Uwe Bonnes
f9d343af3e
cmsis: AP reads are posted. Read from RDBUFF.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
d4ae308f9f
cmsis: implement srst_set_val()
2021-10-31 12:55:41 +01:00
Uwe Bonnes
166eb3ee3e
cmsis_dap: Always transfer 65 bytes with hid_read|write()
...
CMSIS-DAP Dragonprobe works on some devices. E.g. it does not work
on NUCLEO-F103
2021-10-31 12:55:41 +01:00
Uwe Bonnes
b343ebe06f
cmsis-dap/linux: Link against libhidapi-hidraw
...
libhidapi-libusb detaches a kernel module but does not reattach again.
This may wrack interaction with other programs using hidapi.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
d144f9d54b
adiv5: CMSIS DAP transactions are slow but work in principle
...
Slowness results in strange STM32F767 DHCSR implementation to nearly never
halt in the given 2 second period when F767 is sleeping most of the time.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
761e0230d4
cmsis-dap: Print messages when transfers fail.
...
Expect signal integrity errors when using jumper cables. Often probes switch
the SWJ GPIO with highest speed, resulting in possible reflections. Additional
ground wires may help. If there is isolation between probe and targets,
additional ground wires are a must or ground shift will wrack the transfer!
2021-10-31 12:55:41 +01:00
Uwe Bonnes
39fbffd3d2
stlinkv2: Fix low access to AP registers.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
c13778139f
adiv5/hosted: Export the BMP_TYPE in DP.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
b7e7aa3f9a
adiv5: Either use only LL functions in cortexm_initial_halt or no LL at all.
...
Platform implementation may disturb ADIV5_AP_DRW and so low_read DHCSR may
give values other from registers
2021-10-31 12:55:41 +01:00
Uwe Bonnes
485105221e
dap: Always work on a copy of the buffer when calling dbg_dap_cmd() in a loop
...
A better solution would use seperate buffers for dbg_dap_cmd. But as WAIT is
already handled in DAP, cahnces are low that loop re-entry is needed.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
397fbd5749
cmsis: Only cmsis internal use must differentiate between HID and Bulk access
...
Missing DAP_SWD_SEQUENCE may eventually need a distinction visible from
outside later.
2021-10-31 12:55:41 +01:00
Uwe Bonnes
7b1eb6e6e3
bmp_libusb: reset type on every device.
2021-10-31 12:53:47 +01:00
Uwe Bonnes
80064c18a9
bmp_libusb: Fix CMSIS-DAP related memory leak.
2021-10-31 11:13:34 +01:00
Uwe Bonnes
8845a22226
stm32l4: Use targetid when available.
...
Fixes STM32U5 from crashing.
2021-10-31 11:13:34 +01:00
Uwe Bonnes
c4b6b42dcf
stlinkv2: Read targetid on DPv2 devices.
2021-10-31 11:13:34 +01:00
Uwe Bonnes
5dafc0828c
SWD: Remove excessive line resets.
2021-10-31 11:12:46 +01:00
Uwe Bonnes
e7e1bfdb53
mpsse: Fix using 60 MHz clock on fast devices.
2021-10-30 13:55:57 +02:00
Uwe Bonnes
99a5fdb6f8
bmp_remote: Better error propagation.
...
Negative values from platform_buffer_read are errors too!
2021-10-30 13:55:57 +02:00
Uwe Bonnes
f4117aa1b4
cdcacm: Use the USB strings.
2021-10-30 13:55:57 +02:00
Uwe Bonnes
f28f05952f
stlink: Add another STLINK-V3 ID.
2021-10-30 13:55:57 +02:00
SG
7307f086c6
Support for STM32WB55 ( #942 )
...
* add STM32WB55 support
2021-10-30 13:01:06 +02:00
Uwe Bonnes
e1a928beb1
Fixes to compile with gcc11 #925
...
Target code changes are pure for formal correctness and not tested!
2021-10-10 15:59:57 +02:00
UweBonnes
28623e6b27
Merge pull request #939 from fabalthazar/hosted-return-val
...
Consistent return value and output of hosted blackmagic + HOSTED_BMP_ONLY=0 on Linux
2021-10-10 12:54:48 +02:00
fabalthazar
e2d3161442
Removed -S message as debugger selection option since it is used for reading bytes
2021-10-09 21:38:48 +02:00
fabalthazar
59282b6f66
Fixed typography
2021-10-09 21:18:52 +02:00
fabalthazar
7274f55ff4
Fixed return value of hosted blackmagic in erase mode
2021-10-09 21:17:58 +02:00
fabalthazar
3f54fba986
HOSTED_BMP_ONLY=0 by default on Linux.
