Merge pull request #286 from UweBonnes/h7

stm32h7: Start of support.

src/Makefile

@@ -54,6 +54,7 @@ SRC =			\
 	samd.c		\
 	stm32f1.c	\
 	stm32f4.c	\
+	stm32h7.c	\
 	stm32l0.c	\
 	stm32l4.c	\
 	swdptap.c	\

src/target/adiv5.c

@@ -171,6 +171,7 @@ static const struct {
 	{0x00b, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M0 BPU",  "(Breakpoint Unit)")},
 	{0x00c, aa_cortexm,   cidc_gipc,    PIDR_PN_BIT_STRINGS("Cortex-M4 SCS",  "(System Control Space)")},
 	{0x00d, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("CoreSight ETM11", "(Embedded Trace)")},
+	{0x00e, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M7 FBP",  "(Flash Patch and Breakpoint)")},
 	{0x490, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-A15 GIC", "(Generic Interrupt Controller)")},
 	{0x4c7, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M7 PPB",  "(Private Peripheral Bus ROM Table)")},
 	{0x906, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("CoreSight CTI",  "(Cross Trigger)")},
@@ -194,8 +195,10 @@ static const struct {
 	{0x95f, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-A15 PTM", "(Program Trace Macrocell)")},
 	{0x961, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("CoreSight TMC",  "(Trace Memory Controller)")},
 	{0x962, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("CoreSight STM",  "(System Trace Macrocell)")},
+	{0x975, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M7 ETM",  "(Embedded Trace)")},
 	{0x9a0, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("CoreSight PMU",  "(Performance Monitoring Unit)")},
 	{0x9a1, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M4 TPIU", "(Trace Port Interface Unit)")},
+	{0x9a9, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-M7 TPIU", "(Trace Port Interface Unit)")},
 	{0x9a5, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-A5 ETM",  "(Embedded Trace)")},
 	{0x9a7, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-A7 PMU",  "(Performance Monitor Unit)")},
 	{0x9af, aa_nosupport, cidc_unknown, PIDR_PN_BIT_STRINGS("Cortex-A15 PMU", "(Performance Monitor Unit)")},

src/target/cortexm.c

@@ -330,6 +330,7 @@ bool cortexm_probe(ADIv5_AP_t *ap)
 
 	PROBE(stm32f1_probe);
 	PROBE(stm32f4_probe);
+	PROBE(stm32h7_probe);
 	PROBE(stm32l0_probe);   /* STM32L0xx & STM32L1xx */
 	PROBE(stm32l4_probe);
 	PROBE(lpc11xx_probe);

src/target/stm32f4.c

@@ -99,6 +99,8 @@ static int stm32f4_flash_write(struct target_flash *f,
 #define F7_FLASHSIZE	0x1FF0F442
 #define F72X_FLASHSIZE	0x1FF07A22
 #define DBGMCU_IDCODE	0xE0042000
+#define DBGMCU_CR		0xE0042004
+#define DBG_SLEEP		(1 <<  0)
 #define ARM_CPUID	0xE000ED00
 
 #define AXIM_BASE 0x8000000
@@ -194,6 +196,11 @@ bool stm32f4_probe(target *t)
 			idcode = ID_STM32F40X;
 	}
 	switch(idcode) {
+	case ID_STM32F74X: /* F74x RM0385 Rev.4 */
+	case ID_STM32F76X: /* F76x F77x RM0410 */
+	case ID_STM32F72X: /* F72x F73x RM0431 */
+		target_mem_write32(t, DBGMCU_CR, DBG_SLEEP);
+		/* fallthrough */
 	case ID_STM32F40X:
 	case ID_STM32F42X: /* 427/437 */
 	case ID_STM32F46X: /* 469/479 */
@@ -204,9 +211,6 @@ bool stm32f4_probe(target *t)
 	case ID_STM32F412: /* F412     RM0402 Rev.4, 256 kB Ram */
 	case ID_STM32F401E: /* F401 D/E RM0368 Rev.3 */
 	case ID_STM32F413: /* F413     RM0430 Rev.2, 320 kB Ram, 1.5 MB flash. */
-	case ID_STM32F74X: /* F74x RM0385 Rev.4 */
-	case ID_STM32F76X: /* F76x F77x RM0410 */
-	case ID_STM32F72X: /* F72x F73x RM0431 */
 		t->idcode = idcode;
 		t->driver = stm32f4_get_chip_name(idcode);
 		t->attach = stm32f4_attach;

