sys64738
/
blackmagic
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

native: Done a spring pass in platform_init() with clang-format and removed a duplicate gpio_set_mode() call

This commit is contained in:
dragonmux 2022-08-09 00:10:18 +01:00 committed by Piotr Esden-Tempski
parent 7a0f6597ff
commit 52160db72b
1 changed files with 19 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
src/platforms/native/platform.c
View File

@ -156,17 +156,11 @@ void platform_init(void)
/* Setup GPIO ports */
gpio_clear(USB_PU_PORT, USB_PU_PIN);
gpio_set_mode(USB_PU_PORT, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT,
USB_PU_PIN);
gpio_set_mode(USB_PU_PORT, GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, USB_PU_PIN);
gpio_set_mode(JTAG_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, TMS_DIR_PIN | TCK_PIN | TDI_PIN);
gpio_set_mode(JTAG_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_INPUT_FLOAT, TMS_PIN);
gpio_set_mode(JTAG_PORT, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL,
TMS_DIR_PIN | TMS_PIN | TCK_PIN | TDI_PIN);
gpio_set_mode(JTAG_PORT, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL,
TMS_DIR_PIN | TCK_PIN | TDI_PIN);
gpio_set_mode(JTAG_PORT, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_INPUT_FLOAT, TMS_PIN);
/* This needs some fixing... */
/* Toggle required to sort out line drivers... */
gpio_port_write(GPIOA, 0x8102);
@ -181,9 +175,7 @@ void platform_init(void)
gpio_clear(TCK_DIR_PORT, TCK_DIR_PIN);
}
gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL,
LED_UART | LED_IDLE_RUN | LED_ERROR);
gpio_set_mode(LED_PORT, GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, LED_UART | LED_IDLE_RUN | LED_ERROR);
/* Enable nRST output. Original uses a NPN to pull down, so setting the
* output HIGH asserts. Mini is directly connected so use open drain output
@ -191,40 +183,33 @@ void platform_init(void)
*/
platform_nrst_set_val(false);
gpio_set_mode(NRST_PORT, GPIO_MODE_OUTPUT_50_MHZ,
(((platform_hwversion() == 0) ||
(platform_hwversion() >= 3))
? GPIO_CNF_OUTPUT_PUSHPULL
: GPIO_CNF_OUTPUT_OPENDRAIN),
NRST_PIN);
(((platform_hwversion() == 0) || (platform_hwversion() >= 3)) ? GPIO_CNF_OUTPUT_PUSHPULL
: GPIO_CNF_OUTPUT_OPENDRAIN),
NRST_PIN);
/* FIXME: Gareth, Esden, what versions need this fix? */
if (platform_hwversion() < 3) {
if (platform_hwversion() < 3)
/* FIXME: This pin in intended to be input, but the TXS0108 fails
* to release the device from reset if this floats. */
gpio_set_mode(NRST_SENSE_PORT, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, NRST_SENSE_PIN);
} else {
gpio_set_mode(NRST_SENSE_PORT, GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, NRST_SENSE_PIN);
else {
gpio_set(NRST_SENSE_PORT, NRST_SENSE_PIN);
gpio_set_mode(NRST_SENSE_PORT, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_PULL_UPDOWN, NRST_SENSE_PIN);
gpio_set_mode(NRST_SENSE_PORT, GPIO_MODE_INPUT, GPIO_CNF_INPUT_PULL_UPDOWN, NRST_SENSE_PIN);
}
/* Enable internal pull-up on PWR_BR so that we don't drive
TPWR locally or inadvertently supply power to the target. */
if (platform_hwversion () == 1) {
if (platform_hwversion() == 1) {
gpio_set(PWR_BR_PORT, PWR_BR_PIN);
gpio_set_mode(PWR_BR_PORT, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_PULL_UPDOWN, PWR_BR_PIN);
gpio_set_mode(PWR_BR_PORT, GPIO_MODE_INPUT, GPIO_CNF_INPUT_PULL_UPDOWN, PWR_BR_PIN);
} else if (platform_hwversion() > 1) {
gpio_set(PWR_BR_PORT, PWR_BR_PIN);
gpio_set_mode(PWR_BR_PORT, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_OPENDRAIN, PWR_BR_PIN);
gpio_set_mode(PWR_BR_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, PWR_BR_PIN);
}
if (platform_hwversion() > 0) {
if (platform_hwversion() > 0)
adc_init();
} else {
else {
gpio_clear(GPIOB, GPIO0);
gpio_set_mode(GPIOB, GPIO_MODE_INPUT,
GPIO_CNF_INPUT_PULL_UPDOWN, GPIO0);
gpio_set_mode(GPIOB, GPIO_MODE_INPUT, GPIO_CNF_INPUT_PULL_UPDOWN, GPIO0);
}
/* Relocate interrupt vector table here */
extern int vector_table;
@ -235,9 +220,7 @@ void platform_init(void)
/* On hardware version 1 and 2, UART and SWD share connector pins.
* Don't enable UART if we're being debugged. */
if (platform_hwversion() == 0 ||
platform_hwversion() >= 3 ||
!(SCS_DEMCR & SCS_DEMCR_TRCENA))
if (platform_hwversion() == 0 || platform_hwversion() >= 3 || !(SCS_DEMCR & SCS_DEMCR_TRCENA))
usbuart_init();
setup_vbus_irq();