Allen Ibara
813622b1b6
LPC43XX: Add mkboot target command; dont make banks bootable by default.
...
This used to be done transparently in the write step, however that
breaks the 'verify' command. This is also more flexible for cases
where you want to write a flash bank without ever intending it to
be bootable.
2014-01-10 13:24:25 -08:00
Allen Ibara
29c7846612
LPC43XX: Make sure to align target struct to word alignment
2014-01-10 13:24:25 -08:00
Frantisek Burian
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
Gareth McMullin
8835df1822
Merge remote-tracking branch 'origin/usbuart_highrate'
2013-12-04 16:16:08 +13:00
Gareth McMullin
42570efaf8
Revert "STM32F4: Add handling of second bank and dual boot devices."
...
This reverts commit 536482f804
.
2013-10-22 07:48:06 +08:00
Uwe Bonnes
09fbe783c5
f4discovery: Limit clock to 48 MHz and stack 24 kiByte so that code can be compiled unchanged for F401Discovery too.
...
TODO: Bump clk up to 84 MHz as soon as libopencm3 supports that speed.
2013-10-22 07:26:35 +08:00
Uwe Bonnes
536482f804
STM32F4: Add handling of second bank and dual boot devices.
2013-10-22 07:21:35 +08:00
Uwe Bonnes
cbd73cfb8f
STM32F4: Recognize F401.
2013-10-22 07:21:35 +08:00
Uwe Bonnes
5aa802969b
stlink: Give the NRST check more time as otherwise some L1 discovery board stayed in the bootloader.
2013-10-22 07:18:09 +08:00
Uwe Bonnes
086f3565f0
stm32f1: Fix handling of option byte write. Write needs to happend on erased option bytes.
2013-10-20 16:14:25 +02:00
Uwe Bonnes
15e529a43a
stm32f1.c: On a read protected device, deny any other option action than erase.
...
Otherwise the first option action triggers an error, inhibiting further option
actions.
2013-10-20 16:14:19 +02:00
Michael Tharp
c395c6f73a
Configure SRST output as open-drain for BMP Mini hardware
2013-10-05 13:14:03 +08:00
Benno Leslie
3cce6f472c
Add support for the SYS_WRITEC semihosting operation.
...
This is implemented in the same manner as QEMU semihosting
support, specifically, a SYS_WRITEC results in a single
character write to STDERR.
2013-10-05 13:14:03 +08:00
Richard Eoin Meadows
b8f9a2ed4b
Bugfix: Always apply the vector table magic number correctly.
...
Previously when the flash write length was less than the Chunk size the 2nd chunk write would re-calculate and apply an incorrect magic number
2013-10-05 13:14:03 +08:00
Marc Singer
40820a2354
Added internal pull-up to PWR_BR.
...
o Prevent probe from inadvertently powering target. If PWR_BR is
allowed to float, the gate on Q1 (blackmagic_mini) will tend to be
close enough to zero to turn the transistor on. We activate the
internal pull-up on this IO pin to force the transistor off.
2013-10-05 13:14:03 +08:00
Gareth McMullin
e5d253bf81
Merge pull request #24 from richardeoin/master
...
New contrib board
2013-10-04 21:33:39 -07:00
BuFran
e67192348f
FIX: usbd_init compatibility fix
...
Updated compatibility with libopencm3 commit 113e5c22e6390ba072148315e83a5faa5ff7ce86
2013-10-05 12:23:23 +08:00
BuFran
c857165c12
FIX: FLASH_* collision with libopencm3 definitions
...
Resolve collision to FLASH_* from the libopencm3 by adding STM32F1_ prefix to the L1's
2013-10-05 12:23:23 +08:00
BuFran
c28350f242
FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new library
...
The use of u8, u16, u32 has been deprecated in libopencm3.
Update it with standard uint8_t, uint16_t, uint32_t types
2013-10-05 12:23:23 +08:00
BuFran
f1584b266b
[BUILD] Don't throw error on already cleaned output
2013-10-05 12:23:23 +08:00
BuFran
78464c8562
[LIB] Updated to newest libopencm3
2013-10-05 12:23:23 +08:00
Richard Eoin Meadows
e5e67e5740
Made assembly notes titles
2013-09-04 22:07:08 +01:00
Richard Eoin Meadows
c04ccf3ccc
Tided up README, added note about board being proven
2013-09-04 22:05:14 +01:00
Richard Eoin Meadows
ead74c272a
Added assembly descriptions
2013-09-04 21:11:32 +01:00
Richard Eoin Meadows
ac2bc70edc
Fixed Assembly photo
2013-09-04 21:03:37 +01:00
Richard Eoin Meadows
523dbb5df9
Added photos
2013-09-04 21:01:42 +01:00
Richard Eoin Meadows
28dca4702a
Added more description about the BOOT0 pin
2013-09-04 20:46:48 +01:00
Richard Eoin Meadows
1ca1c6c470
Added assembly photos
2013-09-04 20:28:22 +01:00
Richard Eoin Meadows
3ebec5609f
Made all the board layers visible
2013-09-04 20:28:06 +01:00
Richard Eoin Meadows
bcea91a825
Renamed schematic PDF
2013-09-04 20:22:20 +01:00
Richard Eoin Meadows
af3f20a218
Fixed line endings in README
2013-08-19 15:41:31 +01:00
Richard Eoin Meadows
be5e9b1ff8
Spelling error!
2013-08-19 15:38:23 +01:00
Richard Eoin Meadows
682138e321
Added pdf of schematic
2013-08-19 15:37:36 +01:00
Richard Eoin Meadows
4567011603
Fixed relative link in README
2013-08-19 15:36:13 +01:00
Richard Eoin Meadows
7a6879c93d
Removed mouse cursor from board image!
2013-08-19 15:34:18 +01:00
Richard Eoin Meadows
3735f263f3
Fixed image in README
2013-08-19 15:32:52 +01:00
Richard Eoin Meadows
3828bae844
Added image to README
2013-08-19 15:31:44 +01:00
Richard Eoin Meadows
73139a77b7
Fixed up README
2013-08-19 15:21:36 +01:00
Richard Eoin Meadows
7e7ebfc2be
Wrote README text
2013-08-19 15:20:23 +01:00
Richard Eoin Meadows
2f59e9f3a3
Added switch on BOOT0
2013-08-19 15:04:56 +01:00
Richard Eoin Meadows
2480162c07
Changed text on the end of the board to "ARM Cortex Debug"
2013-08-19 14:26:39 +01:00
Richard Eoin Meadows
80c215627d
Added links to parts list
2013-08-19 13:45:31 +01:00
Richard Eoin Meadows
1042246ee6
Fixed final list of parts list
2013-08-19 13:30:36 +01:00
Richard Eoin Meadows
e8a423972f
Completed parts list
2013-08-19 13:24:03 +01:00
Richard Eoin Meadows
168a15e3ae
Completed board layout
2013-08-19 12:49:54 +01:00
Richard Eoin Meadows
b3dedacbf5
Schematic provisionally complete
2013-08-19 10:41:14 +01:00
Gareth McMullin
700833f38f
Use do {...} while(0) for PLATFORM_FATAL_ERROR() macro.
2013-08-19 12:27:36 +12:00
Gareth McMullin
fce43bcd98
Fixed upgrade tool to build against current libusb-win32.
2013-08-19 12:26:05 +12:00
Richard Eoin Meadows
3f6937affa
Attempt to fix table
2013-08-18 22:38:52 +01:00
Richard Eoin Meadows
de22b4577d
Added LEDs
2013-08-18 22:35:49 +01:00