src/target/stm32h7.c

@@ -0,0 +1,486 @@
+/*
+ * This file is part of the Black Magic Debug project.
+ *
+ * Copyright (C) 2017-2018 Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This file implements STM32H7 target specific functions for detecting
+ * the device, providing the XML memory map and Flash memory programming.
+ *
+ * Refereces:
+ * ST doc - RM0433
+ *   Reference manual - STM32H7x3 advanced ARM®-based 32-bit MCUs Rev.3
+ */
+
+#include "general.h"
+#include "target.h"
+#include "target_internal.h"
+#include "cortexm.h"
+
+static bool stm32h7_cmd_erase_mass(target *t);
+/* static bool stm32h7_cmd_option(target *t, int argc, char *argv[]); */
+static bool stm32h7_uid(target *t);
+static bool stm32h7_crc(target *t);
+static bool stm32h7_cmd_psize(target *t, int argc, char *argv[]);
+
+const struct command_s stm32h7_cmd_list[] = {
+	{"erase_mass", (cmd_handler)stm32h7_cmd_erase_mass,
+	 "Erase entire flash memory"},
+/*	{"option", (cmd_handler)stm32h7_cmd_option,
+	"Manipulate option bytes"},*/
+	{"psize", (cmd_handler)stm32h7_cmd_psize,
+	 "Configure flash write parallelism: (x8|x16|x32|x64(default))"},
+	{"uid", (cmd_handler)stm32h7_uid, "Print unique device ID"},
+	{"crc", (cmd_handler)stm32h7_crc, "Print CRC of both banks"},
+	{NULL, NULL, NULL}
+};
+
+
+static int stm32h7_flash_erase(struct target_flash *f, target_addr addr,
+							   size_t len);
+static int stm32h7_flash_write(struct target_flash *f,
+                               target_addr dest, const void *src, size_t len);
+
+static const char stm32h74_driver_str[] = "STM32H74x";
+
+enum stm32h7_regs
+{
+	FLASH_ACR		= 0x00,
+	FLASH_KEYR		= 0x04,
+	FLASH_OPTKEYR	= 0x08,
+	FLASH_CR		= 0x0c,
+	FLASH_SR		= 0x10,
+	FLASH_CCR		= 0x14,
+	FLASH_OPTCR		= 0x18,
+	FLASH_OPTSR_CUR = 0x1C,
+	FLASH_OPTSR     = 0x20,
+	FLASH_CRCCR		= 0x50,
+	FLASH_CRCDATA	= 0x5C,
+};
+
+/* Flash Program and Erase Controller Register Map */
+#define H7_IWDG_BASE        0x58004c00
+#define FPEC1_BASE			0x52002000
+#define FPEC2_BASE			0x52002100
+#define FLASH_SR_BSY		(1 <<  0)
+#define FLASH_SR_WBNE		(1 <<  1)
+#define FLASH_SR_QW			(1 <<  2)
+#define FLASH_SR_CRC_BUSY	(1 <<  3)
+#define FLASH_SR_EOP		(1 << 16)
+#define FLASH_SR_WRPERR		(1 << 17)
+#define FLASH_SR_PGSERR		(1 << 18)
+#define FLASH_SR_STRBERR	(1 << 19)
+#define FLASH_SR_INCERR		(1 << 21)
+#define FLASH_SR_OPERR		(1 << 22)
+#define FLASH_SR_OPERR		(1 << 22)
+#define FLASH_SR_RDPERR		(1 << 23)
+#define FLASH_SR_RDSERR		(1 << 24)
+#define FLASH_SR_SNECCERR	(1 << 25)
+#define FLASH_SR_DBERRERR	(1 << 26)
