant resume to properly resume a suspended VM. [GH-122]
Fixed halt, destroy, reload to where they failed if the VM was in a saved state. [GH-123]
Added config.chef.recipe_url which allows you to specify a URL to a gzipped tar file for chef solo to download cookbooks. See the chef-solo docs for more information. [GH-121]
Added vagrant box repackage which repackages boxes which have been added. This is useful in case you want to redistribute a base box you have but may have lost the actual "box" file. [GH-120]

The changelog began with version 0.5.1 so any changes prior to that can be seen by checking the tagged releases and reading git commit messages.

22 KiB Raw Blame History