...
The user is warned about missing dependencies.
2021-10-09 21:14:52 +02:00
Vegard Storheil Eriksen
7ccbdd98c0
hosted/dap: Copy command buffer in wait/retry loop.
...
The same buffer is used for both command and response, causing part of
the command to be overwritten before it’s retried. Solve this by saving
and restoring a copy of the command before retrying.
2021-10-05 23:21:07 +02:00
Jeff Lutgen
f69f29a660
f4discovery/blackpill: fix usbusart
2021-10-01 00:10:03 +02:00
Uwe Bonnes
b076d5cea1
stm32f1: Check if unlock failed and propagate error.
2021-09-22 21:41:43 +02:00
Uwe Bonnes
554e34517e
Better reporting when monitor command fails.
2021-09-22 21:41:43 +02:00
Uwe Bonnes
9e98cfa220
adiv5: Remove leftover debug output.
2021-09-22 21:41:43 +02:00
Thiadmer Riemersma
64f756d627
Test voltage on VREF before enabling target power (mon tpwr), to avoid potential power conflict.
2021-09-22 20:45:18 +02:00
Uwe Bonnes
356325f563
ftdi_bmp: Fix bit select.
2021-09-22 15:16:20 +02:00
Uwe Bonnes
79066c950f
bmp_libusb: Remove duplicated libusb_init.
...
Thanks to Red Liu for noticing
2021-09-22 15:16:20 +02:00
Uwe Bonnes
9ebc44bcea
Make more functions static.
2021-09-22 15:16:20 +02:00
Uwe Bonnes
db1f13db25
remote: Packets may be larger than 256 bytes.
2021-09-22 15:16:20 +02:00
Uwe Bonnes
88cce08ce4
hosted: Fix "monitor version"
2021-09-22 15:16:20 +02:00
Uwe Bonnes
da15cc3cb7
remote_jtagtap: Fix memory corruption in jtagtap_tdi_tdo_seq
2021-09-22 15:16:20 +02:00
Uwe Bonnes
a93e57e112
ftdi: Fixed wrong direction report in DEBUG.
2021-09-22 15:16:20 +02:00
Uwe Bonnes
9de69bb3ab
Adiv5/Initial halt: More fixes for dd28fa5743
. #925
...
Stlink does not like low level access and aborts with STLINK_SWD_DP_ERROR.
Either our implementation still has faults or stlink can not handle
MINDP devices with BMP/Firmware also seemm not to like low level access,
either du to some hidden error in BMP or by design
2021-09-22 15:16:20 +02:00
Uwe Bonnes
a9854e9b37
adiv5: Fix the MINDP case introduced with dd28fa5743
#925
2021-09-16 12:39:26 +02:00
Andy Makovec
01583560cd
hosted: Update Readme.md to use HOSTED_BMP_ONLY
2021-09-16 11:02:31 +02:00
dpc
f66caa0d29
add some more nxp s32k14x variants
...
the sdid bits correspond to s32k14x as well as s32k11x but i only have
access to the k14x variants so didn't bother w/ the k11x variants.
the memory/flash sizes also can come from the sdid bits, but the
splits still need to come from a lookup.
2021-09-13 23:01:05 +02:00
dpc
95288bcf75
fix a size format warning
2021-09-13 23:01:05 +02:00
Uwe Bonnes
e58b7d623b
crc32: Abort generic_crc32 with error from target_mem_read
...
Use larger chunks for hosted to speed up. Send pure NULL as line keep-alive.
2021-09-07 10:57:17 +02:00
Uwe Bonnes
ff79108f66
cl_utils: Increase worksize for increased speed.
...
H743 reads 2 MB in ~23 vs 27 seconds
2021-09-07 10:57:17 +02:00
Uwe Bonnes
a76a559656
pc/platform_delay: Wait ms and not us!
2021-09-07 10:57:17 +02:00
Uwe Bonnes
dd28fa5743
adiv5: Tighten up loop to initial halt cortexm
...
Use TRNCNT when available.
Now the F767 with the NutOS 300 ms sleep example with the one ms tick is
halted even in hosted after few ms.
2021-09-04 21:15:07 +02:00
Uwe Bonnes
a297c8c8ad
hosted/Makefile.inc: Use gcc to build hosted, if not advised otherwise
2021-09-04 21:15:07 +02:00