+#define FLASH_SR_ERROR_READ	(FLASH_SR_RDPERR   | FLASH_SR_RDSERR  |	\
+							 FLASH_SR_SNECCERR |FLASH_SR_DBERRERR)
+#define FLASH_SR_ERROR_MASK	(										\
+		FLASH_SR_WRPERR  | FLASH_SR_PGSERR  | FLASH_SR_STRBERR |	\
+		FLASH_SR_INCERR  | FLASH_SR_OPERR    | FLASH_SR_ERROR_READ)
+#define FLASH_CR_LOCK		(1 << 0)
+#define FLASH_CR_PG			(1 << 1)
+#define FLASH_CR_SER		(1 << 2)
+#define FLASH_CR_BER		(1 << 3)
+#define FLASH_CR_PSIZE8		(0 << 4)
+#define FLASH_CR_PSIZE16	(1 << 4)
+#define FLASH_CR_PSIZE32	(2 << 4)
+#define FLASH_CR_PSIZE64	(3 << 4)
+#define FLASH_CR_FW			(1 << 6)
+#define FLASH_CR_START		(1 << 7)
+#define FLASH_CR_SNB_1		(1 << 8)
+#define FLASH_CR_SNB		(3 << 8)
+#define FLASH_CR_CRC_EN		(1 << 15)
+
+#define FLASH_OPTCR_OPTLOCK	(1 << 0)
+#define FLASH_OPTCR_OPTSTRT	(1 << 1)
+
+#define FLASH_OPTSR_IWDG1_SW	(1 <<  4)
+
+#define FLASH_CRCCR_ALL_BANK	(1 <<  7)
+#define FLASH_CRCCR_START_CRC	(1 << 16)
+#define FLASH_CRCCR_CLEAN_CRC	(1 << 17)
+#define FLASH_CRCCR_CRC_BURST_3	(3 << 20)
+
+#define KEY1 0x45670123
+#define KEY2 0xCDEF89AB
+
+#define OPTKEY1 0x08192A3B
+#define OPTKEY2 0x4C5D6E7F
+
+#define DBGMCU_IDCODE	0x5c001000
+/* Access via 0xe00e1000 does not show device! */
+#define DBGMCU_CR		(DBGMCU_IDCODE + 4)
+#define DBGSLEEP_D1		(1 << 0)
+#define DBGSTOP_D1		(1 << 1)
+#define DBGSTBY_D1		(1 << 2)
+#define DBGSTOP_D3		(1 << 7)
+#define DBGSTBY_D3		(1 << 8)
+#define D1DBGCKEN		(1 << 21)
+#define D3DBGCKEN		(1 << 22)
+
+
+#define FLASH_SIZE_REG 	0x1ff1e880
+
+#define BANK1_START 		0x08000000
+#define NUM_SECTOR_PER_BANK 8
+#define FLASH_SECTOR_SIZE 	0x20000
+#define BANK2_START         0x08100000
+enum ID_STM32H7 {
+	ID_STM32H74x  = 0x450,
+};
+
+struct stm32h7_flash {
+	struct target_flash f;
+	enum align psize;
+	uint32_t regbase;
+};
+
+static void stm32h7_add_flash(target *t,
+                              uint32_t addr, size_t length, size_t blocksize)
+{
+	struct stm32h7_flash *sf = calloc(1, sizeof(*sf));
+	struct target_flash *f =  &sf->f;
+	f->start = addr;
+	f->length = length;
+	f->blocksize = blocksize;
+	f->erase = stm32h7_flash_erase;
+	f->write = stm32h7_flash_write;
+	f->buf_size = 2048;
+	f->erased = 0xff;
+	sf->regbase = FPEC1_BASE;
+	if (addr >= BANK2_START)
+		sf->regbase = FPEC2_BASE;
+	sf->psize = ALIGN_DWORD;
+	target_add_flash(t, f);
+}
+
+bool stm32h7_probe(target *t)
+{
+	uint32_t idcode = target_mem_read32(t, DBGMCU_IDCODE) & 0xFFF;
+	if (idcode == ID_STM32H74x) {
+		/* RM0433 Rev 4 is not really clear, what bits are needed.
+		 * Set all possible relevant bits for now. */
+		target_mem_write32(t, DBGMCU_CR, DBGSLEEP_D1 | D1DBGCKEN);
+		t->idcode = idcode;
+		t->driver = stm32h74_driver_str;
+		target_add_commands(t, stm32h7_cmd_list, stm32h74_driver_str);
+		target_add_ram(t, 0x00000000, 0x10000); /* ITCM Ram,  64 k */
+		target_add_ram(t, 0x20000000, 0x20000); /* DTCM Ram, 128 k */
+		target_add_ram(t, 0x24000000, 0x80000); /* AXI Ram,  512 k */
+		target_add_ram(t, 0x30000000, 0x20000); /* AHB SRAM1, 128 k */
+		target_add_ram(t, 0x32000000, 0x20000); /* AHB SRAM2, 128 k */
+		target_add_ram(t, 0x34000000, 0x08000); /* AHB SRAM3,  32 k */
+		target_add_ram(t, 0x38000000, 0x01000); /* AHB SRAM4,  32 k */
+		stm32h7_add_flash(t, 0x8000000, 0x100000, FLASH_SECTOR_SIZE);
+		stm32h7_add_flash(t, 0x8100000, 0x100000, FLASH_SECTOR_SIZE);
+	/* If IWDG runs as HARDWARE watchdog (44.3.4) erase
+	 * will be aborted by the Watchdog and erase fails!
+	 * Setting IWDG_KR to 0xaaaa does not seem to help!*/
+		uint32_t optsr = target_mem_read32(t, FPEC1_BASE + FLASH_OPTSR);
+		if (!(optsr & FLASH_OPTSR_IWDG1_SW))
+			tc_printf(t, "Hardware IWDG running. Expect failure. Set IWDG1_SW!");
+		return true;
+	}
+	return false;
+}
+
+static bool stm32h7_flash_unlock(target *t, uint32_t addr)
+{
+	uint32_t regbase = FPEC1_BASE;
+	if (addr >= BANK2_START) {
+		regbase = FPEC2_BASE;
+	}
+
+	while(target_mem_read32(t, regbase + FLASH_SR) & FLASH_SR_BSY) {
+		if(target_check_error(t))
+			return false;
+	}
+	uint32_t sr = target_mem_read32(t, regbase + FLASH_SR);
+	if (sr & FLASH_SR_ERROR_MASK) {
+		tc_printf(t, "Error 0x%08lx", sr & FLASH_SR_ERROR_MASK);
+		target_mem_write32(t, regbase + FLASH_CCR, sr & FLASH_SR_ERROR_MASK);
+		return false;
+	}
+	if (target_mem_read32(t, regbase + FLASH_CR) & FLASH_CR_LOCK) {
+		/* Enable FLASH controller access */
+		target_mem_write32(t, regbase + FLASH_KEYR, KEY1);
+		target_mem_write32(t, regbase + FLASH_KEYR, KEY2);
+	}
+	if (target_mem_read32(t, regbase + FLASH_CR) & FLASH_CR_LOCK)
+		return false;
+	else
+		return true;
+}
+
+static int stm32h7_flash_erase(struct target_flash *f, target_addr addr,
+							   size_t len)
+{
+	target *t = f->t;
+	struct stm32h7_flash *sf = (struct stm32h7_flash *)f;
+	if (stm32h7_flash_unlock(t, addr) == false)
+		return -1;
+	/* We come out of reset with HSI 64 MHz. Adapt FLASH_ACR.*/
+	target_mem_write32(t, sf->regbase + FLASH_ACR, 0);
+	addr &= (NUM_SECTOR_PER_BANK * FLASH_SECTOR_SIZE) - 1;
+	int start_sector =  addr / FLASH_SECTOR_SIZE;
+	int end_sector   = (addr + len - 1) / FLASH_SECTOR_SIZE;
+
+	enum align psize = ((struct stm32h7_flash *)f)->psize;
+	uint32_t sr;
+	while (start_sector <= end_sector) {
+		uint32_t cr = (psize * FLASH_CR_PSIZE16) | FLASH_CR_SER |
+			(start_sector * FLASH_CR_SNB_1);
+		target_mem_write32(t, sf->regbase + FLASH_CR, cr);
+		cr |= FLASH_CR_START;
+		target_mem_write32(t, sf->regbase + FLASH_CR, cr);
+		DEBUG(" started cr %08" PRIx32 " sr %08" PRIx32 "\n",
+			  target_mem_read32(t, sf->regbase + FLASH_CR),
+			  target_mem_read32(t, sf->regbase + FLASH_SR));
+		do {
+			sr = target_mem_read32(t, sf->regbase + FLASH_SR);
+			if (target_check_error(t)) {
+				DEBUG("stm32h7_flash_erase: comm failed\n");
+				return -1;
+			}
+//			target_mem_write32(t, H7_IWDG_BASE, 0x0000aaaa);
+		}while (sr & (FLASH_SR_QW | FLASH_SR_BSY));
+		if (sr & FLASH_SR_ERROR_MASK) {
+			DEBUG("stm32h7_flash_erase: error, sr: %08" PRIx32 "\n", sr);
+			return -1;
+		}
+		start_sector++;
+	}
+	return 0;
+}
+
+static int stm32h7_flash_write(struct target_flash *f, target_addr dest,
+                               const void *src, size_t len)
+{
+	target *t = f->t;
+	struct stm32h7_flash *sf = (struct stm32h7_flash *)f;
+	enum align psize = sf->psize;
+	if (stm32h7_flash_unlock(t, dest) == false)
+		return -1;
+	uint32_t cr = psize * FLASH_CR_PSIZE16;
+	target_mem_write32(t, sf->regbase + FLASH_CR, cr);
+	cr |= FLASH_CR_PG;
+	target_mem_write32(t, sf->regbase + FLASH_CR, cr);
+	/* does H7 stall?*/
+	uint32_t sr_reg = sf->regbase + FLASH_SR;
+	uint32_t sr;
+	target_mem_write(t, dest, src, len);
+	while ((sr = target_mem_read32(t, sr_reg)) & FLASH_SR_BSY) {
+		if(target_check_error(t)) {
+			DEBUG("stm32h7_flash_write: BSY comm failed\n");
+			return -1;
+		}
+	}
+	if (sr & FLASH_SR_ERROR_MASK) {
+		DEBUG("stm32h7_flash_write: error sr %08" PRIx32 "\n", sr);
+		return -1;
+	}
+	/* Close write windows.*/
+	target_mem_write32(t, sf->regbase + FLASH_CR, 0);
+	return 0;
+}
+
+/* Both banks are erased in parallel.*/
+static bool stm32h7_cmd_erase(target *t, int bank_mask)
+{
+	const char spinner[] = "|/-\\";
+	int spinindex = 0;
+	bool do_bank1 = bank_mask & 1, do_bank2 = bank_mask & 2;
+	uint32_t cr;
+	bool result = false;
+	enum align psize = ALIGN_DWORD;
+	for (struct target_flash *f = t->flash; f; f = f->next) {
+		if (f->write == stm32h7_flash_write) {
+			psize = ((struct stm32h7_flash *)f)->psize;
+		}
+	}
+	cr = (psize * FLASH_CR_PSIZE16) | FLASH_CR_BER | FLASH_CR_START;
+	/* Flash mass erase start instruction */
+	if (do_bank1) {
+		if (stm32h7_flash_unlock(t, BANK1_START) == false) {
+			DEBUG("ME: Unlock bank1 failed\n");
+			goto done;
+		}
+		uint32_t regbase = FPEC1_BASE;
+		/* BER and start can be merged (3.3.10).*/
+		target_mem_write32(t, regbase + FLASH_CR, cr);
+		DEBUG("ME bank1 started\n");
+	}
+	if (do_bank2) {
+		if (stm32h7_flash_unlock(t, BANK2_START) == false) {
+			DEBUG("ME: Unlock bank2 failed\n");
+			goto done;
+		}
+		uint32_t regbase = FPEC2_BASE;
+		/* BER and start can be merged (3.3.10).*/
+		target_mem_write32(t, regbase + FLASH_CR, cr);
+		DEBUG("ME bank2 started\n");
+	}
+
+	/* Read FLASH_SR to poll for QW bit */
+	if (do_bank1) {
+		uint32_t regbase = FPEC1_BASE;
+		while (target_mem_read32(t, regbase + FLASH_SR) & FLASH_SR_QW) {
+//			target_mem_write32(t, H7_IWDG_BASE, 0x0000aaaa);
+			tc_printf(t, "\b%c", spinner[spinindex++ % 4]);
+			if(target_check_error(t)) {
+				DEBUG("ME bank1: comm failed\n");
+				goto done;
+			}
+		}
+	}
+	if (do_bank2) {
+		uint32_t regbase = FPEC2_BASE;
+		while (target_mem_read32(t, regbase + FLASH_SR) & FLASH_SR_QW) {
+//			target_mem_write32(t, H7_IWDG_BASE 0x0000aaaa);
+			tc_printf(t, "\b%c", spinner[spinindex++ % 4]);
+			if(target_check_error(t)) {
+				DEBUG("ME bank2: comm failed\n");
+				goto done;
+			}
+		}
+	}
+
+	if (do_bank1) {
+		/* Check for error */
+		uint32_t regbase = FPEC1_BASE;
+		uint32_t sr = target_mem_read32(t, regbase + FLASH_SR);
+		if (sr & FLASH_SR_ERROR_MASK) {
+			DEBUG("ME bank1: sr %" PRIx32 "\n", sr);
+			goto done;
+		}
+	}
+	if (do_bank2) {
+		/* Check for error */
+		uint32_t regbase = FPEC2_BASE;
+		uint32_t sr = target_mem_read32(t, regbase + FLASH_SR);
+		if (sr & FLASH_SR_ERROR_MASK) {
+			DEBUG("ME bank2: sr %" PRIx32 "\n", sr);
+			goto done;
+		}
+	}
+	result = true;
+  done:
+	tc_printf(t, "\n");
+	return result;
+}
+
+static bool stm32h7_cmd_erase_mass(target *t)
+{
+	tc_printf(t, "Erasing flash... This may take a few seconds.  ");
+	return stm32h7_cmd_erase(t, 3);
+}
+
+/* Print the Unique device ID.
+ * Can be reused for other STM32 devices With uid as parameter.
+ */
+static bool stm32h7_uid(target *t)
+{
+	uint32_t uid = 0x1ff1e800;
+	int i;
+	tc_printf(t, "0x");
+	for (i = 0; i < 12; i = i + 4) {
+		uint32_t val = target_mem_read32(t, uid + i);
+		tc_printf(t, "%02X", (val >> 24) & 0xff);
+		tc_printf(t, "%02X", (val >> 16) & 0xff);
+		tc_printf(t, "%02X", (val >>  8) & 0xff);
+		tc_printf(t, "%02X", (val >>  0) & 0xff);
+	}
+	tc_printf(t, "\n");
+	return true;
+}
+static int stm32h7_crc_bank(target *t, uint32_t bank)
+{
+	uint32_t regbase = FPEC1_BASE;
+	if (bank >= BANK2_START)
+		regbase = FPEC2_BASE;
+
+	if (stm32h7_flash_unlock(t, bank) == false)
+			return -1;
+	uint32_t cr = FLASH_CR_CRC_EN;
+	target_mem_write32(t, regbase + FLASH_CR, cr);
+	uint32_t crccr= FLASH_CRCCR_CRC_BURST_3 |
+		FLASH_CRCCR_CLEAN_CRC | FLASH_CRCCR_ALL_BANK;
+	target_mem_write32(t, regbase + FLASH_CRCCR, crccr);
+	target_mem_write32(t, regbase + FLASH_CRCCR, crccr | FLASH_CRCCR_START_CRC);
+	uint32_t sr;
+	while ((sr = target_mem_read32(t, regbase + FLASH_SR)) & FLASH_SR_CRC_BUSY) {
+		if(target_check_error(t)) {
+			DEBUG("CRC bank %d: comm failed\n", (bank < BANK2_START) ? 1 : 2);
+			return -1;
+		}
+		if (sr & FLASH_SR_ERROR_READ) {
+			DEBUG("CRC bank %d: error sr %08" PRIx32 "\n",
+				  (bank < BANK2_START) ? 1 : 2, sr);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static bool stm32h7_crc(target *t)
+{
+	if (stm32h7_crc_bank(t, BANK1_START) ) return false;
+	uint32_t crc1 = target_mem_read32(t, FPEC1_BASE + FLASH_CRCDATA);
+	if (stm32h7_crc_bank(t, BANK2_START) ) return false;
+	uint32_t crc2 = target_mem_read32(t, FPEC1_BASE + FLASH_CRCDATA);
+	tc_printf(t, "CRC: bank1 0x%08lx, bank2 0x%08lx\n", crc1, crc2);
+	return true;
+}
+static bool stm32h7_cmd_psize(target *t, int argc, char *argv[])
+{
+	if (argc == 1) {
+		enum align psize = ALIGN_DWORD;
+		for (struct target_flash *f = t->flash; f; f = f->next) {
+			if (f->write == stm32h7_flash_write) {
+				psize = ((struct stm32h7_flash *)f)->psize;
+			}
+		}
+		tc_printf(t, "Flash write parallelism: %s\n",
+		          psize == ALIGN_DWORD ? "x64" :
+		          psize == ALIGN_WORD  ? "x32" :
+				  psize == ALIGN_HALFWORD ? "x16" : "x8");
+	} else {
+		enum align psize;
+		if (!strcmp(argv[1], "x8")) {
+			psize = ALIGN_BYTE;
+		} else if (!strcmp(argv[1], "x16")) {
+			psize = ALIGN_HALFWORD;
+		} else if (!strcmp(argv[1], "x32")) {
+			psize = ALIGN_WORD;
+		} else if (!strcmp(argv[1], "x64")) {
+			psize = ALIGN_DWORD;
+		} else {
+			tc_printf(t, "usage: monitor psize (x8|x16|x32|x64)\n");
+			return false;
+		}
+		for (struct target_flash *f = t->flash; f; f = f->next) {
+			if (f->write == stm32h7_flash_write) {
+				((struct stm32h7_flash *)f)->psize = psize;
+			}
+		}
+	}
+	return true;
+}

src/target/target_internal.h

@@ -161,6 +161,7 @@ int tc_system(target *t, target_addr cmd, size_t cmdlen);
  */
 bool stm32f1_probe(target *t);
 bool stm32f4_probe(target *t);
+bool stm32h7_probe(target *t);
 bool stm32l0_probe(target *t);
 bool stm32l1_probe(target *t);
 bool stm32l4_probe(target *t);